Import of lines that weren't there?

Similar Questions

• Is there an easy way to remove portions of lines that extend beyond a form?

  I know that I can use a clipping mask, but I'd rather not have the additional form of a clipping mask. I tried all Pathfinder orders and those who do not work. The form generator tool is tedious to do this. An example is the circle with lines extending above the circle in the illustration below. Is there an easy way to simply remove the portions of the lines that extend beyond the circle and let those inside the circle?

  

  You can Alt + click on each, or Alt + click - move on a bunch of lines at once.

• First Freezes / crashes during import & consistent - all better workarounds out there?

  Since the last CC update for the first I had the SAME problem on five different machines. During the import will freeze first, and I have to force quit smoking (mac) and reopen in order to correct. Sometimes it works, sometimes it doesn't - little matter HOW to import (media browser, file/import, and then drag from the finder etc...)

  Also, while in line first will freeze or hang on a clip and I have to save/restart so that the process pick up, where she had stopped. If I try to access the clips for confirming I'm risking clips (MP4 of C100 or of the C300) lack of large gaps in the audio.

  Finally. Once I am able to do import / in line, when editing, I'll open the files to see that many will not be load clips and show "media disconnected" when I try to play them (even if they show the poster frame when still. By opening and closing the first solved instantly.

  These questions don't are NOT material related such as the material has not changed on any computer. It is a software and it is the first which is the origin of the problem. They need to fix immediately. Our workflow is suffering of many man hours lost because of problems which do not arise until set CC to update the software.

  I tried to roll back and some questions were better, but others above were still visible. That save and reboot the software almost always solves the problem until the next time, there arises, makes me confident that it is a software problem. I ask first to do the same thing several times the same way, and sometimes it works, other is not.

  Someone has a workaround that is better than constantly economy/forcequitting/restart the software?

  OK - I figured out how to install the 2015.3 version. Under 'Find additional apps', I changed 'filter the apps' 'previous versions' and was able to select. It installs now - will update if it helps at all.

• Ordered the iPhone 7 using a line that I will not activate

  When I went to order my iPhone 7 on the Apple site, I was not able to transfer the update on my Verizon account to my line, so I used the line that took the upgrade. However, when I receive and configure the iPhone, I don't want to activate the phone on that line. Is there a way to change that line the iPhone turns on when I receive?

  When you retrieve the iPhone, contact your carrier and tell them what you want and ask them how to proceed.

• Had an accident and I want to import my favorites into Firefox but the only option in the Import Wizard is that is my B/brands are saved on a memory stick. Any solution please. ?

  Had an accident and I want to import my favorites into Firefox but the only option in the Import Wizard is that is my B/brands are saved on a memory stick. Any solution please. ?

  How bookmarks are stored? If they are in an HTML file, you can go to bookmarks > organize bookmarks > import and backup > import HTML, select "in a HTML file" and go from there.

  If you have not currently saved favorites and b / m to import is already in a FF bookmarks file you could just more copy to your profile.

• OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

  There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

  Hi gljatlaw,

  I see that you are having problems of quality of scan.  I'll take a look at the document below.

  Scan quality

  Let me know how it goes.

• Windows 8 cursor jumps in the existing text and continues to type here rather than the finish line that I am on, anyone else spotted the same thing?

  Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on.  Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part.  Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated.  Think there may be a loophole to WIN 8.  It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing?  Or is it just me?

  Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.

  Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from

  http://www.Synaptics.com/resources/drivers

  above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.

  Its such a relief to be able to settle this problem - THANK you

  Lets see if it sorts the problem MS Office too.

• the neutrophilia help lines that do not have a match.

  I'm having a hell of a time trying to write a select statement that would choose to specific lines without match. hurt after a sample of my table and data below.

  creating the table

  CREATE TABLE "IDEA"
    (
      "CODE"        VARCHAR2(32 BYTE),
      "ACCOUNTCODE" VARCHAR2(32 BYTE),
      "DRCR"        VARCHAR2(20 BYTE),
      "ENTRYID"     VARCHAR2(32 BYTE),
      "JOURNALAMT"  NUMBER(17,2)
    )
  
  

  data in the table.

