Implementation of collapsible list, cannot set field

Similar Questions

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• RN314 cannot set up alerts

  Just I have an open for this support ticket and I'm getting nowhere fast at the moment, while the community has been so useful until now I was wondering if someone here could help/advise.

  -For the NASs x RN31400 2 I am owner and you have registered with you I am unable to setup e-mail alerts. I tried to use 3 e-mail addresses of 3 service providers: Yahoo, Hotmail/Outlook and also my own ISP TalkTalk email providers. No matter what settings I use for all 3 e-mail providers, I get the following error message: check the settings of the smtp server cannot send a code error message 5008010002 msmtp test e-mail alert on my 3 x NV + s very well using my Yahoo e-mail address work. On one of the RN31400s using Yahoo worked initially and the alert section would say that it has been configured correctly and I'd get emails to my 2 hotmail addresses, it was on 1 of my RN31400s on the other RN31400 the settings would save not and always say, there was a problem but I had managed through test messages. Now, no matter what settings I use, which email provider I use, etc. I can't e-mail job alerts! Please help because this is obviously a problem with the NASs and the software on devices, the version of the firmware on two is 6.4.1 Ive set up the addresses of 3 E-mail on an e-mail within my network client and all 3 work well, the 3 x NV + s do not have a problem using my Yahoo account to send alerts check my routers and firewalls there is no blocked traffic and I can't telnet to Server 3 Messaging without problems. Please advise/help, thanks.

  And...

  OK the update of the firmware did not work, I have one of the update firmware version 6.4.2 RN31400 and after 2 reboots, I am still unable to receive job alerts.

  The I am using SMTP servers are:

  Yahoo =
  ------------------------
  Email provider: Custom
  User: [email protected]
  Password: xxxxxxx
  SMTP server: smtp.mail.yahoo.com
  SMTP port: I've tried 25, 465, and 587
  From: [email protected]
  Use TLS: I tried checked and unchecked

  Hotmail/Outlook.com =
  ------------------------
  Email provider: Custom
  User: [email protected]
  Password: xxxxxxx
  SMTP server: smtp - mail.outlook.com
  SMTP port: I've tried 25, 465, and 587
  From: [email protected]
  Use TLS: I tried checked and unchecked

  TalkTalk = it's the ISP I use!
  ------------------------
  Email provider: Custom
  User: xxxxxxx@TalkTalk,net
  Password: xxxxxxx
  SMTP server: smtp.talktalk.net
  SMTP port: I've tried 25, 465, and 587
  From: xxxxxxx@TalkTalk,net
  Use TLS: I tried checked and unchecked

  Ref: browser, I used Firefox and Internet Explorer, not that it should make no difference whatsoever.

  Ref: screen captures, don't need the parameters are listed above for the two RN31400.

  Ref: parameters for the NV 3 x + an are as follows:

  Yahoo =
  ------------------------
  Email provider: Custom
  User: [email protected]
  Password: xxxxxxx
  SMTP server: smtp.mail.yahoo.com
  SMTP port: 465
  From: [email protected]
  Use TLS: Is checked and

  Test of the emails for the configuration of alerts on the NV + s are still working fine, DO NOT WORK for the RN314.

  Please tell us what can be done to solve this problem, thank you.

  And...

  Full error message =

  Unable to send a test message.

  Unable to send a test message. Check the settings of the SMTP server. Code: 5008010002 error msmtp

  DateTime: 05:02:09 04/02/2016

  And...

  Hello

  Just right now I can read the KB article - which does not help somehow:
  KB.Netgear.com/app/Answers/Detail/A_ID/23066

  There is nothing wrong with the configurations that I use.

  All 3 servers SMTP and the above settings work very well on my NAS NV +.

  All 3 servers SMTP and the above settings work fine on Outlook or Mozilla Thunderbird's within my network.

  All servers SMTP 3 and address listed above work fine when I Telnet to them within my network.

  First settings of Yahoo SMTP worked well on one of the RN314 and seemed saved and ok.

  Also...

