Imported slides are smaller than the originals

Similar Questions

• Imported clips are shorter than the originals (points are configured before you import)

  After you import the folder of clips, some of them are shorter than they should be (from a few minutes). For some reason any the of in and out is already fixed on them and I can't change it. Look at the pictures on my camera (Canon xf100) all images are here.

  * Note that I imported these images on a different hard drive for another project before this current project... it is possible that some meta data has been transferred?

  Well I don't know why he was doing this... However, I have just re-copied the pictures from my camera with Canon XF utility this time. It works now. Thank you for taking a good glance!

• I need to force the width of the columns to values that are smaller than the minimum preset (1 058 mm) indesign.

  Jongware provided two ideas to force the table rows and columns in the heights and widths smaller than the Indesign predefined 1.058 mm.

  For lines: app.selection [0] .properties = {autoGrow:false, height: "0.5 mm"};

  And for columns he sugested: app.selection [0] .width = "0.5 mm;

  The problem is that, while the code for lines works perfectly, for the columns return a error "Unit expected, but received 0.5 mm" I'm under Indesign cs6. Someone has ideas to help fixing such script, or maybe a different approach? Thank you!

  
  

  
  

  HM, other than the use of InDesign CS5.5 or underneath with scripts?
  Or export IDMS, open and edit (by script of course, it is just a plain text file in disguise), place IDMS and replace the table?

  (IDML as an alternative)

  Laughing out loud

  Uwe

• make an an area smaller than the entire project does not work

  I recently installed 8 PE and converted from the original version of PE3 a project which is about 1 hour 40 minutes. I want to burn to a DVD and added some finishing touches.  Everything was fine, except that the entire project had a red line, so I decided to make the project (I couldn't see much if anything) which I did, and it took more than two days is more slower!  (35 video clips and 123715 images) OK, it finally finished so I saved the project.  Look at one was much better, if it's not perfect, but watchable.  So, back to the disk space, I deleted rendering files. Imagine my surprise when as soon as I did the red line is back, and intolerable listening to the edit mode.  The impression I got from PE8 help is that you could remove render after render files, as their goal had been finshed. I can't wait 2 days, so to accelerated rendering, I thought I would in small pieces, say 5 minutes each.  But even if I change the area of the workspace such as defined by the gray bar, (grabbing the end and drag it to a much smaller size - to the beginning of the project for example |) it begins to make the entire project again! what I am doing wrong?

  What you're looking for is the Windows address book (WAB, work area Bar). You can then assign the share of exports/only the area work for most export formats. Don't forget to do. It is usually with a drop-down menu, or a checkbox.

  

  Good luck

  Hunt

• imported video is smaller than the original

  When I import videos from legacy video is not in the original format.  The video seems to be cropped, not only NOT wide, but the edges are cut off.

  Search for the term, "pixel aspect ratio compensation."

• How to print tiles that are smaller than the paper size

  I want to tile print a large image in several sheets of 11 x 17 using print tiling, but I want that the area of the image 10 x 10. In other words, I want to split my image into tiles of 10 x 10 print on paper 11 x 17. I'll shoot the paper after printing. I tried customizing the imageable area in the print settings, but the image 10 x 10 ends by stretched in the sheet 11 x 17. Is there a better way to do it?

  You can configure the work plans of 10 x 10 and have them throughout your work exactly how you want to print them.

• Photoshop brush strokes are much smaller than the slider, need to do the same thing.

  My photoshop brush, pencil and duplicate tracks are smaller than the slider, making it very difficult for accuracy. Do not know what made them change, but you want the slider and the strokes are the same.

  

  I tried different settings in the dialog box of the brushes, with parameters of advanced differenc, etc., without any result. Also, tried different settings of the preferences/slider. No luck.

  Help!

  In the preferences (cmd-k) > cursors > painting, the parameter sliders should be Normal.

  'Reset tools' as described in the habit of posting 1 help. Have you tried yet?

  Gene

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• "this computer's hard drive is smaller than the original hard drive shipped.

  Computer model: p7-1058uk Hi, I'm trying to reinstall my windows recovery kit 7 I bought from best2serve my OCZ Vertex 60 GB ssd Series 3. But I get this error message "this computer's hard drive is smaller than the original supplied hard disk. The recovery process cannot continue"I actually managed to install this recovery on the same front drive kit when I bought first. Any ideas as to why its not working now? I have formatted the ssd drive, deleted the partition and creates a new one with a program called gparted. I can't access my computer until I can reinstall this recovery again kit. Thank you

  Hello:

  I'm surprised that the same recovery disks set worked the first time.  Unfortunately, the error you are getting is the norm. I don't know any solution other than to get a bigger hard drive to the approximate size as the original.

  I have a solution for you if you want to use...

  If you can read the product key 25 character Windows 7 on the sticker COST Microsoft on your PC, you can download single files Windows 7 ISO to burn it to a DVD for the version of windows (Pro, home) that is installed on your PC, and which is listed on the sticker COST Microsoft on the PC.

  You must also select the language installation provided with your PC, or the product key will not work.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program.

  Use the 25-character product key to activate the installation. It's good for the 32-bit or 64-bit version of W7.

  Then go to the support page and drivers for your PC install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• new cDAQ-9178 chassis was smaller than the cDAQ-9172 old buffer?

