Import into LR after importation of LRM

Similar Questions

• laptop is not put into hibernation after "standby mode"

  Reference Dell dear community,

  I have an Insipron 17R core i5 zm2410, NVIDIA Geforce 525 m, win8 64bits and I am facing a problem with hibernation mode / sleep.

  About 2 weeks ago my laptop went mode hibernation after beeing in mode 'sleep' for 2 hours on battery (for total draining of the battery to advoid).

  Now, it is not do it anymore but remains on "sleep" during all the time and drains the battery.

  I usually remove the power cable from the laptop during the night because of the noise of the adapter and the laptop always put into hibernation after beeing in mode 'sleep'. I went over the configuration in options plans and power supply and even reset and configured them again, without success.

  The only changes made to the system are important updates of windows

  I'm grateful for any suggestions or solutions.

  Have you checked to see if Hibernation is still active? Open an administrator mode command prompt and type: powercfg/h on.

• 360 13 inches x spectrum: spectrum x 360 8.1 Windows stops to get into sleep after a few hours

  My x 360 spectrum stops to get into sleep after a few hours of normal behavior.  In other words, when the computer is started first, he put on standby and Hibernate mode then normally after the specified idle period.  It can then be woken up and work normally and then to go back to sleep after inactivity - during a few hours.  It stops working after the computer has been for a few hours.  I don't know exactly how much time must be in place before this problem starts, but once it ceases to be able to sleep, the only way to solve the problem is to reboot the system.  Once the problem occurs, the computer turns off the screen but that's it.  He will sleep if I do it manually by pressing the button of power or a click on the Windows button and forcing them to sleep or hibernation.

  I watched powercfg /requests and there is nothing listed that could prevent sleep.  I ran also report with fluo compact powercfg and it also does not list something that prevents apparent sleep.

  NOTE: The energy report is also EVEN if the system still works correctly.

  I could use help to determine what is the cause of this condition.

  Thank you.  See below for diagnostic information:

  Here is the result of the /requests powercfg command:

  C:\Windows\System32>Powercfg /requests
  DISPLAY:
  None.
  
  SYSTEM:
  None.
  
  AWAYMODE:
  None.
  
  PERFORMANCE:
  None.
  
  PERFBOOST:
  None.

  Here is a release of energy report (Note: site Forum HP changed the HTML code):

  Power efficiency Diagnostics report
  X 360 computer name
  Analysis time 2016-01 - 06 T 15: 16:32Z
  Scan duration 60 seconds
  System manufacturer Hewlett-Packard
  Product system name HP spectrum x 360 Convertible 13
  Date of the BIOS 10/23/2015
  Version of the BIOS F.2D
  Build OS 9600
  PlatformRoleMobile platform
  Plugged In true
  Number of processes 164
  Contexture 1892
  Report GUID {f8670991-ccc2-4c9e-b743-81cb15d13b03}
  Results of the analysis

  Errors

  Suspension device: USB get USB selective suspend
  This device is not in the State of selective suspension of USB. Processor power management can be prevented when the USB device is not in the State of selective suspension. Note that this problem will not prevent the sleep system.
  Name of device Microsoft mouse and driver detection keyboard (USB)
  Host controller ID PCI VEN_8086 & DEV_9CB1
  Host controller location PCI bus 0, device 20, function 0
  Device ID USB\VID_045E & PID_0745
  1 port way

  CPU utilizationrocessor use is high
  The average CPU utilization during the trace was high. The system consumes less power when the CPU usage average is very low. Examine the use of the processor for the individual processes determine the applications and services that contribute the most to the total CPU usage.
  Average use (%)     11.12
  Platform power management capabilitiesCI Active Express - State Power Management (ASPM) disabled
  PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.

