IMAQ image display turn off completely in executable mode

Similar Questions

• The windows of the bar of Windows are already a form of tabs, so I need them in Firefox. How can I turn off completely from the 23 of Firefox?

  RE: TABS ARE WINDOWS!
  The windows bar already functions as a tab bar. These tabs are called "windows". So, I find windows superfluous Firefox tab. How can I turn off completely from the 23 of Firefox? I don't need to what are essentially the bars of TWO Windows covering the entire width of the image of my screen! I already have a Windows bar at the bottom of my screen, and if I really wanted to, I could change ITS position towards the top of the screen, so that it would LOOK at the windows of Firefox tabs bar. Firefox TABS are, essentially, a SECOND bar Windows superfluous.

  Here are my reasons why I prefer to use Mozilla's Firefox, Microsoft Internet Explorer or Google Chrome. I love and admire Firefox intended to Mozilla on good security for Personas Firefox Add-on and for free use of Firefox in the Add on Ad-Block, which, as you know, has the merit of separate to reduce the size of the screen - the last is my reason for wanting to get rid of "windows" Firefox SUPERFLUOUS tabs bar. I'm terribly sick companies forcing bars (most representative of marketing campaigns, trying to sell me something) in my browser (and in my throat) whenever I download something. (In case you haven't guessed, I have deliberately talking about your bar of Firefox tabs as a '' windows' tabs Firefox bar', because the TABS are WINDOWS!)

  You can also have an addon to open new tabs in a new window.

  • https://addons.Mozilla.org/en-us/Firefox/addon/tab-to-window/?src=search

• Satellite P30 seems to completely charge the battery only when the unit is turned off completely

  Hi, I have my Toshiba Satellite p30 and only works on battery. This unit operate on sector or only on the battery as after the period of time go down the warning, then closes. The orange light fades in and out, but seems that it will only fully charge when the unit is turned off completely.

  I only just received this unit so bit of a novice.

  MASH

  Hello

  normally, the battery should always charge until it is full when the power is connected.
  If you have an orange light flashes, it means that something is wrong. Maybe your battery is faulty or something else. This should be checked by a technician.

  Good bye

• HP Pavilion 15 p150nh: laptop does not turn off completely

  Hello!

  I have a laptop HP Pavilion p150nh 15. It does not turn off. If I want to close it will turn off completely. I have black screen but the vens are still on and the buttons start led is also single beds. I've tried everything. Updates, hard reset I was looking for BIOS but nothing.
  Help me please!

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• LAN connectivity turns off completely (patches after XP Reinstall :-()

  Hello

  I use a Windows XP SP3 & my os of Intel D915GVWB motherboard. I use AVG free antivirus & my windows all updates are only on the date.

  What I've been finding that after a few days, my network (LAN) turns off completely, I can not connect to the Internet. I can't see anything with the yellow question mark in device under network adapter Manager. In fact the branch of network adapter is totally absent here. So I check the hidden items, but the Intel Pro 100 n/w adapter is missing. It shows that some in the list but all irrelevant.

  Also, when I try to reinstall the driver through my CD of intel, nothing works. Infact the CD intel don't watch not the driver LAN on menu autorun. It shows just the audio, the graphics accelerator and the chipset. No LAN driver doesn't show at all!

  I tried would continue the XP using my original CD but its does not work. Finally, I have to reinstall my XP again. It takes a lot of time & I'm losing all my data on the C drive.

  Can anyone suggest me what can be the issue. Why this network drivers go off & why.

  Concerning

  MILIN

  Have you tried running "sfc/scannow"?

  To use the tool Checker (SFC) system files (described in:http://support.microsoft.com/kb/310747 ):

  You must have your Windows XP installation CD and the CD of Service Pack 3.

  If you do not have the SP3 CD, or order it (U.S. / Canada , Europe, Africa , Asia or South America ) from Microsoft or download the ISO (here ) and burn it.  You will need the installation CD and the SP3 CD.  Type:

  sfc/scannow

  It will ask for the installation CD, insert it and take a break.  After a while he also want the Service Pack 3 CD.  Occasionally, SFC may want to replace things; Let him.

  SFC can also, say that you have bad CD SP3.  I don't have a definitive answer to this problem.  You may be able to overcome by removing SP3 that you installed and re-setup from the SP3 CD then run SFC again.  (I think that it is because there are different language versions of service packs (include Multilingual).) ( Be sure to select the language appropriate for your ISO ).

  Vote if this is useful.  Click on brand or propose as answer if that answers your question.  It will help others find the answer in the future.

• Help: Fuze distorts the sound when the display turns off

  Hello

  Since a few days, I own my rocket. Today, I recognized the following problem:

  When the display turns off the "rocket" distorts the song. It's a bit like stuttering, it's his bad.

  When I keep the screen turned on (by clicking on the boxes or more) he playes the song of good quality.

  The EQ is set to standard.

  Has anyone experienced the same problem?

  I don't know what to do, what an individual problem of my camera (default?) or maybe a general problem? I would stay there or should I change it?

  Thanks in advance,

  Stefan

  This problem is fixed in the next firmware should be out in the next few days.

  TO work around it, just put the equalizer settings on the equalizer custom for anything other than 0,0,0,0,0

• E4200 can wireless be turned off completely?

