SD Bluetooth card 2 and Vista

Similar Questions

• Help with the new card mother and Vista problem?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  Hey icuhavoc

  are recovery disks to reinstall vista with the original hardware installed if I understand you correctly know what records you need to know a set of manufacturer's recovery disks

  If it is pre-installed this is an oem license and does not change unless you did it in consultation with the manufacturer of models of motherboards and processors

  Walter, the time zone traveller

• two cards nic and vista always shooses one with no cable

  I'm going NUTS. Windows Vista ultimate 64 works fine on this machine. However, I have two nic cards and every time I restart vista chooses to try to connect to the internet with one that is disconnected. I tried to disable an and happening always. UNDER XP, I never had this problem. I nominated which card to use. I am a technician A + and I am ready to throw this thing out the window. I thought actaully get 7 for my partner's computer, but maybe it's a bad idea too.

  Disabled the device through network or the Device Manager? Also is the integrated network interface card? If yes you can disable it in the bios.

• BlackBerry Smartphones Bluetooth 9530 drivers and Vista Ultimate?

  When I try to associate my Storm with my win Vista machine, I get an error message asking the Bluetooth driver for the phone.

  I tried the installation disk supplied with the phone, but it was not found there.  I have not found on site RIM ether

  Any suggestions out there?

  Dunc

  Hey, Dunc, I get this error message too, but simply chose to ignore it and choose not to let Vista try to install the driver.  Once I closed all the messages, I have no problem connecting via Bluetooth.  Note that you can not install applications and the phone via Bluetooth, but you can synchronize and backup and restore via Bluetooth.  I would not recommend transfer large files via Bluetooth because it's slow.

  Let me know if this does not work for some reason any.

• Bluetooth stereo headset and Skype - have to switch manually to sound card

  Hello

  I use the Bluetooth stereo headset and Toshiba bluetooth stack for Toshiba bluetooth adapter No.

  I need to connect the headphones so that he was an audio device by default when it is connected. I plugged the headphones using link HOWTO: [this | http://aps2.toshiba-tro.de/kb0/HTD9602MS0000R01.htm] page.

  The problem is that while the headset is disconnected, soundcard, assosiated to Headset profile remains peripheral by default for Skype (it does not disappear from the Device Manager) and I need to change back to the usual card manually.

  The second problem is that automatically when the headset is turned on, it connects to the PC using the profile not headphone A2DP. and to connect to AD2P, I must again manually.

  I'd be happy to help all problems, thank you.

  Have you ever found a solution?

  Unfortunately I don't have a solution for you, but I m interesting how to solve this problem

• Card 3G and Bluetooth stack question - tecra M4

  I'm having a problem getting a 3G vodafone card to work with a Toshiba Tecra M4.

  The problem is that the card won't install properly on this laptop (with exclamation point appears in the Device Manager and additional ports appear under "ports", but none regarding 3G card - it should be two features of card 3G appearing in the section "ports" in the Device Manager - at least there on the Portege) card works fine on a Toshiba Portege.

  The advice I received from the supplier was to disable the bluetooth card in the Device Manager, and then uninstall the Toshiba Bluetooth stack, then delete Vodafone software, reboot, and reinstall the Vodafone software. Finally to reinstall the bluetooth stack.

  I followed these instructions and everything seemed ok (this appararurent device to be picked up correctly in Device Manager) until I reinstalled the battery bluetooth how I was in the box start.

  Is this a known issue with Toshiba Tecras and you know any solution?

  Hello

  As far as I know that there is a new update for Toshiba Bluetooth Stack version 4.00.23
  I recommend you to test. Perhaps the new version solves the problem.

  In addition, you can visit this Web of Toshiba Bluetooth site:
  http://APS.toshiba-tro.de/Bluetooth/

  You will find a contact form to get in touch with Toshiba Bluetooth support.
  There you can descript comments.

