Similar Questions

• How to import a TXT file in my list of firewall rules?

  Good then I exported a list of firewall rules in a txt file. I then copied on some firewall rules. Then I saved the file txt and I wonder how I can re - import the txt file. Please note that I don't know of import policy...

  UH I thank you for responding, but apparently you misunderstood what I meant... When I go into windows firewall, there is an option to export the list of rules I want to know is how to re - import this list of rules in because there is no other choice... If so how do I do?

  Since I couldn't find a solution that I found something different that also works. I found a .bat file that you can put in the folder in which you want to block the program and it crashes all the exe files in this folder and all subfolders. You can even choose a fix before custom firewall rule... If any other person having this problem follow the instructions, I provide below:
  
  Instructions (found online modified by me)

  Create a .bat file, named "addfwrs.bat" without the quotes using italic text, then follow the additional instructions:

  off @echo
  REM FILE OF ORDERS CREATED BY CHARLES DE HAVILLAND 20/02/2012
  CLS
  If '%1 'is' ' GOTO: norulename
  RULENAME SET = %1
  ECHO creating/starting of firewall rules for all files with the rulename of 'RULENAME '? % *.exe
  ECHO.
  ECHO.

  pause
  Echo.
  FOR /r %% in ("*.exe") Do (@echo %%d KB
  ("NETSH advfirewall firewall add rule name =" "% RULENAME-% ~ nxG" dir = program = "% G" action = 'block' enable = 'yes')
  FOR /r %% in ("*.exe") Do (@echo %%d KB
  ("NETSH advfirewall firewall add rule name =" "% RULENAME-% ~ nxG" dir = program = "% G" action = 'block' enable = 'yes')
  Echo.
  ECHO done.
  Echo.
  GOTO: finish
  : norulename
  Echo error! -You have not specified a type Rulename - Addfwrs 'Rulename '.
  Echo.
  : Finishing
  ECHO batch finished...

  Additional instructions:

  Firewall Windows 7 works fine, but it's not easy to set up with several (very long) programs.
   
  I watched for centuries, trying to find a way to block several files .exe to Windows 7 only once; It seems that the only method was to create my own batch (windows script) file.
  I've added below for anyone to use / modify for their own purposes.
   
   
  Run the commands below (addfwrs.bat) file, will create inbound AND outbound firewall rules that block all .exe files in your chosen folder and subfolders to access internet.
  Very useful.
   
  To use:

  (1) place addfwrs.bat in the folder in which you want to block .exe programs (it crashes all the programs exe in no matter what subfolders if you can place it in a folder without any exe it blocks)
  exe in several subfolders both programs)

  (2) now run CMD as administrator.

  (3) copy the new directory (eg. c:\Programs Files (x 86) \YourProg\) where you put the addfwrs.bat file

  (4) paste it into the directory with "cd" CMD and a space before the directory (example: cd c:\Programs Files (x 86) \YourProg\) and press ENTER.

  (5) now run the batch file by typing: addfwrs.bat "rulename" example: addfwrs "BLOCK_PROGRAM_NAME_HERE".
  (Make sure there is no space in the rulename of the firewall rule, so use underscores as spaces.)

  N.B: It is important that you add a rulename firewall, so that you can identify the rules when adding to the firewall at a later date.

  (6) follow the information on the screen, he will advise you what rules he is creating.

  (7) check the Windows Firewall for new rules listed and you can then delete the addfwrs.bat file where you put it (it is necessary even if you can keep it somewhere for later).

  Quite.  Hope you find it useful, I certainly have!
  Enjoy!

  N.B: The new rules contained in the bosom of your firewall (In/Out rules), change as and when you need.

• Import a TXT file in the user dictionary

  Hi Forum,

  This is the script I m using import file txt in the "user dictionary", but the result is "undefined".

