iMovie on her very sweet voice

Similar Questions

• Why voice over 5s not like 6s on headphones on 6s is very low voice?

  I have problem with my iphone 6s headphone voice is very low when I listen to music or something, but the voice on my 5s is very high

  Hi Abdan,

  Welcome to Apple Support communities.

  From what I understand, the sound on your iPhone 6s is low or muffled compared to your iPhone 5 s. try to take a look at the article below the link which describes a similar problem and provides many excellent troubleshooting advice.

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

  See you soon.

• call very low voice on the other side (Z5 MM Compact)

  Hello guys,.

  I have a question which appeared suddenly and wont go away.

  My voice is very low, on the other side, people say it's like I want to talk away from the microphone.

  There is no problem with voice recording or when using headphones. I already rebooted the phone but question keeps beeing there.

  It's as if the z5 lowers my voice through the microphone during a call, maybe it's the malfunkctioning of noise cancellation?

  So I had no time for the repair of software, but after upgrading to the new fw X.224 each mentioned last issue is resolved

• What part of a PC is responsible for showing her very small details in the design?

  I am currently using photoshop in learning graphic and web design.

  I use a PC with a low graphics (about 512 MB) memory and a samsung syncmaster 226BW 22inches.

  I noticed that, while following a graphic design tutorial, but eventually, I'll add a layer style that does not appear on my screen or even on my laptop screen and find themselves without effect on the overall design.

  This happens often. For example, I could design an icon and then carry on the verification and uncheck an INTERNAL GLOW (or another layer model), I see no difference in the design. I realize that's not good for me as a designer of learning.

  Now, I am planning to change my monitor or my PC.

  I would be happy to know what needs to be changed. Is it my PC, my monitor or BOTH (judging by my pc and monitor specs).

  I'd be happy to get guidance on this issue.

  Thank you very much!

  These issues have little or nothing to do with the ram. You must find a way to calibrate your monitor, so the colors are more specific to the data in your documents.  Realize that monitors also have a life and generally degrade some with age. If your screen is old, even a large calibration could not help a lot.

• BlackBerry Z30 outgoing voice call - very low

  My STA100-2 BBZ30 I have used since Nov 2014. Recently, 2 months I noticed that all of my callers are complaining in a very low voice while I could hear their voices very loud & clear but my voice coming out too slow. I verify that test all its pass please tell me how can I solve this problem...

  1. is there any problem with the microphone in Z30?
  2 inbound voice is very strong but why leaving is so low? Technical problems?
  3. the question whether this problem is specific to me only?

  Thank you

  Have you installed yet, on your PC "Desktop Software" LINK/Blend? This is necessary in order to install the necessary drivers on your computer so that your PC and BB can connect via USB... a sine qua non. You don't have to actually run LINK or MIXTURE, just install it on your PC and then connect your BB... and then launch the automatic charger.

• Sound of voice, recording in Captiv is always different

  Hi people.

  I have a samson C01U microphone, with a value of $ 200, so im assuming its ok. He said condenser on it, hope that helps a little lol...

  in any case, I have just recorded some session and every little movement in my mouth at an angle on the microphone, the height, proximity, makes a HUGE difference in the speech output.  Sometimes I can here my breathing, other times im very sweet.

  As it is impossible to stay perfectly still while recording when im doing a simulation and move, im wondering how I do about it?

  What is the best thing for recording, a microphone ona stand? that is my current setup...

  Here you can see what im talk... forgive me, its my first good living, although I did some practice those, it was for the iw ork ppl for so its official so to speak lol... http://www.blcstudents.com.au/tutorials/valid.htm

  I'm in a classroom, I have nothing in front of me and I have no other noise coming in, very quiet sound when I record. I have two computer monitors in front of me is everything and my laptop im saving it to.

  Its a laptop nice new Toshiba with good i5 core and 1 GB graphics card, also decent little machine for what im doing...

  Any thoughts would be great.

  MY concerns are:

  I use the bad microphone?

  Can I use a headset instead?

  How do the guys on linda.com this sound reproduction smooth?

  Thank you all, always appreciate your help!

  Yes.  That's the one. But the blue yeti is rumored to be even better because you can set it to receive the sound of two directions at once.  So you can use it as a micro-sets when you record your own voice but also use it as a two-way microphone, which is very useful if the recording of a conversation between two people.  See here: http://www.bluemic.com/yeti/

  The problem is that there is no provider it Jersey in Australia and not many suppliers to the United States is ready to Board here.

