Sansa E250 doesn't start not

Similar Questions

• Facebook App doesn't start not

  Hi all

  I have a problem with the Facebook app for my TouchPad - it starts only once or twice and then it won't start more.

  Looks like the works still features related to the account (photos etc), just the app itself that won't start.

  I have already tried:

  Does not:

  * Uninstall/reinstall

  * Uninstall/reboot/reinstall

  Works for a short period:

  * Erase data (followed of re-registration/reinstall etc.)

  * Inkwell (not tried it myself, but apparently works also for a little while)

  Anyone else here with a TouchPad that knows these symptoms? Inkwell/deletion is not a solution because the I have to redo _tout_.

  I don't know if they fixed the issue directly or if it was because of another bug, but after the 3.0.2 update the Facebook app now starts with my regional setting

• CS6 download indicator doesn't start not

  Download CS6 didn't start there at - it a problem with the download site?

  Download assistant seems to wait for the download to start

  found it... to save to the desktop, not a program folder. started to download

• Alienware Aurora R4 doesn't start not

  When I start the computer by pressing the power button, it loads the screen where it shows the version of the BIOS and stuff. After that, it goes to a loading screen, then it black screens. Please help someone, I'm not very good at such things. I posted a video, link below:

  http://www.YouTube.com/watch?v=IyviMZ5mz20

  Safe mode is F8 or this:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  Diagnosis (PSA/ePSA) must come from a F12 boot menu.

• Process scheduler doesn't start not

  Hello
  I am running 9.1 PeopleSoft HR, db Oracle 11.1.0.6, PT 8.50. The database, the application server and the web server are all on the same machine - Enterprise Linux 5.
  
  Basically, I have problems to start the server after an ip address change.
  I changed the system wide configuration ip - / etc/hosts, network ifcfg-eth0 script and so forth
  psappsrv.cfg has changed with the new corresponding, in charge of the tuxconfig edited ip address
  (also changed the configuration.properties for PIA)
  As far as the network is concerned, everything works fine - LAN and outdoor access.
  
  The database server and the Application starts ok. I can connect using sqlplus he-based and the Application Server starts without errors of psadmin.
  When I try to start the Scheduler process I get the following:
  

  Starting Process Scheduler Server PSUNX for Database HDEMO91 ...
  
  Booting all admin and server processes in /root/psft/pt/8.50/appserv/prcs/HDEMO91/PSTUXCFG
  INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
  
  Booting admin processes ...
  
  exec BBL -A :
       process id=5200 ... Started.
  
  Booting server processes ...
  
  exec PSMSTPRC -o ./LOGS/stdout -e ./LOGS/stderr -A -- -CD HDEMO91 -PS PSUNX -A start -S PSMSTPRC :
       process id=5201 ... Started.
  exec PSAESRV -o ./LOGS/stdout -e ./LOGS/stderr -- -CD HDEMO91 -S PSAESRV :
       process id=5221 ... Started.
  exec PSAESRV -o ./LOGS/stdout -e ./LOGS/stderr -- -CD HDEMO91 -S PSAESRV :
       process id=5229 ... Started.
  exec PSAESRV -o ./LOGS/stdout -e ./LOGS/stderr -- -CD HDEMO91 -S PSAESRV :
       process id=5237 ... Started.
  exec PSDSTSRV -o ./LOGS/stdout -e ./LOGS/stderr -p 1,600:1,1 -sPostReport -- -CD HDEMO91 -PS PSUNX -A start -S PSDSTSRV :
       CMDTUX_CAT:1685: ERROR: Application initialization failure
  
  tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
  
  exec tmshutdown -y

  CRP / < domain >/LOGS/stderr:

  PSJNI: INFO: Unloaded the Java VM

  CRP / < domain >/LOGS/stdout:

  =================================Error===============================
   Message:  The FTP Address for transferring files to the Report Repository is not specified
  Please correct this error by updating the info for Report Node: ReportNode
  in the Process Scheduler Manager's Report Node Definition page.
  Due to this error, the Process Scheduler Server will not be started..
  Please correct this error prior to attempting to start the server PSUNX.
  =====================================================================

  Now, looking at the stdout, it seems that the solution may be a simple configuration change, but how do I access a report node page?
  