  Could someone help me how to import a Txt file in the user dictionary.

  var myUserDictionaries = app.userDictionaries;

  var myCountDict = myUserDictionaries.count ();

  myDoc var = app.activeDocument;

  myAddedWords = File("//Users/wleastudio/Desktop/AVIVA_dictionary.txt");

  for (var i = myCountDict-1; i > = 0; i--) {}

  myUserDictionary = myUserDictionaries [i];

  var myAddedWords = myUserDictionary.addedWords;

  myUserDictionary.addWord [myAddedWords];

  }

  Thank you

  Hello

  Try this example for the US English:

  var myUserDict = app.userDictionaries[21];//Should be English USA
  var txtFile = File('~/Desktop/test.txt');
  txtFile.open('r');
  wordsArray = txtFile.read().replace(/["'.,:;!?()\/\d\[\]]+/g, ' ').split(/\s+/);//cleaning the text to get only "words" mostly adapted by jongware
  txtFile.close();
  
      myUserDict.addWord(wordsArray)
  

  So long

• Import a txt in report file

  I have a signal Arinc I decoded in each of its inputs/outputs digital.  Since I was more than 150 e / s, I needed a way to sort and make a quick report on them.

  I have three categories.

  1. remained = 1 throughout the test

  2 sleep = 0 throughout the test

  3. changed from 0--> 1 or 1--> 0 during the test.

  I just want a list of the signals for each of these categories in my report.

  I created a file txt for them to go, but how to import that in my report?

  Or y at - it an easier way?

  Here's an example of my code...

  "HCM1.
  
  "Decode HCM1 Label 104 - Untitled 3".
  
  Calculate the appeal ("Ch(""HCM1_104/HCM_1_CAS_HSOV_A1_CLOSED"") = g (Ch (" ' [1] / Untitled 3 "" "), 0) '")
  
  Calculate the appeal ("Ch(""HCM1_104/HCM_1_CAS_HSOV_A2_CLOSED"") = g (Ch (" ' [1] / Untitled 3 "" "), 1)" ")
  
  Calculate the appeal ("Ch(""HCM1_104/HCM_1_CAS_HPP_A_RUNNING"") = g (Ch (" ' [1] / Untitled 3 "" ")," 2) ")
  
  Calculate the appeal ("Ch(""HCM1_104/HCM_1_CAS_SYS_A_HI_TEMP"") = g (Ch (" ' [1] / Untitled 3 "" "), 4) '")
  
  Call to calculate ("Ch(""HCM1_104/HCM_1_CAS_SYS_A_LO_PRS"") = g (Ch (" ' [1] / Untitled 3 "" "), 7) '")
  
  Call to calculate ("Ch(""HCM1_104/HCM_1_CAS_HPP_A_LO_PRS"") = g (Ch (" ' [1] / Untitled 3 "" "), 12)" ")
  
  Calculate the appeal ("Ch(""HCM1_104/HCM_1_CAS_HPP_A_HI_TEMP"") = g (Ch (" ' [1] / Untitled 3 "" "), 13)" ")
  
  "Decode HCM1 Label 105 - Untitled 4".
  
  Calculate the appeal ("Ch(""HCM1_105/HCM_1_FLT_HSOV_A1_FAIL"") = g (Ch (" ' [1] / 4 Untitled "" "), 0) '")
  
  Calculate the appeal ("Ch(""HCM1_105/HCM_1_FLT_HSOV_A2_FAIL"") = g (Ch (" ' [1] / 4 Untitled "" "), 1)" ")
  
  Calculate the appeal ("Ch(""HCM1_105/HCM_1_FLT_EDP_A1_FAIL"") = g (Ch (" ' [1] / 4 Untitled "" ")," 2) ")
  
  Calculate the appeal ("Ch(""HCM1_105/HCM_1_FLT_EDP_A2_FAIL"") = g (Ch (" ' [1] / 4 Untitled "" "), 3) '")
  
  Call to calculate ("Ch(""HCM1_105/HCM_1_FLT_SYS_A_PRS_FLT_CLG"") = g (Ch (" ' [1] / 4 Untitled "" "), 6) '")
  
  Call to calculate ("Ch(""HCM1_105/HCM_1_FLT_SYS_A_RET_FLT_CLG"") = g (Ch (" ' [1] / 4 Untitled "" "), 7) '")
  
  Call to calculate ("Ch(""HCM1_105/HCM_1_FLT_EDP_A1_FLT_CLG"") = g (Ch (" ' [1] / 4 Untitled "" "), 8)" ")
  
  Calculate the appeal ("Ch(""HCM1_105/HCM_1_FLT_EDP_A2_FLT_CLG"") = g (Ch (" ' [1] / 4 Untitled "" "), 9)" ")
  
