ZBook 17 reads no sound in the determination of Blackmagic

Similar Questions

• Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  I am going to Japan November 2016 and plan to buy unlocked (no sim) iphone to use in my country (Thailand) 7.

  However, I have read some post on 'mode of politeness' in Japanese phone but the conclusion is not clear whether you can disable shutter sound (without sim) unlocked iphone 7 or not. Then, someone could share on the current situation?

  Thank you

  No, its required by Japanese law shutter. Even if the iPhone is

  is no longer in Japan, you will not be able to turn off the shutter sound.

  You should also check with the seller to be sure you can get the

  iPhone unlocked from the Japanese wireless provider to use with your

  carrier in Thailand. And check that the iPhone is unlocked before leaving the

  retailer.

• No sound from the HDMI connection Toshiba Bluray player BDX2100

  Hello

  I'm a newbie so I don't know if I'm in the right room or not, I want to ask that I have a Toshiba Blu Ray player model number or to number BDX2100 I have set up my fine reader TV and blu ray.

  There is one thing when I play my TV to HDMI 1 or 2, the image appears but there is no noise at all when I go on the Blu Ray in the audio settings menu it says 2nd audio or something to do with the HDMI is turned off.
  Oh I'm 100% sure and my tv is Sharp Aquos LC-22LE320 is not the TV because when I put the SCART lead in or put it on AV it works fine.

  The only problem is the sound with HDMI connection. If anyone can help, it will be very happy because it has been me bloody crazy.

  -musicman1982

  Hi mate

  It is a Toshiba computer / laptop computer forum.
  You will meet people who want to talk about options for laptops and Toshiba laptops.
  I doubt anyone here would be able to help you with this drive blueray.

  But in your case, I would first check the settings of the TV you.
  Check whether the sound via the HDMI port is enabled.

  > in the settings audio, it says the 2nd audio or something to do with the HDMI is turned off.
  I don't know why 2nd audio is mentioned there but maybe you should check if you can switch this 1 audio (audio main stream) m

  I recommend also consulted this blueray Player user manual.

• Qosmio X 70-A-12 X - no sound through the HDMI connection

  Qosmio X 70-A-12 X - Windows 7

  I have tried everything regarding this issue, lost 12 hours of research and asking everyone... I hope that you will give me the answer. I tried to install the drivers for different processor, Intel based, each time nothing, I have a controller, video, audio and Conexant smartaudio HD game.

  I also tried letting windows install their own driver. Windows Media Monitor... I have this case HDMI is shown but gray color, as there is nothing plugged. When I click Properties it says that everything is ok and active... so thank you for reading this. If you know another way to activate the sound via HDMI, I would be very grateful.

  PS - I picture on HDMI, but no sound.

  Thank you!!! :)

  Hello

  I checked the Toshiba download page and I can see your Qosmio machine is supported for Win7 64 bit and I think that you are using this version.
  I see ago offered all the important factors like driver chipset driver driver sound or display, so I hope everything works out well and there is no reason for experiences drivers.

  I would like to know if there is a problem when you use your machine without connect anything to it? is everything is OK with the material? You hear the sound on the internal speakers or headphones?

  To your HDMI issue: can you please explain what you are trying to do exactly?
  Are you trying to use your Qosmio with TV or what? When you open the properties of the sound > playback devices have tried to activate the listed device output digital (HDMI) and set its default value?

  By the way:
  Click on the volume icon in the taskbar and click mixer.
  Digital output is listed here? Check it out in the operative part of the option. Make sure that is not set to mute.

  Play a little with all these settings to make sure that everything is OK.

• 800-002-a Phoenix envy: no sound on the desktop computer running Windows 10

  The Bureau uses the built-in IDT High Definition Audio Codec 92HD68E2 and there is no audio output from the headphone plug at the top of the ports page e/s or one of the two audio ports - speaker audio or audio line-out. I tested the speakers and the headphone on other devices and they work perfectly, so either making detection doesn't have or the problem is deeper than that.

  I tried without success to the following:

  1. Uninstall and reinstall the audio codec;
  2. Uninstall and remove the audio codec, then download and put it back in place.
  3. Open the sound control panel on the taskbar to see what shows on the Read tab - that is to say:
  • The speakers/headphones and headset Communication going from "not connected" to "ready" when headphones are connected to the headphone jack high. No sound in the headset
  • There is no change in the display when the speakers are connected to the audio ports.

  The only sound I get is a second monitor with internal speakers connected by a DVI cable. The problem may be related to the upgrade of the OS from Windows 8.1 to 10 but I can't be certain that I have not really tried to listen to audio files from the upgrade. Any help I can get would be most appreciated.

