Image Count Reset does not?

Similar Questions

• I can't log in to my account to Mozilla, and Password Reset does not work.

  I have an account to create themes and Mozilla Add-ons, but now it seems inactive,
  and password reset does not work. Here is one of my themes:
  https://addons.Mozilla.org/en-us/Firefox/addon/Fox-December/
  my email: [email protected]

  Support for the site Add - ons are here:
  https://discourse.Mozilla-community.org/c/Add-ons

• Factory reset does not work

  I have a Nighthawk X 8 I bought two months ago. Up to today (March 7), it worked fine. Today I came home and found it did not work. I tried to access it via routerlogin.net, nothing worked. I tried factory reset using a toothpick about 5 times now, but it doesn't seem to matter. my computer (connected via ethernet) does not allow me to set it up, and I'm not wireless. The power button remains mostly orange, but it seems resets automatically once in a while.

  I tried to call customer service, but they hung up on me while starting to record my router midsentence. I'm afraid I'll need a RMA number, unless someone can tell me why reset does not work. I tried to do it for 8 seconds (directions say that), longer, several times, while it was turned on, turned off, both, etc. None of this helps.

  If I can't get the factory reset to work, is there a way to set up an RMA number without appeal? After the initial CS hangup, I was told that I would be on the phone for an hour, waiting for relief.

  I ended up doing an RMA number. Got my new unit and it is working fine now. If all goes well, he will not leave in like the last 2 months...

• My image that icon does not appear in the e-mail

  My image that icon does not appear in the messaging section. When I click on the place where the photo should be, it is said: the contact does not exist. I use a Moto X 2nd Gen on Republic cordless phone.

  You have a contact for yourself - probably mapped to your connection to google?

• Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

  Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

  Hello

  Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
  Cihan

• "The cover image you selected does not fit this folio." - but should be.

  I get the error message.

  "An error occurred during the loading of an image. The cover image you selected does not fit this folio. There must be no more to 1024px in height and width 768px. »

  Jpg files horizontal and vertical I'm trying to download for coverage are exactly the 1024 x 768 and vice versa. I have tred exporting to different presets and resoluitions and Folio Builder still will not accept them.

  I know I ran this problem before and I have searched for it in this forum thinking it would have been displayed in all but impossible to find aynthing - sorry if I'm double posting.

  I think I realized my problem... I got 96 DPI selected, when it should have been 72. stupid.

• Images and formatting does not not for some sites

  I noticed problems with some sites Web does not image or page formatting. These sites have worked in the past.

  Two examples:

  www.theoatmeal.com - site will load all images (png and .jpgs). I checked the options recommended for images is not displayed and you've run through all except Firefox reset to the factory settings.

  www.patheos.com - site displays only the basic text on a white background. It displays however images (.jpgs). It also displays a message at the top of the screen that I'm running an outdated version of Internet Explorer.

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Have you checked for possible exceptions of image?

  You can try to use "Clear recent history" to clear all "Site preferences".

  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  Is he missing pictures then make sure you are not block images from certain domains.

  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  Make sure that you do not block the images of third parties, the pref permissions.default.image must be 1.

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load

• Security issues 'reset' does not appear when I try to change the questions

  I am trying to change my account email address, but I don't remember the answers to the questions. I tried to change the questions but it gives me the ability to reset my questions

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (142998)

• Qosmio G30-154 and 155 - image Enhancement Utility does not work

  I read the

  wire https://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=21006
  as I have such a problem.

  I installed Picture Enhancement Utility and when I started the application I got an error

  * This application does not work on the current version of BIOS system * and stored program settings are not saved.

  My BIOS version is 3, 90 - WIN
  Y at - it the new vesion of work of image Enhancement Utility?

  Image Enhancement Utility came out for the Qosmio G20 series.
  For Qosmio G30 such utility is not out!

  I guess this is the reason why you get the error message: + "this application does not work on the current version of the system BIOS +.

• Hard reset does not not with 9.3 update

  With the new update, I can't hard reset my iPhone. Siri does not work all the time. Sometimes when I reset hard my phone unlocks even if I'm not using my footprint.

  You could try these:
  

  
  

  1. Restart: press start/stop button until the Slide to Power Off slider appears, select Slide to Power Off and after it stops, press on On / Off button until the Apple logo appears.
  2. Reset: press the home and On / Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
  3. Restoration: connect your iPhone to iTunes on your computer, backup, and then select factory restore

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• Lenovo ideapad 100 s reset does not work

  New computer with windows 10 and reset function won't work...

  No idea what happened, was a disc and restarted my system. PC turns on, shows lenovo and windows does not start. Entered into reset mode, computer says unable to perform the reset, so I tried recovery and methods of restoration and always impossible to perform a reset. So im stuck with a laptop 2 days old which is useless atm. Function only allowed to perform was to turn off the computer.

  Go to bed will read the morning comments... Thank you

  Took me all day... problem solved... went to the site downloaded NDS windows microsoft 10 on a USB key from another computer and connected to this computer. Switched from the boot on USB and re installed windows mode. Works great now and I hope to God that I have never do it again.

• MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

  My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

  Hello rad trp,.

  Thank you for using communities Support from Apple!

  From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

  I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  See you soon!

• My mother has forgotten her password. Reset does not work and the e-mail for it no longer works.

  My mothers account is * address email is removed from the privacy *. She cannto remember his password. A standard to reset request does not work as the old email not available more

  Hi MorganSilver,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live and would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will support what ask you

• HP LaserJet Pro P1606dn: Fatal error Laserjet p1606dn - hard reset does not help

  I powered on my printer this morning and having to "calibrate" - type sounds for about two minutes, the Attention, ready, and go lights on (solid, no blinking). The printer prints everything I have send to it, even test pages. By following the instructions on this page, I did a hard reset by putting off the printer, unplug the power cable, leaving unplugged for about 60 seconds, then in him plugging back in and turning it back on. Same thing: makes noise for a minute or two, then three strong lights.

  The printer is on a wired LAN, and I tried printing from two different computers on the network. I tried not to do a direct USB connection yet because this seems irrelevant to the question. The network (10.10.10.x) page shows the status of the printer such as "Printer Error".

  FWIW, he showed the same error last week, but a hard reset fixed it on the first try. This time, it does not.

  EDIT: If it helps, the date of the firmware is 20120814. I tried to update to 20150114 via the update utility, but he says that he can not find a serial p1600 printer is installed.

  EDIT 2: the printer will not even turn on. Tried a few different outlets, power strip directly into the wall vs - nothing. I think he's dead. Based on my experience with HP printers, I'm not surprised.

  Hey @dselzle,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are having problems with turn your Laserjet P1606dn. I can help you with that.

  To start, you will want to make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once's done it, this document will help you with your power problems.

  If you are able to turn on the printer, then that's fine. If it doesn't always turn the printer will need to be repaired. You can contact HP by clicking on this link by clicking on the form below.

  If this resolves your problems so please let other users know by clicking on accept as Solution next to this post.

  I hope this helps and I hope you have a nice day!