  Calculate the appeal ("Ch(""HCM1_105/HCM_1_FLT_HPP_A_LO_QTY"") = g (Ch (" ' [1] / 4 Untitled "" "), 11)" ")
  
  Call to calculate ("Ch(""HCM1_105/HCM_1_FLT_HPP_A_FAIL"") = g (Ch (" ' [1] / 4 Untitled "" "), 12)" ")
  
  Calculate the appeal ("Ch(""HCM1_105/HCM_1_FLT_HPP_A_CDF_FLT_CLG"") = g (Ch (" ' [1] / 4 Untitled "" "), 14)" ")
  
  Call to calculate ("Ch(""HCM1_105/HCM_1_FLT_IV_A_FAIL"") = g (Ch (" ' [1] / 4 Untitled "" "), 15)" ")
  
  Calculate the appeal ("Ch(""HCM1_105/HCM_1_FLT_IV_A_FAIL_LOCAL"") = g (Ch (" ' [1] / 4 Untitled "" "), 16) '")
  "Decode HCM1 Label 106-5 Untitled.
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_PF_DPI_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 0) '")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_RF_DPI_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 1)" ")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_EDP_A1_CDF_DPI_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" ")," 2) ")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_EDP_A2_CDF_DPI_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 3) '")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_EDP_A1_PS_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 4) '")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_EDP_A2_PS_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 5) '")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_PX_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 6) '")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_TX_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 7) '")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_QX_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 8)" ")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_HSOV_A1_IND_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 10) '")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_HSOV_A2_IND_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 11)" ")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_EDP_A1_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 12)" ")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_EDP_A2_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 13)" ")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_FLT_FV_A_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 14)" ")
  
  Calculate call ("Ch(""HCM1_106/HCM_1_HSOV_A1_RELAY_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 15)" ")

  
  Calculate call ("Ch(""HCM1_106/HCM_1_HSOV_A2_RELAY_FAIL"") = g (Ch (" ' [1] / Untitled 5 "" "), 16) '")

  Sun k, m, pMyChn, translate, ArincTrue, intMyHandle01, intMyHandle02, intMyHandle03, intMyText, intMyError01, intMyError02, intMyError03
  intMyHandle01 = TextFileOpen ("C:\ArincTrue.txt", tfCreate or tfWrite)
  intMyHandle02 = TextFileOpen ("C:\ArincFalse.txt", tfCreate or tfWrite)
  intMyHandle03 = TextFileOpen ("C:\ArincChange.txt", tfCreate or tfWrite)
  For k = 2-4
  M = 1 to GroupChnCount (k)
  Set pMyChn = Data.Root.ChannelGroups (k). Channels (m)
  Result = ChnValMax (pMyChn) - ChnValMin (pMyChn)

  If result = 0 and ChnValMax (pMyChn) > 0 then
  intMyText = TextfileWriteLn (intMyHandle01, pMyChn.Name)
  ElseIf result = 0 and ChnValMax (PMyChn) = 0 then
  intMyText = TextfileWriteLn (intMyHandle02, pMyChn.Name)
  on the other
  intMyText = TextfileWriteLn (intMyHandle03, pMyChn.Name)
  End If

  Next
  Next
  intMyError01 = TextFileClose (intMyHandle01)
  intMyError02 = TextFileClose (intMyHandle02)
  intMyError03 = TextFileClose (intMyHandle03)

  Hi 2Pale4TX,

  You cannot easily reference the contents of an ASCII file.  Instead, I suggest you make a new group of 3 text strings that you can drag onto a REPORT table.

  Dim k, m, z, ResultsGroup, TrueChannel, FalseChannel, ChangeChannel, group, channel, result
  
  Set ResultsGroup = Data.Root.ChannelGroups.Add ("Results")
  
  Set TrueChannel = ResultsGroup.Channels.Add ("ArincTrue", DataTypeString)
  
  Set FalseChannel = ResultsGroup.Channels.Add ("ArincFalse", DataTypeString)
  
  Set ChangeChannel = ResultsGroup.Channels.Add ("ArincChange", DataTypeString)
  
  For k = 2-4
  
    Set Group = Data.Root.ChannelGroups (k)
  
    M = 1 to Group.Channels.Count
  
      Adjust the strings = Group.Channels (m)
  
      William = CMax (Channel)
  
      Path = CMin (Channel)
  
      Result = William - path
  
      If result = 0 and ChMax > 0 Then
  
        z = TrueChannel.Size + 1
  
        TrueChannel (z) = Channel.Name
  
      ElseIf result = 0 and ChMax = 0 Then
  
        z = FalseChannel.Size + 1
  
        FalseChannel (z) = Channel.Name
  
      On the other
  
        z = ChangeChannel.Size + 1
  
        ChangeChannel (z) = Channel.Name
  
      End If
  
    Next am
  
  Next ' k

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to import cookies from an exported file in IE

  Cookies can be imported into Firefox directly to a ".txt" to IE file? (IE bookmarks 'Favorites' file came in fine).

