Impdp expected TABLE_STATISTICS

Hello

on 11.2.0.4 on Win 2008

I'm out of import (impdp) and it's on

object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS

SQL > select event of session state $ v where program = 'impdp.exe';

EVENT STATE

------------------------- ---------------------------------------------

Wait for the message unread on the pending broadcast channel

Since the ego of 2 hours.

-How to see if it happens?

-If no where to see the problem?

Thank you.

Post pl in Export/Import forum - https://community.oracle.com/community/database/oracle-database-options/export_import_sql_loader_%26_external_tables

Tags: Database

Similar Questions

  • Impdp EXPECTED

    Hello
    on 10 gr 2 I use IMPDP and must wait:

    Impdp DIRECTORY DPUMP_DIR1 TABLE_EXISTS_ACTION = LOGFILE = sysadm/***@MYDB2 = impdp_PRD_DB.log = EXPDP_EXP_9.DMP REPLACE DUMPFILE
    processing object SCHEMA_EXPORT/TABLE/TABLE
    In V$ session:
    SQL> select  state,program from v$session where program like '%impd%';

STATE               PROGRAM
------------------- -------------------------
WAITING             impdp.exe
    How can I see what awaits?
    In the lock of V$ there is no line.

    Thank you.

    have you checked?

    v$ session_longops and v$ datapump_job

  • expdp fails on the mapped network drive

    Hi all

    Win 2008 and Oracle 11.1.0.7, my dump_directory is on a mapped drive, and then it breaks down.

    Any solution for this:

    E:\ > expdp system@DB PATTERNS = USER1 DIRECTORY = DUMPFILE DATA_PUMP_DIR1 = exp_USER1_DB exp_USER1_DB.log = Logfile

    Export: Release 11.1.0.7.0 - 64 bit Production Thursday, November 13, 2014 12:31:31

    Copyright (c) 2003, 2007, Oracle.  All rights reserved.

    Password:

    Connected to: Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    ORA-39002: invalid operation

    ORA-39070: unable to open the log file.

    ORA-29283: invalid file operation

    ORA-06512: at "SYS." UTL_FILE", line 536

    ORA-29283: invalid file operation

    Thank you.

    Post in an appropriate forum pl

    Impdp expected TABLE_STATISTICS

  • Impdp ORA-39083 error: INDEX could not create with object type error:

    Hi Experts,

    I get the following error when importing schema HR after a fall it. The DB is r12.1.3 11.2.0.3 & ebs


    I did export with this command.

    patterns of HR/hr = hr = TEST_DIR dumpfile = HR.dmp logfile directory expdp = expdpHR.log statistics = none

    that the user HR with the option drop waterfall.


    And try to import it HR schemas in the database by the following.

    Impdp System/Manager schemas = hr = TEST_DIR dumpfile = HR.dmp logfile directory = expdpHR.log statistics = none

    Here is the error

    imported 'HR '. "" PQH_SS_PRINT_DATA "0 KB 0 rows

    ... imdoor 'HR '. "" PQH_TJR_SHADOW "0 KB 0 rows

    . . imported 'HR '. "" PQH_TXN_JOB_REQUIREMENTS "0 KB 0 rows

    . . imported 'HR '. "" PQH_WORKSHEET_BUDGET_SETS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQH_WORKSHEET_DETAILS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQH_WORKSHEET_PERIODS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_ALIEN_TRANSACTION_DATA "0 KB 0 rows

    . . imported 'HR '. "" PQP_ANALYZED_ALIEN_DATA "0 KB 0 rows

    . . imported 'HR '. "" PQP_ANALYZED_ALIEN_DETAILS "0 KB 0 rows

    . . imported 'HR '. "" PQP_EXCEPTION_REPORTS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_EXT_CROSS_PERSON_RECORDS "0 KB 0 rows

    . . imported 'HR '. "" PQP_FLXDU_FUNC_ATTRIBUTES "0 KB 0 rows

    . . imported 'HR '. "" PQP_FLXDU_XML_TAGS "0 KB 0 rows

    . . imported 'HR '. "" PQP_GAP_DURATION_SUMMARY "0 KB 0 rows

    . . imported 'HR '. "" PQP_PENSION_TYPES_F_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_SERVICE_HISTORY_PERIODS "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEHICLE_ALLOCATIONS_F_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEHICLE_DETAILS_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEHICLE_REPOSITORY_F_EFC "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEH_ALLOC_EXTRA_INFO "0 KB 0 rows

    . . imported 'HR '. "" PQP_VEH_REPOS_EXTRA_INFO "0 KB 0 rows

    Processing object type SCHEMA_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT

    Processing object type SCHEMA_EXPORT/TABLE/SCHOLARSHIP/CROSS_SCHEMA/OBJECT_GRANT

    Object type SCHEMA_EXPORT/TABLE/COMMENT of treatment

    Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC of treatment

    Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_INDEX/INDEX

    Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/treatment

    Object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_INDEX/INDEX_STATISTICS

    Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY of treatment

    Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment

    Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX

    ORA-39083: Type what INDEX failed to create object error:

    ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE

    ORA-20000: Oracle text error:

    DRG-50857: error oracle in drvxtab.create_index_tables

    ORA-00959: tablespace "APPS_TS_TX_IDX_NEW" does not exist

    Because sql is:

    CREATE INDEXES ' HR'.»» IRC_POSTING_CON_TL_CTX' ON 'HR '. "" INDEXTYPE IRC_POSTING_CONTENTS_TL "("NAME") IS"CTXSYS. "' CONTEXT ' PARALLEL 1

    Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA

    Work 'SYSTEM '. "" SYS_IMPORT_SCHEMA_01 "completed with error (s 1) at 11:16:07

    SQL > select count (parameter), object_type from dba_objects where owner = 'HR' group by object_type.

