Import FLV - Compression file not recognized error!

Similar Questions

• compressed files not recognized by Windows 7

  I just some of the files compressed into one right click on files by selecting send to... Compressed (zipped) folder. He was a "Compression". "info displays and it seemed that the files were being compressed. However, once the compression has been completed, the displayed icon looks more like a page of paper (not the folder with the zipper) and when I try to open the file, I get a system request to find a program to open this file. Why does my system feel. ZIP files unrecognizable and, more important still, how to solve the problem? I am running Windows 7 Ultimate SP1 and there is no other utility compression installed on this machine.

  Thank you

  John

  Try...

  1. Open the Menu 'start '.
  2. Click on "all programs".
  3. Expand "Accessories".
  4. Right-click "Command Prompt", select "Run as Administrator"
     [If Windows 7 - you will be asked if you are sure that you want to open the administrator command prompt, select Yes.]
  5. From there type:
     cmd /c assoc .zip = CompressedFolder
  6. Press ENTER.
  7. Close the command prompt.
  8. Restart the computer.

  Not better?

• Unable to play the purchased songs iTunes - original file not found error?

  Unable to play the purchased songs iTunes - original file not found error?

  It just happened spontaneously in isolation or is there more background about what you did?

• Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Hi Rose

  Refer to the troubleshooting error messages | CS5, CS5.5 bootstrapper

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

  I hope this helps.

  Thank you

  Varun

• File not found error in the Welcome screen

  Help please!

  I have the exact problem described below, but do not have a folder with the same name as the volume created on the volume. Please can anyone help - I have tried everything. This problem happened when I upgraded to Fireworks CC!
  

  "At the launch of Dreamweaver on your Macintosh if your home screen does not load and you see an error"File not found", please check if you have a folder with the same name as your volume created on the volume. For more information about this event through the pdf document attached. Other dreamweaver dialog/panels that will be empty because of this problem are Jquery color chart, Adobe Edge Webfonts tab in the dialog manage fonts, dialog error W3c information, dialogue externalize Javascript and svn revert dialog. After having made changes indicated in the attached document, please check all the dialogues/panels affected to confirm that everything is working as expected. »

  Thank you

  This problem has been resolved by renaming current Martin of the Volume of work. The reason to get the "file not found" error in the case of Martin is because there is a folder inside the current workload that has the same name as the Volume itself (the name of the "system" folder. Please refer to the screenshot above).

  @cabolivar, can you please check if you have any folder in your root folder which has the same name as the name of current workload? If it's confusing, please post a screenshot as Martin. Try out us and solve it for you.

  Thank you

  DBC

• .zip files not recognized in Windows 7

  When I had problems with Windows 10, I've restored Windows 7 on my HP laptop.  . Zip files are more recognized on my laptop.  Before the upgrade to Windows 10, I had the opportunity to unzip and zip files.    The extension of the .zip files is no more listed in the types of files accessible from the control panel.

  I tried to download WinZip, and it would allow me to compress, but not unzip files.

  Can anyone offer suggestions how to solve this problem?

  Not sure, but take a look on this page - http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html and see the association of ZIP file, that peut help if all goes well.

• DVD player not recognized; error code 10

  Our Museum has a Dell Optiplex 745 on which the XP operating system has been replaced by Windows 7 Professional.  The DVD drive is not recognized, and the error code 10 stipulates that the driver could not be loaded.  I tried upgrading the driver online, but I was told that the driver installed is the right one for this player.  If I remove the drive with the machine on, uninstall the driver, stop and then restart and then restarting to reinsert the DVD, the computer recognizes the drive and install it and it works.  When you restart the computer the next morning, the car disappeared again.  Would appreciate any help I can get!

  Thank you!

  Werner Horlbeck

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• USB not recognized error message on the use of the memory card.

  Hi ALL,

  I have a question that my memory card is not supported in my phone. It shows the preparation to installation but after that, there is no progress as (media analysis) as do other smartphones.

  When I use this memory card on my laptop, it shows for a while, but on opening any file it is closed and shows USB device not recognized.

  Someone, please help, is possible to fix this or my memory card is corrupted (impossible to use now and further).

  Hello

  Other cards work properly on this computer?

  This card works fine on other computers (not to mention that the phone)?

  Remove the card from the computer - set aside for a bit (at least a few minutes) - pending
  Restart the computer - once it is running re - insert the card. Then - click right on the
  Lead check file - check for properties - tools - errors - drive Explorer.

  If this help not the card is probably defective (assuming that other cards work in the drive so
  the drive is not defective). In some cases the data can be retrieved from a card however is it expensive.
  Check with a real computer store and online.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Nikon D5 and NAVE D500 files not "recognized by the raw format support in Lightroom"

  Hello

  I have a Nikon D5 and a D500 and I downloaded and update my Lightroom CC only 2 weeks ago on my MacBook Pro 2015. I just tried to update again, and he said his day. However, when you try to import NEF files in Lightroom the following message is displayed:

  "The files are not recognized by raw format support in Lightroom.

  

  Help, please!

  Kind regards

  Zhayynn James

  Two devices require at least 2015.5 CC in Lightroom.