  Hello:

  See if the audio driver IDT W10 works for you...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

  If the driver above does not either, there is workaround that you can try to get at least the noise at work...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. Select IDT High Definition Audio CODEC under this category.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  A warning message may appear, but click Yes.

  7 Windows has updated your driver software.

  8 restart the PC.

  The key is step 6.

• No sound after the takeover by Satellite C50 - from standby or sleep

  I had downgraded the C50 Toshiba Windows 8 for Windows 7 64-bit and downloaded all the drivers linked from Toshiba's web site, but there is no sound on the phone, after that I have to put the computer on standby or into hibernation. The sound on the right corner icon is present and active.

  I already uninstalled the audio driver in the Device Manager and rebooted the computer.
  This work of t n.
  Also I tried to install a new version of the audio driver Toshiba s website again, once again, no noise.

  If I do a full stop down or restart the laptop the sound is back to normal. Sometimes it is not as well...

  I didn't start-> Run-> enter services.msc. Check the status of the Windows Audio service is started.
  but once again, NO HELP.

  All windows updates are up to date. 7(64bit) is: Windows Ultimate SP1

  I have all the virus scan of the computer, he found nothing.

  I rang Toshiba customer support, they ask for 45 pounds (GBP) to pay for technical assistance.
  It is the stupid things that technical support is payable even though this computer is only 3 weeks.

  Can someone help me then?

  Hello

  What audio device is set as default in Control Panel-> sound-> tab reading after that the system wakes up from mode sleep?

  Check if the speakers are set by default.

  But to be honest, I think that the reading already tab settings are set correctly.

  In my opinion, you must reinstall the entire system once maybe that something was wrong during the first installation, who knows that everything is possible.

  After the new Win 7 installation ensure that the ITD and Toshiba Audio Enhancement Utility and DTS Studio sound driver are installed correctly.

• Satellite L650 - 13 M - high sound under the touchpad

  Hello

  When I work with my laptop, I hear a sound of high light (as you may know an insect repellent, just a little louder). It's not very loud, but it can be really annoying. If you listen closely from below, you can see that it comes under the touchpad. Does anyone know what makes this healthy and how I can possibly solve the problem?

  Thank you very much

  Post edited by: wokhog

  Hello

  It is difficult to tell what this sound can be, but I read on similar sounds from the faulty power supply.
  To be honest, I m not a L650 owner but maybe you should get in touch with a local ASP which could check the hardware and could find a reason for this high sound ground.

  Good luck

• Pavilion dv3500: STATIC SOUND during the OPENING of MOVIE MAKER

  Hi good day!

  When I opened my Windows Movie maker, all that audio recordings of my laptop becomes static, I can't even find a better way to solve this problem, I think I need an Audio encoder. Kindly help me with my problem. Hoping faster responses. Thank you.

  Hello @Trafalgar_Law,

  Welcome to the Forums of HP Support!

  I read your post on the sound and wanted to help!

  Are you just having this noise problem when using Windows Movie Maker?  If so, try to uninstall and reinstall the program.  Alternatively, you can try to use Windows Update, to search for the drivers that are compatible with Windows 10.  You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• Satellite P500 - cannot get sound through the HDMI to the TV

  Hello

  my system is a P500, win7 64 bit, ATI Mobility Radeon HD 4500/5100 Series video card, 4 meg RAM.

  I can't get sound via the HDMI to the TV,
  I've updated all the drivers.

  There is also no noise from interface SPDIF playback devices, it says Conexanant SmartAudio HD ready. Computer laptop speakers and headphone works.

  See you soon.

  Hello

  SPDIF or digital audio (HDMI) output is visible in Control Panel-> Sound-> tab reading?

  If so, mark this device as * default * and test the sound of the TV again.

  Greetings

• Equium L40 - lost sound in the headphone

  Hi, hoping someone can help.

  My current audio driver is Soundmax Integrated Digital HD Audio. And from what I remember forever. I downloaded it several times on the Toshiba site for my computer and it always comes back to this driver.
  The problem I have is that somewhere along the line he lost his in the helmet. I can say is if I have a hardware problem or if the plug is broken. I installed Windows 7, but the problem was there when I got the original program of Vista installed.

  A few things, my system tells me (not sure if it helps)

  Location 0 (internal high definition Audio Bus)
  C:\Windows\system32\drivers\ADIHdAud.sys
  C:\Windows\system32\drivers\drmk.sys
  C:\Windows\system32\drivers\portcls.sys

  If I can't solve this problem because it's taking someone can tell me of another line to listen to I could use please? possibly to USB.

  Thanks for reading.

  Hey Buddy,

  You hear the sound through the internal speakers?
  This means that the problem is that the headphone jacket?

  I think that if the internal speakers work but not the external speakers or headphones that it seems to be a hardware problem. You also verified that the windows audio audio output port settings?