  Device drivers:
  Devices with missing or misconfigured drivers can increase energy consumption.
  Card device name Cisco Systems VPN for Windows 64-bit
  Device ID ROOT\NET\0000
  State of the device 0 x 1802401
  Code 0 x 16 device problem

  Caveats

  Platform timer resolutionlatform Timer resolution
  Default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the resolution of the timer is increased, processor power management technology may not be effective. The resolution of the timer can be increased due to media playback or graphic animations.
  Current resolution of the clock (100ns units) 10007
  Maximum Timer (100ns units) 156250
  Platform timer resolutionutstanding Timer request
  A program or service has requested a resolution of timer is smaller than the maximum platform timer resolution.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 8464
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.48
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 1360
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,58
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 9788
  Average use (%)     1.08
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name HPSF.exe
  PID 11968
  Average use (%)     0.71
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\System32\win32k.sys 0.10
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll 0.10
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name netsession_win.exe
  PID 5828
  Average use (%)     0.67
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.10
  \Device\HarddiskVolume4\Users\Zeldar\AppData\Local\Akamai\netsession_win.exe 0.04
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 5712
  Average use (%)     0.63
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome.dll 0.35
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.11
  \SystemRoot\system32\ntoskrnl.exe 0.08
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process system
  PID 4
  Average use (%)     0.55
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.05
  \SystemRoot\system32\DRIVERS\dne64x.sys 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process explorer.exe
  PID 3988
  Average use (%)     0.43
  Module Module average use (%)
  \SystemRoot\System32\win32k.sys 0.15
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 7920
  Average use (%)     0.39
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.22
  0.14
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name WWAHost.exe
  4604 PID
  Average use (%)     0.28
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.10
  \SystemRoot\SysWOW64\ntdll.dll 0.03
  \Windows\SysWOW64\jscript9.dll 0.03
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name UoipService.exe
  PID 2544
  Average use (%)     0.25
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\system32\drivers\afd.sys 0.02
  \Device\HarddiskVolume4\Windows\System32\mswsock.dll 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 6600
  Average use (%)     0.24
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,18
  0.04
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.00

  Information

  Platform, resolution: timer Timer application stack
  The battery of the modules loaded for the platform timer low in this process.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Call stack \Device\HarddiskVolume4\Windows\System32\ntdll.dll module
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\WPF\wpfgfx_v0400.dll
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll
  Political power: Active Power Plan
  The current power in use plan
  Plan custom name
  Map of GUID {e427f965-afc6-4f07-b387-e9be116f159e}
  Power politicsower Plan personality (on battery)
  The personality of the current power plan when the system is on battery power.
  Personality power saver
  Political power: video quality (on battery)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Mode of quality balancing video quality and energy savings
  Power politicsower Plan personality (Plugged In)
  The personality of the current power plan when the system is connected.
  Personality power saver
  Political power of political power Radio: 802.11 is a maximum Performance (Plugged In)
  The current policy of power for compatible 802.11 wireless network adapters is not configured to use reduced consumption patterns.
  Political power: video quality (connected)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Quality optimization for video quality mode
  Success of queries: analysis of system availability
  The analysis was successful. No problem of energy efficiency have been found. No information has been returned.
  Battery information: battery
  Battery ID Hewlett-PackardPrimary
  Manufacturer Hewlett-Packard
  Serial number
  Chemistry LION
  Long term 1
  0 seal
  Nominal capacity 54720
  Last full 54720
  Platform power management capabilitieslooking at the States of sleep
  Sleep States allow the computer to access the modes low power after a period of inactivity. The waking state S3 is the State of default Eve for Windows platforms. The waking state S3 consumes only enough power to preserve the contents of the memory and allow the computer to return to work quickly. Very few platforms are supported States S1 or S2 sleep.
  False S1 sleep taken in charge
  False S2 taken sleep support
  True S3 Sleep taken in charge
  True S4 sleep taken in charge
  Platform power management capabilities: connected standby support
  Connected standby allows the computer enter a low power mode in which it is always on and connected. If supported, connected standby is used instead of the system sleep States.
  Connected supported watch fake
  Platform power management capabilities: Adaptive brightness is supported.
  This computer allows Windows to automatically control the brightness of the built-in display.
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 0
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 1
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 2
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 3
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Controls of Type ACPI Performance (P) performance / Throttle (T)

  I found a thread on Microsoft answers community web site.  Unfortunately, it seems that Microsoft has not fixed even though this thread is over a year.  This has been driving me crazy.  In any case, the problem is with Windows 8.1 and is caused by the use of a Microsoft account to connect to the computer.  If the account is not connected, after a few hours the computer stops to fall asleep.  If you close the MS account, then the computer will sleep normally.  My dose is to convert my connection from the local computer to a local account and disconnect from Microsoft.  This process is easy to do, go into the settings of PC and disconnect the account.  It will keep your original profile.