  I tried to start PIA just to see what would happen. I get the following message on the page of signon PS:

  CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session

  I'm a newbie at this and appreciate any input.
  Kind regards.

  Honza,

  Server Web fails to communicate with appserver. I guess that the port number you have given to the webserver configuration files (configuration.properties) is correct? Check psappsrv.cfg and match the port numbers.
  1. try changing IP address host name of the Web configuration.properties file server. Server Web Bounce (Restart) and appserver. If this does not
  2 recreating the field appserver and Web server with a different port number other than 9000. Make sure that the port numbers are not blocked

  -Vijay

• Install testversion InDesign, the download doesn't start not

  Hi, I am installing InDesign testversion. When I klick on install nothing happens it just says download. I have a Macbook OSx Version 10.9.5 (2010) and Yosemite is installed. Any ideas? Thank you

  Hello

  Please try to download the application directly via the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  Kind regards

  Sheena

• Sansa Fuze connects, but does not load and does not appear on my computer.

  Hello everyone.

  I have a 4 Gb Sansa Fuze, which is (of course) out of warranty.  I have been enjoying his music for quite awhile and have had absolutely no problems with it until two days ago, when it ran out of battery.  I left it in my car and the next day went to connect via the USB port on my computer.  The sansa has begun with its typical "splash screen" reading "Sandisk Sansa, followed shortly after by a blue moving the ring and the words 'Connected', followed by about a second later"writing", followed by a second. later 'connected'  This is normal for my fuze (that I know).  However, the problem with the logo of the battery in the bottom right of the screen, which normally indicates a small "lightning bolt" next to the battery and it shows the battery 'filler '.  Now it shows only a white empty battery.  There is no bolt of lightning, and there is no charge to the battery.

  I have tried to consider the sansa as a device via "My Computer" and sync in Windows Media Player.  None of them show that I have nothing connected.  The sansa updater doesn't recognize not my rocket is connected.

  I know for a fact that the USB loader is not faulty, as I also have a second Sansa Fuze that connects perfectly and was purchased at the same time.  I don't think that it is the slot USB itself that I changed the port to all others and still did not have a change in the status of my sansa (broken).

  If it helps is that I connect to the computer:

  HP Pavilion m7580n

  AMD Athlon 64 X 2 processor Dual Core 4400 +

  2 GB DDR2 RAM 1.8 GHz

  Windows XP Media Center Edition SP2

  Thanks in advance for any help that can be given...

  also, I would like to apologize if this has already been discussed (I read until my eyes hurt and couldn't find something similar).

  Thanks again,

  Josh

  UPDATE:

  Apparently the good things come to those who wait (and leave that their Sansa rockets connected for days despite the hopes of oinitial n it will load).  Today I woke up and found that my Sansa Fuze, which previously were not load had miraculously blamed himself.  I have unfortunately no idea as to the reason that he works all of a sudden.

  Thanks for your help anyway!  It is good to know that there is a place to come when your Sansa is broken...

  Thanks again,

  Josh

• Sansa e250 45 second each time start?

  Is this normal for Sansa e250 refresh database whenever it is turned on, even if nothing has been added or removed from the player?

  It's annoying to have to wait 45 seconds until I can start listening to my music, listed on the radio or use the voice recorder to record something

  If it is a v1 model and you have a card inserted, Yes. It will refresh the database whenever you turn it on. If no memory card is inserted, it will not be.

  This changed when the v2 of the e200 Series variant arrives on the scene. A different processor and firmware eliminated the need for the update at startup when a card is detected in the slot.

• Micro SDHC not recognized Vista when the card is inserted in Sansa E250

  Hello

  I have Sansa E250. I used to have the 1 GB microSD card and I was able to access it on my computer with XP.

  Recently, I bought 4 GB micro SD and SDHC cards. Now I have Vista on my computer and when I connect the MP3 player with HLA card installed on a computer I'm not able to access removable drive of the card and I get an error message.

  Is it a Vista thing? Is there some drivers or firmware that I need to install to be able to use my new card CD?

  How do I install it on my Sansa?

