Audio broadcast to multiple slides

Similar Questions

• Import audio data - window of Audio sync not opening during the audio broadcast on multiple slides

  Hello

  I am importing PowerPoint files in Captivate 4 with the view with audio recorded separately on top of these PPT Slides.

  The PowerPoint file and associated slides to import with no problems. When I import the audio in the timeline view, it treats the MP3 file without any problem and adds the audio file to the library and the first slide. I can get the window asking me how I want to import the audio, to shich, I select the audio acorss to distribute several slides option.

  In previous versions of Captivate, the Audio sync popup then appears to allow me to choose at which points to divide the audio between slides. Unfortunately the Audio Synchronization window does not appear.

  My system Details are as follows:

  -PowerPoint 2007 slides

  -Captivate 4

  -Windows 7

  No reason as to why this problem occurs?

  M.

  Hello

  Please try to open the Captivate as an administrator-

  Solution 1:

  1. go to the Captivate installation location. Generally, it is present here-

  C:\Program Files\Adobe\Adobe Captivate 4

  2. right click the "AdobeCaptivate.exe' and select 'run as administrator '.

  3. now try to run the same steps. It should work

  If this does not work, try the following set of steps mentioned below.

  Solution 2:

  Close the Captivate and try the following.

  1. Identify the location of cmd.exe. Usually found in C:\Windows\System32\
  2. Click right-click on cmd.exe > select run as administrator
  3. Launches the command prompt
  4. Now, go to the Adobe Captivate 4 installation location. In your case, it may be C:\Program Files\Adobe\Adobe Captivate 4
  5. Now, run the command regsvr32 NSAudio.dll
  6. Once you get a confirmation dialog box, run the next command regsvr32 WaveEditCtrl.ocx
  7. Again, you should get a confirmation dialog box.
  8. Now launch Captivate and try the same steps. It should work.
  Kind regards
  Mukul

  Post edited by: mvlele

• How to play 1 audio MP3 on multiple slides in Captivate 5.5?

  Hi, I have a project in which I have several screen 'movies', and I've separated records MP3 audio for each film.  (I use a segment for example, however I have to do this several times) the audio is maybe 3 minutes long and must be played during the "screen" movie, which is about 20 slides for a long time.  To my knowledge, I must break the MP3 audio in the 20 pieces so that each slide has only a small piece of audio.  Or, is there a right way have the audio start playing at the beginning of the film "screen" and I'll just match the timing to the voice slides as he plays without breaking apart audio?  I am using Captivate 5.5 on a MacBook Pro.  Thank you!

  Hello

  Welcome to the Adobe Forums.

  How long is the Audio files?

  There is an option in Captivate 5.5 through which you can distribute your Audio files on multiple slides

  (1) right click (Control click on MAC) on the slide from which you want to start the Audio

  2) import-> Audio

  (3) you get a window, choose option 2

  

  (4) it will distribute Audio, depending on the length of the blades.

  Hope this helps!

  Thank you

  Vikram

• Import audio data across multiple slides (not all)?

  Is it possible to attach audio to multiple slides (not all) as described? If so, how?

  Slide 1: no audio; text communicates that this module will have audio, so the viewer must prepare by plugging in the headphones. Click the start video button when you're ready. Goes to the next slide.

  Slide 2: Audio Music begins (object) and audio narration between a few seconds later, registered to the slide. Slide Intro ends, audio fades.

  Slide 3-30

  Each slide has voice told to drag. I would add a SECOND file of music playing in the background to all slides #3-20.

  Slide 21-23: original music played on these blades, each with voice told at bottom.

  Thank you very much.

  What version?

  Some ideas: music for the file, stop on the slides 1-2 and 21-23 background.

  VO as slide auido on slides where wanted.

  For slide 2: audio object that can play alongside the original Version (see http://blog.lilybiri.com/audio-objects-control-them)

  For slide 21-23: audio object with the object displayed for the rest of the project and hidden at the entrance to slide 24

  Lilybiri

• An Audio Clip to multiple slides

  Hello
  
  I've been using Captivate for quite awhile now. During the days of Captivate 2, I could take an audio clip that has been lasts 10 seconds, for example, place it on a slide, set this slide to be long, 1 second during the execution of the project, the audio would play in the following slides. Basically, it made things easier when you were explaining a concept and want to have project type in a field at the same time.
  
  My problem is that I could not reach this Captivate 3. Is there an audio setting that I'm not aware?
  
  Any help would be greatly appreciated.
  
  Thank you!
  
  Doug

  Hi Doug

  The option must still exist. I remember well, it's one that you choose at the time wherever you insert the audio clip. Since you seem not to be seen, I guess that your audio clip is the same or less time than the slide where you want to insert. It is key, as the audio clip should be longer than the slide on which you are placing it in order to display the dialog box. In addition, the slide cannot be the single slide or the last slide. After all, if this is the case, there is no other slides to use.

  Thus, when you try to use audio as long as the slide, you should see a dialog box with three options. The option first (or higher) simply tells Captivate to set the slide duration to match the clip.
  The second (or middle) option tells Captivate to open a different dialog box allowing you to choose where the clip will break the next day however several slides. And the third (or low) option tells Captivate simply insert the clip, leave any single timing and let it break through the other slides where he's going.

