Image of ios LWAPP

Similar Questions

• Generate image (for iOS app) in assets could Photoshop create the contents.json file at the same time?

  Generate image (for iOS app) in assets could Photoshop create the contents.json file at the same time?

  Hi iolnation,

  I'm sorry, but currently there is no such feature available in Photoshop.

  However you can surely place the feature request here: Photoshop community customer family

  Concerning

  Jitendra

• Does not appear internet image on ios

  HI experts,

  Developed with adf 11.1.2.4_39_64_64 mobile jdk1.6.0_51

  I have amx components of image on line table referenced on url Web site

  seems on anroid correctly but does not appear on ios platform. Deployed with xcode5.1

  I Set image source on so inputtext component value due to the validation of URLs

  so I can display image on safari with the same value

  also I tried to write the URL in the form of url (""), but nothing changes.

  What could be the reason?

  Rgds

  Can you make sure that the site that you try to get the images to figure in your whitelist?

  Implementation of features of the app as a remote URL - 11 g Release 2 (11.1.2.4.0)

  Also - the image appears if you define a remote URL function in ADF Mobile pointing to this URL?

• BUG - rotation of the default image on iOS with AIR SDK 16.0.0.250

  Hi guys!

  I just changed AIR SDK 16.0.0.250. Everything was good except a very strange problem with the default pictures on iOS devices.

  My application runs in landscape mode. In my application, I got the default images that appear during the application loading phase.

  When the application starts, first of all by default the image correctly, only for a very short time, I see default image rotates 90 degrees and adjusted to fill the screen, then disappears and the application is loading.

  Here's a video that illustrates the problem: http://youtu.be/Ry1l1v7dQss

  It's very strange, so I want to know if anyone else knows how to handle this problem and what could the source of it? Some info that might help: Application descriptor:

  <initialWindow>
      <content>SWF file name is set automatically at compile time</content>
      <visible>true</visible>
      <aspectRatio>landscape</aspectRatio>
      <autoOrients>true</autoOrients>
      <fullScreen>true</fullScreen>>
      <renderMode>direct</renderMode>
      <softKeyboardBehavior>none</softKeyboardBehavior>
  </initialWindow>

  Default image list:

  • Default.PNG
  • [email protected]
  • [email protected]
  • Default - Landscape.png
  • [email protected]

  So, to me, that looks like a bug in the AIR SDK 16.0.0.250, on AIR SDK 15. XXX everything was fine.

  I logged this as a bug, a few days ago, and today update of AIR 16 shows what he listed as a known issue. So hopefully it will get fixed.

• How to export Illustrator images for iOS 7 iPad and iPhone

  How to make an asset I have created in Illustrator and save them in resolutions appropriate for iOS (retina, non-retine, iPhones and iPads, etc.)?

  I looked at these pages, but they did not help me understand what to do in Illustrator to get the result intended:

  http://beageek.biz/how-to-create-launch-images-app-Xcode-iOS/

  http://www.idev101.com/code/User_Interface/launchImages.html

  http://www.Axialis.com/tutorials/make-iPad-icons.html

  Please don't give answers about Flash, Adobe AIR or Photoshop. These applications, including Adobe AIR are not what I need assistance.

  The question is about Adobe Illustrator.

  I'm building an application in xcode on a MacBook Pro and using Adobe Illustrator CC.

  Thank you

  W

  Should be OK to create your image in the respective pixel dimensions, and then export to 72 dpi.

• Can I use adobe stock images free IOS and Android app?

  Hi all

  I plan use couple of stock for my applications. I've read the FAQ, but I'm not sure. My app is free, and it will be free not in shopping app etc.

  Thank you very much.

  Generally, this type of use is allowed. The image is not to provide the primary value, so you should be OK. A restriction to consider would be the race of 500 000 limit. If you expect more than 500 k downloads you would need an extended license.

• Differences in the IOS images

  Can someone point me to a link where it clearly shows the differences between images of IOS? For example how IP Base differs from Advanced IP Services for example but not limited to just this comparison? The Cisco site, where you can click on this button to show the differences don't seem to work. Thank you.

  Wrong forum really but here is a good description:

  http://nettipps.de/2010/06/09/ciscos-iOS-image/

  What about Simon
  http://www.linksysinfo.org

• Where can I find the list of iOS image Default.png file name?