  At the beginning of Yahoo SMTP settings worked well on one of the RN314 but not record or say that it has been configured correctly.

  Then obviously there is something wrong with the SMTP service/server on these NAS RN314 2 bed.

  I am not willing to allow you access as it will provide no benefit whatsoever.

  For the course of 20 years, so it's nothing that can be done with you giving remote access with the exception of confirm you what I have already said previously, I have worked in it.

  And...

  So please advise what Netgear will do then or advise what other other confirming my settings allow remote access?

  Your forums to research it seems that problems with mail like this are apparently quite common, so what has already been done to solve the problem?

  Also the error code: Code: 5008010002 error msmtp

  Why you are not this survey with your development teams who wrote the OS on the NAS working on what actually the error means?

  There is nothing wrong with the configuration that it works very well on my 3 x NV + NAS, it works very well in e-mail clients, it works very well in Telnet, and it worked very briefly on the 2 x RN314 of for of Yahoo SMTP settings.

  Eron - if you are unable to help further please add this problem to your support line... 3rd line?

  Thank you.

  And...

  I also tried my account GMAIL apps less secure according to this thread the value:

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/cannot-set-up-alerts-on-my-ReadyNAS-RN314/TD-p/...

  GMAIL =

  ------------------------
  Email provider: Custom
  User: [email protected]
  Password: xxxxxxx
  SMTP server: smtp.gmail.com
  SMTP port: I've tried 25, 465, and 587
  From: [email protected]
  Use TLS: I tried checked and unchecked

  If this does not work on the RN314 but it works very well on the NV + of via Telnet and in an email client (x 2)

  Please escalate to your next level of support, thank you.

  Right, I have fixed on one of the RN314 far...

  I backed up all my data on this RN314 and did a factory default.

  I have reproduced the RN314 settings manually then nonworking time for the reset RN314 except for identification data, i.e., name, etc.

  Exactly as it was before... and now the RN314 in default works fine.

  I am currently backing up the data on the RN314 now inactive to perform a Setup factory on that one and see if that solves the problem on this one here.

  Then we can close this and I will refer to it with a new thread if I need if the second RN314 still has problems after the default settings.

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• Cannot set a default for documents pdf Acrobat XI.  Wants to stay with Microsoft Edge.  16 Windows.

  Cannot set a default for documents pdf Acrobat XI?  Wants to stay with Microsoft Edge.  16 Windows.

  Hi tenleyvan,

  Could you please if you want to XI default Acrobat open pdf documents?

  Or do you want to open pdf in Microsoft Edge?

  Do XI Acrobat default to open the PDF, right-click on any pdf file > click Open with > choose another application > select Adobe Acrobat in the list > check "Always use this app to open .pdf files" > OK

  It goes the same for Microsoft Edge, select Microsoft Edge in the list instead of Adobe Acrobat.

  Let us know if you face any problem.

  Thank you! Shivam

• You cannot set declaratively developing the slider if you specify an ONLOAD.

  Hello
  
  In my application, I have two javascript functions in the Html header area... and by calling the onload in the Body Html attribute... This sceneriao he launched an exception as shown below...
  
  
  
  1 error has occurred
  You cannot set declaratively developing the slider if you specify an ONLOAD in this attribute. You can set update of the slider programmatically by using the following syntax:
  OnLoad = "mystuff (); first_field(); »
  
  
  can u suggest me how to overcome this problem...
  
  
  Thank you
  David...

  Hi David,

  On your page, go to your page attributes and you will see that it is to set the focus on the first field when the page loads. You need to remove what you can have only a single onload function call. If you need to set the focus, your onload function is adjustable to do this.

  Andy

• Cannot set new bookmarks; Some have disappeared; saved but rebuilt; lost a lot more. Help!