    OBJECT_TYPE COUNT (OBJECT_NAME)

    ------------------ -------------------

    INDEX 37 PARTITION

    SEQUENCE OF 799

    TABLE 12 PARTITION

    LOB 70

    4 BODY PACKAGE

    PACKAGE OF 4

    3 RELAXATION

    2936 INDEX

    TABLE OF 1306

    Could you please suggest.

    Thank you

    MZ

    MZ,

    I get the following error when importing schema HR after a fall it. The DB is r12.1.3 11.2.0.3 & ebs


    Export and import of individual patterns of Oracle E-Business Suite stocked are not supported as this will violate referential integrity (except for custom schemas provided, you have no dependencies).

    Thank you

    Hussein

  • Impdp table parent key not found error

    I can't import a table into a database of 10.2.0.5 for 11.2.0.3 another. When I imported the first I get 1 error on creating a 1 constraint:

    Impdp tables of lego/password = estact directory = datapump dumpfile = estact.dmp

    Import: Version 11.2.0.3.0 - Production on Wed Apr 2 13:25:22 2014 Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved. Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

    With partitioning, Automatic Storage Management, OLAP, Data Mining

    and Real Application Testing options

    Table main "LEGO". "' SYS_IMPORT_TABLE_01 ' properly load/unloaded

    Departure "LEGO". ' SYS_IMPORT_TABLE_01 ': lego / * tables = directory = datapump dumpfile = estact.dmp estact.

    Object type TABLE_EXPORT/TABLE/TABLE processing object TABLE_EXPORT/TABLE/TABLE_DATA of treatment type

    . . imported "LEGO". "' ESTACT ' 56.01 MB 612972 lines

    Processing object type TABLE_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT

    Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX

    Object type TABLE_EXPORT/TABLE/CONSTRAINT/treatment

    Object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment

    Object type TABLE_EXPORT/TABLE/COMMENT of treatment

    Object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment

    ORA-39083: Type as ref_constraint cannot be created with the object error:

    ORA-02298: cannot validate (LEGO. EstOp_EstAct) - parent key not found

    Because sql is:

    ALTER TABLE 'LEGO '. "' ESTACT ' ADD 'EstOp_EstAct' of CONSTRAINT FOREIGN KEY ('ESTOP_ID')

    REFERENCES "LEGO". "" ESTOP "ENABLE ("ESTOP_ID")

    Object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment

    Working "LEGO". "" SYS_IMPORT_TABLE_01 "completed with error (s 1) at 13:25:28

    Load data however this foreign key is not there then try to create manually after I get this error:

    "ORA-02298: unable to validate (LEGO." EstOp_EstAct) - parent key not found ".

    This source table has 3 foreign key constraints. The one that I'm having a problem setting (above) is a constraint against himself.

    I tried another approach. I exported and imported the metadata only and successfully completed. However when I then exported and imported DATA only, the data will not now with the same error:

    ORA-31693: Table object 'LEGO' data "' ESTACT ' failed to load/unload and being ignored because of the error:

    ORA-29913: error in executing ODCIEXTTABLEFETCH legend

    ORA-02291: integrity constraint (LEGO. EstOp_EstAct) violated - key parent not found

    My question is what I have to do something different when you work with a table with a foreign key against himself constraint?

    Here's the DOF of the source table and 3 foreign keys:

    CREATE THE LEGO TABLE. ESTACT

    (

    ESTOP_ID NUMBER (10,0) NOT NULL,

    OPCLASS_CODE VARCHAR2 (10) NOT NULL,

    ESTACT_FLAG NUMBER (5.0) NOT NULL,

    COSTR_NO_EST NUMBER (5.0) NULL,

    ESTACT_TIME NUMBER (10,0) NULL,

    ESTACT_FIX_COST NUMBER (20.4) NOT NULL,

    ESTACT_VAR_COST NUMBER (20.4) NOT NULL,

    ESTACT_LAB_COST NUMBER (20.4) NOT NULL,

    ESTACT_OEX_COST NUMBER (20.4) NOT NULL,

    ESTACT_TOT_COST NUMBER (20.4) NOT NULL,

    ESTACT_PRI_COST NUMBER (20.4) NOT NULL,

    ESTACT_CM_PRICE NUMBER (20.4) NOT NULL,

    ESTACT_PRI_RATE NUMBER (20.4) NOT NULL,

    ESTACT_IS_PRICE NUMBER (5.0) NOT NULL,

    NUMBER OF ESTACT_BASE_QTY NULL,

    RULE_CODE_BASE_QTY VARCHAR2 (10) NULL,

    ESTACT_NUM_FORMS NUMBER (5.0) NULL,

    ESTACT_FIXMIN NUMBER (10,0) NULL,

    UNIT_CODE_BASE VARCHAR2 (10) NULL,

    UNIT_CODE_INPUT VARCHAR2 (10) NULL,

    ESTACT_AFLAG NUMBER (5.0) NOT NULL,

    NUMBER OF ESTACT_AOPRATE NULL,

    RULE_AOPRATE VARCHAR2 (10) NULL,

    NUMBER OF ESTACT_AWARATE NULL,

    RULE_AWARATE VARCHAR2 (10) NULL,

    NUMBER OF ESTACT_OPRATE NULL,

    NUMBER OF ESTACT_WARATE NULL,

    RULE_CODE_COSTR VARCHAR2 (10) NULL,

    RULE_VAL_COSTR NUMBER (5.0) NULL,

    RULE_CODE_FIXMIN VARCHAR2 (10) NULL,

    CONSTRAINT ESTACT_IDX0

    PRIMARY KEY (ESTOP_ID, OPCLASS_CODE)

    USING INDEX TABLESPACE INDEX

    PCTFREE 10

    INITRANS 2

    MAXTRANS 255

    STORAGE INITIAL (128K

    DEFAULT USER_TABLES)

    ENABLE

    VALIDATE

    )

    BUNCH OF ORGANIZATION

    TABLESPACE USERS

    LOGGING

    PCTFREE 10

    PCTUSED 0

    INITRANS 1

    MAXTRANS 255

    STORAGE (DEFAULT USER_TABLES)

    NOPARALLEL

    NOCACHE

    NOROWDEPENDENCIES

    This is the foreign key DDL. Note the 1 that refers to the same table (the one I'm having a problem with)

    ALTER TABLE LEGO. ESTACT

    ADD CONSTRAINT 'EstOp_EstAct '.

