Impdp errors in 10.2.0.1

Similar Questions

• Impdp errors 39002-39070 - 29283-06512

  Hello world

  I am an intern and I never work on DB before. I tried a lot of time on the internet but I have not found a solution that works for the moment.

  I am running Windows XP 32 bit, Oracle 11 g (11.2.0.1.0)

  I'm actually trying to import schemas with datapump on my local DB .dmp file. My boss gives me a .dmp file from her computer and I put it in a folder (C:\datapump) on my computer.

  I have already created "user" on my DB and a record "datapump" on my DB to.

  I tried: impdp username/password SCHEMA schema_name DIRECTORY = datapump DUMPFILE = ext_file.dmp =

  And I have this error:

  ORA-39002: invalid operation

  ORA-39070: unable to open the log file

  ORA-29283: invalid file operation

  ORA-06512: at "SYS." UTL_FILE", line 536

  ORA-29283: invalid file operation

  What stage have I missed? A I forgot something to do before the import?

  I do not know if I give you all the information on my application so tell me if I forgot something.

  Thanks and sorry if I made some mistakes in English!

  Do something like this:

  SQL > select * from dba_directories;

  SQL > CREATE DIRECTORY dpump_dir1 AS "d:\". » ;

  SQL > GRANT READ, WRITE ON DIRECTORY FOR system dpump_dir1;

  SQL > select * from dba_directories;

  Set DPUMP_DIR1 = DATA_PUMP_DIR

  Set ORACLE_SID =

  Impdp system / ^.

  METRICS = y ^

  logfile = % ORACLE_SID %. Impdp.%tables%.%D ate:~10,4%%date:~7,2%%date:~4,2%.log ^

  dumpfile = ext_file.dmp

• Impdp error

  Hello

  I am importing a table from one database to another and this must be imported to another user.

  Impdp sqlplus system/***@rosodsu4 remap_schema = idsstg:idsstg_test table is IDSSTG. Directory MBRSHP_COV_ULP_DNTL = logfile = 10_28_imp.log dumpfile = ROSODSP_Dental_backup_IDSSTG_MBRSHP_COV_ULP_DNTL_10162013.dmp test

  I get an error message

  UDI-00008: operation generated ORACLE error 1017

  ORA-01017: name of user and password invalid. connection refused

  User name:

  UDI-00005: unexpected end of file encountered when reading.

  I am able to connect to the source and the target DBs with the user of the system.

  Please advise on this.

  Kind regards

  VN

  each connection request (same one from the impdp ORA-01017) is recorded by the listener.

  excerpt from auditor post log file that shows the application should the listener & the database.

• Import (IMPDP) error 4031

  Aloha!

  I'm currently import a dump with a parameter.

  the system schemas Impdp = name directory = BW_TEMP TABLE_EXISTS_ACTION = REPLACE dumpfile = DUMP. Logfile = log.log DMP

  and import, I encountered this error;

  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA

  . . imported 'name '. "' TABLE ' lines of 13.08 82007 MB

  . . imported 'name '. "' TABLE_T ' lines of 12.98 MB 81392

  UDI-04031: operation has generated ORACLE 4031 error

  ORA-04031: unable to allocate 32 bytes of memory ('pool', ' SELECT job_id FROM v$ datapum... ") (', 'SQLA","tmp") shared

  ORA-06512: at "SYS." "KUPV$ FT_INT", line 2904

  ORA-06512: at "SYS." ' KUPC$ QUE_INT ', line 572

  ORA-25254: time-out in LISTENING while waiting for a message

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 3263

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 4488

  ORA-06512: at line 1

  
  

  =====================================
  

  SQL > show sga

  Total System Global Area 367439872 bytes

  Bytes of size 2213456 fixed

  293603760 variable size bytes

  Buffers data 67108864 bytes

  Redo buffers 4513792 bytes

  SQL >

  Above are my parameter.

  The system is 11g R2 on OLE5

  Your help is greatly appreciated.

