Site updated signature Cisco down?

Similar Questions

• Get a Smartnet contract also gives you updated signature IDS/IPS?

  One of my clients is looking into getting an ASA5510 with module AIP - SSM. I realize that with IDS/IPS systems, it is * essential * to keep files up-to-date signatures. Buying me the Smartnet contract for the bundle gives updates signature files, or is there another package that I need to buy?

  I see references to the "Cisco Services for IPS", but this seems to be mainly for routers/IOS firewall/IDS packages.

  There is not a Smartnet contract for the ASA/AIP-SSM bundle.

  The only contract SmartNET SSM packages with the CSC - SSM and not the AIP - SSM.

  When buying a bundle ASA/AIP-SSM, you'll need to buy a package maintenance contract. Package maintenance contracts are Cisco Service for the IPS markets and include the support of signature for the AIP - SSM and the software and hardware in support of ASA and AIP - SSM (software and hardware support, is what it is normally part of SmartNET).

  Packages you will need to purchase a maintenance contract Service Cisco IPS using one of the formats following part numbers:

  CON-SUw-ASxAyKz

  The 'w' will be 1,2,3 or 4 depending on the level of service.

  The 'x' will be either 1 for the 5510, 2 for the 5520 or 4 for the 5540.

  'Y' will be 10 for the AIP-SSM-10 or 20 for the AIP-SSM-20.

  The z will be 8 or 9 depending on the level of encryption.

  Thus, for example:

  CON-SU2-AS2A20K9 - would be 8 X 5 X 4 support for the ASA 5520 bundled with the AIP-SSM-20 with the top encryption.

  NOTE: There is also SP contracts for purchase by service providers who follow a slightly different format.

  There are a few users who have purchased the ASA and the AIP - SSM separately.

  When purcahsed separately you would need to purchase a contract SmartNET for the ASA and a separate Department of Cisco for IPS for the AIP - SSM maintenance contract.

  Maintenane AIP - SSM contract will be in the following format:

  CON-SUw-ASIPyK9

  The 'w' will be 1,2,3 or 4 depending on the level of service.

  'Y' will be 10 for the AIP-SSM-10 or 20 for the AIP-SSM-20.

  Thus, for example:

  CON-SU2-ASIP20K9 would be 8 X 5 X 4 support for the AIP-SSM-20.

  What you find is that buying a separate SmartNET for the ASA and Service Cisco IPS for the AIP - SSM will be more expensive than buying a single Cisco IPS's Service to the ASA/AIP-SSM bundle. This is because there is a discount when buying by the beam.

• Tecra M5 PTM51L: I do not consider the Tosh site updates

  My computer has the model the basement number Tecra M5 model No. PTM51L 0JG010.
  I can't find software for the toshiba site updates. All updates are for PMM51U-xxxxx and nothing for above mentioned model.

  I don't understand this thing. I bought this laptop from my store to University in October.
  Thanks for your help.

  Hello

  I wonder where you were looking for the drivers.
  The European sites of Toshiba provides drivers for Tecra M5.
  There is no additional room number, only Tecra M5

  Then perhaps you will check drivers from this page

  The Canadian site of Toshiba provides pilots of the PTM51C series.
  It seems that this series was designed only for the Canadian market.

  I found the series Tecra PTM51A Toshiba Australian and New Zealand site.

  But nothing on the PTM51L series.
  Then try to download the drivers from the European site and install it in the right order!

• Can anyone help me to get these security updates 12 windows down load to my computer windows XP system please... ?

  I can't get these updates of windows down load on my computer, they have all failed, can someone help me please? Whenever I try to install these updates directly from the center of update of microsoft all fail.

  Microsoft Windows XP

  Update security for Windows XP (KB2862152)
  Update security for Windows XP (KB2868626)
  Update security for Windows XP (KB2876331)
  A security update cumulative for the stop bits ActiveX for Windows XP (KB2900986)
  Update security for Windows XP (KB2893294)
  Update security for Windows XP (KB2892075)
  Update security for Windows XP (KB2893984)
  Update security for Windows XP (KB2898715)
  Update for Windows XP (KB2904266)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2898785)
  Update security for Windows XP (KB2914368)
  Update security for Windows XP and Windows Server 2003 (KB2917500)

  You don't have to trade your jewelry for this

  http://support.Microsoft.com/kb/942288

  Here are some links to validation

  Download the plugin http://www.Microsoft.com/Genuine/Validate/

  http://www.Microsoft.com/en-us/download/genuine-validation.aspx

  http://www.Microsoft.com/en-us/download/exe-validation.aspx?ID=0

  Call Microsoft technical support to the 1-800-642-7676

  If the COA sticker is missing then you may have a keyfinder product if you need the validation key or if you plan to reinstall the operating system

  http://pcsupport.about.com/od/tipstricks/HT/findxpkey.htm

  http://pcsupport.about.com/od/system-security/FR/Belarc-Advisor-review.htm

  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  Go to start > run > wuaucpl.cpl > OK

  Turn on automatic updates > apply (if the setting is changed) > OK

  You can change this later if you wish, but for now, try this setting on .