    FOREIGN KEY (ESTOP_ID)

    REFERENCES TO LEGO. ESTOP (ESTOP_ID)

    ENABLE

    VALIDATE

    /

    ALTER TABLE LEGO. ESTACT

    ADD CONSTRAINT 'RuleCodeCost_URULE '.

    FOREIGN KEY (RULE_CODE_COSTR)

    REFERENCES TO LEGO. URULE (URULE_CODE)

    ENABLE

    VALIDATE

    /

    ALTER TABLE LEGO. ESTACT

    ADD CONSTRAINT 'EstActURule_FixMin '.

    FOREIGN KEY (RULE_CODE_FIXMIN)

    REFERENCES TO LEGO. URULE (URULE_CODE)

    ENABLE

    VALIDATE

    /

    Post edited by: karine

    As Galo indicated Balda, your child table (LEGO. ESTACT) has a folder that does not exist in your table parent (LEGO. ESTOP) and this effect is impossible to create the foreign key.

    You can find the recordings by running:

    select estop_id from LEGO.ESTACT -- CHILD TABLE
minus
select estop_id from LEGO.ESTOP -- PARENT TABLE

    AFTER BACK YOU UP YOUR DATA, you need to create the new record in the parent table or remove the child table record in order to comply with the foreign key constraint.

  • Impdp any table

    When I run this command:

    expdp tosandata/tosandata tables = (acact2act) Directory is dumpfile dumpdir is acact2actdmp.dmp

    A dump file and a log file is created with the content of the journal the following:

    ;;;

    Export: Release 11.2.0.1.0 - Production on Mon Dec 16 14:45:53 2013

    Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

    ;;;

    Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    Start "TOSANDATA". "" SYS_EXPORT_TABLE_01 ': tosandata / * tables (acact2act) directory = dumpdir dumpfile = acact2actdmp.dmp

    Current estimation using BLOCKS method...

    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA

    Total estimation using BLOCKS method: 128 KB

    Object type TABLE_EXPORT/TABLE/TABLE processing

    Processing object type TABLE_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT

    Object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment

    . . exported "TOSANDATA." "' ACACT2ACT ' 45.03 lines 1313 KB

    Table main "TOSANDATA." "" SYS_EXPORT_TABLE_01 "properly load/unloaded

    ******************************************************************************

    Empty set of files for TOSANDATA. SYS_EXPORT_TABLE_01 is:

    F:\TOSAN\DATADUMP\ACACT2ACTDMP. DMP

    Work "TOSANDATA". "" SYS_EXPORT_TABLE_01 "conducted at 14:45:57

    When I want to import the dump with the following command file:

    impdp MYTESTUSER / 123456 tables= (acact2act) Directoryis dumpdir dumpfile is acact2actdmp.dmp

    The table does not matter and the following log is generated

    ;;;

    Import: Free 11.2.0.1.0 - Production on Mon Dec 16 14:54:05 2013

    Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

    ;;;

    Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    Table main "MYTESTUSER." "' SYS_IMPORT_TABLE_01 ' properly load/unloaded

    ORA-39166: Object MYTESTUSER. ACACT2ACT was not found.

    Work "MYTESTUSER". "" SYS_IMPORT_TABLE_01 "carried out at 14:54:06

    Work "MYTESTUSER". "" SYS_IMPORT_TABLE_01 "carried out at 14:54:06

    But when I use the following commands:

    exp tosandata/tosandata tables = (acact2act) file =F:\Tosan\DataDump\expdptool.dmp

    imp MYTESTUSER / 123456 tables= (acact2act) file=F:\Tosan\DataDump\expdptool.dmp

    export and import is done properly

    Use the REMAP_SCHEMA clause instead of the parameter TABLES - explanation in the docs

    Data pump import

    Data pump import

    HTH
    Srini

  • Error Impdp/Expdp

    Hello

    Oracle: 10.2.0.3.0

    OS: Windows 7

    I have two files of dump as

    dump14.dmp > > DATA_ONLY

    dump15.dmp > > METADATA_ONLY

    C:\Users\abc > remap_schema system/xyz@TDBIMPDP = dumpfile scott: akk1 = dump15. DMP [error no. all import metadata only]

    Import: Release 10.2.0.3.0 - Production on Tuesday, September 3, 2013, 0:43:27

    Copyright (c) 2003, 2005, Oracle.  All rights reserved.

    Connected to: Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production

    With partitioning, OLAP and Data Mining options

    Main table 'SYSTEM '. "' SYS_IMPORT_FULL_01 ' properly load/unloaded

    Start "SYSTEM". ' SYS_IMPORT_FULL_01 ': system/***@TDB remap_schema = dumpfile scott: akk1 = ".

    dump15. DMP

    Processing object type SCHEMA_EXPORT/USER

    Processing object type SCHEMA_EXPORT/SYSTEM_GRANT

    Processing object type SCHEMA_EXPORT/ROLE_GRANT

    Processing object type SCHEMA_EXPORT/DEFAULT_ROLE

    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA

    Object type SCHEMA_EXPORT/TABLE/TABLE processing

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX

    Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/treatment

    Object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment

    Object type SCHEMA_EXPORT/FUNCTION/treatment

    Object type SCHEMA_EXPORT/PROCEDURE/treatment PROCEDURE

    Object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION of treatment

    ORA-39082: object ALTER_FUNCTION type: 'AKK1. "' PAUSE_FOR_SECS ' created with compilation warning

    s

    Object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE processing

    Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment

    Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment

    Work 'SYSTEM '. "" SYS_IMPORT_FULL_01 "completed with error (s 1) at 00:43:30

    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    C:\Users\abc >IMPDP akk1/xyz@TDB dumpfile = dump14. DMP

    Import: Release 10.2.0.3.0 - Production on Tuesday, September 3, 2013, 0:44:01

    Copyright (c) 2003, 2005, Oracle.  All rights reserved.