  Problem has grown gradually over a period of 2-3 days. First of all, some favorites have disappeared from the toolbar. At the same time, 'Bookmark this Page' has stopped working, and cleared from the list "recently set bookmark". When I followed the recommended procedure Firefox for backup and restore, I repeatedly had the message that Firefox could not process the restoration. Then 3/4ths my bookmark folders disappeared. This happened it try with different dates backup. Now, I find that a number of other people have similar problems. Like some of them, my problem may have begun during a restart because of a deadlock in another program. Mozilla's Support system seems far too complicated, time-consuming and circular, and talking to a person live doesn't seem to be an option. If this is not corrected within the next 24 hours I'm trying other browsers, after use Firefox almost exclusively for several years.

  I see that you have the extension of Maintenance of places. Using this fact no difference to your ability to add bookmarks, or stop losses?

  To test the integrity of your backup files of bookmark, I will suggest you try to restore one or two of them to a new profile.

  Since I'm a Windows user, I apologize in advance if this answer is not entirely applicable to your system.

  Bookmark backups in a convenient location

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press enter/return

  In the first table of the page, click on the button 'show in Finder '. This should start a new Finder window. Then, double-click the folder bookmarkbackups . Copy some of your recent backups on the desktop or another location.

  Create a new Firefox profile

  Leave Firefox runs. Start up in the Profile Manager using the method in this article: use the Profile Manager to create and delete profiles Firefox.

  Notes:

  • Do not delete anything here!
  • Any time you want to switch profiles, leave Firefox and return to this dialog box.

  Click on the button create a profile, give it a name like Test0426 and skip the option to change the location of the folder. Select the new profile from the dialog box, and then start Firefox.

  Test bookmark backups

  Firefox in the new profile should look like a new installation of the plant. You can use the steps in this article to test one or more of the files you copied to your desktop (or another location): restoration of the bookmarks from a backup or move them to another computer (use the option of choosing a file instead of one of the dated options).

  Firefox in the new profile read and restore the backup?

  Return to your Normal profile

  Exit Firefox and look at this article: use the Profile Manager to create and delete profiles Firefox.

  When you return to the Profile Manager, you might be tempted to use the button Delete a profile on Test0426. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.

• Tecra A4: Cannot set the resolution of 1280 x 800

  Hi all.

  I have a Tecra A4, and for the last 2 days I am trying set up the screen at native resolution of 1280 x 800, without sucssess.

  I try a lot of things, like updating drivers, use the restoration of the system, the value 'stretch' in the BIOS, etc, but this resolution do not appear on the display settings (I use XP SP2). I've only 800 x 600 and 1024 x 768.

  In any of these resolutions, a wide black border appear to the right of the screen. A small border appears on the bottom, too.

  Please, how can I solve this problem? I don't want to use the Toshiba restore, some programs I use are very difficult to find and install.

  Thank you.

  You cannot set this resolution if this resolution of 1280 x 800 is not part of the display driver.
  The graphics card driver contains all available resolutions and if one is missing, I mean not rated, it s not able to select

  Nothing to buddy

• Satellite A30 - cannot set up the binding wireless modem

  Hello
  I have a satellite a30. I just upgraded to broadband and cannot configure the WiFi wizzard. the modem is working perfectly thanks to threads, but cannot set up wireless despite my efforts! Please can someone help?
  see you soon
  Claire

  Hello

  What's the problem?
  You are not able to see the thread or what?

  Are you sure of the laptop and built-in wireless network card?

  Remember that the WiFi card is optional on the Satellite A30 and not all models includes the Wlan miniPCI card
  Thanks for posting more details!

  PS; If the laptop supports a WLan card internal, you should check only that steps;

  -Check if the WLan adapter is enabled on the laptop. Activate the switch on the side of the laptop and the FN + F8 key combination!
  -Check if the windows own WLan configuration is marked
  -Be sure that you use the right WLan encryption and whether encryption is supported by WLan modem (router) and wireless network card
  -Check if the standard 802.11 WiFi, B or G is accompanied by WLan modem (router) and wireless network card
  -Make sure that the router MAC filtering option has been disabled!

  As you can see all of these options are important to connect to the wireless LAN.

• Cannot insert field or paste into the existing local Variable (Boolean container)

  Cannot insert field or paste into the existing local Variable (Boolean container)...  TestStand 4.1.

