imdpd/Expdp problem on the same windows server

Similar Questions

• VMS coexisting with ACS on the same windows server

  Try to install the VMS software and ACS on the same machine; Windows 2000 used platform.

  According to my experience, it is a bad idea. VMS itself is a resource hog, and I usually tell my customers that several CPUs and at least 4 GB of RAM is required to a minimum. When you add GBA to this mix then you just ask in trouble. Keep them on separate boxes and your troubleshooting of a service that will be much easier.

  Just my 2 cents.

• copy data from one comprehensive database to another in the same windows server

  Hi all

  We intend to migrate or copy the complete data of a database which is in 11.2.0.1.0 enterprise edition for 11.2.0.1.0 in the standard edition.

  Two oracle homes are even windows Server.

  According to my knowledge, we can do this:

  1. create a database in 11.2.0.1.0 in standard edition and migrate by datapump

  2 tablespaces transportable datapump option.

  3 Rman cloning.

  Is it possible to lower the db in 11.2.0.1.0 enterprise edition in a uniform State... copy the file pfile, backup of the controlfile, data files and paste in 11.2.0.1.0 in the standard edition home... After you re-create the control file and db startup?

  You cannot clone a database of EE in a self a.

  The only option you have is option 1.

  Refer to support note 465189.1 if you want more details

• I can't install vmware server on the same windows server 2008 with Hyper-V?

  I have a server as the active service of Hyper-V, but I want to virtualize a VMware ESXi, andnot with Hyper-V now like to install VMware Server.

  My doubt is: can install two virtualizadores on the same server?

  It is a virtualization server that I have in my environment.

  Thank you

  Diego Paiva.

  I don't know of anyway to run ESXi in hyper - you can do the reverse to install ESXi and then run Hyper-V as a virtual machine.

  As for your second question - if you ask you can install ESXi on top of Hyper-v - you can, but it will overwrite the Hyper-v Forum

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• V29 Firefox to open links in the same window

  Since the installation of version 29, I found only two apparently related questions:

  (1) I find that links open in the same window as the source, instead of a new window.

  For example, I get a notification of a newsletter every day in my Yahoo email account. Before v29, when I clicked on the link in the email to go to the newsletter, it would open in a NEW window (my preference).

  With version 29, it opens in the SAME window (and replaces the window where I had Yahoo mail open).

  (2) in the same way, I do a lot of work where the links will appear in an Excel worksheet. Previously, whenever I clicked on one, it will open a new window. If I clicked on 6, I have 6 windows open. Now, every link I click REPLACES the last one that I opened.

  These two problems are very annoying and slow me down.

  Is there a setting where I can change this behavior?

  I found that after Firefox v29, a LOT of my settings and
  
  Add - ons have been changed / reset. Try this;
  Launch Firefox in Mode safe
  
  While you are in safe mode;
  
  Firefox Options > advanced > General.
  
  Find and stop using hardware acceleration.
  
  Then check ALL your settings. Browser and Add-ons. Then restart.

• Problem with the finder windows... Why what is happening

  It started today. I don't know how to solve this problem... it seems that the overtime, I opened a window of the scrollbar are right in the Middle, I can bring it back to the right but then when I re - open the same window, it goes back to this. Is this a problem?

  No, this isn't a problem, it's a preview for a Finder window pane:

  If you don't want to see it: Finder > Menu bar > View > preview hide, or use: shift - command - P

  

  NB. You can enable or disable the preview pane, to display the preview: Finder > Menu bar > display > show preview, or use: shift - command - P

• Open a folder in the same window

  Using Vista

  I had an about eighteen files Windows Update a couple of days.

  Since then, whenever I open a folder to load, it opens in a new window. I want to open it in the same window.

  Tools > Folder Options > Browse records has NO effect.

  Find the update cause your problem:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• How do you do windows open each new folder in the same window?

  in Control Panel-folder options, open each folder in the same window is selected, but whenever a file is opened, it opens in a new window, what's wrong?

  Windows 7 pro, clean install, toshiba portege m700

  I had this problem, but after installing IE8 on Windows Vista.  I was unable to make Windows Explorer open folders in the same window, even if this option in 'Options folders'.

  The response marked here seems to have given back me the feature, but unfortunately it seems that I can not open files in their own windows separated (when this option is selected). Well.
  http://social.technet.Microsoft.com/forums/en/itprovistadesktopui/thread/a3ce4023-b3b1-49ad-A4F6-08587fc8b736

  ---
  Here is the solution:

  Run cmd as administrator and run the command "regsvr32 actxprxy.dll".

  See you soon
  ---

• My option "open in a new tab in the same window" has stopped working.

  After working for centuries without any problem, my option "open in a new tab in the same window" has stopped working.  Support suggested that I go to tools, select internet options and open tabs, and then select open in a new tab in the same window option.  I did as instructed and concluded that this option under the tabs was already selected and unchanged.  I changed this option, closed my browser and restarted my computer as instructed.

  As before you follow these instructions, and when viewing online and wish to open a link in a new tab in the same window I once again this desired option.   Internet does not take into account my instructions and opens my link in a new window.  This is extremely irritating.