  I'll put up a new Linux and don't have / want IE top, so the ability to import data from another browser is not much help.

  If this does not work, you can use the Cookie importer to import cookies.txt in Firefox

  • https://addons.Mozilla.org/en-us/Firefox/addon/cookie-importer/

• Import MATLAB generated the file ascii in the Analog Waveform Editor

  Hi all

  I tried to create signals by the Analog Waveform Editor. I have some Waveform generated from MATLAB and recorded as ASCII files, following the instructions on this Web page OR, but it did not work properly. For example, if I produce a column to fill with 0.5 and import the file into the analog signal generator, all I get is a huge series of random number. I missed a few steps in the import of the waveform?

  Thank you!!

  Just for your reference, I could almost in half the size of your file just by saving as .hws. Also to answer your last point, you may have issues opening / importing your .txt file because it may have been opened in another program at the same time. Make sure that you have closed it in Notepad or Excel or other programs which may still be locking on the reference.

  Kind regards

  Jason L.

• [JS] How to set the import text option?

  File-> location-> after import check "Import Option to see the property.

  Hello.

  I want to change character set to import a txt file.

  Please any advice for me.

  Thank you.

  See screenshot

  

• More graphics problems, but with imported data-driven jpg

  Hello again,

  IM import a .txt file in which there are some JPEGs in replaced pixel, JPEG files are a transparent square bottom with a circle as the image.

  The layer replace pixel is a circle. When I export, transparent corners are still show as white corners, spoil the rest of the image. The image of the circle jpg is in the right place. I just lose the corners. Mark

  Open your png files in Photoshop. Add an empty layer underneath. The yout yout layer so gray blendinf belebd option. Move the slider on the upper right of Pentecost the Goes white.  Resave then re-record a replace the png on disk file.

  

• Collage error: runtime error. Error: access violation, address of the error: 0000 P 280, the Module name: GFSData.DLL

  Hello to all on the forum,

  I am running DIAdem 2015 (15.0.0f6005) on a Windows 7 Pro SP1 i3 4 GB RAM machine.

  I want to evaluate a test. Data are expressed as 25 .txt files. I need to plot, one of the values on the whole test time. I tried to combine the data from all 25 in one file .tdm .txt files. I came far enough until I met my problem. After gathering around 15 .txt files in a .tdm, tiara doesn't let me continue. It gives this error message (in German, I'll translate as good as possible):

  "When executing command 'DataBlClpPaste('1-52',1859122,0)' a rumtime error has occurred.

  Error: ACCESS VIOLATION

  Address of the error: 0000 P 280

  "Name of the module: FGSData.DLL.

  I will describe my procedure in which this happened:

  -Open the .txt with plugin I had created the first import

  -Ribbon with two windows view channel: have the target in a secondary window group, drag the newly imported from .txt in the other channels

  -In the secondary window with new data, select the lines I want to add to the data target group by clicking on the first line, then scroll to the last row and shift-select that. CTRL + c to copy the data

  -In the target group, click the first empty line, and then ctrl + v to paste data here

  After the last step, instead of pasting the new data in the target dataset, the above message error. I can't do anything, but click on 'ok '. After ok, the program window will not respond to any click except for switching between Navigator / View / analysis /... I have to close DIAdem, where I can always select "close and save", that works too.

  I could go a few times after reopening DIAdem, but finally, which stopped working. It now gives me the error message whenever I try to do this routine. The .tdm file is 21Mo now, the .tdx is 1.1 GB.

  I appreciate any help on this, I really would prefer combining data using DIAdem on trying to copy and paste around 1 GB of data .txt into one giant .txt file. It takes very long to not even open a .txt of 50 MB file, I fear this would be a messy process.