  It's the Podcaster Rhode: http://rodemic.com/microphone.php?product=Podcaster

  But I use a boom microphone Rode with my podcaster and loved it so much I bought another to ride the snowball:

  http://rodemic.com/accessory.php?product=PSA1

  The boom makes it much easier to find a good position for the microphone that still lets me see my Notes slide (voiceover script).

• External microphone level is very low?

  Hi, I have an iMac and am trying to use a condenser nw-700 Neewer with her microphone.

  I have a ghost (an Innogear IG101) supply and it IS lit.

  I have the microphone connected to the power source via an XLR cable, then the power supply of the outputs of the XLR jack 3, 5 mm plug, which is connected to the entrance at the back of my iMac micro.

  Everything is connected and switched on correctly.

  When I put external inputs: Line In System Preferences and/or Quicktime, even with the input volume turned up completely the microphone captures only very low voice.  Typing the spikes the input indicator microphone, so I know that the microphone is "hearing" sounds, but the entry level is low it is essentially useless.  The microphone must be less than 5mm of my mouth and I must scream until it's strong enough in the record.

  Any ideas what is the problem here?  Everything I bought is supposed to be 'plug and play', but it doesn't work well at all.

  According to the info on Amazon, this cannot be used with a Mac.

  

• IMovie 11 for mac preview screen is BLACK during playback for 98% projects (not all).

  iMovie 11 overview screen is black play to 98% (not all) projects. All events are "black". (Projects and events) are PAL 25 fps. The themes and the text added in the past and all audio is fine but the screen goes black when the clips video game.  I can't work on why this is? It would be different if ALL/all did not play properly? I read the other with similar problems and no real solution.

  Charge of Sony DCR - SR100 portable HARD drive via the USB port of

  Please help I have hours and hours of precious memories that I have stored to treat "on a rainy day. I did not use iMovie 11 version (9.0.9) since about Cougar? Now using El Captain 10.11.4

  I didn't use iMovie (purple) mainly because of the bad publicity, & I'm still clinging desperately to iPhoto for the same reason.

  Thank you in anticipation

  The reason for your problem is that iMovie version 9 is not compatible with El Capitan.  El Capitan only works with iMovie 10 (with the purple icon).

  iMovie 10 is very different from previous versions and has lost some features but won others.  The negative publicity is mainly about frustration with the changes to the user interface, help the poorest to burn DVDs, corrected aspect ratio 16:9 and the fall of some older cameras support.  Your camera model is shown as it is supported.  (I preferred iMovie 10 and went in 2013).

  When you run the first iMovie 10 it will offer you to update all of your iMovie projects 9 existing.  It will create a new iMovie 10 library but let your iMovie 9 project files and unchanged events so that they could, for example, be copied to a mac running Yosemite and be used in iMovie 9.

  Geoff.

• Questions about projects in iMovie

  I keep my iMovie projects and events on an external hard drive.  Yesterday, I installed 10 and put iMovie to day of my projects.  For iMovie 10 completely stumped me, I read that v. 9 is still in my computer.  I found, opened it and went to work with my projects.  I found that the text boxes have been bleached.  I could click on them and the text that appeared, but next time, that it came to this part of the film, they have been hidden again.  Help!  Is it because I have updated their?  How can I get them back to normal?

  iMovie 9 does not work properly with El Capitan.  The main problem is with still photos, but there are other things that behave strangely, although I have not heard of it with text boxes.   iMovie 10 is very different and takes some re-learning using the help files that are also at: http://help.apple.com/imovie/mac/10.1/.

  Geoff.

• iMovie allows to reverse parts of my clips when exporting

  I did a project in iMovie about 4.3 minutes long. When I play the project in iMovie, it seems very well (although a lag at some points but I understand that). When I export to file, most of my clips of minute 2.5 to 3.3 get returned vertically and it is a problem for my video. Some of them get completely reversed, and for the other clips, it looks like a given scene is cut in half and that part of it is upside down.

  I tried to delete some of these clips and add them back with the same changes I want, but the export will similarly. I tried to export to the different qualities and compression methods, but still the same.