  Good bye

• Vista on Qosmio F20: SD card reader and Media Player keys do not work

  I recently updated my Qosmio F20 for Vista.
  I got most of the job functions, but my SD card reader and fixed keys for media player still haven't.

  I can't find the drivers for them (I don't think they exist for a F20) so I was wondering if anyone had a solution.

  Thank you

  Hi faarn

  You can't find the Vista drivers as Vista don t drivers is on the page of Toshiba. Some people have posted a link to the official document on the units of Vista support and the Qosmio G and F20 was not on the list.

  But another clue. Check the drivers in another series as F30 or G30. But the chances are small that the pilots will run

• HP dv6-1355dx: Wifi and bluetooth card updated hp dv6-1355dx

  I want to improve my wireless Bluetooth card what you need. This one will work Intel Centrino Wireless-N + WiMAX 6150 (633817-001) >

  Based on the HP Pavilion dv6 Entertainment PC - Maintenance and Service of Guide for your computer, the following WiFi cards are among the options of origin in dv6 product range;

  Atheros 9285 G 802. 11b / g (more than Bluetooth, with antennas) #518436-001
  Atheros 9280AGN 802.11a/b/g/n (over Bluetooth) #518437-001
  Broadcom BCM4312 802. 11 b / module WLAN g (over Bluetooth with two antennas) #504593-003
  Module WLAN 802.11a/b/g/draft-n, Broadcom 4322 AGN (and Bluetooth) #518434-001

  While you can try the Intel Centrino Wireless-N + WiMAX 6150 (633817-001) wireless card, there is no guarantee that it will work. It is vary possible that only cards contained the MSG from HP above will work on your computer. This is known as the 'white list', and if the card is not on the white list, the computer stops with a message prompting you to remove the card and use a card authorized.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Vista will have to reinstall if the upgrade card motherboard and CPU?

  So I'm wanting to upgrade my computer and I can't find a clear answer, if when I install a new one, a motherboard and CPU, but with the same RAM and the hard drive and the motherboard did not fail, I need a new installation of windows?

  So I'm wanting to upgrade my computer and I can't find a clear answer, if when I install a new one, a motherboard and CPU, but with the same RAM and the hard drive and the motherboard did not fail, I need a new installation of windows?

  Hé Fatah

  If vista came preinatalled your computer, it is rated an oem license as such is related to the material that it is initially installed on

  If you have a retail license, you can upgrade your card motherboard and CPU

  you will probably have to reinstall vista while the hard drive with the existing vista installation contains the drivers for the old motherboard and probably do not start correctly

  Walter, the time zone traveller

• Vista can not read memory cards, please and get in shape.

  Hi, I have a strange problem that appeared on my laptop Sony VIAO.

  Now it will not read any memory card I use. USB flash drives, SD or MagicGate cards in the slots of the laptop, or the internal or external to a PSP memory.

  In all cases, it recognizes the drive exists, but when I try to open it I get an error "you must format the drive until you can use it."

  An exception is the CF card in my camera, which is very well read (through the camera and USB). Maybe it's because the camera is regarded as a Portable device in Vista, rather than a "device with removable storage".

  I checked all cards work fine in the other PC, and they all used to work on this laptop (i.e. it is not a problem of size of memory card). I have not found anything relevant on the net, and Vista claims that drivers are working and up to date.

  Thanks in advance for any help.

  Hi Foucalt31,

  Have you read the following article?

  http://support.Microsoft.com/kb/941996

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• Portege M400 - Toshiba Flash Cards crashes on Vista

  Toshiba Flash Cards crashes on Vista when windows is configured to use the standard color scheme "windows" under appearance settings, (for your information, I prefer to use this mode, vista runs faster, uses less energy and less ram system in this mode).

  However, he does not plant immediately, on the contrary, it seems to crash whenever I flip the screen (which happens quite often that I m using a tablet pc) with the version previous software it crashed at startup but which seems to have been fixed with this version, although not completely, but when it blocks it completely will not close even if I force the Task Manager to end the process (rather than just the) Task).