  Best regards

  Simon

  If you are using DIAdem 2015, there is a new entry in context menu where you can select Add.

  Maybe it helps.

  The help of DIAdem 2015:

  Adding data

  
  

  Adding data to merge similar series ratings data in order to deal with them. In the process, DIAdem adds the data to load for existing channels with the same name in the data portal instead of storing data in new channels. Perform the following steps to add the external data area data channels in the data portal:

  1. Open the NAVIGATOR tiara.

  
  

  2. Select remove internal data to delete the data in the data portal.

  
  

  3. Find the Demo1.tdm file in the file browser.

  
  

  4. Drag and drop the file in the data portal.

  
  

  5. Select the Demo2.tdm file in the file browser.

  
  

  6. Open the context menu of the file and select Add data.

  
  

  Tiara adds the data in channels that have the same name in the data portal. In the properties of the Data Portal window, you can see that the number of values in the channels has doubled.

• Subvi with while loop + event structure works is not in multi tab VI

  Hi all

  I'm developing an interface for the control of a prober using Labview 2012, and I'm stuck with a question.

  First I provide you with a simplified version of my VI control interface and the sub - VI used to generate and manage the mappings of wafer.

  The VI is composed of several tabs: Prober initialization, manipulation of Wafer, Wafer map, status, error.

  The sub - VI can:

  1 / initialize the grid to display the map (Subvi Init grid not provided here)

  2 / coordinates XY for import a txt file (Subvi Wafer map Import)

  3 / view contact information and the index of the sector under the cursor

  4 / and what position die is double clicked and the Boolean 'Edit Wafer map' is true, then the user can change the State (color) of the matrix between die on platelets and selected Die

  My question:

  If I use the sub - VI by itself, it works fine. However, when I use it as a Subvi in the 'Wafer map' tab, the plan does not rise and I can use any features incorporated into the Subvi.

  I suspect that the while loop + structure of the event of sub - VI the bottleneck here.

  However I do not know which way to go, that's why I'd be happy to have some advice and help here.

  Thank you.

  Florian

  The question arises because your hand loop 'for' cycles of 33 times.  In the loop of 32, appears your Subvi and execution is passed to your Subvi.  During this time your main VI expected Subvi in the end, she never does.  You could spend your Subvi out of the main loop of the program and run in a separate process, in order to pass data using queues, but you have to find a way to close the Subvi (i.e. a queue).  By moving the Subvi on the main process, it is independent and you can do what you want to do with the events and others.

• Automatic renaming of channel

  Hello

  I have Diadem 2011 and I am facing a problem when I try to rename a channel (loaded on my data portal) list automatically. My list of channels and their corresponding new names are written in a text file with the following syntax:

  initial name1, new name1

  initial name2, new name2

  ..................

  n n, new name original name

  My first idea was to import this .txt file to create 2 channels for example named "old" and "new channel" and use the rename command in a loop like this:

  For i = 1 to length (old canal)

  Data.Root.ChannelGroups (1). Channels (old channel (i)). Name = new channel (i)

  next

  This command works correctly if I replace the old channel (i) and channel (i) again by a string like for example "channel 1" and "canal2". In my opinion, there is a problem with the data type, but I can't seem to solve.

  I also tried the conversion of type of data, but without success.

  Thank you in advance for your help

  Jeremy

  Hi Jeremy,.

  I would recommend read you the file to search for name in memory instead of strings in the data portal.  The code uses 2 parallel string tables, but the Dictionary object here is another good way to do.

  NameArrayFilePath = CurrentScriptPath & "name Arrays.csv".
  
  Call ReadNameArrays (OldChanNames, NewChanNames, NameArrayFilePath)
  
  Set Group = Data.Root.ActiveChannelGroup
  
  jMax = Group.Channels.Count
  
  FOR j = 1 TO jMax
  
    IF Group.Channels.Exists (OldChanNames (j)) THEN
  
      Adjust the strings = Group.Channels (OldChanNames (j))
  
      Channel.Name = NewChanNames (j)
  
    END IF
  
  NEXT ' j
  
  Void ReadNameArrays (OldChanNames, NewChanNames, NameArrayFilePath)
  
    Dim j, f, OFS, passes
  
    Set fso = CreateObject ("Scripting.FileSystemObject")
  
    The value of f = fso. OpenTextFile (NameArrayFilePath, 1).
  