  I have a really hard time finding where the details are scattered on Adobe. Does anyone know the final list of the supported image filename for the publication of iOS default?

  Here is what I used before to take charge until iPhone5 in portrait orientation:

  Default.PNG

  [email protected]

  [email protected]

  Default - Portrait.png

  [email protected]

  I would like to add iPhone 6 and 6 +.

  Thank you

  Hi René,.

  To address all the concerns and difficulties encountered due to launch newly added images on iOS, we wrote an official blog. Please find here > Launch Images on iOS with Adobe AIR

  I hope this helps!

  Thank you

  Jitender

• H - HARVEST with 1142N - stand-alone or models LWAPP

  Have a remote site with several stand-alone 1142N APs. Have to replace some old AP and wishes to standardize on the 1142N. Consider using the WPS 4400 control with REAP H rather than have them hang out there alone, but want the backup in case they lose the connection to the office. Wondering if I am better or to buy the LWAPP models continue with the stand alone?

  Wait, they can be CONVERTED to work with the controller. You just 'upgrade' the IOS to an image lwapp and boom, he joined a controller. But what I've said, is that you can have the IOS AP as is, work with a controller. You need to make lwapp first, which is just another IOS image that runs on it. (if you check in the download section of cisco.com, you will see '"IOS Software' and"IOS lwapp upgrade image").

  So to answer your question in leolahoo, simply upgrade you the IOS in the 'ios to lwapp upgrade image".

  command is "archive download-sw/f/o tftp: / /"like when you put a new IOS on it. "

  Nicolas

• app iOS using AS3 don't fit the screen dimensions

  I am building an iOS application using as3 and air to package the app on my iPhone 6. My problem is that I get a black bar above and below the app, the app itself is not full screen. Step screen is set to the dimensions of 6 iPhone screen.

  I tried adding the following images of launch in the app folder. [email protected], [email protected] and [email protected]. But it is not displayed correctly.

  Does anyone have fixes for this?

  Hi messarimohamed

  iPhone 6 & iPhone6 + require different Images of launch of older phones:

  For example,.

  The iPhone 6: Default-375w-667h@2x~iphone.png

  And iPhone6 +: Default-414w-736h@3x~iphone.png

  For more details in this regard, read the article below:

  http://blogs.Adobe.com/airodynamics/2015/03/09/launch-images-on-iOS-with-Adobe-Air/

  -Tushar,

  Adobe AIR Team

• Ligthweigth autonomous mode!

  HI, I need to change the access point Ligthwiegth IOS and make it work like an Autonomus AP 1242. I have the image, but I'm not really clear on the process. I got to get into the real point of Ligthwiegth access to the console port, but I don't know how is the process of valuation...

  I'd appreciate any advice! TKS

  Hi Paul,.

  There are 2 methods to do this, take a look;

  Returning to standalone Access Point

  It is possible to return to a point of access compatible LWAPP Cisco Aironet return to autonomous mode. Please refer to Cisco Aironet Lightweight mode standalone update Access Points to get detailed instructions on the returning to stand-alone mode. Use this URL

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272

  Convert a standalone Lightweight Access Point

  You can convert an access point of the mode light return to autonomous mode by loading a Cisco IOS version that supports stand-alone mode (Cisco IOS release 12.3 (7) JA or earlier version). If the access point is associated with a controller, you can use the controller to load the version of Cisco IOS. If the access point is not associated with a controller, you can load the version of Cisco IOS using TFTP.

  --------------------------------------------------------------------------------

  Note in some deployments LWAPP, LWAPP controller lies between access points and the rest of the network. In this topology, all traffic must pass through the controller communicate with network resources, such as a TFTP server, can occur. When converting back to non - IOS LWAPP with an access point that uses the LWAPP Protocol is no longer, traffic does not reach on the controller to reach the TFTP server.

  --------------------------------------------------------------------------------

  Using a LAN Controller wireless to go back to a previous version

  Follow these steps to return mode LWAPP stand-alone mode using a wireless LAN Controller:

  --------------------------------------------------------------------------------

  Journal of step 1 in the CLI on the controller that is associated with the access point.

  Step 2, enter this command:

  config ap tftp-downgrade filename tftp-address-ip access point name

  --------------------------------------------------------------------------------

  By using a TFTP server to revert to a previous version

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  --------------------------------------------------------------------------------

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 Rename the access point image file in the folder of the TFTP server c1200-k9w7 - tar.default for a series of 1200 point, c1130-k9w7 - tar.default of access for a series of 1130 access point and c1240-k9w7 - tar.default for a series of 1240 access point.