  Thank you

  I installed the Rockbox on my Sansa e250 and it works very well and the new 4 gb SD card works as well.

  I can't load the image well then rockbox is on my presets of radi got all erased. But these questions are fine. I can always switch back to Sansa Firmware.

  Thanks again for your help

• My Sansa e250 v1 is VERY strange (memory loss)?

  Today, I downloaded new music and went to synchronize on the e250. My e250 2 GB (v1: 01.02.24A) was dead at first, so I connected on the computer to give a head start to recharge before starting synchronization. After that the music was supposed to be safe on my camera, I turned it back to check and make sure that it is there. Instead of some 300 songs , I've had before (I also have a Micro SD card of 2 GB in there) I find only 11, with the logo of what meant he was on the SD card. (If none of you have the small logo beside it, I apologize, but that's what mine did). When I open the files on my computer first, and then in my Windows Media Player, it shows all my music on the device and also says that the memory is always repeated. When I look on the device itself, he has only these 11 songs. I tried disconnecting and reconnecting the cable charger/sync, reset the battery, everything I can think of.

  ((On a side note, my computer don't bed the SD card when it is in the first mp3 player - it is not since after the first two times, I synced music with her inside. But there were songs that were the symbol of the SD card next to it in the drive. In addition, since the player has had the inside SD card, a small green window pops up on my screen after start of the original mp3 player, saying "refresh database". This has not been a problem until now, but I wonder if this is normal?))

  Any help is appreciated, thanks!

  If any of you have this problem: I just fixed mine.

  Make sure that you back up ALL your music files if you want to resynchronize, because the only way to get rid of this weird problem is to do a complete memory dump - this means entering the Sansa e250 files on your computer WHILE THE DEVICE IS PLUGGED INand delete ALL SONGS, ALL OF THE VIDEO, ALL of these files. NOT the files themselves, those you need. Just the CONTENT of them. Then go into any media player you use and re - sync all. Or what you want there, is irrelevant. Then you have the music in the back. I have no earthly idea as to how it happened. All I know is that I fixed it.

• Cannot sync Sansa e250 with Windows Media Player on Windows Vista

  OP: MP3 player does not connect. Sansa e250. Has worked before. Windows media player does not. Meter turns, but does not sinc for Windows Media Player

  Please help me solve this problem.

  Hello paj137,

  1. do you have an error when attempting to sync with Media Player, or everything just doesn't detect media player?

  2. don't you make changes to the computer before it stopped working?

  3. will the player detected in Windows Explorer?

  First check to see if the drive is detected on your computer. Try to copy the files of music from Windows Explorer.

  Most MP3 players will appear as a "disk" on your computer, and you can browse the files on them by simply opening.

  If you can do this, you should be able to copy / delete / move files between the MP3 player and the computer.

  Also try to set media player to manually synchronize with Media Player. This article should help you with that:

  http://Windows.Microsoft.com/en-us/Windows7/sync-manually-in-Windows-Media-Player

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Sansa e250 questions

  Hello

  I'm new to this Ant thing, and I don't know if this problem has been addressed before, but it would be great if someone could help me!

  I got my sansa e250 for about 2 or 3 years now, I guess, and it has always worked well.

  I turned on the other day and tried to play a song, but it says "wrong track." I know that this can happen sometimes and thought nothing of it. but he spent with all the songs I played.

  In addition, the player was all deleted music out of my playlists and when I went to view album and artist, he said that he had nothing. but according to the song, he said I had 754 songs out there.

  I connected it to my computer and deleted everything on the player, it works and it was always in the same situation, with 754 songs, artists or albums and they were all the "bad tracks!

  very frustrating. I have tried everything I can think of, like everything reset and take the battery, all with the same result!

  When the device is plugged into the computer, it shows all the folders are empty. It is said that no space of memory has been used, there still 1.8 GB of left of the Hall. (what a 2 GB device)

  so if anyone knows what the hell is wrong with it or what can be done to remedy this, it would be greatly appreciated!

  Thanks in advance!

  It is possible that your cord is wrong. But try to reformat via Recovery Mode. I hope that your E250 is a unit v1 - you won't see Welcome to the recovery on a v2 Mode, so we need to try something else.