  On the E4200 can the wireless turn off completely? I use isn't more than all wireless devices and thought that if I can disable or turn off all wireless capabilities, it may be more secure and run cooler.  Short as... What settings can I use preclude any device wireless access?

  Select network mode "off" for the two bands.

• Display turns off

  Hello

  If I use the battery and I don't do anything on the keyboard or the mouse - after a short time (15 seconds), the screen turns off.

  How will I know the display turns off not when I use the battery.

  Best regards Thomas

  Right-click on your desktop, select property, then tab selection screen saver, select power, now put you your screen turn off time forever or any time you wish to in battery mode.

• Some photos are not selected when I try to import ("do not import possible double images" is turned OFF!)

  Some photos are not selected when I try to import. I used Lightroom 5 since it launched and do not have this problem until a month ago (select: "do not import possible double images" is turned OFF!). I really have to control my import in the opposite case, it miss a few images, but don't know what to do when the picture is not selected. How can I import the correctly without making stuff and that's why spoil my archive carefully planned? My archive is too packed and I have double numbers ore something? What I need Lightroom 6?

  Thank you very much for your help!

  Best regards, Enith

  "Photos are indeed grey, but the imported photos are new assignments, so this:" ","then it means that you have previously imported photos in Lightroom, and so it is not necessary to import them again ', is not the case.

  While you are probably right, if the photos were just captured, the problem is that Lightroom think that these are the same pictures that were previously imported, and so until you can determine why Lightroom think that you won't progress.

  You need search for any of these photos in your Lightroom Catalog. Follow these 4 steps in order

  1. In the catalog Panel on the left side of the library Module, click all photographs
  2. Develop all batteries (picture-> stacking-> develop all batteries)
  3. Disable all filters (once or twice Ctrl-L)
  4. Search for one of these photos by file name

• Unable to receive calls from Apple Watch, using WIFI AT & T calls, when the iPhone is turned on, turned off or in Airplane Mode.

  I work on this issue and wanted to involve the community.

  I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

  I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

  Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

  I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

  http://help.Apple.com/watch/#/apd0443fb403

  If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

  • Send and receive digital messages Touch
  • Send and receive messages using Messages
  • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
  • Check current weather conditions
  • Track your inventory

  http://help.Apple.com/watch/#/apd2fe746e86

  Make calls via Wi - Fi

  If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

  To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

  Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

  Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

  Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

  Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

  AspiringAppleGuru wrote:

  I have... to connect to the 5 GHz on my... router bandwidth.

  Hello

  These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

  If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  Use Apple Watch without her sister iPhone - Apple Support

• Inspiron 15r will be turned off completely

  Hi all

  over the past two months, my laptop has not been able to completely stop.

  What's happening: I click on closing down, it disconnects and the screen goes black.

  It seems stop but the light power button, and the front power led remains lit.

  The only time where it will turn off successfully is when I restart the laptop.

  I hope someone has an answer to that. Thank you!

  P.S (there is a period where I took the battery and used as an office. maybe that has something to contribute)

  I had some of the same problem. I am working on a friends N5010 (1545) laptop and no matter what I did the laptop would not be stopped and the CPU constantly fan would go right from the beginning to the top. I click the button 'Start' and close as usual. However the laptop continues to operate even if the hard drive light was off. Only the power led remained. I even installed different versions of the operating system in the hope that the backup image of the disks I was using was corrupt and cause a problem. I searched other forums and have found an answer to a similar survey that says to remove the CMOS battery and reinstall it. I have disassembled the laptop, removed the battery (which I might add was down, I had to remove the motherboard and flip it over) and then reinsert the battery. Since I got everything disassembled, I changed the battery, just in case where instead of just re - install. After reassembly and re - install the original from backup, disk image works well. This worked for me and can work for you, if you do not already solved your problem.

• How can I turn off completely "Remember passwords"?

  Every timei access any web site, FireFox request if I want that it to remember the password.
  I don't want to remember a password for me. I don't want even to ask - it's just a nuicance.

  I have a lot of instructions seem to invalidate all remember passwords - but this isn't what I want. I want to turn it off completely.

  Hi, go to the menu > options > Security Panel - you can disable the memory of passwords here.

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Tecra A4 model PTA42E light display turns off

  I have a Tecra A4 - 01400YPT PTA42E model after the laptop, after 4 or 5 minutes the screen light goes out, and I do FN + F6 or F7 (more or less light) to turn it back on. This, it is 4 or 5 times, and after that, it will work ok.
  One had this problem? I tried updates the bios, but there most recent person! One thing that is strange is that this laptop doesn't have this little button above the screen to turn off the screen when we close of laptop display, because it seems that when we push this little button, and the light goes off!

  Hi Rene

  If you want to use the options of power management you need to install the Toshiba power management utility. Do you have this tool on your device or have you used the Windows XP power management?
  To switch between the modes of use different ca you use the FN + F2 key combination.

  Best regards

• Satellite L350 - display turns off during startup

  My screen laptop L350 itself turns off during startup after posting normally for about 2 seconds. It is possible to get the display back to normal if you go to sleep and then wake, but the new screen only stays on for about 2 seconds. This makes it almost impossible running the diagnostics.

  Does anyone have an idea what might happen?

  Hello

  Have you tried an external monitor?

  Perhaps the internal display is affected and needs to be replaced