  In the worst cases, you need professional help of an authorized service provider. Here is a list of them:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite L650 - no sound on the TV using an HDMI cable

  using a HDMI to connect to the TV picture cable works fine but no sound through the TV, sound out of speakers to computer. How can I configure so sound comes through the TV?

  Hello

  Usually it should automatically work but try it please check the settings in the sound properties > reading.
  Switch off the speakers and turn on the digital audio device (HDMI).

• Cannot hear the sound of the TV after connecting via a HDMI cable

  Original title: sound on tv

  I was able to hook the hdmi cable to the computer laptop & tv and watch movies on tv. Now, for some reason I can't hear the sound on the tv more, the sound from the laptop only.  How can I fix?

  Hello Monica,.

  -What operating system is installed on the computer?

  If you have installed Windows 7, you can read these articles and check if that helps.

  Connect your computer to a TV: http://windows.microsoft.com/en-us/windows7/connect-your-computer-to-a-tv

  Sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/sound-cards-frequently-asked-questions

  Thank you.

• No sound from the Clip when it is connected to the car charger and car s in the

  I just got a car charger for my 8 GB Clip. I have the Clip connected to the connector of the car aux in, and it plays beautifully this way.

  However, when I connect the car charger, which is a fact by Motorola for a mobile phone, the sound of the Clip completely stops.  There is no sound at all.

  Even if I barely touch the metal of the car charger USB plug to the USB port of the clamp, the sound cuts.

  A ground loop isolator would correct this problem? The comments that I have read of these say all that they helped with motor and alternator noise, but I don't have that.  I have no sound at all, even if the Clip is loaded and he continues to play according to the display of the item.

  I checked the car charger works well because I have a box of jump with a record of 12 VDC (just like in the car).  The cool Clip and plays with a helmet with the Motorola car charger in this configuration very well.

  Any ideas what is wrong and how to fix it?

  Thanks in advance.

  Just for this follow-up, the ground loop isolator completely fixed the problem I had with the sound cutting on my video in the car.

  The one I chose was the PAC SNI-1/3.5 RCA noise filter.  He goes online with 3.5 mm cable to the and has a socket on one end and a plug on the other.  It would have been cool if he had just had two male connectors, because then I could have plugged one side in the Clip and the other in the input of the car Jack.

  There is no significant deterioration in the sound, and now I can load the Clip while listening.

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• No sound on the imported .mov files

  Since WMP on Vista does not recognize the .mov file formats I had Dell technical support install pack of 495 s K-lite codec. Now I can open and read files .mov (imported from a digital camera KODAK Z710), but there is no sound. The speakers are very well, all the other videos from the internet do not have an audio problem, nor play CD and DVD have audio problems. Only files .mov that came from my camera do not play sound. Dell support diagnosed my computer and it works perfectly diagnosed. They said that it is a problem of 3rd party. I spoke in support of KODAK, but they can not help me with a computer problem. BTW, his play on the camera itself.
  I am at a loss. I have been around surfing the net for hours and hours, but did not finde any solution, just many similar problems.
  Nobody knows how to solve this problem without me needing a degree in computer science? Thank you.

  Since WMP on Vista does not recognize the .mov file formats I had Dell technical support install pack of 495 s K-lite codec. Now I can open and read files .mov (imported from a digital camera KODAK Z710), but there is no sound. The speakers are very well, all the other videos from the internet do not have an audio problem, nor play CD and DVD have audio problems. Only files .mov that came from my camera do not play sound. Dell support diagnosed my computer and it works perfectly diagnosed. They said that it is a problem of 3rd party. I spoke in support of KODAK, but they can not help me with a computer problem. BTW, his play on the camera itself.
  I am at a loss. I have been around surfing the net for hours and hours, but did not finde any solution, just many similar problems.
  Nobody knows how to solve this problem without me needing a degree in computer science? Thank you.

  ========================================
  Windows Media Player is not a good choice to play .mov files.

  .mov is the Apple QuickTime format... so would be the best player
  Apple Quick Time player being... I suspect a copy provided with your
  camera.

  The free VLC Media Player can also be worth a try.

  VLC Media Player
  http://www.videolan.org/

  Best bet IMHO... convert the .mov to .avi using the free Panzera
  MOV to AVI. Then you can read the files in most of the media
  Player and if you ever decide to use Movie Maker, they'll work here
  also.

  Pazera Free MOV to AVI Converter
  http://www.Pazera-software.com/products/mov-to-AVI-Converter/

  After you download... Open the program...
  (no installation required)

  Drag and drop one or several .mov files...

  Choose an output directory...

  Select... WMV AVI - Video Codec - version 1 (WMP 7)...

  Convert...

  John Inzer - MS - MVP - digital media experience