    Connected to: Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production

    With partitioning, OLAP and Data Mining options

    Table main "AKK1. "' SYS_IMPORT_FULL_01 ' properly load/unloaded

    Departure "AKK1. "' SYS_IMPORT_FULL_01 ': dumpfile akk1/***@TDB = dump14. DMP

    Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA

    ORA-31693: Table object data 'SCOTT '. "' DEPT ' could not load/unload and being ignored due to

    error:

    ORA-00001: unique constraint (SCOTT. PK_DEPT) violated

    . . imported 'SCOTT '. "" SALGRADE "15 ranks 5,726 KB

    ORA-31693: Table object data 'SCOTT '. "' EMP ' could not load/unload and being ignored due to e

    rror:

    ORA-00001: unique constraint (SCOTT. PK_EMP) violated

    . . imported 'SCOTT '. "" SQL_TRACE_TEST "5,351 KB 5 rows

    . . imported 'SCOTT '. "" BONUS "0Ko 0 rows

    Work 'AKK1. "' SYS_IMPORT_FULL_01 ' completed by 2 error (s) at 00:44:03

    Why I get unique constraint violation error.

    -----------------------------------------------------------------------------------------------------------------------------------

    But when I use

    C:\Users\abc > remap_schema system/xyz@TDB = dumpfile scott IMPDP: akk1 = dump14. DMP

    There is no error.

    Hello

    the fact that you connect to IMPDP AKK1 wants not to say that the import will be in the schema AKK1. Unless you remap the schema explicitly, importation is made as is, that is to say SCOTT. DEPT will go to the SCOTT schema.

    Best regards

    Nikolai

  • 'Impdp' is blocked?

    Hello

    Env: Oracle 10 g 2 (10.2.0.5)

    OS: RHEL 5.8 64-bit

    I started the work of "impdp" about 17:40 yesterday as follows:

    nohup impdp ID/'PWD'@DIS DIRECTORY parallel = dp_dump_dir = 6 DUMPFILE=EXPORT_%U.DMP NOLOGFILE = Y schema [schema list] = > /dbexports/exports/IMP.log &

    And here is the last line of the file "log":

    Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX

    If I check the process impdp at the OS level, I see a running process:

    Oracle 8583 12121 0 10:12 pts/3 00:00:00 grep impdp

    Oracle 16932 12121 Aou08 0 pts/3 00:00:00 impdp DIRECTORY = data_pump_dir parallel = 6 DUMPFILE =...

    When I ask the database, I see this:

    Select * from dba_datapump_jobs;

    OWNER_NAMEJOB_NAMEOPERATIONJOB_MODESTATEDEGREEATTACHED_SESSIONSDATAPUMP_SESSIONS
    SYSTEMSYS_IMPORT_SCHEMA_01IMPORTSCHEMAEXECUTION OF618

    Its been like 17 + I started this import. Here are the files imported by impdp work:

    -rw - r - 1 oracle bCheminAdmin 50482532352 7 August 13:07 EXPORT_01.DMP

    -rw - r - 1 oracle bCheminAdmin 34717945856 7 August 13:14 EXPORT_02.DMP

    -rw - r - 1 oracle bCheminAdmin 28557950976 7 August 13:19 EXPORT_03.DMP

    -rw - r - 1 oracle bCheminAdmin 36996407296 7 Aug 13:27 EXPORT_04.DMP

    -rw - r - 1 oracle bCheminAdmin 37514956800 7 August 13:34 EXPORT_05.DMP

    -rw - r - 1 oracle bCheminAdmin 30535053312 7 August 13:39 EXPORT_06.DMP

    I know that the files are big. One of the imported tables contains some LOBs and the table is big enough.

    Is there anything that should / can check to make sure that 'impdp' is still running and does not expect something?

    Can I check what exactly the "impdp" do / done right now?

    Please advise!

    Best regards

    Message was edited by: user130038

    My other post was not a duplicate, but I posted another question concerning impdp suspension/resumption of employment. As the impdp job runs in the background, how can I suspend and resume later?

    Are there errors in the database alert log? This may indicate a corruption LOB - pl run scripts in MOS Doc 787004.1 to check

    HTH
    Srini

  • Oracle 11 g Express Edition 11.2.0.0 not supported the impdp utility?

    Hello

    We strive to import a dump Oracle Express Edition, without success. We got the error message: ORA-39213: metadata processing is not available.

    (A) source database: database Oracle 11 g Enterprise Edition Release 11.1.0.7.0
    (B) target database: database Oracle 11 g Express Edition Release 11.2.0.2.0

    You are looking for a solution has led us to the following forum entries:

    1 http://kmpdba.wordpress.com/2012/05/02/ora-39213-metadata-processing-is-not-available/ Cause: package DBMS_METADATA_UTIL does not run successfully. Solution: install (among others) SQL > @$ORACLE_HOME/javavm/install/initjvm.sql
    2. purpose: there is no scrript of @$ORACLE_HOME/javavm/install/initjvm.sql--> http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html--> Oracle 11 g EX does not support java

    Issues related to the:

    (a) does support Oracle 11 g EX impdp utility at all?
    (b) how it would be possible to import the dump mentioned above in (A) in (B)?