  Does anyone have a solution?

  Hello

  What version of Internet Explorer work?

  You can try the following steps and check:

  Method 1:

  You can reset Internet Explorer 9 settings and check

  http://Windows.Microsoft.com/en-in/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Important note: ignore in place update from the above mentioned link.

• Can I use the same NTP server configured in the firewall to guard

  I configured the NTP server in my VCSC Expressway it synchronized correctly, but I'm unable to configured in my VCSC Gatekeeper with the same NTP server address that is configured in VCScExpresway.

  Please suggest

  Hello!

  You use in.pool.ntp.org. This isn't a single ntp server, there is a pool of servers,

  then you might see different ntp servers, and they can also change and sometimes

  It can also happen that yo will get a limit down.

  If I get him here, I have for exmple get:

  $host in.pool.ntp.org
  in.pool.ntp.org has address 113.30.137.34
  in.pool.ntp.org has address 119.226.101.131
  

  and a little later, I got:

  $ host in.pool.ntp.org
  in.pool.ntp.org has address 123.108.225.6
  in.pool.ntp.org has address 125.62.193.121
  

  In any case you want to configure multiple NTP server addresses.

  So, if you want to use this area (India):

  * You must configure these three host names as described here: http://www.pool.ntp.org/zone/in

  * See who works for DNS resolution (which may also be the problem here)

  * you have a suitable internet access

  * see that the firewall is open to 123 to any host on the internet

  * If you are not in India use a different area

  On the VCS under Maintanance > tools > utilities you could for example check if you can resolve DNS and traceroute/ping external hosts on network.

  The other option is to find at least 2 NTP servers you know and that you can use and set up.

  then you could lock the specific IPS in the firewall, otherwise it should be open to all.

  Its also not hard to set up your own server NTP, incidentally.

• Report dimensional hierarchy opens in a new window rather than the same window of dashboard in obiee

  Hi Experts,

  I created a hierarchy of dimension in obiee and created a report in analytics.

  I placed this report in a dashboard. But when I click on the hierarchy column it expands the hierarchy as expected but in a separate window rather than in the same window.

  Could someone help me on this problem?

  Thank you

  Patricia.

  If you are using a standard drill on the column hierarchy (without action) follow this path:

  • Open the page of dashboard for editing.
  • Find the section where your report.
  • Check the section "Drill in Place.

  

• GoldenGate replication on the same physical server - REPLICATE always ABENDING

  Dear expert GG,

  I'm completely green with Golden Gate, so I would like to help on why my REPLICAT process abends right after that I put my source database object lines.  I'm following the writeup of Gavin Soorma -.

  http://gavinsoorma.com/2011/08/GoldenGate-replication-with-source-and-target-on-the-same-physical-host/

  I'm trying to implement CDC on the same physical server.  I have a 11g source database that uses ASM and my target is the database 10g that is using traditional file system management.  I am trying to map an object, ggs_owner.myobjects that I created in the two databases.  EXTRACT both REPLICAT start very well, but as soon as I perform an insert in the 11g database and post the lines, my REPLICAT process abends.

  Version information:

  Oracle GoldenGate for Oracle shell
  OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO version 11.2.1.0.1
  Linux, x 86, 32-bit (optimized), Oracle 11 g on April 23, 2012 08:09:25

  Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.

  GGSCI (localhost) 3 > DBLOGIN Userid ggs_owner@ora11g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 4 > RELEASES
  Operating system:
  Linux
  Version #1 SMP kills Jan 4 15:24:05 EDT 2011 version 2.6.18 - 238.el5
  Node: localhost.localdomain
  Machine: i686

  Database:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE 11.2.0.1.0 Production
  AMT for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  GGSCI (localhost) 7 > DBLOGIN Userid ggs_owner@ora10g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 8 > VERSIONS
  Operating system:
  Linux
  Version #1 SMP kills Jan 4 15:24:05 EDT 2011 version 2.6.18 - 238.el5
  Node: localhost.localdomain
  Machine: i686

  Database:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production

  PRM file content

  EXTRACT the content of the Param file

  extract extlocal
  SetEnv (ORACLE_HOME="/u01/app/oracle/product/11.2.0/dbhome_1')
  SetEnv (ORACLE_SID = 'ora11g')
  ggs_owner username, password ggs_owner
  localhost.localdomain, mgrport 7809 rmthost
  rmttrail ./dirdat/aa
  TRANLOGOPTIONS ASMUSER sys@+ASM, oracle ASMPASSWORD
  table ggs_owner.myobjects.

  Content of the file param REPLICAT

  REPLICAT replocal
  SETENV (ORACLE_HOME="/opt/oracle/product/10.2.0.1')
  SETENV (ORACLE_SID = "ora10g")
  ASSUMETARGETDEFS
  Ggs_owner username, PASSWORD ggs_owner
  DISCARDFILE. / dirrpt/discard.txt, APPEND, 20 MEGABYTES
  CARD ggs_owner.myobjects, ggs_owner.myobjects, KEYCOLS (object_id) TARGET;

  Complete the following steps in GGSCI:

  GGSCI (localhost) 103 > add extract extlocal tranlog start now
  Added EXTRACT.