  Digital waveform features:

  Waveform acquisition (DI) FIFO for cDAQ-9172: 2047 samples

  Waveform acquisition (DI) FIFO for cDAQ-9178: 127 samples per slot

  This means that the new HW (9178) has a much smaller than the old buffer (9172)!

  I want to run a correlation over generation/acquisition at 2 MHz with 2000 samples. Does this mean that the new chassis will not be able to acquire the whole of the data (I use a NI 9401 module inside the chassis)?

  FIFO sizes are misleading and not a true indicator of the chassis supporting the streaming is not the single buffer.  We did some tests comparing the latest and cDAQ-9172 chassis.  You will not notice the difference, especially with your application to a finished task of 2 000 samples at 2 MHz.  With 2 000 samples, you can run your DI task on your chassis cDAQ-9178 at 10 MHz if you wanted without problem (don't try with continuous or even finished tasks).

  The only time where the FIFO size really comes into play is when you run a primary task at high rates, say > 5 MHz, even if it is system dependent.  At these speeds a FIFO that is deeper 2 000 samples you buy only tens or hundreds of additional microseconds when Windows jitter is measured in milliseconds.

  I would be very surprised if there is a practical application that worked on a cDAQ-9172 chassis which did not work on newer USB cDAQ chassis.

• The buffer is smaller than the specified size.

  Has done a session of webniar via GoToWebinar, that has been saved as a Windows Media audio/video file. It has been downloaded to my desktop without problem, and the original file plays on Windows Media player. I need to send the session recorded with colleagues across the Canada. It's a big file to 55.5 MB, I usually use YouSendIt.com and have done so successfully with the same type of files in the recent past. This time, when I send the file and download it via YouSendIt, it records on my desk in a 55.5 MB file with the correct file name, but when I try to open this file, I get an error message: "the buffer is smaller than the specified size. Any ideas on what may be the problem. How this can be solved?

  Best regards

  Deborah

  I do not have the fix for YouSendIt, but it may be worth trying to
  Download your file on SendSpace... then just send download
  link to your recipients and they can download the file to their
  own convenience.

  "SendSpace.
  http://www.sendspace.com/

  It's very simple... of the SendSpace site steps
  are just what you have to do.

  On the left, click on the Browse button and it will open a window which
  allows you to access the files on your hard drive.

  Go to your video file and select it.

  On the left, click on the download button.

  When the download link appears... left click on the copy button.

  Share this link with your recipients.

• The screen is smaller than the size of the screen. Help!

  I hit a button on an accident (CTRL with Shift or CTRL with something else) and the screen went black. Now, the screen size is much much smaller than the size of the screen. There is a good inch margin 2 right and left. How can I return the screen to normal size (to match the screen)?

  Hi Rhamad,

  Thank you for visiting Windows Vista Microsoft answers forum.

  Your monitor settings have been changed, and you must set its value by default. To set the default settings screen, you must use the buttons near the power of the monitor buttons. You can take the help of the manufacturer of your computer to do or if any manual was provided with the computer then you can refer to that as well.

  You also try to open graphics settings and change the display settings.

  To change the display settings, follow the steps below:

  1. the right in the empty space on the desktop and select Properties. 2. click on the settings tab. 3. click on advanced. 4. click on the tab on your computer graphics card. 5. you will need to make changes in the advanced settings under display settings.

  Alternatively, you can perform a system restore to a date when the display settings were normal.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish. You can visit the link to the KB Article for reference: http://support.Microsoft.com/kb/936212

  Please let us know if it helps.

  Thank you and best regards,
  David

• Problem w / window size is smaller than the size of the screen

  I recently had an automatic installation of Vista sp.  Don't know what version/sp.  After restarting my laptop, the window size is now smaller than the window size of the screen.  It looks like HD video with a 1 1/2 in. vertical black band on the left and right side of the screen.  How can I fix it?

  Hello

  Have you tried to adjust the resolution in the settings of the Control Panel/customize / display? If there is only limited adjustments available, you will probably need to reinstall or update your graphics card driver. This is best done with a download of the manufacturer of the device, not windows update. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Configurator error 'the hard size in the first string of RAID must be smaller than the drive selected in the second Raid channel'

  Hello, I hope this is the forum for this question rigth.

  I am trying to set up a new T330 for one of our customers, and I want to use a Raid 1 + Raid 1 configuration. First raid for the operating system and daily backups, second raid for a database.

  I tried the C15c configuration, but I always get the error "the size of the hard drive in the first RAID channel must be smaller than the selected hard drive in the second Raid channel".

  Is it really necessary to buy an SSD that is bigger than the HD used in the first Raid? The DSS may be relatively low, but I need more space for the backup.

  Is there an alternative solution to this?

  Thanks in advance,

  Stefan

  Yes. In fact, you can mix drive types on the SAME channel... they just cannot be mixed in the same virtual disk (table).

• The android app icon is smaller than the native applications on Dev Alpha

  It is somehow related to http://supportforums.blackberry.com/t5/Android-Runtime-Development/apk2bar-resizes-the-app-icon-to-8...

  However, even if I have difficulty icon resized, changing the bar produce and pack a 150 x 150 icon, on DevAlpha (10.0.9.388) the icon looks like smaller than the icon of a native application (if WebWorks or Cascades). I also used the setting - os to target only the BB 10 but without results.

  Is there something that I need to specify the apk2bar command?

  Thanks for your help.

  This has been fixed in DevAlpha 10.0.9.1103.