    Thanks in advance,

    Michel

    Hello
    It seems ike datapump has somehow been corrupted somehow. You can recharge at 11.2 by running:

    @?/rdbms/admin/catproc.sql as SYS (connections to is arrested all get it first).

    Then try again.

    I don't really use XE, but I don't see why datapump doesn't work - some function/feature can be turned off, but the main feature is expected to be there.

    Agress,
    Harry

  • IMPDP SQLFILE: constraint_name multibyte characters leads to ORA-00972

    Hello

    I'm actually constraint_name made of multibyte characters (for example: constrain_name = "VALIDA_CONFIRMAÇÃO_PREÇO13").
    Of course this Bad Idea® is hereditary (I'm against all the stuff of fantasy as water in the names of files or directories on my filesystem...)

    The scenario is as follows:
    0 - I'm supposed to do a 'remap_schema '. Everything in the schema SCOTT should now be in a schema NEW_SCOTT.
    1 - the scott schema is exported via datapump
    2 - I'm an impdp with SQLFILE to remove all the DDL (table, packages, synonyms, etc...)
    3. I do a few sed on the sqlfile generated to replace each occurrence of SCOTT at NEW_SCOTT (this part is OK)
    4. once the modified sqlfile is executed, I'm doing an impdp with DATA_ONLY.

    (The scenario was envisioned in this thread: {message identifier: = 10628419})

    I get a few ORA-00972: identifier is too long to step 4, when you run the sqlfile.
    I see that some DDL for creating the constraint in the file (generated in step # 2) is read as follows:
    ALTER TABLE "TW_PRI"."B_TRANSC" ADD CONSTRAINT "VALIDA_CONFIRMAÃÃO_PREÃO14" CHECK ...
    Of course, the original name of the constraint with the cedilla and the tilde translates to something that is longer than 30 char/byte...

    As the original name is the Brazil, I also tried to add an EXPORT LANG = pt_BR. UTF-8 in my script before you run the impdp for sqlfile. It doesn't change anything. (the original $LANG is en_US. UTF-8)

    To create a unit test for this thread, I tried to reproduce it on my sandbox database... but, I don't have the issue. :-(

    The real system is a database of 4-nodes on Exadata (11.2.0.3) with NLS_CHARACTERSET = AL32UTF8.
    My sandbox database is a 11.2.0.1 (nonRAC) on RHEL4 AL32UTF8 also.

    The constraint_name argument is the same on the two system: I checked byte by byte using DUMP() on the constraint_name argument.

    Feel free to make light and/or seek clarification if necessary.


    Thanks in advance for those who will take their time to read all this.
    :-)

    --------
    I decided to register my testcase to my sandbox database, even if it does NOT reproduce the issue + (maybe I'm missing something obvious...) +.

    I use the following files.
    -createTable.sql:
    $ cat createTable.sql 
drop table test purge;

create table test
(id integer,
val varchar2(30));

alter table test add constraint VALIDA_CONFIRMAÇÃO_PREÇO13 check (id<=10000000000);

select constraint_name, lengthb(constraint_name) lb, lengthc(constraint_name) lc, dump(constraint_name) dmp
from user_constraints where table_name='TEST';
    -expdpTest.sh:
    $ cat expdpTest.sh 
expdp scott/tiger directory=scottdir dumpfile=testNonAscii.dmp tables=test
    -impdpTest.sh:
    $ cat impdpTest.sh 
impdp scott/tiger directory=scottdir dumpfile=testNonAscii.dmp sqlfile=scottdir:test.sqlfile.sql tables=test
    It comes to the race:
    [oracle@Nicosa-oel test_nonAsciiColName]$ sqlplus scott/tiger

SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 12 18:58:27 2013

Copyright (c) 1982, 2009, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> @createTable

Table dropped.


Table created.


Table altered.


CONSTRAINT_NAME                  LB       LC
------------------------------ ---------- ----------
DMP
--------------------------------------------------------------------------------
VALIDA_CONFIRMAÇÃO_PREÇO13             29         26
Typ=1 Len=29: 86,65,76,73,68,65,95,67,79,78,70,73,82,77,65,195,135,195,131,79,95
,80,82,69,195,135,79,49,51


SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@Nicosa-oel test_nonAsciiColName]$ ./expdpTest.sh 

Export: Release 11.2.0.1.0 - Production on Tue Feb 12 19:00:12 2013

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SCOTT"."SYS_EXPORT_TABLE_01":  scott/******** directory=scottdir dumpfile=testNonAscii.dmp tables=test 
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 0 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
. . exported "SCOTT"."TEST"                                  0 KB       0 rows
Master table "SCOTT"."SYS_EXPORT_TABLE_01" successfully loaded/unloaded
******************************************************************************
Dump file set for SCOTT.SYS_EXPORT_TABLE_01 is:
  /home/oracle/scott_dir/testNonAscii.dmp
Job "SCOTT"."SYS_EXPORT_TABLE_01" successfully completed at 19:00:22

[oracle@Nicosa-oel test_nonAsciiColName]$ ./impdpTest.sh 

Import: Release 11.2.0.1.0 - Production on Tue Feb 12 19:00:26 2013

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SCOTT"."SYS_SQL_FILE_TABLE_01" successfully loaded/unloaded
Starting "SCOTT"."SYS_SQL_FILE_TABLE_01":  scott/******** directory=scottdir dumpfile=testNonAscii.dmp sqlfile=scottdir:test.sqlfile.sql tables=test 
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Job "SCOTT"."SYS_SQL_FILE_TABLE_01" successfully completed at 19:00:32

[oracle@Nicosa-oel test_nonAsciiColName]$ cat scott_dir/test.sqlfile.sql 
-- CONNECT SCOTT
ALTER SESSION SET EVENTS '10150 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10904 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '25475 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10407 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10851 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '22830 TRACE NAME CONTEXT FOREVER, LEVEL 192 ';
-- new object type path: TABLE_EXPORT/TABLE/TABLE
CREATE TABLE "SCOTT"."TEST" 
   (     "ID" NUMBER(*,0), 
     "VAL" VARCHAR2(30 BYTE)
   ) SEGMENT CREATION DEFERRED 
  PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 COMPRESS FOR OLTP LOGGING
  TABLESPACE "MYTBSCOMP" ;
 
-- new object type path: TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
ALTER TABLE "SCOTT"."TEST" ADD CONSTRAINT "VALIDA_CONFIRMAÇÃO_PREÇO13" CHECK (id<=10000000000) ENABLE;
    I was expecting the cedilla and the tilde characters not displayed correctly...

