Import audio data across multiple slides (not all)?

Similar Questions

• L50-A-19N satellite can not read audio data from multiple sources

  I can't read the audio data from multiple sources. It is very annoying when I have 2 youtube videos, playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 open media players and 1 youtube video playing, youtube video has no sound...
  It disappears when I plug my headphones...

  I already have all the latest drivers, the DTS driver was last updated was in 2014, his day of February of this year...

  
  
  
  
  
  

  25/02/14

  His Studio in DTS

  DTS Inc.

  Windows 8.1 - 64 Bit

  1.01.2700

  I don't know if this has the feel, but I had his most recent DTS driver that I found, it is not my laptop model, but they all seem to be the same - v1.1.88.0
  I uninstalled the DTS software and still had the same problem, then it is irrelevant on its driver somehow...

  
  
  
  
  
  

  02/10/15

  Audio driver

  Integrated Device Technology Inc.

  Windows 8.1 - 64 Bit

  6.10.6491.0

  Audio driver IDT has more recent release date, but the version of the driver is the same as the 2013 one...
  Why the older drivers of toshiba releaseing as 'NEW '?
  

  2nd is my Advanced settings speakers, nothing has changed when I disabled "allow applications to take exclusive control of this device.
  

  Sorry but I don't understand your problem.
  I tested it on my machine and if I start the music on three different sources (YouTube, player, web radio) I can hear all together, but it makes no sense to listen to music from different sources.

  Or how do understand you?

• Audio broadcast to multiple slides

  I'm creating a software using the captivate demo and narration voice. The problem is, the program uses a lot of mouse input. Need me 8 clicks just to select a date, which creates 8 blades. I can live with the large number of slides, but my audio with slides synchronization has become a nightmare. I am looking for a better way to distribute my one sentence of audio across multiple slides. Can it be done?

  I am using Captivate 5.5 and is going to publish in the form of a SWF file.

  Yes, it can:

  1. Note the number of the slide where you want your audio files to spread.
  2. Go to Audio > record... > glide.
  3. When the dialog box Audio slides opens, either record your audio slides play in the preview window, or import the audio from another place of him have divided these slides.
  4. Adjust slide markers to meet.

• I can't import audio data into Flash pro Cs5

  I can't import audio data Flash Pro Cs5, I'm new to Flash pro and I'm working on an interactive story, I need audio that I download from incompetech.com. MP3s are fine and play in windows Mp3, but when I try to bring them into Flash I get a message saying that it can't import them and does not say why. I have looked at this but impossible to find an answer, I work with windows 7, flash Cs5 64 bits in actionscript 2.0 and I do not have a good editior just flash.

  -Thank you
  

  This usually means that there is a problem of sampling rate.

  Load your mp3 into a sound editor and then export it using the standard settings.

• How to play 1 audio MP3 on multiple slides in Captivate 5.5?

  Hi, I have a project in which I have several screen 'movies', and I've separated records MP3 audio for each film.  (I use a segment for example, however I have to do this several times) the audio is maybe 3 minutes long and must be played during the "screen" movie, which is about 20 slides for a long time.  To my knowledge, I must break the MP3 audio in the 20 pieces so that each slide has only a small piece of audio.  Or, is there a right way have the audio start playing at the beginning of the film "screen" and I'll just match the timing to the voice slides as he plays without breaking apart audio?  I am using Captivate 5.5 on a MacBook Pro.  Thank you!

  Hello

  Welcome to the Adobe Forums.

  How long is the Audio files?

  There is an option in Captivate 5.5 through which you can distribute your Audio files on multiple slides

  (1) right click (Control click on MAC) on the slide from which you want to start the Audio

  2) import-> Audio

  (3) you get a window, choose option 2

  

  (4) it will distribute Audio, depending on the length of the blades.

  Hope this helps!

  Thank you

  Vikram

• An Audio Clip to multiple slides

  Hello
  
  I've been using Captivate for quite awhile now. During the days of Captivate 2, I could take an audio clip that has been lasts 10 seconds, for example, place it on a slide, set this slide to be long, 1 second during the execution of the project, the audio would play in the following slides. Basically, it made things easier when you were explaining a concept and want to have project type in a field at the same time.
  
  My problem is that I could not reach this Captivate 3. Is there an audio setting that I'm not aware?
  