  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172863', '6.27')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172863', '6.28')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '1115', 'CR', '172863', '-12.55')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172899', '0.25')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172899', '0.25')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172899', '197.25')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172899', '197.25')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '1115', 'CR', '172899', '-394.50')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172903', '975')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '7038', 'DR', '172903', '975')
  INSERT INTO "IDEA" (CODE, ACCOUNTCODE, DRCR, ENTRYID, JOURNALAMT) VALUES ('Company', '1115', 'CR', '172903', '-1950')
  
  

  When I run the following query I have that would get the following result

  select
      --DRCR,
      ENTRYID,
      sum(JOURNALAMT)
     
  From idea
  group by entryid
  
  

  my top of the query output.

  "ENTRYID"                     "SUM(JOURNALAMT)"             
  "172863"                      "0"                           
  "172899"                      "0.5"                         
  "172903"                      "0"                          
  

  I want to identify the lines that make up the 50.

  Please note that there might be 3 or 4 lines per credit. so it could be a football match of the 4DR same 5DR or 1 CR 1 CR however will always be 1 CR.

  I thought to write a plsql program that would try to match every single possible combination for 1 credit, but it seems to me that there is an easier way.

  any help would be grateful.

  Hello

  Here is a function that attempts to find a combination of 'DR' ranks with the entry ID given, whose journalamts correspond exactly to the amount given.  If If is such a combination, it returns a string that contains a list delimited by amounts.  You coould easily change this to return a list delimited by primary keys, or whatever you want:

  FUNCTION to CREATE or REPLACE dr_list
  (entryid_wanted IN idea.entryid%TYPE
  journalamt_wanted in NUMBERS
  prev_rowid IN DEFAULT NULL ROWID
  )
  RETURN VARCHAR2
  IS
  "failure_message VARCHAR2 (50): = '(aucune correspondance trouvée);
  remainder_list VARCHAR2 (4000);
  return_list VARCHAR2 (4000);
  BEGIN
  IF journalamt_wanted > 0
  THEN
  return_list: = failure_message;   -Are likely to be replaced later

  -Find each line that may be part of a solution
  FOR (IN) r
  SELECT journalamt
  R_id AS ROWID
  The IDEA
  WHERE Drcr = "DR".
  AND entryid = entryid_wanted
  AND journalamt > 0 - if necessary
  LNNVL (ROWID, AND<=>
  ORDER BY ROWID
  )
  LOOP
  IF r.journalamt = journalamt_wanted
  SO - This line is a solution alone
  return_list: = r.journalamt;
  EXIT;
  On the OTHER - see if this line belongs to a bigger solution
  remainder_list: = dr_list (entryid_wanted
  , journalamt_wanted - r.journalamt
  r.r_id
  );
  IF remainder_list <> failure_message
  THEN
  return_list: = r.journalamt | ', ' || remainder_list;
  EXIT;
  END IF;
  END IF;
  END LOOP;
  END IF;

  RETURN return_list;
  END dr_list;
  /

  You can use the function in a query like this:

  SELECT EntryID

  SUM (journalamt) AS total_amt

  , dr_list (entryid, SUM (journalamt)) AS extra_drs

  The IDEA

  GROUP BY entryid

  ;

  and it could produce an output like this:

  ENTRYID TOTAL_AMT EXTRA_DRS
  ---------- ---------- ------------------------------
  172903 0
  172863 0
  172899.5.25,.25
  8 987 (no match)
  901 5 2, 2, 1

  Note that when you call the function, pass you the arguemnts only 2.  The 3rd argument is used only by the function when it calls itself.

• I do not understand how to import a project that I created in Final Cut Pro in After Effects

  I do not understand how to import a project that I created in Final Cut Pro that has many sound effects in After Effects. When sharing, choose Apple Pro Res 422, resolution 1920 x 1080, select other - After Effects, it comes as a layer in AE. I don't see how I can change this and do not know, I'm doing this right. Can someone help me please. Thank you very much.

  You can use the file--> menu to import and use the Pro import, but of course there are limits. They are just completely different programs of two separate companies.

  Mylenium

• Line that auto cross

  I was looking at the previous posts regarding how to determine if a LINE intersects itself...

  and the orientation was use sdo_intersection to do a free intersection on the line (i.e. pass in the same line with two args)

  then use sdo_getvertices and County

  I tried to do however get (what I think) is the strange results.

  Two examples:

  In an example here, I have a line that starts and ends at the same point, and the point that has a count > 1 is not the starting point / end.

