Impossible to access the records after you have reinstalled windows 7

Similar Questions

• I have no sound on the computer after you have reinstalled Windows.

  Hello

  I just reinstalled Windows 7 on my PC and I was a little proud of myself, have internet, email, video works... but then no sound. :(

  So the most common answer seems to be getting the correct driver.

  I have a motherboard ASUS P7-P55-M, I went to the ASUS website and got the best audio driver for this mobo, which is: VIA_Audio_V6019500_XPVistaWin7.

  I therefore installed that, and then one encouraging thing is that DURING the installation of this audio driver, my speakers made a sound that made me think that they are the least recognized, or this audio driver is at least to see them there?

  But then after the reboot, I still have no sound.

  So I tried to look at the specs for this mobo, and saw the audio chip itself is VIA VT1708S. So I followed the links and found a driver for it, but after I installed that now, it seems that it is just a version still newer same driver (the preceding being 9500, 10200 or this is what it looks like.)

  in any case, this newer version and the one outside the site of ASUS, as well as older drivers, I think, just install a version or one that other: HD VDeck.

  Common responses include at this time something about the Realtek drivers (can't see how tho so it shall not apply, or using those on drivers THROUGH), or Windows Troubleshooter, or something in the playback functions, or an old or Windows driver conflict with these new?), but I have tried these things (or I thought I did lol).

  But I still have no sound on my speakers.

  Very frustrating because it feels like I'm 98% done my re - install, and it looks like its just some simple setting somewhere in Windows or this HD VDeck that will get things working.

  Any help would be greatly appreciated! :)

  Original title: speakers work not after fresh windows 7 installed, please help!

  Hello

  Thank you very much for your answers. :)

  I formatted completely, no folder Windows.old and also no printed dxdiag, I myself for the kicks, which I'll make sure to have next time lol.

  Device Manager is fine, I went over that and basically each sound option of Windows or menu, that I could find, which made me think the problem somewhere else.

  So I took the suggestion of Nirmal and used automatically diagnose it and fix the link he provided. Suggestions of the convenience store has really helped as much as he said everything has been updated, or was not a problem, but what I noticed, it was what a screen in the Microsoft Fixit program running:

  Resolution of Windows Audio playback problems

  Which of these devices you want to troubleshoot?

  Select the device that you are having problems with. If the device is not listed, select device are not.

  Speakers - VIA High Definition Audio (the connector for this device is located on the front of the computer).

  Interface SPDIF (TX0) VIA High Definition Audio (the connector for this device is located on the open or pull-open sliding panel at the back of the computer).

  Output HDMI AMD - AMD high definition Audio Device (Connector for this unit is located in the HDMI connector).

  Unlisted device.

  Now when I continued from here, I don't have all the answers useful, but it makes me start thinking about the plugs/connectors themselves, rather than the drivers or anything else.

  So, I've discovered that my audio interface (HD VDeck) installed with the audio drivers of my motherboard, has no options is disable the jacks on the front panel, or the possibility of re - configure jacks how you want. If you want your speaker system to get out the same plug as it was before, you MUST be able to reconfigure your catch. Otherwise, making default value for your speakers, according to the drivers from the manufacturer of your, is actually not the green plug, I used, but among the other instead. This other outlets, or maybe even just the front headphone or microphone jack will work instead.

  So to summarize:

  If you did a clean install of Windows 7 (or a similar version), and that you have installed the drivers of your sound and re-configured your settings Windows Sound (speakers as value by default, etc.), then you did everything up to this point correctly. At this point, you MUST have an audio program like Realtek, which allows you to reconfigure or disable the catch. Otherwise, your speakers, by default, is no longer just the audio jack green we are accustomed to, but rather another "back". You MUST use the other rear socket (most likely the speaker FRONT plug), or one of your jacks façade, in plugging your speakers instead.

  This may sound funny, but this workaround works, unless you get an audio program to reassign the normal green audio jack.

  I looked at hundreds of messages on the last few days trying to get this resolved. I wish I could go back and share this info with all these people now lol.

  Thanks for the info, and please share with all those who have problems with Windows reinstall and sound.