  You can also talk the option to edit the schedule for the whole project. To display this dialog box in Captivate 3, click the Audio > Edit Timing > project. Once this dialog box appears, you have little sliders that allow you to adjust where the audio breaks through the slides.

  I hope something here has been helpful... Rick

• Audio on multiple slides in Captivate 5

  I'm new on using Captivate 5 and I am trying to record audio in Captivate that will play everything ahead of 3 slides on their own.

  I read something on a thread which spoke by clicking a "slide divider" - I can't find the 'slide' divider and on a 'distribution window' opens once I have record audio - who never appears.

  Can someone help me with this?  It seems it should be easy to find.

  Thank you

  Emily

  Hi Emily,.

  You can record audio to 3 slides in different ways.

  Option 1:

  You can record audio individually on all three slides by invoking the audio for each slide slide dialog box.

  1. on each slide you want to save the audio call audio slide dialog box (Audio > Record to > Slide) and record for the single slide. Record audio recorded will add it to the slide that you have recorded.

  2. you can follow step 1 for all three slides that you want to save.

  Option 2:

  You can record audio for all the slides in three continuous only once. You can do this in the audio SLIDES dialog box

  For ex if you want to record audio for slides 1, 2, and 3, then select slide 1 and call the slides audio audio dialog box > Record to > slides

  You get a "Record of Slide" dialog box. Enter slide numbers for which you want to record audio, and then click ok.

  This will open the audio slides dialog box.

  Dialog box audio slide shows the slide selected in the dialog box "Record of slide. Enable "streaming" and "SWF Preview" and click on the record button. It will record audio on three slides that tell you. Audio will be added to all the slides in three. You can see the preview Movie (SWF) or the slide number, mentioned in the upper right of the preview pane for the number of the slide you are saving to.

  If some parts of the audio is filled with the next slide, then you can organize the markers in the EDIT tab. Here you can play audio and pause at the place where you want your next slide to start and click on the button highlighted by Lilybiri. Its called the 'Start next slide here' button.

  Once the recording is done, click SAVE to add audio to all three slides.

  Try these and let me know if it works.

  Remi - Ashwin B

• How to delete a slide and join its audio to a previous slide

  Hi all

  I just started using Captivate and I'm trying to edit a record of captivate and found that Auto has created a lot of slides, I don't want to have in my presentation (such as 30 slides that have been generated for a flashing button). I recorded a live session with multiple users, audio narration recorded presentation files are now linked to the slides.

  What I would really like to do now is, multiselect all the slides, I have need, delete them and at the same time to fix all of their audio files to the previous slide.

  And if this is not possible, I would also welcome with another way to achieve what I need - the addition of the audio from the other slides in the first of this series.

  Please enlighten me ;-)

  Kind regards

  Holger

  Hello

  You must first identify the audio clips. Remove the slides you want. Then, you could probably edit audio for a slide (or the previous slide to deleted ones) and edit audio. Note that when mounting audio, you have the possibility to insert audio extra during the editing process by using the button in the library. This is noting the clips on slides that have been deleted would be useful. You can find them in the library and bring.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Create a theme that, when selected, open multiple slides

  I can create a theme using Keynote 6.6.2-no problem. I can record on the theme selector, no problem.

  However, I would like to create a theme, which, when it is selected in the theme selector, open several slides prepared in advance, not only the title slide, in the presentation that results.

  I tried, but nothing seems to work.

  Anyone know if this is even possible? And if this is the case, how it's done?

  Thank you.

  I don't know if it is possible as a theme however keep a Keynote presentation with multiple slides pre-established appropriate can do what you want.

  If mark you as an element of Stationery Pad (via Get Info Finder), it should open as a copy so that you don't accidentally destroy your master.

• L50-A-19N satellite can not read audio data from multiple sources

  I can't read the audio data from multiple sources. It is very annoying when I have 2 youtube videos, playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 open media players and 1 youtube video playing, youtube video has no sound...
  It disappears when I plug my headphones...

  I already have all the latest drivers, the DTS driver was last updated was in 2014, his day of February of this year...

  
  
  
  
  
  

  25/02/14

  His Studio in DTS

  DTS Inc.

  Windows 8.1 - 64 Bit

  1.01.2700

  I don't know if this has the feel, but I had his most recent DTS driver that I found, it is not my laptop model, but they all seem to be the same - v1.1.88.0
  I uninstalled the DTS software and still had the same problem, then it is irrelevant on its driver somehow...

  
  
  
  
  
  

  02/10/15

  Audio driver

  Integrated Device Technology Inc.

  Windows 8.1 - 64 Bit

  6.10.6491.0

  Audio driver IDT has more recent release date, but the version of the driver is the same as the 2013 one...
  Why the older drivers of toshiba releaseing as 'NEW '?
  

  2nd is my Advanced settings speakers, nothing has changed when I disabled "allow applications to take exclusive control of this device.
  