  Kind regards

  Hades

  Hello

  You may need to increase the value of the SGA. also check the doc of metalink:

  Troubleshooting and diagnosis of error ORA-4031 [Video] [ID 396940.1]

  HTH

• migration by expdp/impdp db to AIX and Linux. Impdp errors, help.

  Hi, I did complete expdp (11 GR 1 material) and complete impdp (11 GR 2) migrate db from aix to linux.
  
  I have the following questions in mind:
  (1) I checked the imp papers and found a lot of mistakes. I think that most can be ignored, but I just want to be double sure before that I release the new db migrated for use. Is there a better way to avoid these mistakes?
  
  
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" MVIEW$ _ADVSEQ_GENERIC ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" MVIEW$ _ADVSEQ_ID ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" REPCAT$ _EXCEPTIONS_S ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" REPCAT$ _FLAVORS_S ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" REPCAT$ _FLAVOR_NAME_S ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" REPCAT$ _REFRESH_TEMPLATES_S ' already exists
  ......
  Table 'SYSTEM '. "" REPCAT$ _AUDIT_COLUMN "exists. Data will be added to the existing
  table but all dependent metadata will be ignored because the table_exists_action a
  ppend
  Table 'SYSTEM '. "" REPCAT$ _FLAVOR_OBJECTS "exists. Data will be added to the existin
  Table g but all dependent metadata will be ignored due to table_exists_action of
  Add
  Table 'SYSTEM '. "" REPCAT$ _TEMPLATE_STATUS "exists. Data will be added to existi
  ng table but all dependent metadata will be ignored due to table_exists_action o
  f add
  .......
  Treatment of type of object DATABASE_EXPORT/SCHEMA/VIEW/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRAN
  T
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_WORKLOAD ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_FILTER ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_LOG ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_FILTERINSTANCE ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_RECOMMENDATIONS ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_EVALUATIONS ' already exists
  ...............
  
  . . imported 'SYSTEM '. "" REPCAT$ _TEMPLATE_REFGROUPS ' 5,015 KB 0 rows
  . . imported 'SYSTEM '. "" REPCAT$ _TEMPLATE_SITES ' 5,359 KB 0 rows
  ORA-31693: Data Table object 'SYSTEM '. "" REPCAT$ _TEMPLATE_STATUS ' failed to load/u
  nLoad and being ignored because of the error:
  ORA-00001: unique constraint (SYSTEM. REPCAT$ _TEMPLATE_STATUS_PK) violated
  . . imported 'SYSTEM '. "" REPCAT$ _TEMPLATE_TARGETS ' 4,937 KB 0 rows
  ORA-31693: Data Table object 'SYSTEM '. "" REPCAT$ _TEMPLATE_TYPES ' failed to load/United Nations
  load and being ignored because of the error:
  ORA-00001: unique constraint (SYSTEM. REPCAT$ _TEMPLATE_TYPES_PK) violated
  . . imported 'SYSTEM '. "" REPCAT$ _USER_AUTHORIZATIONS ' 4,773 KB 0 rows
  . . imported 'SYSTEM '. "' SQLPLUS_PRODUCT_PROFILE ' 5,140 KB 0 rows
  . . imported 'SYSTEM '. "' TOAD_PLAN_SQL ' 4,859 KB 0 rows
  
  
  (2) in addition, I've seen a few new users 11 GR 2 is not in 11R1, I should not worry update these users, right?
  
  Thank you in advance.

  You receive the ORA-31684: SEQUENCE object type: 'SYSTEM '. "" MVIEW$ _ADVSEQ_GENERIC "already exists, because the SYSTEM object already exists. You can ignore this error.