  Step 4 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 5 disconnect the power to the access point.

  Step 6 push the MODE button and hold the button while you reconnect power to the access point.

  Step 7 hold the MODE button until the status of the LED turns red (approximately 20 to 30 seconds), then release.

  Step 8 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 9 after the access point reboots, reconfigure using the GUI or the CLI.

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272

  I hope this helps!

  Rob

  Remember messages useful rate...

• A stand-alone 1252 can be converted to AP light?

  I received incorrectly an AP 1252 (AIR-AP1252AS-E-K9 model number) and hope to convert to a light AP. But in the documentation for this device is missing in the list of devices that can be converted.

  I am also unable to find a tool to upgrade for this model.

  Is it possible to convert this device?

  Someone on the forum used the last upgrade tool and siad, he was able to convert the LWAPP 1252. You can try it, otherwise here are the steps of another Member on the conversion of these ap:

  Here is a method to perform the conversion.

  * Method 1: (Mode key) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4 rename c1250-rcvk9w8 - tar.124 - 10B .JA3 c1250-rcvk9w8 - tar.default

  5. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  6. connect the Ethernet port on the AP to your server TFTP (laptop)

  7 press and hold the mode button and power off of the AP.

  8 power back the AP while constantly maintaining the button mode for 20-30

  seconds.

  * Method 2: (Archive command) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  5. connect the Ethernet port on the AP to your server TFTP (laptop)

  6. at the point of access, type archive download-sw / overwrite/force-reload tftp: / //c1250-rcvk9w8-tar.124-10b.JA3

  ****************************************************************************************************************************************

  The other direction (lwapp to stand alone)

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  ****************************************************************************************************************************************

  If you must manually 'Prime' the LWAPP:

  Ap #lwapp AP ip address

  AP #lwapp ap ip default-gateway

  Ap #lwapp AP controller ip address

  Hostname ap AP #lwapp

  (optional)

• AIR-LAP1041N > AIR-AP1041N

  Hello

  I have a LAP1041N AIR. I understand that it is possible to turn this device into the AIR-AP1041N Cisco by downloading new software in the access point.

  Can someone help me by downloading the correct software and give a guide to do.

  Cisco want to sell a smartnet contract, but we didn't need...

  Many thanks in advance, Arend

  Hello

  Yes, we can convert the LWAPP AP to AP autonomous... Here is the link to download the picture...

  Download this image c1140-k9w7 - tar.124 - 25d.JA.tar

  http://www.Cisco.com/Cisco/software/release.html?mdfid=283445229&flowid=17961&softwareid=280805680&release=12.4.25D-ja&rellifecycle=Ed&relind=available&RelType=all

  And please follow the instructions of the below document iOS LWAPP

  https://supportforums.Cisco.com/docs/doc-14960

  Let me know if this answered your question!

  Concerning

  Surendra

• Unagle to generate keys on WS ssh-C4507R + E

  Hello world.

  I want to generate an ssh on Catalyst WS-C4507R + E key but the command «crypto key...» "does not work.

  No matter what it takes?

  Hey emmacisco,

  your ios must be cat4500e-UNIVERSALK9-M to support ssh.

  (K9 represents the crypto image)

  IOS must be upgraded before it will support ssh.

  I hope this helps...

  Here is an ad that is solving a similar problem.

  https://supportforums.Cisco.com/discussion/11918386/ssh-not-support-cat4...

• Convert 3702i standalone

  Hi all

  I'm looking for documentation on how to convert a LWAP 3702i in stand-alone mode, but not having a chance.

  All the answers have been evaluated.  Thanks in advance!

  Start with the image of IOS, ap3g2-k9w7 - tar.152 - 4.JB5.tar.   Then the release notes: OL-31714-02 (1) who says you're out of luck, unless you DO not want to see the Site of the investigation with the 3702!

  The RN also explains how to accomplish the downgrade. (Bad Oops, just do what ios)

  If it is related to the WLC, then you can cli what follows:

  config ap downgrade tftp server tftp filename name-access-point address for example:

  the investigation of config tftp-downgrade 192.168.1.10 ap ap3g2-k9w7 - tar.152 - 4.JB5.tar

  You can also find tips for Rasika to your taste for the manual method:

  http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/