  Here is the link to the thread that got clued in the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-refuses-to-sleep-automatically-idle/6ab4aaaf-31bd-4baf-ABC6-62ba8c8260aa?DB=5&page=2&rtAction=1452178632575

  I consider this resolved issue that HP is concerned.  Microsoft needs to address the issue.  I'm not interested in switching to Windows 10 for compatibility reasons and, in this regard, the same problem can exist in the W10.

• Try to import the original files into iPhoto after unsuccessful recovery

  Hi all, hope someone can offer advice I'm having a lot of trouble trying to recover my iPhoto Library after the disappearance of all my photos from iPhoto v 9.1.5. I know that the files still exist, like my iPhoto library file size displayed 91.44 GB and I can see the master of the files when I show the contents of the package. I do not have a backup (big mistake, I know, I'll be sure to correct now) so I'm stumped.

  I tried to rebuild my library using several options in the dialog box "Rebuild Photo Library" iPhoto, but progress always gets stuck when 24508 files have been rebuilt. The app still seem to work very well on the dock, but it ends up requiring Force Quit under the "Force Quit Applications" pop-up.

  I tried to rebuild using iPhoto Library Manager, as I've seen suggested in other posts, but the app doesn't seem to register/find my iPhoto Library when I select it (after going to > rebuild library by selecting my iPhoto Library, nothing changes in the app and "Default Library" is always empty). I'm guessing this has something to do with the fact that I had to force her to leave the first time dialogue 'Rebuild' popped up in iPhoto.

  At this point, I don't care if my previous metadata edits, tags, etc. are all lost, I want to just my originals in iPhoto so that I can at least begin to reorganize all the. To do this I tried to add my master removal to iPhoto and encountered the error "file could not be imported. The file is located in the iPhoto library. "Is it because these original files exist within the iPhoto library, even if they are not showing in iPhoto? If so, my original files exist everywhere 'outside' of the iPhoto library I can import them successfully?

  Is there a way I can recover my original photos in iPhoto? I'm at the end of my spirit, so any help on this is much appreciated, no matter how tedious the solution is!

  You must move the folder of Masters of the packaging of the library.

  Then create a new library - the existing one is borked, as you can see.

  Hold down the option (or alt) key and launch iPhoto. In the menu that appears, select 'Create Library'

  Import the masters in this new library.

• LR 6.2.1 - pictures (previews and views complete) turn into black after the import

  Hello!

  After the import, all the photos of change to black (in library and also to develop)

  I tried to activate / disable the extra graphics processor without success.

  It's the same thing on the 40 d and also on D 70.

  Pictures are saved in RAW, imported they come out of the camera.

  Does anyone have recommendations?

  
  

  

  Thank you!

  Siegi

  Hi Siegi,

  Please follow the steps below:

  1. Disable apply tone controls auto under Lightroom preferences > Presets tab
  2. Restart Lightroom and then import images again.

• Not able to re - import images into Lightroom after upgrade Windows 10 system

  A brief history: I've upgraded to Windows 10. The video driver kept crashing (I do not do a clean install, upgrade) and I decided to uninstall the driver and do a clean install of it. To do this, it was recommended that I have started in safe mode. I'm locked down because it asked for a password that I didn't because I used a PIN. A boat full of minor issues as well as the fact that he seemed to be in no way around the issue of safe mode password pushed me to reload the OS I did a new SDS. All right. I kept the same letters to my external storage drives. When I installed LR, I discovered that Windows has changed my drive 'K' to 'E '. I changed it back, but she is now TWO drive letters.

  Fast forward to LR: I don't have records of my 'K' drive in my library.

  At this point, I resigned to re-import files. Despite the 50 or more, I can do this. Well, that's weird: when I choose 'Import' thumbnails appear and then the 'DOUBLE SUSPECT"are of course are not checked! Clearly LR is telling me that these files are already in LR, but where? The files that I CAN import are ones I removed LR.