    ReDim OldChanNames (0)
  
    ReDim NewChanNames (0)
  
    While NOT f.AtEndOfStream
  
      Cols = Split ("" & f.ReadLine, ',')
  
      IF UBound (passes) > 1 THEN
  
        j = j + 1
  
        ReDim Preserve OldChanNames (j)
  
        ReDim Preserve NewChanNames (j)
  
        OldChanNames (j) = Trim (collar (1))
  
        NewChanNames (j) = Trim (collar (2))
  
      END IF
  
    Loop ' selection until what EOF.
  
    f.Close
  
  End Sub ' ReadNameArrays()

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• What vWorkspace versions are WSM compatible licenses?

  vWorkspace 7.2 sounds like he accepts the WSM and vWorkspace licenses.  Which is the last version that is compatible with the WSM licenses or licenses WSM work in space 8.0 and 8.5?

  Thank you!

  Hi Eric,.

  with the release of vWorkspace 8.5 only vWorkspace licenses but is more old WSM licenses are issued.

  7.2 WSM can import legacy licenses WSM (.txt) and license vWorkspace (.asc) files.

  You cannot license Import WSM (.txt) files in vWorkspace. However, if you buy vWorkspace first edition by access device, you can use the license in WSM and also vWorkspace, because it is now a product.

• Replacement motherboard for X 61 Tablet SXGA +.

  My X 61 is dead because of a spill of soy milk in the keyboard (aren't these supposed to be spill proof?). The mother board seems fried and needless to say I'm on ebay. I want to continue to use that box despite the bubbles.

  The FRU on my machine says: 42W7818 708

  Computer type: 7764 CTO

  On ebay, some show the number 3-digit and not others. How can I ensure the compatibility and support my SXGA screen? What are the importance of the final figures?

  for example http://www.ebay.com/itm/IBM-Lenovo-ThinkPad-X61-Tablet-Laptop-Motherboard-42W7818-Tested-100-OK-/330...

  any help is appreciated

  All X 61 Tablet Council will lead the SXGA + Panel, no problem there.

• Blocking of hosts using Firesight and firepower

  I was curious if there is a section in firesight where it could be programmed to block hosts like CISCO host IPS blocks section? A bit like the list hosts blocked for triggering the signatures. Try to translate this into the new product.

  In addition, in the event action filters. One possibility might be a rule of trust in the correct access control strategy?

  Hello

  Access control strategy is intelligence Security tab that allows you to block connections to/from any IP address you put into the black list. You could also simply connect instead of block by enabling logging and changing the drop to monitor action.

  Security Intelligence is configurable by access control policy.

  Under management of the object, in the section, you can also import the .txt file based containing IP addresses or create one if feed to a server where the .txt file is hosted.

  A rule of confidence action implies that you will perform inspection of traffic that matches your rule conditions.

  Hope this helps

  Paul

• utility outlineload error - unrecognized column header value "Base currency"

  Outlineload.cmd/a: < app > U:admin /D:Entity /I:D:\Import\Entity.txt /L:D:\Import\Entity.log /X:D:\Import\Entity.exc

  That's what I see in my folder EXCEPT for the exceptions. However, I can't find anything wrong with the header of column value reference currency in the import of the entity file. Any suggestion greatly appeciated. I read through other messages that talk about the unrecognized header value column, but those that are specific to the column alias or in need of a space after the column, etc, I found nothing on the Base currency.

  The funny thing is that I exported dev and re same file imported to DEV without change, even after that, it's the same error I get. Clearly the application rejects the header value so that it can export the same thing.

  [Mar 29 23:59:32 EDT Apr 2014] Unrecognized column header value "Base currency".

  [Mar 29 23:59:32 EDT Apr 2014] Impossible to get analytical information and/or perform a data load: values of unrecognized column header, refer to previous messages. (Note: column header values are case sensitive.)

  [Mar 29 23:59:32 EDT Apr 2014] Planning of vector data store loaded with exceptions processes: records not all input have been read errors (or empty input file). 0 records were read, 0 data records have been processed, 0 were accepted for loading (check the actual load with Essbase logs), 0 were rejected.

  Hello

  you have a request for currency?

  If this is not the case, try to remove this column.

  Welcome them

  Kevin Kraft