  (Portege M400 - vista family flash cards V.2.00.02 premium - tosh)

  Thank you very much - Garthark

  Hello

  It is very interesting topic. Have you noticed the same thing using the Vista standard color palette?

• Pomp A100-773 and WIN 7: card reader and access keys Fn does not

  Hello
  I hope that this question did not arise 100 times before. (I have not found an answer in this forum)

  Problem:
  Card reader and FN keys do not work, where can I get drivers?

  I installed Win 7 Pro on my laptop Satellite A100-773. Everything works great and Win 7 has all the drivers installed, but the card reader and FN keys do not work.
  On the support home page is not oder pilot anything for this laptop with Win 7.

  Can someone help me with this?

  Tahnks.

  PS: it was not the version upgrade of the United Nations.

  Hi all,

  by now, I tried the extra package toshiba for model serveral for win 7 and vista, but before the installation there is an error.
  the card reader is now working with the card reader for win vista driver.

  Doesn't anyone know how to solve this problem?

• Portege R100 with SD 2 - Bluetooth card has ceased to be able to see devices

  Hi, I have a R100 with a card SD Bluetooth 2. I used it for a Microsoft IntelliMouse for almost 3 years. Bluetooth stopped working a few days back when I uninstalled some software VPN network. He noted his work, but is unable to see any Bluetooth device when scanning. I know that the mouse still works as I can see when you scan my PDA Bluetooth devices.
  I uninstalled and reinstalled the battery (new and old worm) and SD host controller.
  All appropriate devices are displayed in Device Manager when the SD card is connected.

  Help please, I'm getting RSI by using the touchpad!

  I have a R100 and I lost my card SD2 and the computing technology gave me a SD3 to replace. I found the more stable SD3 version that I had some of the same frustrations as you in the past. Looks like you have made the logical things, but give an uninstall complete / reinstall another go. That's what I did several times. Also, rub your device manager to make sure that all BT devices have disappeared (it can be useful display all those hidden and uninstall one by one). Finally, make sure that the BT Manager load when you restart, or unless you can load it manually. Sometimes, just to be patient with the discovery of the device, there are moments where it could not find a device and then I would try it a few hours later and he was there. If all else fails, try a SD3 card and battery 4.20 because this combination cured all the problems.

• LaserJet 4 L and Vista do not play well together

  I have my LaserJet 4 L hooked up to a Vista desktop via a parallel to USB adapter, using a USB port.  It works very well for a while.  Then, it will not work.  When it fails, the printer info box shows the file in mode 'impression', but it never reaches the printer. And when I try to cancel printing, it can take five minutes to remove.  If I remove and reinstall the printer, it works for awhile - and then the same thing happens. Sometimes rebooting makes the printer works for a while, but not always.  I use Vista 4 L driver. (HP is not posting a 4L Vista driver on their site - they just will tell you to use the one in Vista.) I manually installed the printer and also leave Vista recognize and install it. I get the same results (bad) anyway.

  I begin to suspect the parallel to USB adapter.  (Believe it or not, its documentation is partly in Chinese, and I bought in the USA).  At this point, I could buy another - or I guess I could buy a card for my computer's parallel port.

  (I know this is an old printer, but it worked flawlessly for 15 years, and I don't like junk food it.)

  Any suggestions to solve this?

  Thank you

  Alan

  I don't got no answer on that.  But I managed to solve this problem.  So, just in case, someone else has this problem:

  It was indeed my parallel to USB adapter.  I bought a new parallel cable USB (a cables unlimited, Micro Center brand). The package called for it is Vista compatible and that it supported a long list of old printers HP, Canon, Epson, Lexmark, Panasonic.  It works perfectly. First of all, I just connected the cable to the computer. Vista recognized and loaded a driver.  Then I plugged the other end into the printer and Vista has recognized the printer and loaded the driver for this.

  Be aware that most of the parallel to USB adapters don't pretend to be Vista compatible - and probably are not.

  Alan