  
  GGSCI (localhost) 104 > add rmttrail ./dirdat/aa gets extlocal
  Added RMTTRAIL.

  
  GGSCI (localhost) 105 > dblogin Userid ggs_owner@ora10g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 106 > add replicat replocal exttrail ./dirdat/aa
  ERROR: No control points table specified to add REPLICAT.

  
  GGSCI (localhost) 107 > add replicat exttrail ./dirdat/aa NODBCHECKPOINT replocal
  REPLICAT added.

  
  GGSCI (localhost) 108 > dblogin Userid ggs_owner@ora11g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 109 > start extract extlocal

  Sending START request manager of...
  EXTLOCAL EXTRACT from

  
  GGSCI (localhost) 110 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING
  EXCERPT FROM RUNNING EXTLOCAL 00:00:00 00:00:02
  REPLICAT ORDER REPLOCAL 00:00:00 00:01:27

  
  GGSCI (localhost) 111 > start replicat replocal

  Sending START request manager of...
  REPLICAT REPLOCAL from

  
  GGSCI (localhost) 112 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING
  EXCERPT FROM RUNNING EXTLOCAL 00:00:00 00:00:09
  REPLICAT RUNNING REPLOCAL 00:00:00 00:00:04

  In another window, I do the following:

  SQL > connect ggs_owner@ora11g
  Enter the password:
  Connected.
  SQL > select count (*) from myobjects;

  COUNT (*)
  ----------
  71932

  SQL > truncate table myobjects;

  Table truncated.

  SQL > insert into select MYOBJECTS * from DBA_OBJECTS;

  71932 lines were created.

  SQL > commit;

  Validation complete.

  When I return to GGSCI, I see that the process has added:

  GGSCI (localhost) 132 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING

  EXCERPT FROM RUNNING EXTLOCAL 00:00:00 00:00:07

  REPLICAT REPLOCAL ABENDED 00:00:00 00:00:02

  When I can look at, or what can I add to the param REPLICAT file that might help identify the root cause.

  Any help would be appreciated.

  Thank you

  Prom

  Hello

  Since no one has replied, I can go with my assumptions that replicat process searches across data dictionary, and since he is a 11g Golden Gate executable, its not backward compatible with 10g.  To this end, I have duplicated my database with RMAN DUPLICATE ora11g, creating another database called ora11g2, changed my REPLOCAL. PRM file as follows (changes in bold):

  REPLICAT replocal
  SETENV (ORACLE_HOME = "/u01/app/oracle/product/11.2.0/dbhome_1")
  SETENV (ORACLE_SID = "ora11g2")
  ASSUMETARGETDEFS
  Ggs_owner @ora11g2, ggs_owner PASSWORD username
  DISCARDFILE. / dirrpt/discard.txt, APPEND, 20 MEGABYTES
  DDL INCLUDE ALL
  CARD ggs_owner.golden, TARGET ggs_owner.golden, KEYCOLS (gold);

  I then rebooted the components again, and finally, I was able to replicate the changes to the GGS_OWNER table. GOLD ora11g, at the same table in ora11g2.

  Thank you all.

  Prom

• Can forms 6i, 10g and 11g coexist in the same windows box?

  Hi all.
  
  Is there besides using different ORACLE_HOMEs, any consideration to take into account to install 11 g and to coexist with 6i and 10 g?
  
  I just do a 11g installation, and in addition to having failed, he also do my 6i installation unusable.
  
  Your comments will be greatly appreciated.
  
  Best regards, Luis...!

  Yes, all three can co-exist on the same Windows box. I currently have Oracle Froms 6i and 10g R2 or 11g R2 installed on the same workstation. The builders of form work well, however if you plan to run a form from the forms Builder, you will have conflicts between the (Forms 10 g) OC4J and WebLogic (form 11 g) server. I was able to work around these conflicts by changing the system path and make sure that the inputs of 10g of forms appear before 11g entries when I need to run a form from the Forms Builder 10 g. Conversely, to ensure that 11g entries appear before 10g entries during execution of a form of the 11 g Forms Builder.

  I saw a thread where someone said that they were able to work without having to modify the system path, but I was unable to find this thread again to test their solution. You can search this thread if you do not want to change the system path every time.

  Forms 6i come into conflict because it uses the forms instead of an application server Runtime to run a form from the forms constructor.

  I hope this helps.
  Craig...

  Published by: Silvere on 7 February 2013 13:12

• Redirect to the new URL in the same window?

  Hi all - I have a SWF embedded in an HTML file. After the film has finished playing, I want a new URL to load. I currently have the following code in the final keyframe of my layer actions:

  navigateToURL (new URLRequest (http://www.someurl.com));

  .. which works, but the problem is that it opens a new window for the new URL instead of redirect in the same window, which is what I prefer. Y at - it a different command that I can use to force the new link to open it in the same window?

  I guess I could use a Javascript redirect to breast HTML of the web page, but it seems safer for me to use Actionscript within the Flash animation. Anyway - thank you very much in advance for any help.

  It is roughly the same as what you would do with html...

  navigateToURL (new URLRequest ("http://www.someurl.com"), '_self');