  You can also view links below

  Cross platform Transportable Tablespace with RMAN
  http://www.oracleracexpert.com/2009/08/transportable-tablespace-export-import.html

  Import/export transportable tablespace on the same endian platforms
  http://www.oracleracexpert.com/2009/10/cross-platform-transportable-tablespace.html

  Hope this helps,

  Concerning
  http://www.oracleracexpert.com
  Block of Corruption and recovery
  http://www.oracleracexpert.com/2009/08/block-corruption-and-recovery.html]
  Redo log corruption and recovery
  http://www.oracleracexpert.com/2009/08/redo-log-corruption-and-recovery.html]

• the impdp error: ORA-02374: conversion error loading table

  Hello
  
  I'm trying to convert the WE8ISO8859P1 character set AL32UTF8 using expdp/impdp. for this I first convert WE8ISO8859P1 WE8MSWIN1252 in source DB to get rid of the data "lossy." I created new (target) database with character set AL32UTF8 and nls_length_semantics = "CHAR" and donated all the tablespaces as source DB with auoexend. I took a full export (expdp) source DB excluding the TABLESPACE, STATISTICS, INDEXES, CONSTRAINTS, REF_CONSTRAINT and imported using impdp to target DB. I found error below in the import log file:
  
  ORA-02374: error loading «SCTCVT» conversion table "" SPRADDR_CVT ".
  ORA-26093: size of the input data column (44) exceeds the maximum input size (40)
  ORA-02372: row data: CONVERT_STREET_LINE1: 0 X '20202020202020202020202020202020202020202020202020'
  
  I checked with a select query on the two DBs with inferior results.
  
  Source D:
  04:58:42 SQL > select count (*) of "SCTCVT". "" SPRADDR_CVT ";
  
  COUNT (*)
  --------
  74553
  
  target DB:
  04: 59:24 SQL > select count (*) of "SCTCVT". "" SPRADDR_CVT ";
  
  COUNT (*)
  --------
  74552
  
  
  Please suggest me a solution to this.
  
  
  Thank you and best regards.
  
  Edited by: user12045167 may 9, 2011 22:39

  I think that, if you change your column of the table length CONVERT_STREET_LINE1 this help you.

  alter table "SCTCVT"."SPRADDR_CVT" modify (CONVERT_STREET_LINE1 varchar2(50));
  

• Impdp error number of bytes is greater than the limit of varchar2

  Hello
  I have a problem migrating data to a database with Western Europe of characters to a new database with UTF-8 Charter game. I know that this has to do with certain characters using more then one byte in a UTF character database. But as I have a varchar2 column is configured with 4000 bytes as limit and imp reports error as some lines exceeds 4000 and real need is 4009 byte that is not possible as varchar2 limit is 4000 bytes.
  I need to identify the lines that exceed 4000 bytes.
  
  Change the data type is not an option.
  
  Anyone has any ideas on how to identify the lines beyond 4000 bytes, or someone at - it a query that allows you to query the environment with all of the above lines existing 3980 bytes in this column?
  Concerning
  933746

  The csscan character set Scanner Utility will report on all the lines that will be damaged by the character set change (even if you have to correct them yourself), it is described in the globalization support Guide.

• Impdp error Oracle 11 g

  Hi guys
  
  Please help
  
  Thank you.
  
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit
  Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  Main table 'SYSTEM '. "' SYS_IMPORT_FULL_01 ' properly load/unloaded
  Start "SYSTEM". "" SYS_IMPORT_FULL_01 ": System / * DIRECTORY = data_pump_dir
  DUMPFILE = livelink_exp.dmp LOGFILE = livelink_imp.log REMAP_TABLESPACE = LLDB:LLED R
  EMAP_SCHEMA = LIVELINK:EDMSDB
  Processing object type SCHEMA_EXPORT/USER
  ORA-31684: USER object Type: 'EDMSDB' already exists
  Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
  Processing object type SCHEMA_EXPORT/ROLE_GRANT
  Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
  Processing object type SCHEMA_EXPORT/TABLESPACE_QUOTA
  Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
  Object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE of treatment
  Object type SCHEMA_EXPORT/TABLE/TABLE processing
  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
  . . imported "EDMSDB." "' LLCACHE ' 14,17 GB 5360060 lines
  ORA-39171: job knows a wait can be resumed.
  ORA-01691: impossible to extend lob EDMSDB segment. SYS_LOB0000071556C00004$ $ by 8192
  in tablespace FILLED

  Hello

  Increase the size of FILLED TS and do until source TS database size.

