left click of the mouse program

Similar Questions

• Left click of the mouse does not respond in the office and I could see 2 together (Picture) Office

  Everything works well today that the left click of the mouse is not responding on the desktop (icons does not meet the double click). Right click works ok, and left click works well on programs and in the taskbar.

  Weird things here, it's that I can see two desktop at the same time.

  I have attached a picture.

  Can someone help me?

  Thanks in advance.

  

  I got disabling the system restore, so I can't go back to a good version.

  Turn off the system restore makes things much more difficult. Your problem is probably due to an inappropriate registry setting. You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.

  Check the date of the file C:\Windows\System32\config\regback\System. It precedes the date when you became aware of your problem? If so, follow these steps:

  1. keep tapping F8 during the first phase of startup.

  2. Select repair in the menu that looks like this.

  3 log in as administrator if you are prompted.

  4. Select repair when prompted.

  5. Select the command line in the menu that looks like this.

  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands exactly:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  8 type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Left click of the mouse stop

  Hey I'm playing this game on the net where I'm supposed to click with the mouse like a thousand times to make my character to do things.

  is there a way I can stop the left click of the mouse to work when my character reaches a certain area.
  my mouse click but when in the game it shows one you know as "level 70 boss appeared" I want as my left click of the mouse to stop the work. You should read this if a level higher than 20 appears to stop working.
  I have to click a thousand times as many times that I miss on these great events of the mouse. But after like the fight against what I want to do functional left-click again. How can I do?

  Hello

  Thank you for your response.

  As the problem occurs in Google chrome, I suggest you to contact the support of Chrome for better assistance on this issue.

  http://support.Google.com/chrome/?hl=en/

  If you have any further questions on Windows, feel free to let us know. It is our pleasure to be of service.

• Whenever I have press and hold to my left click on the mouse button, it automatically highlights everything from this point to the top of the page

  Whenever I press and my left click without releasing, it atomically highlights everything from this point to the top of the page. Also, note if I'm now left click on the scroll bar, it goes back to the original location, even when I try to drag it upwards or downwards.

  Open internet Explorer and the problem does not occur there.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

• System Restore won't work, drives available: HP (C :) (Missing)?) Left click on the mouse also stops randomly works, works fine in safe mode.

  My computer is upward, slow-running and my mouse will just randomly stop left click. I can switch the service so click right not left click function, but then cannot do the right click function. I had created a restore point before installing a program called Cain and Abel on my computer and it was just a couple of days.

  When I tried to do a restore, I got a message saying I needed turn the system restore. Then my computer froze so I restarted it and selected "System Recovery" and tried to do a restore to the point that I had created before that Cain has been installed. I got a message saying that the restoration has failed then I restarted mode without failure. When I restarted in safe mode, both left and right click was working again but I got a message saying that something has been altered (I didn't write it down so you do not know what it was). He says to run CHKDSK, which I did and then the computer seemed to work again.

  This is temporary, I lost my left click again and now have swung it for do the right click, left click is supposed to do, but really need to be able to do both types of clicks.

  I go in to the restoration of the system, and it says I need to turn it on. When I go into system properties to turn on, the disc I want to activate to says "HP (C :) (Missing)) ' what this means and how do I do the restore point I have created 2 days ago from work?

  Hi kar fam.

  The question you posted seems to be hardware related. Unfortunately, we are unable to help with changes to the hardware. For more assistance, contact your computer manufacturer.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Left click of the mouse, Windows 8

  Hi, I am angry right now, I'm so angry.

  But let me explain why, so the version of windows 8, when I click on my mouse left, it does not send through, I would have either double click or click once it's really hard for the mouse shit to send a signal to the computer to click on something. I tried the speed of the double click mouse options and that all this grass. So I need urgent help.

  Thank you.

  If this happens everywhere, looks like mouse is defective. Try to set it if it's not a touchpad

• Left click of the mouse does not work

  I recently got a "microsoft wireless mobile mouse 3500. For some reason any the left click will not work and won't be the Center wheel. The right click works perfectly well. I havnt done anything to harm the device. I checked the manual to see if something could help me here. I also looked on the websites and checked if others had the same problems. I couldn't find anything that could fix. Could someone help me please?

  You have installed the latest Web site driver below:

  http://www.Microsoft.com/hardware/en-AU/p/wireless-mobile-mouse-3500#support

  If SO and it still does not work, as it is again return to place of purchase and replace.

• After using my Firefox browser to access my Yahoo mail, I don't and then disconnect. Left click of my mouse will not sign off the coast. I have to close my computer to close my e-mail address. How can I fix?

  I'm unable to sign my e-mail at Yahoo. Make a left click on the mouse does not close my e-mail address.

  Hi ampterson.

