Implement MLAG with a single switch running

Similar Questions

• My iPhone6s pairs with ONE single device (phone link2cell). will pair with something else, and "bicycle wheel" changes all the time! Any suggestions?

  My iPhone6s pairs with ONE single device (phone link2cell). will pair with something else. At the opening of the Bluetooth window "bicycle wheel" next to "Other devices" is always running as if the search! Any suggestions?

  When you open the Bluetooth section in the settings, you can still see the spinning wheel, because it is in discovery mode and is actually looking for other devices in the range. Other devices must be in discovery/torque for the device mode to find them. However, I'm not sure you can be associated with multiple devices at the same time with the iPhone. You can have multiple devices matched on the phone, but you can always not more than one partner at the same time. It depends on what it is you are trying to pair.

• Link-5 is compatible with USB KVM switches?

  Is it possible to control two computers using a 5-link connected keyboard and mouse via a KVM switch USB?

  Yes.  I found if I ensure that my KVM systems aren't on the lock screen and plug the receiver into the keyboard (if specified) port and the system recognizes the keyboard and the mouse.  I use a HP 4500 mouse and keyboard of Elite v2 with a single Link-5 receiver and it works with a Ultra 2 port KVM switch.  In any case I hope THST help.

• Laptop Acer with a single disc DVD - RW not recognised in Win Vista

  DVD drive has disappeared, but I see still physically!

  The machine is an Acer laptop with a single disc DVD - RW Win Vista Home Premium 32 running with all the latest updates installed.

  Any ideas?

  I noticed a few other posts which look similar to mine, but had trouble understanding if they truly are or not.  So apologies if this is a repeat of something already posted.

  3 running the Microsoft Fixit tool, it seems to point out that there is a problem and said fixed it, but nothing is actually fixed by that

  2 - installing all IDE channels and let the system reinstall after re-booting

  1. detection of new hardware in Device Manager

  So far, I have tried.

  I know that the drive itself works well because when I initially turn on the laptop I can hear the drive spin upward and I'm able to eject the drawer, so there the power etc... but once in Windows the drive does not work or even appear anywhere.

  Event 11 atapi - driver has detected an error on \Device\Ide\IdePort0 controller.

  Event 9 atapi - the device, \Device\Ide\IdePort0, did not within the time limit.

  Event 11 atapi - driver detected an error in the controller on \Device\Ide\IdePort2.

  and...

  CDROM

  Event 7026 - the next (s) starting or starting system could not load:

  While they inspected the system event logs there is a chain of...

  I have not installed anything new (software or hardware), I know.

  The other day the player just stopped working and is no longer registered to each workstation or in the Device Manager list.

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Using Easy Transfer of Win 7 PC to another Win 7 PC with 1 single monitor

  II want to transfer files and settings on a PC running Windows 7 SP1 to another PC running the same operating system. I have only 1 monitor. How to make the transfer with 1 single monitor?  If I can do it with 1 monitor PC must be connected to the monitor? Or what I have to go back between the 2 PC's? Thank you. (Stupid question, I guess, but I need some advice).

  Hi Harry,.

  Yes, you can use a system image to transfer the data.

  However, Windows Easy Transfer is a software assistant to transfer files and settings from one computer running Windows to another. You can transfer data from one user or multiple user accounts profile. Easy transfer Windows application will help you choose what to move to your new computer, you can set the transfer method to use and then performs the transfer. Once the transfer is done, Windows easy transfer reports displays what was transferred and provides a list of programs that you can install on your new computer, as well as links to other programs you can download.

  With Windows Easy Transfer, files and settings can be transferred using a network, a flashdrive USB (UFD), or the easy transfer cable. However, you cannot use a regular universal serial (USB) bus cable to transfer files and settings using Windows Easy Transfer. You can buy a cable to transfer files on the Web, the manufacturer of your computer, or at an electronics store.
  noteNote
  You can't use Windows Easy Transfer to move program files. Windows Easy Transfer can move only data and program settings. You must then install your software on the new computer.

  Windows Easy Transfer, also, does not transfer any system files such as fonts and drivers. To do this, you must install custom and updated fonts to update drivers in Windows 7.

  Use the Microsoft Windows User State Migration Tool (USMT) 4.0 to automate migration during large deployments of the Windows 7 operating system. For more information about the USMT, see the User State Migration Tool 4.0 (usmt.chm) Help documentation installed with the Windows AIK, or see this Microsoft Web site.
  Prepare for migration on the destination computer

  To start Windows easy transfer on the destination computer, follow these steps:

  1. close all active programs.

  2. click on start, click principally made programs, accessories, click System Tools, and then click Windows Easy Transfer.

  The Windows Easy Transfer window opens.

  3. click on next.

  4. Select the method to use to transfer files and settings from your old computer.

  5. click on this is my new computer.

  6. click on that I need to install it now.

  7. Select the destination media on which you want to store the Windows Easy Transfer Wizard files. You can store the files to an external hard drive or a network drive Wizard, or you can store it on a USB key.

  A browse to folder window opens.