• Upgrade database Oracle 10 g to 11g use Datapump

  Hi all
  
  I'm planning our oracle 10g to 11g database use datapump in windows environment. I used developer sql to perform the upgrade in a TEST environment, I took any export DB 10 g and I then imported into DB 11 g. but I faced a lot of error during the import. So, I have attached the log file and I wait your help.
  
  [Log file | https://dl.dropboxusercontent.com/u/14131772/IMPORT.LOG]

  user13289313 wrote:
  Regarding this error ORA-31684: type of the object TYPE: "SYSMAN." "' MGMT_JOB_STEP_LIST ' is already no problem with him.

  But what of the errors below.

  ORA-39083: Type as procact_system cannot be created with the object error:
  ORA-20000: Incompatible Version of the Workspace Manager installed
  Because sql is:
  BEGIN
  declare the worm varchar2 (100); entire dummy; vdummy varchar2 (30); compile_exception EXCEPTION; PRAGMA EXCEPTION_INIT(compile_exception,-06550); invalid_table EXCEPTION; PRAGMA EXCEPTION_INIT(invalid_table,-00942); createErrorProc procedure is immediately start run "create or replace function system.wm$ _check_install return boolean is begin to return the value true;"
  Treatment of type of object DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ
  ORA-39083: Type THAT PROCOBJ cannot be created with the object error:

  PL see this Doc MOS

  DtaPump Import (IMPDP) error ORA-39083 ORA-20000 when Incompatible Version of the Workspace Manager is installed [ID 730373.1]

  ORA-39325: TABLE_EXISTS_ACTION cannot apply to "SYSMAN." "" MGMT_METRIC_COLLECTIONS ".

  ORA-31693: Table object "SYSMAN data." "' MGMT_JOB_CRED_PARAMS ' failed to load/unload and being ignored because of the error:
  ORA-29913: error in executing ODCIEXTTABLEOPEN legend
  ORA-29400: data cartridge error
  ORA-39779: Type "SYSMAN." "' MGMT_JOB_VECTOR_PARAMS ' not found or conversion to the latest version is not possible

  ORA-31693: Table object «OLAPSYS» data "" CLASSIFICATION of CWM to $"could not load/unload and being ignored because of the error:
  ORA-29913: error in executing ODCIEXTTABLEFETCH legend

  You use the OLAP features? If this is not the case, this can be ignored.

  Information about the installed database components and patterns [ID 472937.1]

  >

  ORA-39112: type of dependent object TRIGGER: "SYSMAN." «MGMT_SEVERITY_UPDATES ' ignored, base object type TABLE: "SYSMAN".» "" Creation of MGMT_SEVERITY ' failed

  ORA-39148: cannot import data in pre-existing table "SYSMAN" of the queue. "" AQ$ _MGMT_NOTIFY_QTABLE_G. Table_exists_action of ADD is ignored for this table.

  Ignore all the SYSMAN errors

  HTH
  Srini

• User header imported successfully, Impdp import the same user has: b getting object exists error

  Hello

  My scenario

  In our database of prod, we have user A that I recently imported A user in the Test database

  Now I need to import user A user B in the same Test database but get error object exists

  ORA-39151: Table "A.Table_Name" exists

  ORA-31684: Procedure 'A.Proc_Name' exists

  My impdp syntax is the following:

  Impdp USERID =------"/ ACE sysdba\ ' DIRECTORY = DATA_PUMP_DIR DUMPFILE = A.dmp EXCLUDE = USER LOGFILE = A_TO_B_imp.log

  REMAP_SCHEMA = A: B

  REMAP_TABLESPACE = USERS: B

  I thought that this was caused by the fact that the two user B in the database Test with same Tablespace by default, so I created a different tablespace for user B and provided remap tablespace parameter but still getting the same error.

  Please notify.

  Hello

  Seems for some reason any your part of remap_schema is not recognized.

  In the beginning of the impdp log, you should see the command it uses,

  Can you confirm the exact order impdp journal tries to run.

  Also run the impdp since the user of the system.

• expdp/impdp method in the database upgrade from 11.2.0.4 to 12.1.0.2 an error in logic of "command line"?