  Recommend that you run the following patch & reboot

  http://support.Microsoft.com/kb/949104/en-us

  or this difficulty it

  http://support.Microsoft.com/kb/2714434/en-us

• Ao access o site updated, recebo o erro 0x8024402F

  Ao access o site updated, recebo o erro 0x8024402F

  Desculpe, mas estes foruns only offer suporte em ingles. Please do o seu País here: http://support.microsoft.com/common/international.aspx> e click na seta para suporte em seu idioma.

  http://support.Microsoft.com/kb/836941/PT

  UTC/GMT is 18:53 on Thursday, July 5, 2012

• Site update for unit test infrastructure Momentics

  I asked this question in the forum WebWorks and got no response... I was hoping this would be a trivial:

  I want unit test my native extension WebWorks. I came across this video and presentation PDF of BlackBerry https://bblive.blackberryconferences.net/2013/connect/sessionDetail.ww?SESSION_ID=2735 . This suggests that you have developed an extension for this purpose. On slide n ° 7, it says 'add site update... '. "where the plugin can be sought.

  Unfortunately, the URL of the update site is not mentioned in the PDF or a video presentation and I can't seem to find anywhere on the net... One of the admins know what this could be?

  Maybe this one: https://github.com/blackberry/MomenticsUnitTestingPlugin ?

• AIP - SSM, failure to update the cisco Web site

  Hi all

  I want to know the reason why my AIP - SSM fails to update its signatures automatically from cisco website. I put the module do cisco automatic signature update, but it doesn't matter when he tries to update, it displays an error message that reads "= error: exception Autoupdate: HTTP failed to connect (1 111) ' find the exact error message attached. The interface of my AIP - SSM is behind the proxy of the company and I put the proxy to allow Module AIP - SSM establish a connection to the internet.  What could be wrong?

  Your help will be very appreciated.

  Concerning

  Automatic update to the signature of the IPS is not supported through proxy server.

  The configuration of the proxy server on the IPS is only for the overall correlation.

  You must allow direct access for the automatic update of signature to IPS.

• Site updated free from the merger of 2 or 3 down?

  Hello VMware, I applied for a free upgrade to Fusion 3 October 29 since I purchasedversion 2 4 Oct. The next day, I applied for the free upgrade bysending information required for [email protected] Ireceived an e-mail of http://vmwaresupport.mediuscorp.com/vmware/view.php? . The email gave a link to check the status. The link showed 'OPEN' for a week, and now the link to check the status appears as an invalidlink. I posted this in error at the end of someone elses post this weekend, but thought I should create a new post on Monday morning. As forum poster lschen yesterday mentinoed, emails are also sent back to [email protected]. Can you recommend what should I do to complete the free application for upgrade license number? Thank you! Post edited by: appxjoe to goofy formatting issues of post.

  I was able to get in Exchange for "https" to "http" in the URL provided in the email

• Update zone drop-down list programmatically does not update its local variable

  Hi all

  I followed a Web site tutorial OR and programmatically change the items in a drop-down list box. It worked successfully, but not for local variables. Local variables while keeping the elements that had it before.

  Any suggestions?

  Thank you!

  

  You must update programmatically property value to change which returns the local variable, the value that you will wire does not match with one of the array strings.

  Maybe you need to do something like this to update your value to change the 'Two' to 'five '.

  

• Microsoft's Windows Update server is down?

  Whenever I try to go to Windows Update (wither through my PC or Microsoft own website) I get a message "the connection was reset".  And it also just happened when I tried to present an earlier version of the same question. (This is why I ask again, if both appear). Therefore, Windows Update server down, or is this a problem with my PC? And if the latter, please point me to information about the restoration of the automatic Windows Update service. Thank you very much!

  Boston

  How to configure and use automatic updates in Windows XP http://support.microsoft.com/default.aspx?scid=kb%3b%5bLN%5d%3b306525>

  on the restoration of the automatic Windows Update service.

  The site cannot continue because one or more of these Windows services does not work:

  Automatic updates (allows the site to find, download and install the priority updates for your computer)

  Background Intelligent Transfer Service (BITS) (helps updates download more quickly and without problem if the download process is interrupted)

  Event log (keeps a record of updating activities of troubleshooting, if necessary)

  To ensure that these services are running:

  1. click on start and then click Run.

  2. type services.msc, then click OK.

  3. in the list of services, double-click on automatic updates, and then click Properties.

  4. in the startup type list, select automatic and click on apply.

  5. Verify that the service status is started, if the service status is stopped, click the Start button.

  6. in the list of services, double-click on Background Intelligent Transfer Service (BITS), and then click Properties.