  It could be that an add-on is causing this problem. First, click on the Firefox button > help > restart with disabled modules. If this solves the problem, it means one of your Add - ons is the cause. See Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems for steps to know which.

• I can't navigate between tabs with a click of the mouse since I installed the latest version of Firefox

  Running worm 30. which is fine, but I can't switch between open tabs with a left-click of the mouse over the tab that I want to activate as I did for years. Use Ctrl-Tab place. Don't like this. This problem started with this version of FF.

  Try Firefox Refresh - reset the settings and Add-ons and if this does not resolve your problem, you can consult this article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems . I hope this helps.

• Clicks of the mouse do not work in IE9, Excel, iTunes and other programs.

  Clicks of the mouse are not working.  IE9, Excel, I-tunes and a few other programs.  It sometimes takes several mouse clicks, or in the case of IE9 when you activate the address bar or Favorites or even try to select a checkbox it seems that you must hold the button of the mouse down and after a few seconds, it will recognize the command.  With favorite IE9 you must hold down the mouse button and drag down to the place wherever you need to be communicated, then click on?  In Exel, the mouse cannot select multiple cells, in other programs her taking mulitple mouse clicks to highlight & copy text in the text example I've copied below from Microsoft answer Forum - I followed the instructions below and it did find and fix some problems, but there were others, he could not correct?  They were listed in another file, but I don't remember the name of the file, or how to access it?  I have run Norton 360 on my system and a complete analysis will detect all viruses?  Please advise?

  Thank you for using the Microsoft Answers forums. I suggest that you run the System File Checker. To use the tool (SFC.exe) System File Checker. To do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Thank you

  Andrew Pugh

  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Why when I click with the left button of the mouse on the unique tool, you open the window with the other instruments?

  When I click with the left button of the mouse on the unique tool, open the window with the other instruments

  
  

  Mohito Hi, this morning, I solved the problem by trying to support. I realized that the problem was in mice, because the click rate is at its highest level, and then click the instruments was like if he did 2. I will now set the minimum speed of the clicks.

  Thank you

• How can I disable swapping when I left click on the button of the mouse twice in the color pencil tool?

  I'm annoyed by the fact that the primary and secondary colors are reversed when I click on the left button of the mouse twice in a row, when you use the pencil tool. Is it possible to disable this feature and possibly return the old function where the left button of the mouse is the primary, right mouse color is the secondary color?

  If this isn't the case, shortcut key combination should I use that prevents colors need whenever I paint with the pencil tool? Thanks in advance.

  Which be caused by having Auto erase checked in toolbar options of the pencil tool.

• LabView can generate with a click of the mouse to another program?

  I have an old PTZ camera and need to control the panorama functions / tilt but cannot interface for the camera software. I can control the camera through the old interface of the screen. Is it possible to generate a signal indicating that the operating system (Win XP) would interpret as a click of the mouse on the screen of the camera interface?

  Thank you

  Hi Rick,

  It's a bit of work, but the windows API provides functions for control of the mouse.  There are many available positions on this point, for example...

  I don't know if .NET offers any mouse event tools - if yes, it would be simpler.

  There are tools called 'Macro Recorder' that you could use to save some actions keyboard and/or mouse - and call these actions later using LabVIEW.

  If, by chance, the camera controls are sent via RS232, it would be possible to 'sniff' the comm interface and understand what the syntax is - then you wouldn't need the old application at all!

  Chance/Cheers.

• Satellite C660 - click of the mouse does not work

  Hello

  I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

  I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

  Any ideas please?

  Hello

  You have the same problems with a mouse external or just the touchpad?

  If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

  Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• MacBook Air meets does not to the clicks of the mouse or trackpad

  There must be something serious to the software (or firmware?) on my MacBook Air. He stopped to answer all of my keyboard clicks or trackpad today. The two input methods work very well in the Bootcamp partition / Windows 8.1.

  I restored Time Machine (use only the keyboard commands) and this did not fix it. I have reset the PRAM and no improvement. At first there was no edge to restarting with the Apple logo, which appears. Then I formatted the hard drive, all wiping (once again in control of the recovery mode + are that the left click will not work). Reinstall OS x is not possible that the final click required for installation on the hard disk requires a mouse click and can not be triggered by keyboard commands I can find.

  I tried to do it in single user mode, but could not get the unix commands to allow arbitration of disk mode (no idea what it is; just found online).

  I am currently looking for another restore from Time Machine.

  Any ideas? This doesn't seem to be a hardware problem as the Bootcamp partition has functioned well before I nuked it.

  I managed to reinstall OS 10.10, but during the final stages of reinstalling my judgment of clicks of the mouse/trackpad works again after having worked briefly to the recovery partition after formatting the drive. Something is be re-installed inhibits clicks work. I restore to a clean installation with no software installed so I don't think this other program or driver. There is a deeper level of formatting the drive I can do?