  ANY suggestions?

  Thank you!

  one

  Fast forward to LR: I don't have records of my 'K' drive in my library.

  At this point, I resigned to re-import files.

  Reimport the files will not fix the problem, it will most likely make the problem worse.

  You need to find photos in your Lightroom library (instead of re-importation) module, and then include this file, they are, according to Lightroom.

  Steps to follow:

  1. Click on all photos
  2. Disable filters (Ctrl-L for Windows) or Cmd - L for Mac once or twice
  3. Sort photos (view-> sort-> filename)
  4. find one of these photos by file name scrolling upwards or downwards until you find the photo in alphabetical order
  5. Determine the folder is to right-click on the photo and then go to the folder in the library, which should highlight the folder on the left in the library panel (if all goes well, once you find the folder for a single photo, you should be able to find the records for all photos)

• BlackBerry Smartphones music player goes into mute after every song?

  Hi everyone, I hope someone can help me with a problem I have with my Storm 9530. Whenever I listen to music on it (which is most of the time), unless I'm actually in the form of playing under the application of the music, the sound cut when switching to another song. It is not only stop or pause playback; It actually cuts the song, so if I don't notice it happened for a few minutes, half of the song will be played and the sound does not return unless I increase the volume. Someone at - he heard of that happening before? I know it's a relatively minor issue, but it is rather annoying. She also can't when I'm listening via speaker - I have the problem if you are using the handset speaker or headphones.

  It didn't happen straight out of the box, either - it just started happening a few weeks after I loaded my music on it. I ran diagnostics/security analysis on my computer and on the media card, and both are free of malicious software or corrupted files. I called Verizon Wireless and their technicians could not offer anything that either short-term to Exchange my Storm for a new - I did, but, now, a few weeks after I had a new, I started having the same problem, so I think there must be a setting that I've accidentally changed - but I went through all the options and I can't find something that seems like it would be applicable.

  I really appreciate any insight or help someone of you can give. Thank you!

  Chris

  back up your device with DTM

  close DTM

  Make sure that DTM is version 4.7 or 5.0

  Click on start-run and type cmd

  Press enter

  type:

  CD c:\program files Research in motion\apploader

  Press enter

  type:

  /resettofactory Loader.exe

  Press enter

  This will reset your device to factory settings

  When she returns to the top, test your music and see if you have the same problem

  Performa selective restore

  Open DTM, click Backup/Restore - advanced

  on the left side, click file - open

  Select the backup wemade earlier

  Select ONLY the important databases on the left and send it to the right

  avoid data bases related to the media and all related options

• Can't get into BIOS after the use of "Quick start" mode

  Hello

  I do things
  1 - Enter my BIOS
  "' Quick start of start 2-change of speed to.
  Then I restart my knees and Toshiba logo disappeared.

  I want to get into my BIOS again, but how
  I tried F2, F12 and del not question

  Please help me

  > I ve tried F2, F12 and del no question

  What cell phone do you have exactly?
  Have you tried to press ESC, then F1?
  If this isn't it!

  Notes; You must press the buttons immediately after the laptop has been powered!

• Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?

  HI, Satellite L70 - A - 13P

  I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!

  I keep the key pressed F2 but nothing works.
  I also tried ESC, F1, INS, F12, 0.

  Help.

  User and supervisor password the same?
  Have you been able to get into the BIOS in the past?

  Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.

• Windows Vista into hibernation after using the FLASH

  Hello

  I am running Vista Business and whenever I look at everything which requires FLASH my PC will keep hibernating after 1 minute. I'm unable to locate just why he does this. I've seen sites tell me how to turn off the HARDWARE ACCELERATION in FLASH PLAYER, but it does not help. Everyone knows about this problem?

  Help!

  Have you gone to the power options, power management, and check the setting into hibernation? For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Can't get into Bios after you enable the sata port

  Hello community,

  I have an Optiplex 755 and added a second hard drive.

  In bios the sata 2 and 3 ports have been disabled, I enabled both because I know not didn t on the port of witch the new drive has been connected.