  7. in the startup type list, select manual and click on apply.

  8. check that the service status is started, if the service status is stopped, click the Start button.

  9. in the list of services, double-click the event log and then click Properties.

  10. in the startup type list, select automatic and click on apply.

  11. check that the service status is started, if the service status is stopped, click the Start button.

  Download and * record * the Fixit on this page: http://support.microsoft.com/kb/971058

  Click the Fixit; When you are prompted to run or save Microsoft fix 50505.msi, choose * Save *.

  Once the download is complete, if it's Windows XP, read this:

  How to configure Windows XP to start in a "clean boot" Statehttp://support.microsoft.com/kb/310353

  Configure the system according to the above article.  Then restart the clean boot state, run Microsoft fix 50202.msi and choose it is aggressive mode.

  NOTE: the system * must * be connected to internet for the executed aggressive mode. Make sure that the native XP firewall is on checking in Control Panel > Windows Firewall * IF * a 3rd party firewall was used by a security suite or by itself.

  It is off when the system is configured to clean boot.

  Restart when the Fixit has finished its operation and see if the system can be updated while remaining in the clean boot state.

  If possible, 3rd party software was interfering with the process of update (anti virus/security suite, etc.).

  If it cannot be updated, please report at least the * last * 50 or if WindowsUpdate.log lines in your answer:

  How to read the Windowsupdate.log file http://support.microsoft.com/kb/902093

• Update Signature IPS S511 for Security Manager

  Hello!

  Anyone tried to use up-to-date signature IPS S511 for Cisco Security Manager?

  I downloaded the IPS-CS-MGR-sig-S511-req-E4.zip file and checked md5 somm. The amount calculated was as specified on the cisco.com site. But it is impossible to use the zip file.

  Unzip the following shows:

  [email protected] / * /: / tmp/u > unzip-l IPS-CS-MGR-sig-S511-req-E4.zip
  Archive: IPS-CS-MGR-sig-S511-req-E4.zip
  End-of-Central-Directory signature not found.  Either this file is not
  a zip file, or it is one of the discs of a archive in several part.  In the
  This last case the central directory and zipfile comment will be located on
  the last records of this archive.
  unzip: cannot find zipfile directory in one of the IPS-CS-MGR-sig-S511-req-E4.zip or
  IPS-CS-MGR-sig-S511-req-E4.zip.zip and cannot find IPS-CS-MGR-sig-S511-req-E4.zip.ZIP, period.

  WinZip is an error too.

  had the file IPS-CS-MGR-sig-S511-req-E4.zip be removed as with 8,0000 3427 MARCH upgrade?

  Kind regards

  This issue has been addressed and CSM should be able to retrieve and deploy S511 successfully.

  Scott

• Software update of Cisco anyconnect

  We organize two CISCO ASA 5510 on two sites that have bundles of Cisco Anyconnect 2.3 on them.  We want to install Cisco anyconnect 2.5 package, my question is if I update packets on Cisco ASA will be that force users to upgrade to 2.5 when they try to connect via the web browser?  What happens if they just use the anyconnect software to connect to the vpn, is quite smart to know there is a software update?

  Thank you!

  Yes, it will be automatically updated regadless of how you connect.

• Windows updates significantly slows down my computer

  Whenever my computer is a windows update that it slow down my computer, I need to run a virus scan that helps a little but it still runs slowly takes about 5 to 10 minutes to restart.

  If your antivirus software is nothing else than the windows Defender - you might want to experiment & uninstall it.

  Visit the support site anti virus and find their methods of uninstalling...  Many antivirus programs really need a separate download program to uninstall them successfully.   When you see that windows Defender is working properly, it's a good indication that you probably have a successful uninstallation.

  Maybe... then your computer might speed up you decide to reinstall the anti-virus program or not.

• Popup declared attempt to access Firefox; clocked to 'block '. now can not access ALL Web sites; update did not help; What's wrong??

  Reported popup web site tries to access Firefox (don't remember exact message); available buttons: allow once, allow, block; has chosen the block (I selected allow once before, but that seemed to be a bad idea). After that, I get "Unable to connect" no matter where I go. You had to use IE to join of Mozilla.org. Firefox update did not help. Troubleshooting procedure did not help.

  Hello, this looks like a problem with your security/firewall software blocking the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• Mail signature drop-down list is not displayed

  Hi all, I have a problem using Mail v9.3 with OS X El Capitan v10.11.5 because it is not display the drop-down list of signatures in the new email or reply/forward an email windows.

  

  I checked all the Mail preferences, and I see all the associated parameters.

  

  Can someone help me?. Thanks in advance.

  Please take these steps to remove the mail folders 'sandbox '.

  Step 1

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Reveal

  the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

  Log off or restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

  CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

  Step 2

  If step 1 does not resolve the problem, repeat with this line:

  ~/Library/Containers/com.apple.MailServiceAgent

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.