Problem w / window size is smaller than the size of the screen

Similar Questions

• I get an error code of 1311 with Windows Installer to appear on the screen when I try to navigate.

  the Windows Installer

  Presentation of adobe acrobat 7.0

  Error 1311. Word of source file found

  c:\Program files \adobe\acrobat 7.0\ configuration files\acropro\enu\data 1.cab. Check that the file exists and that you can access.

  Original title: Error 1311, windows installer appears on the screen, when I Browse.

  Hi-mountain dew,

  Thanks for posting your query in the Microsoft Community. It seems that you have a problem with Windows Installer pop up on the screen while browsing. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  We start with a few questions-

  (1) do you get this pop-up when you navigate to a specific Web site?

  (2) you are trying to install Adobe Acrobat 7?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method-

  I would have you see the article from the adobe website as he talks about the Error 1311-

  Error 1311, 1335, or 2350 "... not found Source file data1.cab ' | Install Adobe products | Windows

  http://helpx.Adobe.com/Creative-Suite/KB/install-Error-1311-1335-or.html

  We know if you need help. We will be happy to help you.

  Thank you.

• The buffer is smaller than the specified size.

  Has done a session of webniar via GoToWebinar, that has been saved as a Windows Media audio/video file. It has been downloaded to my desktop without problem, and the original file plays on Windows Media player. I need to send the session recorded with colleagues across the Canada. It's a big file to 55.5 MB, I usually use YouSendIt.com and have done so successfully with the same type of files in the recent past. This time, when I send the file and download it via YouSendIt, it records on my desk in a 55.5 MB file with the correct file name, but when I try to open this file, I get an error message: "the buffer is smaller than the specified size. Any ideas on what may be the problem. How this can be solved?

  Best regards

  Deborah

  I do not have the fix for YouSendIt, but it may be worth trying to
  Download your file on SendSpace... then just send download
  link to your recipients and they can download the file to their
  own convenience.

  "SendSpace.
  http://www.sendspace.com/

  It's very simple... of the SendSpace site steps
  are just what you have to do.

  On the left, click on the Browse button and it will open a window which
  allows you to access the files on your hard drive.

  Go to your video file and select it.

  On the left, click on the download button.

  When the download link appears... left click on the copy button.

  Share this link with your recipients.

• The screen is smaller than the size of the screen. Help!

  I hit a button on an accident (CTRL with Shift or CTRL with something else) and the screen went black. Now, the screen size is much much smaller than the size of the screen. There is a good inch margin 2 right and left. How can I return the screen to normal size (to match the screen)?

  Hi Rhamad,

  Thank you for visiting Windows Vista Microsoft answers forum.

  Your monitor settings have been changed, and you must set its value by default. To set the default settings screen, you must use the buttons near the power of the monitor buttons. You can take the help of the manufacturer of your computer to do or if any manual was provided with the computer then you can refer to that as well.

  You also try to open graphics settings and change the display settings.

  To change the display settings, follow the steps below:

  1. the right in the empty space on the desktop and select Properties. 2. click on the settings tab. 3. click on advanced. 4. click on the tab on your computer graphics card. 5. you will need to make changes in the advanced settings under display settings.

  Alternatively, you can perform a system restore to a date when the display settings were normal.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish. You can visit the link to the KB Article for reference: http://support.Microsoft.com/kb/936212

  Please let us know if it helps.

  Thank you and best regards,
  David

• Configurator error 'the hard size in the first string of RAID must be smaller than the drive selected in the second Raid channel'

  Hello, I hope this is the forum for this question rigth.

  I am trying to set up a new T330 for one of our customers, and I want to use a Raid 1 + Raid 1 configuration. First raid for the operating system and daily backups, second raid for a database.

  I tried the C15c configuration, but I always get the error "the size of the hard drive in the first RAID channel must be smaller than the selected hard drive in the second Raid channel".

  Is it really necessary to buy an SSD that is bigger than the HD used in the first Raid? The DSS may be relatively low, but I need more space for the backup.

  Is there an alternative solution to this?

  Thanks in advance,

  Stefan

  Yes. In fact, you can mix drive types on the SAME channel... they just cannot be mixed in the same virtual disk (table).

• Why is my file size "Combined PDF" smaller than the original files?

  Hello!

  I try to combine two individual PDF files into a single PDF file. Each file is 32 MB, but when I use acrobat to combine, the newly created "combined" file is only 19 MB. I think I took the necessary steps to ensure no degradation that happens (e.g. large selection size of the file in the Panel options), but I'm still puzzled as to how the two files can be set up as one and be smaller than the two separate files with out any compression. What Miss me?

  Thanks in advance!

  When you combine a file, it performs an operation of "save under".  This rewrites all the PDF object in the single file and is supposed to clean the file, while the single files may have had several saves which when you look at the inner workings of the PDF file simply add at the end of the file.  In other words, you get a file more cleanly written and optimized is also recorded for a quick display of Web pages.

• size smaller than the smallest brush, you can choose?

  is it possible to have the smaller than the smallest brush size, which you can choose? BTW should be smaller size of the brush to choose.

  Hi all

  The latest version of animate CC allows to choose from a wide range of sizes of brush along with other improvements

  See here: new feature summary (June and August 2016)

  Improvements to the Brush tool in animate CC

  Download latest update CC animate via Creative Cloud application and try it!