  After a reboot the system stuck on ' Drive 3 not found: Serial ATA, sata-3.

  When I disconnect the new drive, I get the above message for 2 and 3 of the road car!

  I can only power the system off, the keyboard is not working at the moment. After a reboot, I can select F2 or F12, but the system will be blocked with the same error.

  I tried a third device to the port missing but then there is no error message, but there is only a black screen with a blinking cursor. No chance to get into the bios setup.

  The version of the bios is A08.

  Can someone help me please.

  Hi Andreas,

  Thank you for compensation for me!

  What may help is to reset the BIOS. To do this, you must follow the steps detailed here: ftp.dell.com/.../optiplex-755_user%27s%20guide_en-us.pdf (search for clearing the CMOS settings).

  Before the passage of the system back on, make sure that the system is in its state of origin (the original hard drive and optical drive). This can allow you to start the operating system successfully and access the configuration of the system as well.

  Let me know how you go!

• IMAP e-mail accounts went into Mail after upgrade of the Sierra

  I have three accounts of mail main I use, everything set up as IMAP accounts on my server of companies. I access it with four devices - 2013 iMac, iPhone 6, iPad (generation 3d) and a MacBook Pro 2010. I did the upgrade of Sierra on the MacBook Pro and, if my email seems to operate normally (inboxes and messages are still there - if I delete something from a box on the MBP, it appears in the trash on other devices, mail received as usual, etc.), when you go into Preferences-> accounts IMAP accounts make their appearance is no longer Although I see them as POP (which they were initially put in place as, but those who have been disabled when I have everything changed in IMAP and I just have not deleted.) They still show as inactive).  I also have an IMAP to iCloud account and who shows up as usual.

  Any thoughts?

  Check in your library > Mail folder. You see a V3 folder? If so, you always see your IMAP accounts listed? You must have a V4 folder now with your data.

  In Mail > Preferences > account, you can click on - to remove the accounts. This will bring you to system preferences > Internet accounts. Delete the account and add it as IMAP.

  Note: When you remove a POP account it also deletes all the data in the POP Inbox, drafts, Sent, Trash, and junk. You can save these data just in case he deletes also server when the account is deleted.

• Lack of music into playlists after iCloud question yesterday

  HI -.

  Yesterday, there was a problem with iCloud in which connections with the Apple's music have been interrupted. After that the problem was apparently solved, I now double playlists and all the tracks in the playlists are not there, a few, in some cases only 1. This is the same experience on my macbook, iMac and iPhone. I disconnected and folder, synchronize my iCloud, on or off the option of Apple's music library. I have tried these things on all 3 devices and and still not see the tracks. All my songs are in my library and all my playlists are there... it's just all the tracks are not in playlists is the addition of double playlists (and even those who do not match between the two.

  I replaced my file of itl iTunes library with the file since yesterday morning and when I restart iTunes, I can see the tracks that should be in playlists, but they are grey and the iCloud library begins to update, all the tracks again disappear and playlists double return.

  Called Apple support and talk to a counselor and Advisor of sr and they couldn't help. If anyone has any ideas, I would be very grateful.

  If this happens again, check the status for the Apple System Support page > https://www.apple.com/support/systemstatus/

• Whenever I go into emails, after the opening of two or three I have thunderbird no longer responds. (Operating system for several months) CAUSE: unknown. Disappeared after the reboot.

  As stated in my question, that this is the case whenever I open emails. After opening with two success or three, I get the message not responding when I try to open the following. This has happened for a long time and is very frustrating.

  Hi Wayne. Thank you for answering my question. I said, that your answer is not

                    solve my problem because I couldn't understand what any of it meant. We usually leave our computer on all the time and a friend who is more savvy than I suggested we turn it off for a while. This seems to have worked.
                            Cheers.   Stephanie.
  

• Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

  Hello

  I own Satellite Pro C50-A-1E2.

  Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
  I am trying to get into the BIOS but without success.

  I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

  I found this piece of information through Googling: "press f2, and then press power. But always without success.
  Help with my problem?

  Thank you.

  Hello

  Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

  Check it out.

  By the way: for some series laptop, press INS key then F2 worked too.