  When I exported first, knocked over a single clip, and then I tried to export again with a different quality, assuming that there is a mistake in the first place. However, it hit a bunch more of my scenes and he continues doing this.

  I would really appreciate it if anyone has a solution to this problem.

  Thank you!

  I use:

  10.1.1 and OS X 10.11.3 iMovie

  MacBook Pro (retina, 15 inches, mi 2014)

  2.5 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  NVIDIA GeForce GT 750M 2048 MB

  512 GB SSD (125 GB free)

  It is the first report I've seen this problem with 10.1.1 and El Capitan. There has been instances of this version of iMovie 9 and El Capitan. I suggest that you launch iMovie, hold down the command and option keys. In the window that appears, select Delete preferences. After the firing of iMovie try again your export. If that doesn't help I would reinstall iMovie as the next step.

• Is it possible to run two iMovie 11 and 10 on the same iMac?

  I have an older 24 "iMac with iMovie 11 and quite a few projects and movies finished.  I want to know if I update to iMovie 10 I'll be able to jump back between the two applications. Or will10 override 11?

  foxrock321

  "I can jump back between two apps"

  Yes, you do.  When you install 10 iMovie, iMovie 11 will be placed in its own folder in the Applications folder and will still be usable.  When you launch iMovie 10 it will you update your projects and events from iMovie 9.  (You don't have to do it immediately and can do so at a later date).  iMovie 10 will create a library package that will be used by iMovie 10 the entire edition.  Records of events and projects iMovie 11 will remain and can still be used with iMovie 11.

  Of course all changes in a future version will not appear in the other, they will work on various issues, but gives you the opportunity to try iMovie 10 before committing to use iMovie 10.  It is best not to transfer projects that are in the middle of editing between versions as you can find that there are a few problems.  iMovie 10 is very different from earlier versions, so there is a bit of a learning curve.

  Note: Avoid updating your operating system on El Capitan, until you came to iMovie 10 as earlier versions have problems running under El Capitan.

  Geoff.

• Tecra M11 - very low audio volume

  I have a Tecra M11 for a few months and I am overall very happy with my new laptop.

  A question I have is the speaker volume level. When I play the video or the sound of music is about audible, even with the speakers lining and the relevant channels appeared in the volume mixer in Windows 7.

  When I open volume mixer I see that the speaker volume is at max, where is the application that plays music. I can't bar which moves vertically to show the level of the sound playback, a green one, and it does not go beyond 25% of the full bar.

  Everyone experienced, or got any advice on how I can get my speakers a little harder?

  Al

  Have you tried reinstalling the Audio driver?

  External speakers work ok?

  Have you installed the latest version of the BIOS?

  If you play a Midi file, is also very sweet?

• HP Office Jet 8600. Low voice, trying to fax

  HP Office Jet 8600.  Trying to send fax when a voice comes through the printer said something in a very low voice. So low canoe do you what what they saying ar. Is their any way to turn the sound all in one printer?

  Hey tiber,.

  I would like to start by saying, I paraphrase to make sure that I fully understand what the customer is asking. In this case, my first thought was something like that, "I understand you're hearing voices {joke}.

  Joke all aside, I do not think it is a volume control on the printer. There is an option to increase the Volume of his Fax, but I think it's for the ringtone. Discover

  If you tap on the arrow to the right of the printer, then tap the settings icon, you can select the fax configuration option. In the configuration of the fax machine, go to the configuration of the fax machine and choose the Volume of its Fax - strong.

  I suspect that the voice you hear is probably an operator saying something like "Please hang up and try your call again."

  I hope this helps.

• Change the voice in Microsoft Narrator

  Original title: Narrator

  When I select her choose a voice option there is only one and when I bought my Windows 7 in January 2010, there were 4-5 to choose from. Can they be reloaded without having to reload the entire operating system?

  Hi Mastressa,

  By default, Microsoft provides a single voice. I personally check in my computer and also our computer lab, I could find only one default voice

  When you purchased the computer, your computer manufacturing could include additional voices. I would ask you to check with your computer manufacture to get help.

• Adobe on iOS voice: can change us the watermark?

  We look at using adobe voice to create business presentation videos, but we cannot use them with the watermark that appears at the end of the video, can we manually change this using video editing software?

  Please visit the Adobe voice user forum and post your question here:

  Adobe voice | Community customer Photoshop family