  Select t.x, t.y, count (*) total

  Of

  TABLE)

  () sdo_util.getVertices

  sdo_geom. () SDO_INTERSECTION

  (select SDO_GEOMETRY (2002, 8265, NULL, SDO_ELEM_INFO_ARRAY (1,2,1), SDO_ORDINATE_ARRAY ()))

  -122.3117777778, 47.4498888889,

  -122.3, 47.45,

  -122.5375277777,48.7926944444,

  -122.3117777778, 47.4498888889

  () as double geom)

  ,

  (select SDO_GEOMETRY (2002, 8265, NULL, SDO_ELEM_INFO_ARRAY (1,2,1), SDO_ORDINATE_ARRAY ()))

  -122.3117777778, 47.4498888889,

  -122.3, 47.45,

  -122.5375277777,48.7926944444,

  -122.3117777778, 47.4498888889

  () as double geom)

  0.005))

  ) t

  Group of t.x, t.y;

  The above returns this point as the point of intersection free?

  -122.5375277777,48.7926944444

  I also have a more complex example that contains a line with many points, I'm expecting TWO x, y of the points as a free intersection points...

  There are THREE of them.  The I wasn't expecting to have a number of 2 is - 122.5903, 48.8563

  Based on below why would '-122.5903, 48.8563' be considered a free intersection point?

  Select t.x, t.y, count (*) total

  Of

  TABLE)

  () sdo_util.getVertices

  sdo_geom. () SDO_INTERSECTION

  (select SDO_GEOMETRY (2002, 8265, NULL, SDO_ELEM_INFO_ARRAY (1,2,1), SDO_ORDINATE_ARRAY ()))

  -122.3117777778, 47.4498888889,-122.2955, 47.7347,-122.293, 47.8181,-122.2904, 47.9015,-122.2879, 47.9849,-122.3108, 48.0519,-122.3332, 48.1356,-122.3808, 48.2197,-122.3788, 48.2864,-122.4015, 48.3701,-122.4247, 48.4371,-122.4732, 48.5045,-122.5222, 48.5551,-122.5209, 48.6052,-122.5448, 48.6555,-122.5435, 48.7055,-122.5431, 48.7222,-122.5418, 48.7723,-122.5903, 48.8563,-122.6422, 48.8068,-122.6434, 48.7567,-122.6198, 48.6897,-122.544, 48.6889,-122.5431, 48.7222,-122.5667, 48.7892,-122.6426, 48.7901,-122.6695, 48.7236,-122.6711, 48.6569,-122.6731, 48.5735,-122.7002, 48.4903,-122.3117777778 47.4498888889

  () as double geom)

  ,

  (select SDO_GEOMETRY (2002, 8265, NULL, SDO_ELEM_INFO_ARRAY (1,2,1), SDO_ORDINATE_ARRAY ()))

  -122.3117777778, 47.4498888889,-122.2955, 47.7347,-122.293, 47.8181,-122.2904, 47.9015,-122.2879, 47.9849,-122.3108, 48.0519,-122.3332, 48.1356,-122.3808, 48.2197,-122.3788, 48.2864,-122.4015, 48.3701,-122.4247, 48.4371,-122.4732, 48.5045,-122.5222, 48.5551,-122.5209, 48.6052,-122.5448, 48.6555,-122.5435, 48.7055,-122.5431, 48.7222,-122.5418, 48.7723,-122.5903, 48.8563,-122.6422, 48.8068,-122.6434, 48.7567,-122.6198, 48.6897,-122.544, 48.6889,-122.5431, 48.7222,-122.5667, 48.7892,-122.6426, 48.7901,-122.6695, 48.7236,-122.6711, 48.6569,-122.6731, 48.5735,-122.7002, 48.4903,-122.3117777778 47.4498888889

  () as double geom)

  0.005))

  ) t

  Group of t.x, t.y;

  I could do something wrong but I wanted to see if the experts knew why these two example of free intersection tests do not seem to return the results, I expect.

  Thanks in advance

  See you soon

  Look at the geometry out of just sdo_geom. SDO_INTERSECTION (no count and not sdo_util.getVertices). Both your examples are closed loops, and the SDO_INTERSECT is producing a reorganization but closed loop, it starts at a different point. By definition, a closed loop has the Summit even at the beginning and at the end, so the starting point will be a number two. The Geometry produced by sdo_geom. SDO_INTERSECTION is a legitimate topological representation of the intersection of the two loops: this is another representation of the object of the geometic.