  Sorry but I don't understand your problem.
  I tested it on my machine and if I start the music on three different sources (YouTube, player, web radio) I can hear all together, but it makes no sense to listen to music from different sources.

  Or how do understand you?

• coordination of audio to record and slide

  Dear community!

  What is the (easiest) way to coordinate an audio recording and a slide, if there are a lot of items on the slide and I want items appears, just at the moment where I am at some point of the audio recording? I can coordinate the elements of time, but I want to make it very carefully.

  Sincerely

  Thomas

  My workflow:

  • Add the audio excerpt of the slide and all objects.
  • Select the objects that should be moved for a while.
  • Use Play slide (play button on the timeline or just the space bar)
  • Stop when the time is reached (use SPACEBAR)
  • Use CTRL-L to align the start of the object selected at this time there
  • Select the following objects.
  • Use the SPACEBAR again to continue...

• audio playback on some slides, and not on others

  Using Captivate 6, when I saw or publish my project, I have intermittent problems with the audio does not. For example, if I saw a project, I find that the slide 3 audio does not play, but audio on all other slides is good. To address the problem, I have delete and add a link to the audio file of this slide (slide 3). When I go to preview the lesson once again, slide 3 audio works, but now slide 5 plays the audio. It is very intermittent and extremely frustrating.

  I came this morning, had the same problem. I restarted my computer and everything seems to work properly. Published the draft without any audio problems.

• Progress bar when audio plays on a slide with the button

  Hello

  I use 6 Captivate.

  I have a zipper opening for my demo that introduced the demo. This slide contains 1-3 minutes of audio. On this slide, I have a standard button named 'Start', that the learner must click Start the demo (which is on the next slide). I also have a PlayBar with rewind, Play/Pause, Back, Next buttons and Audio.

  Once the project starts, the Play/Pause button on the playback bar turns into mode 'Play '. This, I believe, is an expected behavior because of the presence of the 'button '. However, it causes me problems because, if the learner clicks on the 'Play' button (instead of the start or next buttons) after the end of the audio to the slide of the opening, the progress on the playback bar bar moves for the duration of the audio, so that nothing changes on the screen.

  Is it possible that I can:

  1. Move the progress bar with the button Play/Pause in "Pause" mode when opening, slide audio playback and switch to 'Play' mode once the audio ends? In this case,.

  a. If the learner pauses the audio by clicking Pause and then click on Play, it must continue with the audio.

  b. If the student click on the play button after the audio ends must take sound to the next slide.

  2. turn off the Play/Pause button so that the learner will not click on it?

  I don't want to hide the PlayBar on this slide as I want to give the Rewind option to the learner so play the audio again if he / she wants.

  Anthony

  A colleague found an easier solution than the one I was talking about earlier.

  He just moved the point to pause the start until the end of the slide button. Now, the progress on the playback bar bar moves with audio and the Play/Pause button passes in "Play" mode when audio stops at the end of the slide. On clicking the play button, the project will move to the next slide.

• Last slide audio plays in the slide before him!

  I am using Captivate 5. I have a quiz in my project, and the quiz results page is the 2nd to the last slide. After this slide is a certificate. Users get only to this slide from the slide of test results once they have passed the test. If they had failed the quiz, the quiz results slide shows the Retake Quiz button and it brings the user to the first question of the quiz.

  The problem I have is with audio. The last two slides both have audio. When a user is on the quiz results slide, the audio so that it plays, but then he goes on to play the audio for the certificate drag regardless if the user spent or not. It's only the audio which is undercover. I don't know what to do.

  My quiz is on the answers (because I don't want their scroll ahead to the answers and explanations). Pass is located to go to the next slide, which is the slide of certificate. Failure is set back to the 1st question slide.

  All this experience? Otherwise, I think that my only recourse is to remove the audio from the last slide.

  Hello

  Try to second donner.1 of the additional slide after the audio in the timeline duration, see if that helps. Otherwise you can give it as an object of a legend of transparent text on the slide audio. Let me know if any of them would help?

  Thank you

  Vish

• CP6 - need to add an audio button on quiz slides to "read aloud the question."

  CP6 - need to add an audio button on quiz slides to "read aloud the question." Most of our target audience is younger (grade 1-5) and provide more accurate results, if each question is 'read' for them. Of course there are big players in the Pack, but the option should be available to listen to the question and not have to read it. Therefore, there is a button to trigger the audio on every issue. Ideas?

  You don't need a button. Just add a legend of the question bearing slides a sound add you the portion of the legend. You can hide the legend by making it transparent.

• Two audio files in a slide?

  I want to be able to record my voice and import background music for a slide. I don't want to use the functionality of 'mood music' Captivate because music has to change on each slide.
  Is my only option mix both together outside Captivate files and bring them as a single file?
  Kind of silly to have to go through the additional work. Why not just have to ' audio track in the slide editor?

  Hi again Keith

  What you can do is to insert an object into the slide and set it to audio. Perhaps a legend of transparent text and wordless. The legend appear (but invisible) and the audio would play.

  Maybe that help you to achieve the desired results?

  See you soon... Rick