  Hi DBA:

  We are evaluating different methods of upgrading 11 GR 2 DB to 12 c (12.1.0.2) this year, it is very important for us to use the right method.  It was reported that when DB version was 9i and has been updated to 11g, there were some order of tables 'line' was wrong when execute SELECT statements in application (Java application) - at the moment I didn't if it is ' select * from... "or any specific part with a"where"clause, and what type of data was wrong (maybe sequence CLOB data, etc.).

  I think I know, ' exp/imp', "expdp/impdp" logical backup of DB methods.  Therefore, Oracle automatically import data and fix it in each table.  If no error in impdp connects after it's over, should not be any mistake, right?

  If the use of the method of 'creates a new data + expdp/impdp basis for schemas user' 11g 12 c port data, questions:

  1. this method will lead to erroneous sequence data when ordering?  If so, how to re - generate the sequence number?

  2. this method can bring CLOB, BLOB data and without any errors?  If error, how to detect and repair?

  I use the same method in the 10.2.0.5 to 11g port data, no problem.

  I'll keep this thread posted after getting more information from application.

  Thank you very much!

  Dania

  INSERT... SELECT, CREATE TABLE in the SELECT and Export-Import will all "re-organize" the table by assigning new blocks.

  In place--update (using DBUA or command line) don't re-create the user tables (although it DOES not rebuild the data dictionary tables).  Therefore, does not change the physical location of lines for user tables.  However, there is no guarantee that a further reason for INSERT, DELETE, UPDATE instructions does not change the physical location of ranks.  Nor is it a guarantee that a SELECT statement will return always stored in the same order unless an ORDER BY is specified explicitly.

  If you export the data while it is still used, you don't avoid update sequences in the source database.  Usually results in a mismatching number sequence between the source database and the new database (imported). In fact, even the numbers may be different, unless you use CONSISTENT or FLASHBACK_SCN.  (These two options in exp / expdp do NOT prevent update sequences).   The right way to manage sequences is to rebuild or increase them in data imported with the values in the data source, once the import is complete.

  Hemant K Collette

• dmp Impdp file error: ORA-29283: operation invalid file ORA-06512: at "SYS." UTL_FILE", line 536

  Hi all.

  Sorry to ask this error again, I read a lot of topic in this forum on this subject, but I can't fix it.

  So I create this topic.

  My computer is running oracle database 11 g 2 express edition on ubuntu LTS 14.04.

  I'm trying to import the database of dmp file. That's what I do:

  
  

  > sqplus

  opening session with sys as sysdba, then run:

  Hoangnv CREATE USER IDENTIFIED BY hoangnv;

  GRANT CONNECT TO hoangnv;

  GRANT RESOURCE, s/n hoangnv;

  CREATE OR REPLACE DIRECTORY dmpdir AS ' / home/hoangnv/downloads/db ";

  GRANT read, write the DIRECTORY ON dmpdir TO hoangnv;

  
  

  my_project.dmp file is stored on /home/hoangnv/Downloads/db folder.
  

  Finally, I ran the command below in terminal:

  impdp hoangnv/hoangnv@xe directory = dmpdir dumpfile = my_project.dmp logfile = my_project.log

  
  

  That's what see the Terminal:

  ORA-39002: invalid operation

  ORA-39070: unable to open the log file.

  ORA-29283: invalid file operation

  ORA-06512: at "SYS." UTL_FILE", line 536

  ORA-29283: invalid file operation

  Any ideas? I run these commands on window and import the database successfully.

  Hello

  Please try the suggestions below:

  1. make sure that the roles granted to the user are 'default' for him.

  SQL > change the user hoangnv the role by default all;

  then try to re-import.

  Note: the DBA role contains the IMP_FULL_DATABASE with it.

  2. try import with the use of the 'System' this time, which is the result then? don't forget to give the system read, write on directory dmpdir.

  3. is the permission to/home/hoangnv/Downloads/db fine OS?

• Impdp not connect to the database without error returns

  Kind regards.

  Please ask your usual support, motivated, that I am facing a strange problem.

  I recently did an expdp of different actions, the database on which the export is carried out version 10.2.0.4 Now, I'm doing impdp on a database whose version is 10.2.0.5.