  I conclude that the SDO_INTERSECTION trick for line self intersections requires more work where the line is a closed loop. If you know that the input is a closed circuit, so I think excluding the last Summit of the intersection works:

  Select t.x, t.y, count (*) total

  de)

  Select sdo_geom. () SDO_INTERSECTION

  SDO_GEOMETRY (2002, 8265, NULL, SDO_ELEM_INFO_ARRAY (1,2,1), SDO_ORDINATE_ARRAY ())

  -122.3117777778, 47.4498888889,

  -122.3, 47.45,

  -122.5375277777,48.7926944444,

  -122.3117777778, 47.4498888889

  ))

  ,

  SDO_GEOMETRY (2002, 8265, NULL, SDO_ELEM_INFO_ARRAY (1,2,1), SDO_ORDINATE_ARRAY ())

  -122.3117777778, 47.4498888889,

  -122.3, 47.45,

  -122.5375277777,48.7926944444,

  -122.3117777778, 47.4498888889

  ))

  0.0001) I

  the double) ii

  , ARRAY)

  t sdo_util.getVertices (II.i))

  where rownum<>

  Group of t.x, t.y

  Incidentally, you should use a smaller tolerance, tolerance 0.005 tell 0.0001 - there are other free intersections that were not given by the SDO_INTERSECTION Tower. The line between - 122.5667, 48.7892 and - 122.6426, 48.7901 is less than 0, 05 - 122.5903, 48.8563

• Hide lines that are zero in report

  Hi all
  
  I have a requirement where the report should display only the rows in the column if it has a value and should not display the lines if it has a value zero. I have tried with the Sql, but could not find any results. I don't know if there is a way through which I can hide the lines that has null in the model.
  
  Please let me know about it.
  
  Thanks in advance!

  say IND is the column you control to null and you do not want the lines where IND IS null

  You can have the code as below

  G_1 is the loop and IND is the control column

• Lines that do not migrated because of filters are saved somewhere?

  Hi all
  
  According to my understanding, if I put a constraint on the target table in the models and use the control flow through a seam in the interface, the lines that do not meet the constraint get connected to the table of errors E$.
  
  I want to know that if I put some filters or join conditions on the source, the lines that are not migrated because of these filters, do they get connected anywhere. Until now, I used to check tables $ ca and my source and see that all lines have not migrate but is there any other table where the journal is maintained?
  
  Thank you and best regards,
  Prerna

  Hey Loren,
  You cannt see these documents. You must look in the backend... Let's say you have a filter SAL > 100 then you will get all information abot SAL<100. if="" you="" need,="" then="" you="" create="" one="" refresh="" variable="" based="" on=""><100 and="" get="" the="" count(*)="" or="" other="" possible="" information="" as="" per="">

  Bottom line: ODI will occupy on those records satisfying the condition not others.

  Thank you.
  http://bhabaniranjan.com/

• How to make a line that looks like a street?

  I'm trying to zoom by something that resembles streets using 3d and the camera layer. If I create a long rectangle, once I'm in 3d there is no way it will be long enough stretch the window. Finally, it will look like a small stick. so I need a way to make a line that is locked at both ends

  Simply use a 2D layer and distort with corners, transformation or anything that you fancy effects. Or use the beam effect...

  Mylenium

• Why Adobe Reader search for items in a Document that are clearly there?

  I searched regular and advanced a document for words I knew were there and Adobe Reader told me they weren't there. I was looking at a single instance of the item I wanted and Adobe Reader told me he wasn't there, but I was looking directly at a place where the words, that I'm looking. Adobe Reader tells me that it is not in the document of anywhere, which is a lie because I can read and the words for which I searched are there at least once, but Adobe Reader tells me that the words for which I am looking are not in the document at all. This is not the first time that this exact thing happened to me with Adobe Reader, I'm simply tired of taking the extra time to my day to manually search for a document when there are supposed to be tools to do this for me. Sorry to repeat my problem two times but I'm frustrated and I want to make QUITE clear. Can someone help me?

  Yes, the problem is that the document is from a scan. When I resulting in Acrobat, the text becomes available. You can download the trial version of Acrobat to do it yourself.

• import of comps that reference the same project files without doubling the size of the ae file?

  Hello, I am currently working on a major project that has me constantly to reimport old comps that reference the same project files. The thing is that when I do this AE re-imports all project again files when it is attached to the computer that I imported. My question is is there a (fast) way to remove references of redundant project in the project tab file, or there at - it another way to import a model without creating this double entry in the project tab?

  Thank you guys!

  Sorry, Yes, you can do this by using the command consolidation (file > consolidate all sequences).

  This will remove all duplicates.

  See this Help on AE page for more information.