    Published by: Nicosa on February 12, 2013 19:13

    Hello
    I had some strange effects if I didn't set the translation be utf8 in my ssh client (PuTTY in my case). Is - this somehow something that automatically happens in an environment, but not the other?

    In putty, this is the window-> translation and then choose utf8

    Also make sure that's not sed plague rather than impdp?

    See you soon,.
    Harry

  • With the help of expdp/impdp in pump data

    Hi all

    I am newbie in oracle database through the use of data import and export oracle data pump. I use Oracle 10 g 2 on Windows 7

    After you create the directory object 'test_dir' and the granting of read, write privilege to user scott, I connect like scott to the database and create the table 'test' with two rows.

    Then I run expdp command prompt as follows:

    C:\users\administrator > expdp scott/tiger@orcl tables = happy test = all = TEST_DIR dumpfile = test.dmp expdp_test.log = logfile directory

    Export: Release 10.2.0.3.0 - Production on Monday, June 13, 2011 20:20:54

    Copyright (c) 2003, 2005, Oracle. All rights reserved.

    Connected to: Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - production
    tion
    With partitioning, OLAP and Data Mining options
    Departure 'SCOTT '. "SYS_EXPORT_TABLE_01": scott/***@orcl tables = test content.
    = all = TEST_DIR dumpfile = test.dmp expdp_test.log = logfile directory
    Current estimation using BLOCKS method...
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    Total estimation using BLOCKS method: 0 KB
    Object type TABLE_EXPORT/TABLE/TABLE processing
    . . "exported"SCOTT" TEST' 0Ko 0 rows
    Table main 'SCOTT '. "" SYS_EXPORT_TABLE_01 "properly load/unloaded
    ******************************************************************************
    Empty the files together for SCOTT. SYS_EXPORT_TABLE_01 is:
    D:\DAMP\TEST. DMP
    Job 'SCOTT '. "" SYS_EXPORT_TABLE_01 "conducted at 20:21:02

    My question is why data pump seem to export the table 'test' without lines (that is to say the line: exported 'SCOTT'.) ("' TEST ' 0Ko 0 lines)? How can I do it with the associated export lines?


    I dropped the table test, then I ran the command impdp as follows:

    C:\users\administrator > impdp scott/tiger tables = content test = all = TEST_DIR dumpfile = Test.dmp impdp_test.log = logfile directory

    Import: Release 10.2.0.3.0 - Production on Monday, June 13, 2011 20:23:18

    Copyright (c) 2003, 2005, Oracle. All rights reserved.

    Connected to: Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - production
    tion
    With partitioning, OLAP and Data Mining options
    Table main 'SCOTT '. "' SYS_IMPORT_TABLE_01 ' properly load/unloaded
    Departure 'SCOTT '. "" SYS_IMPORT_TABLE_01 ": scott / * tables = happy test = all
    Directory = TEST_DIR dumpfile = Test.dmp logfile = impdp_test.log
    Object type TABLE_EXPORT/TABLE/TABLE processing
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported 'SCOTT '. "' TEST ' 0Ko 0 rows
    Job 'SCOTT '. "" SYS_IMPORT_TABLE_01 "carried out at 20:23:21


    Then, after selection * test. No rows returned

    Please someone with an idea to this topic... What I expected after operation data in table view pump it could export and import table with the data if I'm not mistaken.

    Concerning
    Sadik

    Sadik says:
    He had two rows

    Export is disagreeing with you.
    have you COMMITTED after INSERT & before export?

  • Is there a self-cleaning of the TABLEs not referenced after surgery impdp?

    Assume the following sequence of operations:

    (1.) I export a complete database with expdp in a dumpfile
    2.) I create a new TABLE "mytab" (resp. more generally a object). References/entries in this table will be added to a couple of tables system "all_tables", "dba_tab_privs" and others.
    3.) now I import the previously exported dumpfile to return in the original database with parameter
    TABLE_EXISTS_ACTION = REPLACE FULL = Y

    This operation would replace the table "all_tables' (resp. the table behind this point of view system).
    The reference to "mytab" is getting lost. This is similar to an object that is not referenced in C++ (which must be released) or an object not referenced in Java that is removed by the garbage collector.

    How such an orphaned table/object is managed in Oracle?

    Is there a!-up or a warning?

    Peter

    If you create a table after you export and an import complete export the table you created after that export has been carried out, mytable in your example, should not be affected by import. RDBMS database tables are not superimposed my full import rather the DDL created as part of the export updates base tables.

    Where the table exists the create table in dmp file errors out and impdp (or imp) just ignores the error and continues to stage data loading. The stage of loading data capture and does not take into account continuous duplicate key errors to try to insert data until there is no more to this table, then he goes to try to create the index for the table.

    At least that's how exp/imp has worked and I have not noticed any behavior change with expdp/impdp, although I haven't used utilities heavily again.

    HTH - Mark D Powell.

    Note: the above applies when you import in the db of the source, and not another where you expect changes once the dmp file was made to not be present in the default behavior for a full import to do not destroy the existing database and re-create dmp file. To re-create the tablespaces was the default behavior with version 6.

    Edited by: Mark D Powell on March 18, 2010 06:20

  • Full expdp and impdp: one db to another

    Hello! Nice day!