  Any help would be greatly appreciated.
  
  Thank you!
  
  Doug

  Hi Doug

  The option must still exist. I remember well, it's one that you choose at the time wherever you insert the audio clip. Since you seem not to be seen, I guess that your audio clip is the same or less time than the slide where you want to insert. It is key, as the audio clip should be longer than the slide on which you are placing it in order to display the dialog box. In addition, the slide cannot be the single slide or the last slide. After all, if this is the case, there is no other slides to use.

  Thus, when you try to use audio as long as the slide, you should see a dialog box with three options. The option first (or higher) simply tells Captivate to set the slide duration to match the clip.
  The second (or middle) option tells Captivate to open a different dialog box allowing you to choose where the clip will break the next day however several slides. And the third (or low) option tells Captivate simply insert the clip, leave any single timing and let it break through the other slides where he's going.

  You can also talk the option to edit the schedule for the whole project. To display this dialog box in Captivate 3, click the Audio > Edit Timing > project. Once this dialog box appears, you have little sliders that allow you to adjust where the audio breaks through the slides.

  I hope something here has been helpful... Rick

• Import audio data - window of Audio sync not opening during the audio broadcast on multiple slides

  Hello

  I am importing PowerPoint files in Captivate 4 with the view with audio recorded separately on top of these PPT Slides.

  The PowerPoint file and associated slides to import with no problems. When I import the audio in the timeline view, it treats the MP3 file without any problem and adds the audio file to the library and the first slide. I can get the window asking me how I want to import the audio, to shich, I select the audio acorss to distribute several slides option.

  In previous versions of Captivate, the Audio sync popup then appears to allow me to choose at which points to divide the audio between slides. Unfortunately the Audio Synchronization window does not appear.

  My system Details are as follows:

  -PowerPoint 2007 slides

  -Captivate 4

  -Windows 7

  No reason as to why this problem occurs?

  M.

  Hello

  Please try to open the Captivate as an administrator-

  Solution 1:

  1. go to the Captivate installation location. Generally, it is present here-

  C:\Program Files\Adobe\Adobe Captivate 4

  2. right click the "AdobeCaptivate.exe' and select 'run as administrator '.

  3. now try to run the same steps. It should work

  If this does not work, try the following set of steps mentioned below.

  Solution 2:

  Close the Captivate and try the following.

  1. Identify the location of cmd.exe. Usually found in C:\Windows\System32\
  2. Click right-click on cmd.exe > select run as administrator
  3. Launches the command prompt
  4. Now, go to the Adobe Captivate 4 installation location. In your case, it may be C:\Program Files\Adobe\Adobe Captivate 4
  5. Now, run the command regsvr32 NSAudio.dll
  6. Once you get a confirmation dialog box, run the next command regsvr32 WaveEditCtrl.ocx
  7. Again, you should get a confirmation dialog box.
  8. Now launch Captivate and try the same steps. It should work.
  Kind regards
  Mukul

  Post edited by: mvlele

• After the update to 2015.3: offline, after locating media: not able to import audio data

  Hello

  I've just updated to 2015.3 CC this morning, and after that, almost all circles in my projects are offline.

  It seems to me like a codec is missing. How to fix this? (And why the codecs are missing after an update?)

  When I try to locate the media I'm not able to import the audio "selected file does contain no audio media used by clip references...". "etc etc. Of course there is audio. And yesterday, everything worked very well.

  Now I am in trouble: working on a one hour documentary is expected to be completed this weekend!

  I have

  Windows 10

  AMD Radeon R9-270

  (which, I say it once again, worked perfectly until this update)

  So, what to do now? I have to make it work...

  Hi, sorry for my English, I solved this first remove what hides your real all this files where you have actually sent. Then go to

  C:\Users\YOUR WINDOWS USER \AppData\Roaming\Adobe\Common and delete all the files inside:

  Be cached anywhere

  Media cache

  Media cache files

  PTX

  then change to a new location of your cache files in the PREFERENCES / MEDIA

  then just reopen your project and wait for files compliant and that is all...

• Import the audio files I have are not all sounds...

  so I imported the music, but when I try the previewed image, I don't hear anything. How can I fix it?

  Your warning traced the beam shows that you don't have a card Nvidia installed or configured correctly. Standard comps will make very well.