  It's the excellent Markster step by step:

  Now, to solve the problem.  The easiest way is to just reformat the drive in Recovery Mode.  This will delete all your files, however.  Here's how:

  Turn off the player.

  Slide the HOLD switch to the locked position.

  Press and hold the RECORD button when connecting to the PC.

  RECORD output once you see "Welcome to Recovery Mode" on the screen of the reader.

  You should now be able to find that a new removable drive in my computer called 16 MB-FORMAT.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  Are we clear on that?<>

  16 MB - FORMAT open and create a new folder named sansa.fmt on it in the root directory.  You can now slide the HOLD switch to the unlocked position, use the remove safely icon and disconnect the player.  It will be noticed the sansa.fmt folder, and he saw, format itself and reboot.

• Problem with sansa e250

  I have a proplem with my sansa e250 after upgrade. Now, I can't start my sansa. The sansa is frozen. Simply appear SanDisk logo on the screen, the blue wheel lite and that's it.

  I tried several times to reset it by pressing the power on button (menu) for more than 15 sec. It power from this, but when I try to start it again the problem persists - sansa e250 froze after sandisk will apear on screen logo.

  Please help me

  I'm in recovery mode. I downloaded a safe recovery tool (e200fw01.00.12), but when I start it up I got a message from what ERROR Application failed to read the version details!

  I find that I have to put some mi4 file in 16 Bit file. What is it? Where can I find it?

• Connect Sansa e250 to my audio devices via USB

  Hello

  Connect my sansa e250 to my Denon amp via USB only pieces of audio file of fixed drive will not play anything micro sd expansion port why? Using the sansa E250 01 software
  I would like to say good quality is achieved via USB and I can use the Denon remote

  When the sansa e250 USB connection port denon amp using rock box will not work
  Let's get only by jack stereo 1/4″ but will play music mm two disks

  Help

  Hello
   
  Yes, I should of said unit Sansa MSC mode, if I put in the MPT mode denon amp will not read the sansa e250 arrives with disconnection.
  I know that's not very common. I just bought a sansa fuse with more memory, but I was just wondering if there is any way to be able to have access to the micro SD and card.
  Thanks for the reply.
  Terry

• Problem of micro card SD of Sansa e250

  I have a sansa e250 its works perfectly, but the problem is

  on the micro SD. I have sandis micro SD 2 GB card and I want that it

  to use with my sansa e250 but when I insert the micro SD card

  and connect it to my computer sound empty, no micro SD card.

  my PC can not read the micro SD it is drive: j and reader: k

  but the reader: k says pls insert a floppy in the drive: k, but I fit

  the micro SD card.pls help me!

  firmware version is 1.02.15A

  Edit: I update my sansae250 to version1.02.24

  and then I try to reuse my micro SD card

  and its does not work. What should I do with my sansa?

  I want to use the micro SD card because its only 2 GB.

  With your v1 player (as indicated by your firmware version) you can only use MSC mode when it connects to your computer in order to access (add or remove) songs on the map. MTP mode will not work. Period.

  As c1u31355 suggested, make sure that the card is placed properly into the slot on the side of the player. The lttle Ridge or bump in the middle of the edge on the map will be little difficult to get through the first few times you push the card. Then it wear out a bit on the edge and slide smoothly.

  

  Push it all the way, even slightly beyond the opening until you hear a slight click. He's going (to spring) very slightly here where the top edge of the card is more or less equal or slightly superior to that of the housing of the drive. You will hear a 2nd click. Pressing in there again until it clicks (you should probably use a nail) again, it will release and spring will push out so you can catch it.

  Moreover, just for precision, the card will in the drive upside down (with the bump on top).

  -------------------

  c1u offers a card reader to see if you have a bad card, or if the problem is with your player. If you put the card in the card reader, and you can transfer (drag & drop) of music files, your card is OK, and you might have a problem with the drive.

  Just so you know, you can not 'sync' music to the card if it's how you normally do. This would require the MTP mode which will not work. You have to do drag & drop from the computer to the card. It's the only way. Well, actually you can rip directly to the card, but that's another topic.