  It is very strange, especially since I've done it before.

  'Paste' and "insert field" selections are grayed out and disabled in the context menu.  I tried everything I could imagine and tried various combinations of positions.  I'm sure it's something simple, bu redicoulously, I can't find the redicule to solve this annoying problem issue.

  The local variable is a container of Boolean.  It has 90 elements and I need to add one more.  I can not change / rename or do something with this Local.  Must be karma (for those who know me in the LabVIEW forum).  Usually, you do a right click, insert field and that's where...  Not this one...

  Anyone seen this before?  Closing and re-opening TestStand doesn't change anything.  There is a collection in LabVIEW that feeds the local section in TestStand.

  It is a container of data custm type.  To change flags are ok (edit is allowed).  Can't think of any other valuable information...

  He finds...

  It should be edited in the Data Types...  It was not automatic after reloading the prototype of LabVIEW.

  I knew it was something stupid that I didn't...  I became close... but had not sought far enough.

  I was looking at the range of Types, but not in the file of the sequence...

  

• Cannot set up eprint

  Cannot set up eprint.

  My printer was working with eprint very well until I got a new router. Since I can't not to use or setup eprint.

  It is connected to the home network wireless and it works fine for printing documents.

  I have reset the factory for Web services settings, but still no luck. Continue to flock to the top that I'm not connected to a network and wants a proxy

  Can anyone help

  Thank you

  Hello

  The valid IP address would start by 192.168 if the IP address starts with 169 or something else is not a valid IP address.

  If the address of your router is 192.168.1.1 then the IP of the printer should be something like 192.168.X.X

  OR

  If your laptop is connected to multiple networks, this problem may occur. Please connect your laptop to only if the wireless network to which the printer is connected, try anything again.

  Kind regards

  Olilloyd

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• Cannot set "Power Options."

  Cannot set the 'power options' in the Power Options dialog box.  There is no saved power scheme and boxes for standby, turn off hard drive, hibernation, etc. are all dark and I cannot choose one of them.  Help me if you can.

  Hello

  ·         Did you do changes on the computer before the show?

  Follow the steps in the Microsoft Knowledge Base article and check.

   

  Power scheme options are unavailable on a Windows XP-based computer

  http://support.Microsoft.com/kb/913622

  You can also view the article mentioned below for more information:

   

  Configure Windows XP power management

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/configure-power-management

  Let us know if that helps.

• Error - ' Manager of power strategy cannot set the regime... two revision levels are incompatible "when trying to save the scheme in power options.

  Original title: cannot set a power scheme in Power Options

  Cannot set a power scheme. When I try to save the scheme, "Manager power strategy impossible to define the... two revision levels are incompatible."

  How can I fix it?

  Hi BernieHopkins,

  1 have you properly previously defined the power scheme?

  2 have you made any hardware changes or software on the computer before this problem?

  3. What is the full error message that you receive?

  If you receive the same error as mentioned in this link, you can follow this link & check if the problem persists.

  Error message: Power Manager political unable to define a strategy. Indicates two revision levels are incompatible

  Hope the helps of information.
  Please post back and we do know.

• HP LaserJet Pro MFP M125-M126: cannot set the default printer

  Hello

  We have HP LaserJet Pro M125 - M126 PCLmS network MFP all in one printer, as the installation of all users was a success and was working fine the day of installation, after a day all users face the question cannot set default pritner, cannot print, all users are faced with question at a time ,

  quick response is appreciated,

  Hi @darshan9 ,

  I see that you have problems affecting the default printer for users and you cannot print over the network.
  I'd love to help you.

  Do you mean the configuration of individual computers with the printer on the network users, or a computer with multiple users?

  You have administrative rights on the computer to make changes?

  What is the name and the product number of your printer? How can I find my model number or product number?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.

  I suggest you to check if you have another account user or an administrative account.

  I also suggest to create a new user account and check if you are able to set the default printer.

  Create a user account. Create a user account.

  If you're still having problems, run the Fixit tool. Diagnose and automatically fix problems printing and printer.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.