  For other questions please start with Basic Workflow, a series of 3 videos that shows how AE, or visit this link from the homepage of this forum: AE Basics

• Panasonic P2 import - audio problem of multiple files

  Hello

  I have a problem with MXF Panasonic P2 in first CC 2014 files. We have an a video in 3 parts (3 files on the disk). When I import video ago only audio of the first file. The video is OK. The rest of the clip is without audio. When I import the same clip in the first CC (7.0), everything is OK.

  Hello again,

  I tried record new file to test in the camcorder this morning (1 clip = 5 files on the P2 card). After you ingest using prelude CC 2014 (3.0), its OK there.

  Could be a problem caused by the previous ingest using prelude CC (2.0) and editing using first CC 2014 (8.0)? Could not be here any incompatibility with Prelude CC (2.0) and first CC 2014 (8.0)

• Copy of a slide with a 'model' for the buttons to show and hide across multiple slides

  Here's my problem... I'm going through many different products that each have a similar style click on each slide.  The user can choose from 5 different catergories, when you click on one of the 5 buttons it shows the appropriate text box and hides one of the other visible text that can be opened from clicking on any other category.  When all the 5 keys were pressed game re bar appears allowing the user to continue.  It works just like a champion on a slide.  Here's my problem, although I need to duplicate this slide about 200 times.  When I duplicate, the name of the element in the text boxes so any change so my actions advanced making hide / display is no longer working.  Do I really have to create a new tip action for each text box for each slide with a unique name for the element? (I know that I can't have the same text on several slides box item name... at least I don't think I can).  I can do this, but there must be a quicker way?  What Miss me?

  I am using Captivate 5.5

  Very brilliant way to beat the system, I am impressed.  A problem, however, the text box must have a gray background to make the text readable, and for some reason when the variable positions within the text are it is overlooking the sid on the left of the box by a character.  Everything else seems to fit but not that. See slide below and the "Drytime" box to the right illustrates my problem.

  

• How to import audio data in character animator?

  Hi, I'm trying to use character animator to automate the movement of the mouth of my videos of stop motion.  I figured out how I wanted to set up the mouths and everything, but I can't import my voice on audio file into the project.  Could you please tell me how to import an audio file in the host for the lip sync?  Is this posible or you save the application (which is very annoying).

  Thank you for your time,

  Justin nifong

  You can import the audio as you import any file (File/Import)

  Then drag it to the stage, select the puppet desired, then go to object/calculation Lip Sync of Audio scene

• import audio data

  Host of character is a true game-changer-bravo! Is it possible to import an audio clip in the timeline of Ch? This would allow voice to record professionally. Then, the host would simply mouth as well as the track during the recording of a puppet show. Thank you

  And to get the audio, use file > import... and import .wav or .aiff files.

• Import from Lightroom 6 detects only not all files

  I try to import a folder of images in Lightroom and it seems to turn off without problems or error messages, but when I check the number of pictures is not. There are 398 (JPG, NEF and a MOV) files in the network folder, I'm importing. But Lightroom shows 367. It seems to be jumping random jpg. I deselected "don't import suspected duplicates." I tried to drag and drop files missing in the library, but it brings just to the top of the import and shows dialog box then 0 new. What is happening and what I can do about it?

  Some of the missing files who refuses to recognize Lightroom exist and the file starting at the bottom:

  

  What I see in Lightroom:

  

  In lightroo preferences check "treat JPEG files next files to raw as separate photos»

  

• Can you share a store of data across multiple Clusters?

  I was wondering if you can share a data store through multiple clusters with no locking problems. Unique data center, but several Clusters (Esxi 4 and 5). LUN to be shared between the Clusters are VMFS3.

  A few pros and cons can be found in the statutes...

  http://www.yellow-bricks.com/2010/02/05/storage-masking/

  http://www.yellow-bricks.com/2012/09/21/say-goodbye-to-the-transfer-LUN-aka-swing-LUN-aka-stepping-stone/

  Concerns would be a condition of ODA impacting more of 1 bunch, so the ability for a declared LUN from several hosts of multiple clusters.

  The original use case as a swing-LUN for the migration of virtual machines between clusters, but that is no longer necessary in vSphere 5.1 with enhanced features of vMotion.

  HTH

  Cormac