    I would like to ask for any help with my problem.

    I would like to create a full database export and import them to a different database. This data base 2 are on separate computers.
    I try to use the expdp and impdp tool for this task. However, I experienced some problems during the import task.

    Here are the details of my problems:

    When I try to impdp the dump file, it seems that I was not able to import data and metadata to the user.

    Here is the exact command that I used during the import and export of task:

    Export (Server n ° 1)

    expdp user01 / * directory = ora3_dir full = y dumpfile=db_full%U.dmp filesize = parallel 2 logfile = db_full.log G = 4

    import (Server #2)
    Impdp user01 / * directory = ora3_dir dumpfile=db_full%U.dmp full = y log = db_full.log sqlfile = db_full.sql estimate = parallel blocks = 4

    Here is the log that was generated during the impdp runs:

    ;;;
    Import: Release 10.2.0.1.0 - 64 bit Production on Friday, 27 November 2009 17:41:07

    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    ;;;
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
    With partitioning, OLAP and Data Mining options
    Table main "PGDS. "' SYS_SQL_FILE_FULL_01 ' properly load/unloaded
    Departure "PGDS. ' SYS_SQL_FILE_FULL_01 ': PGDS / * directory = ora3_dir dumpfile=ssmpdb_full%U.dmp full = y logfile = ssmpdb_full.log sqlfile = ssmpdb_full.sql.
    Object DATABASE_EXPORT/TABLESPACE of treatment type
    Type of object DATABASE_EXPORT/PROFILE of treatment
    Treatment of DATABASE_EXPORT/SYS_USER/USER object type
    Treatment of DATABASE_EXPORT/SCHEMA/USER object type
    Type of object DATABASE_EXPORT/ROLE of treatment
    Treatment of type of object DATABASE_EXPORT, GRANT, SYSTEM_GRANT, PROC_SYSTEM_GRANT
    DATABASE_EXPORT/SCHEMA/SCHOLARSHIP/SYSTEM_GRANT processing object type
    DATABASE_EXPORT/SCHEMA/ROLE_GRANT processing object type
    DATABASE_EXPORT/SCHEMA/DEFAULT_ROLE processing object type
    DATABASE_EXPORT/SCHEMA/TABLESPACE_QUOTA processing object type
    DATABASE_EXPORT/RESOURCE_COST processing object type
    Treatment of DATABASE_EXPORT/SCHEMA/DB_LINK object type
    DATABASE_EXPORT/TRUSTED_DB_LINK processing object type
    DATABASE_EXPORT/PATTERN/SEQUENCE/SEQUENCE processing object type
    Treatment of type of object DATABASE_EXPORT/PATTERN/SEQUENCE/EXCHANGE/OWNER_GRANT/OBJECT_GRANT
    DATABASE_EXPORT/DIRECTORY/DIRECTORY of processing object type
    Treatment of type of object DATABASE_EXPORT/DIRECTORY/EXCHANGE/OWNER_GRANT/OBJECT_GRANT
    Treatment of type of object DATABASE_EXPORT/DIRECTORY/EXCHANGE/CROSS_SCHEMA/OBJECT_GRANT
    Type of object DATABASE_EXPORT/CONTEXT of transformation
    Object DATABASE_EXPORT/SCHEMA/PUBLIC_SYNONYM/SYNONYM of treatment type
    Object DATABASE_EXPORT/SCHEMA/SYNONYM of treatment type
    DATABASE_EXPORT/SCHEMA/TYPE/TYPE_SPEC processing object type
    Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, PRE_SYSTEM_ACTIONS, PROCACT_SYSTEM
    Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, POST_SYSTEM_ACTIONS, PROCACT_SYSTEM
    DATABASE_EXPORT/SCHEMA/PROCACT_SCHEMA processing object type
    DATABASE_EXPORT/SCHEMA/TABLE/TABLE processing object type
    Treatment of type of object DATABASE_EXPORT, SCHEMA, TABLE, PRE_TABLE_ACTION
    Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
    Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/SCHOLARSHIP/CROSS_SCHEMA/OBJECT_GRANT
    Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/INDEX/INDEX
    DATABASE_EXPORT/SCHEMA/TABLE/CONSTRAINT processing object type
    Object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment
    DATABASE_EXPORT/SCHEMA/TABLE/COMMENT processing object type
    DATABASE_EXPORT/SCHEMA/PACKAGE/PACKAGE_SPEC processing object type
    Treatment of type of object DATABASE_EXPORT/SCHEMA/PACKAGE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
    DATABASE_EXPORT/SCHEMA/FEATURE/FUNCTION processing object type
    Treatment of type of object DATABASE_EXPORT/SCHEMA/FUNCTION/GRANT/OWNER_GRANT/OBJECT_GRANT
    DATABASE_EXPORT/DIAGRAM/PROCEDURE/PROCEDURE processing object type
    Treatment of type of object DATABASE_EXPORT/DIAGRAM/PROCEDURE/GRANT/OWNER_GRANT/OBJECT_GRANT
    DATABASE_EXPORT/SCHEMA/FUNCTION/ALTER_FUNCTION processing object type
    DATABASE_EXPORT/DIAGRAM/PROCEDURE/ALTER_PROCEDURE processing object type
    DATABASE_EXPORT/SCHEMA/VIEW/VIEW processing object type
    Treatment of type of object DATABASE_EXPORT/SCHEMA/VIEW/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
    Treatment of type of object DATABASE_EXPORT/SCHEMA/VIEW/SCHOLARSHIP/CROSS_SCHEMA/OBJECT_GRANT
    DATABASE_EXPORT/SCHEMA/VIEW/COMMENT processing object type
    Type of object DATABASE_EXPORT/SCHEMA/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment
    Type of object DATABASE_EXPORT/SCHEMA/PACKAGE_BODIES/PACKAGE/PACKAGE_BODY of treatment
    DATABASE_EXPORT/SCHEMA/TYPE/TYPE_BODY processing object type
    Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
    Treatment of object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
    Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/STATISTICS/TABLE_STATISTICS.
    Treatment of type of object DATABASE_EXPORT, SCHEMA, TABLE, POST_TABLE_ACTION
    DATABASE_EXPORT/SCHEMA/TABLE/TRIGGER processing object type
    DATABASE_EXPORT/SCHEMA/VIEW/TRIGGER processing object type
    Treatment of object DATABASE_EXPORT/PATTERN/JOB type
    Object DATABASE_EXPORT/SCHEMA/DIMENSION of treatment type
    Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/POST_INSTANCE/PROCACT_INSTANCE
    Treatment of type of object DATABASE_EXPORT/SCHEMA/TABLE/POST_INSTANCE/PROCDEPOBJ
    Treatment of type of object DATABASE_EXPORT, DIAGRAM, POST_SCHEMA, PROCOBJ
    Treatment of type of object DATABASE_EXPORT, DIAGRAM, POST_SCHEMA, PROCACT_SCHEMA
    Job 'PGDS. "" SYS_SQL_FILE_FULL_01 "led to 17:43:09