  8. type a path and a folder name in which you want to store the Windows Easy Transfer Wizard files, and then click Next.

  You must now start your old computer to install Windows Easy Transfer.
  Migrate files and settings from the Source computer to the Destination computer

  Choose one of the three following methods to migrate files and settings:

  * Method 1: Transfer files and settings using a USB cable

  * Method 2: Transfer files and settings using a network

  * Method 3: Transfer files and settings using removable media or a network share

  Method 1: Transfer files and settings using a USB cable

  1 connect the two computers with a USB cable, as for example the Windows Easy Transfer cable, and install the drivers for that cable.

  2. start Windows Easy Transfer on the computer from which you want to migrate settings and files by browsing to the removable media or network drive containing the wizard files, and then double click on migsetup.exe. The program can also start automatically when you insert the removable media.

  Method 2: Transfer files and settings using a network

  1. start Windows Easy Transfer on the computer from which you want to migrate settings and files by browsing to the removable media or network drive containing the wizard files, and then double click on migestup.exe. The program can also start automatically when you insert the removable media.

  2. click on next.

  3. click on a network.

  noteNote
  Both computers must support the transfer method you choose. For example, the two computers must be connected to the same network.

  4. click on this is my old computer.

  5. follow the steps to enter the key of Windows Easy Transfer on your new computer to allow network connection.

  6. on your new computer, after entering the Windows Easy Transfer key, click Next.

  A connection is established and Windows Easy Transfer checks the updates and compatibility.

  Click transfer to transfer all files and settings. You can also determine which files should be migrated by selecting only the user profiles that you want to transfer, or by clicking Customize.

  7. click close once Windows Easy Transfer has completed migrating files and settings to the destination computer.

  Method 3: Transfer files and settings using removable media or a network share
  Copy the files from the source computer

  1. start Windows Easy Transfer on the computer from which you want to migrate settings and files by browsing to the removable media or network drive containing the wizard files, and then double click on migsetup.exe.

  2. click on next.

  3. click on an external hard drive or USB key.

  noteNote
  Both computers must support the transfer method you choose. For example, both computers must be supported the same type of removable media.

  4. click on this is my old computer. Windows Easy Transfer scans the computer.

  5. click on next. You can also determine which files should be migrated by selecting only the user profiles that you want to transfer, or by clicking Customize.

  6. enter a password to protect your file transfer file, or leave the box blank, and then click Save.

  7. navigate to the location on the network or removable media where you want to save your easy transfer file, and then click Save.

  8. click Next. Windows Easy Transfer displays the file name and location of the file Easy Transfer that you just created.

  Copy files to the destination computer

  1. connect the removable media to the new computer.

  2. start Windows Easy Transfer and then click Next.

  3. click on an external hard drive or USB key.

  4. click on this is my new computer.

  5. click Yes, open the file.

  6. navigate to the location where the transfer file was saved. Click on the name of the file and then click Open.

  7. click transfer to transfer all files and settings. You can also determine which files should be migrated by selecting only the user profiles that you want to transfer, or by clicking Customize.

  8. click close once Windows Easy Transfer completed moving your files.

  Additional information:

  Transfer files and settings from another computer

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Disable the automatic connection for Windows 7 with 1 single active account.

  I've searched high and low on Google but all I could find are methods to allow the automatic connection.

  Is it possible to have Windows 7 load to the top of the selection of Auditors even screen with 1 single active account?

  I remember what is a function available in XP.

  There are probably more simple methods, but it certainly works: create a fake account, then bring it to be hidden from the logon screen. The following batch file will do it for you when it is run under elevated privileges. Of course, you must disable the usual automatic connection setting via this command:

  Control userpasswords2

  And here's the batch file. Use the copy & paste - do not retype! Note that the line starting with
  "echo > % RegFile" is a very long line that ends in 'UserList]. " Not to break upward.

  off @echo
  Set RegFile="%temp%\reg.reg".
  echo > RegFile % REGEDIT4
  echo > RegFile % [HKey_Local_Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList]
  echo > RegFile % "DummyUser" = DWORD: 00000000
  Regedit RegFile %
  NET user DummyUser supercalifrag / add

• Tool to highlight in different colors on a base with a single click

  Concerns Acrobat Pro ms in the latest version on a Mac. I'm looking for a way to have the highlight tool (sorry, only a German version - it's the tool with the yellow pen, which allows to highlight the words) in the comment section available in various colors on a base with a single click. Of course one can with the colors in the Panel property of the highlighting itself, but it's pretty heavy. It is possible to put the tool in a toolbar customized, yet, the color of a single instance of the switching tool will change it in all cases. Any suggestions?

  Thanks, Alex

  Have you ever used the Properies toolbar? Cmd + E.

  It is MUCH faster than opening the properties of comment every time. Sometimes, the Properties Panel takes 5 + seconds to open.

  The property bar you access to virtually all the properties we needed. In addition, it is contextual. Read the article below on how to use it. It works the same as is done at the time I wrote this article... only now he can be steeped. Document of Geek: how to change the font properties in a PDF Sticky Note

  

• How to select all text in a table with a single click cell?