  Devices supported by Camera Raw

  Please confirm which version of Lightroom you run

  Lightroom > on Lightroom

• Files not recognized by management of raw in Lightroom

  Last week, I bought a new Canon D 760 and I fired the first shots with it yesterday. I shoot in RAW and JPEG.

  I always edited my previous camera RAW photos in Lightroom 5. I also wanted to do this with the new camera, but still the same error message appears here on: "files are not recognized by the RAW format support in Lightroom.

  I tried to update and it is also successful, but I get this error message.

  
  

  Y at - it a (free) solution for this or am I obliged now to update Lightroom 6?

  I read that I can use a DNG Converter, but I would have preferred to edit RAW files directly.

  My apologies for my bad English, I'm Dutch.

  Hi tineg,.

  The only way to directly edit the RAW images is upgrading to Lightroom 6 as Canon D 760 files are supported in Lightroom 6 and above version.

  Reference Article: cameras supported by Adobe Camera Raw

  Kind regards

  Claes

• SCO to Connect downloaded .zip file, not recognized?

  I'm working to articulate scenario 2, packing as a swf/html5 compatible with OCS using SCORM 2004 v.4. When I test the file to SCORM Cloud, the manifesto is good and the project runs without problem. When I take the same file and attempt to load the system to Connect, an error - "file format not recognized" I don't know where to go with this - the articulated site and this site contain no instance ther of this question - anyone? anyone? Bueller?

  Success - not with scenario 2 - that's another story altogether - but we got the boss to the junk food she and we launch Cp8 - everything is fine and our stuff plays well with our LMS Customer!

  The extent of scenario 2 - the publishing options do not include the wrapper of AICC conversion required to operate properly on a 9 configuration pre-connect LMS, so same edition in AICC, mingle you results saying the course is underway and all at the same time. The solution which was finally useful came from Andrew Chemey at Adobe, who sent a file zip which allowed me to package a SCORM 2004 published the script file in a wrapper that communicated with the AICC based connect 8 LMS. We wrapped all of our courses built in scenario 2 in this packaging, posted to the LMS and officially retired the software.

• External hard drive gives USB not recognized error

  I have a Western Digital Passport 80 GB HD, which worked fine with XP until today.  I plugged this morning and received an error not recognized USB.  I followed the troubleshooting tips and online help.  It seems that in most cases, if you go to computer management / disk management, you can see the external hard drive.  This is not the case with mine.  I don't see the player.  I downloaded the recovery software, but everything is based on the premise that the drive appears.  Mine does not work.  Can someone help me?

  Thank you.

  Unfortunately, this drive has probably went wrong.  Have you tried another cable to connect your player to your computer?  It may be a long shot, but it is possible that the cable could be damaged.  You may need to take your car to a specialist in recovery to recover the data.  I apologize for the bad news.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP does not recognize the iPhone - device not recognized error

  I am running Windows XP (SP2 I believe) and whenever I plug in my iPhone I get the error not recognized USB device. If iTunes does not recognize it and I can't sync. My guess is that I'm missing or have an updated driver, but I don't know how to install. If it makes a difference, I am using a brand new MacBook Pro and Windows XP via Parallels Desktop. I don't think it's the question, though, as I used to be able to sync with my Manager (ACT!) contacts via Outlook. It seems to be simply a function of Windows is not able to identify the iPhone via USB. A simple solution would be appreciated, but I'll take complicated if that's all that's available.

  Hello abogadopeter,

  Thank you for visiting the Microsoft answers community.

  This question has been a known issue that seems by Parallels. I did some research and read through some of the threads for workarounds. He doesn't seem to be a conclusive solution, but works to some extent. You can take a look at http://forum.parallels.com/search.php and simply search for ipod and look through some of these institutions.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "USB device not recognized" error keeps popping up and USB devices do not work

  I receive the error USB not recognized on my HP Vista laptop at home.

  For anyone else who might have this problem until I make this comment and you run windows 8.1 there is an update that fixes it!

  http://support.Microsoft.com/en-us/KB/3013769#fixed_issues

• Bluetooth mouse stopped working & USB device not recognized error

  Laptop using Windows Vista

  I was using my bluetooth mouse when I plugged my mobile phone (via USB cable) in charge. I have done this before w/o a problem (perhaps in another USB Port, now that I think about it) but I did this time and I instantly lost the ability to use my bluetooth mouse and the "USB device not recognized" bubble popped up. Now, this window pops up almost every 10 seconds even with disconnected USB mobile phone.

  I went to bluetooth devices trying to pair my mouse w / new laptop and I can not. It's not show my mouse and when I go to Bluetooth settings and try checking the box (and pressing OK) under the discovery that reads "Allow Bluetooth devices to find this computer" it gives me an error saying that this is impossible.

  Help!

  The manufacturer of my hardware (bluetooth mouse) will not be able to explain why this struck dead window device unrecognized USB is coming non-stop. Above tutorials did not help at all.

  Hey wsdp

  "The manufacturer of my hardware (bluetooth mouse) will not be able to explain why this unrecognized USB device breath."

  ask them

  Walter, the time zone traveller