    Thank you in advance.

    The good news is that your dumpfile seems fine. It has metadata and data.

    I looked through your impdp command and found your problem. You have added the sqlfile parameter. This indicates datapump to create a file that can be run from sqlplus. In fact, it is not objects. It also excludes data because data could get pretty ugly in a sqlfile.

    Here's your impdp command:

    Impdp user01 / * directory = ora3_dir dumpfile=db_full%U.dmp full = y log = db_full.log sqlfile = db_full.sql...

    Just remove the

    sqlFile = db_full. SQL

    After you run your first job, you will have a file named db_full.sql that has all the inside create statements. After you remove the sqlfile parameter, your import will work.

    Dean

  • How to put my settings file to run impdp correctly?

    Hi all

    I want to import a table HR. KATE COUNTRY: COUNTRIES with impdp

    It's my parameter file:


    DIRECTORY = C_ROOT
    DUMPFILE = EXAMPLE. DMP
    TABLES = COUNTRY
    REMAP_SCHEMA = SH: KATE


    I get an error in my log file:

    ;;;
    Import: Release 10.2.0.1.0 - Production on Thursday, October 16, 2008 08:36:12

    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    ;;;
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With partitioning, OLAP and Data Mining options
    Table main "SYSMAN." "' SYS_IMPORT_TABLE_01 ' properly load/unloaded
    Departure "SYSMAN." "' SYS_IMPORT_TABLE_01 ': sysman / * parfile = impdb.par
    Object type TABLE_EXPORT/TABLE/TABLE processing
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported 'HR '. "" COUNTRIES "25 lines 6.093 KB
    . . imported "KATE." "" COUNTRIES "23 ranks 9,273 KB
    Processing object type TABLE_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
    Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
    Object type TABLE_EXPORT/TABLE/CONSTRAINT/treatment
    Object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment
    Object type TABLE_EXPORT/TABLE/COMMENT of treatment
    Object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment
    ORA-39083: Type as ref_constraint cannot be created with the object error:
    ORA-00942: table or view does not exist
    Because sql is:
    ALTER TABLE 'HR '. "' COUNTRY ' ADD CONSTRAINT 'COUNTR_REG_FK' FOREIGN KEY ('REGION_ID') REFERENCES 'HR '. "" ALLOW THE REGIONS ' ('REGION_ID")
    Object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment
    Work "SYSMAN." "" SYS_IMPORT_TABLE_01 "completed with error (s 1) at 08:38:40



    Finally, I had two country import: in the two schema HR and KATE.

    Can someone help me please?


    I only want to import human resources. Country of KATE. Country.

    Thanks in advance.

    : o).

    Note: 260225.1- Import DataPump parameter REMAP_SCHEMA - how to move objects from one schema to another database

    Note: 341733.1 -Import/Export DataPump parameters INCLUDE and exclude - how to load and unload objects

  • Have not dated my series 1 to 3.0 where is features I expect it?

    Have not dated my series 1 to 3.0 where is features I expect it? One was to be able to call 911 in an emergency. The other shared the fitness goals with my wife who has my old Striv Bio, which also shares the friend's progress. I'm not either of those features on my watch. They are only for the 2 series watch?

    Hello

    With the help of SOS (911) here > https://help.apple.com/watch/#/apd4ea933124

    And for sharing fitness activities > https://help.apple.com/watch/#/apd68a69f5c7

Maybe you are looking for

  • Re: update type Intel Management Engine Interface

    Simply receive uprgade notes... * heci - 20150320101654.zip *.Data di ultima changes 20/03/15Ragione social IntelType Intel Management Engine Interface Whatever it is, what to do? It is necessary? It is safe?Thank youGiovanni

  • Help with Private Disk

    I just rebuilt my Thinkpad and you run all updates, but when I try to mount my private drive files I can't find the software it comes preinstalled with the system and I have a bunch of imporant in there but I can't find the software to mount, I have

  • 8600 more duplex in Word format - no option shows

    I bought this printer for duplex printing, but when I go to print a Word document on my iMac (last version of Word for Mac) and the latest Mac operating system, there is no option for double-sided printing. However, when I looked online for the 8600

  • CS6 Question w/save for Web, do not use the Document DPI

    I'm creating an Action where I take a document large PSD format (photography) and change the size of the image at 72 DPI and 1000 pixels on the long side of the photo. If the action flattens the image and then modified the image 72 DPI and 1000 pixel

  • update of lightroom 6.0. to 6.3

    Unfortunately, I can't spend 6.0. to 6.3. This is the message that I get... tried 3 timesUpdate of Lightroom CC/6-November 2015Update is not applicable. Error code: U44M2P28