  How to select all text in a table with a single click cell? I use TextField.selectAll () when you implement a table cell factory. But when I select a line with a single click, then a click on a table cell again: see the result image

  The text in the table cell is not all selected. What I simply selects all the text in a table cell when there is a click on it. How to realize that? Thank you

  Thanks for help ~.

• can perform us two actions with a single button in two clicks, one after the other?

  Mr President.
  
  can perform us two actions with a single button in two clicks, one after the other?
  
  I want that when I click on the button Add once it add data to the database and when I click again on this button it clears the form data to the empty fields.
  
  Concerning
  
  Tanvir

  In the code, it should be easy.

  The following code adds that a button called butman with text 'ADD '.
  It then registers a listener that will be called if the user clicks the button.

  This listener then calls the runAddData method if you clicked butman while it contained the text of "ADD" and it calls the runClearData method otherwise.
  That's why he will swap the functionality of the button between ADD and CLEAR on each click.

  final Button butman = new Button("ADD");
  butman.setOnAction(new EventHandler() {
            @Override
            public void handle(ActionEvent t) {
                      if (butman.getText().equals("ADD")) {
                                butman.setText("CLEAR");
                                runAddData();
                      } else {
                                butman.setText("ADD");
                                runClearData();
                      } // END IF-THEN
            }});
  

  I hope that's what you wanted.

  Further reflection.
  You might want to run the ADD and CLEAR methods in their own son so that it can run in the background without slowing down your user interface.

  I also reuse rather a single button for several features instead of to apply with hundreds of nodes used only rarely with masses of code to show and hide as needed.

• Script queue CM with output for allocated, running and waiting for process

  Hi all
  
  Could someone please share the script which gives the result as below:
  
  Script Manager simultaneous tail with output for allocated, running and waiting for processes within a single script.
  
  Thanks for your time!
  
  Kind regards

  You can find a lot of scripts in the old nets.

  Simultaneous treatment - what are the meanings of the Codes in the STATUS_CODE and the PHASE_CODE FND_CONCURRENT_REQUESTS Table columns? [152209.1 ID]
  ANALYZEPENDING. SQL - analyze all applications pending [134033.1 ID]

  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+query&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+time&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+STATUS_CODE&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+PHASE_CODE&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you
  Hussein

• CacheCade with a single SSD drive in R720xd flex bay?

  Simple question:

  What happens to my table, when a single SSD drive breaks down, which was used as a ramdisk of CacheCade?

  Will simply continue to run with a reduced reading performance since everything will be just for the main table?

  Or the whole table will fail causing the Server shut down? I hope not by I can't really find any info on what happens when CacheCade disks break down.

  I'm looking to use this in a new R720xd with the H710p, 12 3.5 '' SATA R10 and a single SSD drive in the modular Bay.

  Question: can I order even just one hard drive in the Flex Bay? The Configurator seems to insist on two identical drives in the flex Bay.

  Hello Thomas

  Thomas I have

  What happens to my table, when a single SSD drive breaks down, which was used as a ramdisk of CacheCade?

  It will be just a drop in performance. Playback performance will not have the cachecade.

  Thomas I have

  Can I order even just one hard drive in the Flex Bay? The Configurator seems to insist on two identical drives in the flex Bay.

  Online shopping is very limited. I tried to set up the configuration you are eager and encountered the same problems. Cachecade does not require more than one car, so you should be able to order it with a single disc.  I suggest you to contact a sales representative to place your order.

  Thank you

• How to focus on a web page with a single shortcut?

  I like to use the keyboard, scroll web pages with arrows... If the body of the page loses focus (for instance by pressing Alt + D) the only way (AFAIK) to focus the page again is by pressing Tab several times until I can continue with the scroll arrows. It would be good to focus a page with a single shortcut, is think?

  Press F6.

  • F6: select the address bar. move to the next image
  • SHIFT + F6: move to the previous image
    • Hotkeys - quickly perform common tasks of Firefox

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Question
  Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Hi Jlhillhouse,

  It is difficult to solve the problems of the computer without knowing all the details. You should look at the link I sent you and especially to Firefox is slow - how to make it faster. I don't know any known issue as you describe, it's probably a very good bet for a response.

• This external modem will work with Satellite L500-1XL, running Windows 7

  Hello

  When in Spain, I need to use the dialing up to the internet through Telefónica.
  I guess that the L500-1XL is not an internal modem?

  This external modem will work with the L500-1XL running Windows 7?

  Thank you very much in advance for your help.

  A

  Hello

  You re right Satellite L500 doesn t have an internal modem, so you need an external.

  I think you can buy every modem that is compatible with Vista. Alternative ask your favorite computer dealer or authorized service provider

  A friend got good experience with USRobotics 56K modem like this:
  [USRobotics 56K USB Faxmodem USR5637 | http://www.amazon.co.uk/USRobotics-56K-USB-Faxmodem-USR5637/dp/B0019LZCEI/ref=sr_1_1?ie=UTF8&s=electronics&qid=1269253039&sr = 8-1]