• Photoshop Windows are open bigger than the size of the screen

  I have a new iMac 27 inches 5K and use creative cloud. When I opened a window in photoshop, it is larger than the screen so I can't reach the bottom right to resize to fit. How can I fix it?

  Hello

  Please check if you have the game scale of UI user interface on 'Auto' or '100 '.

  Otherwise reset the Photoshop preferences

  Press and hold the CTRL, ALT, shift (Windows) / command Shift (MAC) Option in starting up of Photoshop.

  Select Yes

  Note:-make sure you backup Presets/stock/Modified Workspaces/Plugins (if any)

  Thank you

  ~ Assani

• new cDAQ-9178 chassis was smaller than the cDAQ-9172 old buffer?

  Digital waveform features:

  Waveform acquisition (DI) FIFO for cDAQ-9172: 2047 samples

  Waveform acquisition (DI) FIFO for cDAQ-9178: 127 samples per slot

  This means that the new HW (9178) has a much smaller than the old buffer (9172)!

  I want to run a correlation over generation/acquisition at 2 MHz with 2000 samples. Does this mean that the new chassis will not be able to acquire the whole of the data (I use a NI 9401 module inside the chassis)?

  FIFO sizes are misleading and not a true indicator of the chassis supporting the streaming is not the single buffer.  We did some tests comparing the latest and cDAQ-9172 chassis.  You will not notice the difference, especially with your application to a finished task of 2 000 samples at 2 MHz.  With 2 000 samples, you can run your DI task on your chassis cDAQ-9178 at 10 MHz if you wanted without problem (don't try with continuous or even finished tasks).

  The only time where the FIFO size really comes into play is when you run a primary task at high rates, say > 5 MHz, even if it is system dependent.  At these speeds a FIFO that is deeper 2 000 samples you buy only tens or hundreds of additional microseconds when Windows jitter is measured in milliseconds.

  I would be very surprised if there is a practical application that worked on a cDAQ-9172 chassis which did not work on newer USB cDAQ chassis.

• "this computer's hard drive is smaller than the original hard drive shipped.

  Computer model: p7-1058uk Hi, I'm trying to reinstall my windows recovery kit 7 I bought from best2serve my OCZ Vertex 60 GB ssd Series 3. But I get this error message "this computer's hard drive is smaller than the original supplied hard disk. The recovery process cannot continue"I actually managed to install this recovery on the same front drive kit when I bought first. Any ideas as to why its not working now? I have formatted the ssd drive, deleted the partition and creates a new one with a program called gparted. I can't access my computer until I can reinstall this recovery again kit. Thank you

  Hello:

  I'm surprised that the same recovery disks set worked the first time.  Unfortunately, the error you are getting is the norm. I don't know any solution other than to get a bigger hard drive to the approximate size as the original.

  I have a solution for you if you want to use...

  If you can read the product key 25 character Windows 7 on the sticker COST Microsoft on your PC, you can download single files Windows 7 ISO to burn it to a DVD for the version of windows (Pro, home) that is installed on your PC, and which is listed on the sticker COST Microsoft on the PC.

  You must also select the language installation provided with your PC, or the product key will not work.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program.

  Use the 25-character product key to activate the installation. It's good for the 32-bit or 64-bit version of W7.

  Then go to the support page and drivers for your PC install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• The display is larger than the screen. Zoom-out a frew times it cut OK how should I make it smaller?

  Recently, the size of the screen has gotten bigger than the screen and I have to either drag left/right to read it or (better) use the zoom to reduce to fit. How I put it so that it always fits without my nothing? It used to be like that!

  It is possible that the screen is too wide or too high.

  • Use Restore or expand in the context menu of the taskbar icon to set the focus to the Firefox application if you do not see the window of Firefox.
  • Open the system menu of the window of Firefox via Alt + space and see if you can move and resize the window (use the arrows on the keyboard).

  If it works, then first close all other open windows of Firefox and then close Firefox via "file > exit/Quit" to save the setting.

  If the above didn't help then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Windows Update is stuck on the screen check updates for more than an hour.

  Original title: Windows Update problems

  I just got a new update for Windows 7 and got all my drivers installed. However, Windows Update is stuck on the screen check updates for more than an hour. Everything works except that, and I don't know how to fix it. It has updated two things: the Windows Update Agent 7.6.7600.320 and update for Windows (KB958488). He continues to seek constantly and never find anything.

  Please leave for 5 or 6 hours and if he doesn't find anything:

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  kathleenl62675526 wrote:

  Hi Tanuj,

  There is no place to change fonts.

  You must go to the LR Edit (or Lightroom on Mac) menu > Preferences > Interface > choose 'Options' in the menu 'panels '. There should be a setting for the font size of Interface. You will need to close and restart LR for the font change are taken into account.

• Panoramic of document while smaller than the canvas image?

  Hello

  In normal display tabbed mode, whenever the zoom level is smaller than the canvas size, it seems that the Pan is not allowed. I had actually fallen on for Photoshop CC workaround before that, but he had lost the info after a re - install. I have for the panorama as shown with a screen of small image with just the SPACEBAR button before that.

  Can someone show me how to do this again? Maybe some parameters of its file change or something?

  If update or download photoshop cc2014.2.0, there is a new preference that allows to enable/disable the module