  The Datapump not return any errors, does not seem to connect to the database, the impdp log shows:

  ;;;

  Import: Version 10.2.0.5.0 - 64 bit Production on Friday, August 7, 2015 11:13:43

  Copyright (c) 2003, 2007, Oracle.  All rights reserved.

  ;;;

  Connected to: Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production

  With the partitioning, Data Mining and Real Application Testing options

  I wonder if this is a bug or compatibility of version of the problem.

  Thanks in advance.

  Best regards.

  The first thing I see is that you specify on the impdp command expdp.par.  This can work, but don't forget, there are expdp parameters that do not work in impdp. This should give an error, but not knowing what is in the file, it is difficult to see what might happen.

  You can add trace = ff0b00 and then watch to see is it y * dw*.trc files were created.  If not, then it is failing in the treatment of your settings and you want to in the last * dm*.trc file can help out you.

  Dean

• IMPDP import DataPump fails with error ORA-31626 ORA-6512 31637 ORA ORA-31632 ORA-31635

  Hello

  
  As he attempted an impdp, I get after the sequence of errors-

  
  ORA-31626: there is no job
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 79
  ORA-06512: at "SYS." "KUPV$ FT", line 885
  ORA-31637: failed to create the SYS_IMPORT_TABLE_01 work for user LSU
  ORA-31632: table main "LSU. SYS_IMPORT_TABLE_01"not found, invalid or unreachable
  ORA-31635: impossible to establish synchronization job resources
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 79
  ORA-06512: at "SYS." "KUPV$ FT_INT", line 1986
  ORA-04063: package body 'SYS. DBMS_LOCK"contains errors
  ORA-06508: PL/SQL: called program unit is not found: 'SYS. DBMS_LOCK.

  
  Parameters passed to impdp are also less

  Impdp sjm/xxxxxx@flman700 DIRECTORY = temp_dir DUMPFILE = dyman01_exp01.dmp, dyman01_exp02.dmp, dyman01_exp03.dmp, dyman01_exp04.dmp, dyman01_exp05.dmp, dyman01_exp06.dmp LOGFILE is one. JOURNAL OF THE TABLES = CST_ACTVT TABLE_EXISTS_ACTION = ADD

  
  Any help on how to proceed to another. Cannot find jobs datapump hung in the target database.

  Version of data source and target - 10.2.0.3

  
  Thank you

  
  Sery

  Hello

  According to DBA_DEPENDENCIES (for 11.1 anyway) the dependencies of the table for DBMS_LOCK are DUAL and DBMS_LOCK_ALLOCATED - these two exist?

  I suggest that you get a failure and the rerun catalog and the catproc.

  See you soon,.

  Rich

• Impdp fails with error ORA-39779

  database version: 11.2.0.4.0

  compatible parameter: 11.2.0.0.0

  Sparc 64-bit OS

  Hello guys I am confronted with the error "ORA-39779: type '< schema2 >'". "< type_name >' not found or conversion to the latest version is not possible while import"while trying to import into a target database. "

  Where to I checked all told them to use the transform parameter = oid:n, I've used this setting and I still get the error.

  in a thread, said, maybe it's because users are already created in the database until the import began.

  Someone faced this problem in the past, please help me.

  Thank you

  expdp settings file

  Directory = < directory_name >

  dumpfile = < dumpfile_name > _%U.dmp

  logfile = < logfile_name > .log

  parallel = 8

  compression = all

  schemas = schema1, schema2, schema3

  exclude = grant

  Impdp settings file

  Directory =< < directory_name > >

  dumpfile = <dumpfile_name > _%U.dmp

  logfile = <logfile_name> .log

  parallel = 8

  schemas =schema1, schema2, schema3

  remap_schema =schema1:schema1, schema2:schema2, schema3:schema3

  transform = oid:n

  REMAP_TABLESPACE = < tablespace_1 >: < tablespace_2 >

  Hello guys, this is supported

  Action taken:

  When the schema has been imported, the DDL of the tables are already created.

  I come from a content import = data_only export of the source database for only tables that have failed, then imported again.