  Kind regards

  Brad

• Unable to connect to the internet after you have reinstalled Windows

  It came with Vista on it, but it is basically screwed up... There was no recovery disk... so I did a clean install with a XP disk... all right except that I can't get on the internet... In the OTHER DEVICES ethernet controller PCI device, PCI Modem, SM Bus controller, unknown device and video controller (VGA Compatible) are all highlighted with a yellow question mark... Try to find the driver with my son's computer, but everything I find says that there in an internet search... until this problem is fixed, I can't connect to internet... Help, please! Thank you!!

  Hi Dreman1970,

  ·         What is the brand and model of the computer?

  Of yellow exclamation, PCI Modem and other devices Ethernet controller describes the drivers necessary for the device are missing.

  I suggest you use another computer connected to the internet to find your manufacturer's Web site. Then you need to find the driver to download links for your computer model. Once you have downloaded the drivers, you can transfer them to your computer and install them. Once the drivers are installed, you will be able to connect to the internet.

  See the following article for more information on installing the drivers:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  Let us know if that helps.

• How can I disable the basic after you have reinstalled Windows 7 Home Edition with BitLocker Drive encryption?

  Original title: Bit Locker Drive Encryption problem

  . I bought my laptop with windows 7 home basic operating system. After 1 year my Software Engineer friend makes me Express Windows Ultimate.Then upgrade after a few viral problems, I recovered my system, then I went home base only. But when I was working with Ultimate, I used Bitlocker Drive Encryption.But when I got to the Home Basic edition, I couldn't stop this disc encryption. So please help me to stop temperature Drive Encryption.

  Hello

  Follow the described steps mentioned to turn off BitLocker.

  1. open the Bitlocker Drive encryption by clicking the button of theStart, clickingControl Panel, clicking Security, and then click Bitlocker Drive encryption.

  2. do one of the following:

  o to temporarily suspend BitLocker, click on suspend Protection, and then click Yes.

  o to turn off BitLocker and decrypt the player, clickTurn Off BitLocker, and then click reader to decipher.

  Check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows7/help-protect-your-files-using-BitLocker-Drive-encryption

• How to turn on the computer after you have reinstalled Windows 7?

  Original title: I erased my old computer and installed Windows 7 on a new machine how do I reacivate?

  I got Windows 7 on the old machine and I think I have to not turn off the machine.  I wiped Dees old machine and so I can't use it to disable this feature.

  There is no disable processes

  I sssume this is a detail of victory and not the provided version preinstalled by PC manufacturer. (Which cannot be transferred to a new PC)

  Simply install on the new PC, use your key and activate, if necessary use a phone activation, do not meet all the guests until given the opportunity to speak to a real person.

• After you have reinstalled Windows XP my computer said that having no audio device. How to re-install a new audio device?

  After you have reinstalled Windows XP my computer said that having no audio device.  How to re-install a new audio device?

  A. Si you have the sound driver file install it normally

  or
  B. extract the files to a specified location
  go to Device Manager
  find the audio device with the yellow mark
  Right click and uninstall or update driver
  Select Advanced Setup
  the location of the file
  and follow the instructions

• After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers are gone

  After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers went (poster generic non-pnp monitor Device Manager). I have viewsonic va1916w monitor, and I can't find the drivers on the official website of viewsonic. Where can I find it?  Thank you

  Drivers for Vista & Winxp, the two bit versions are available on the website of decision makers

  http://www.ViewSonic.com/products/archive/va1916w.htm

  The issue may have been caused by updateing your system drivers from somewhere other than your PC manufacturers or the motherboard manufacturers site, in the case of a generic desktop computer

• After you have reinstalled windows xp, I lost my audio devices of the system

  I plugged in a new usb mouse and hub 4way in my computor screen went blue, wgen she is back on I had no control of the mouse. I plugged the old mouse, the screen was frozen. Ishut down and rebooted but nothing works. I reinstalled windows xp butnow I have not any showwing audio device connected. the motherboard is foxcom

  You has not LOST the device if you have installed new XP Windows.  You simply do not have the device for device drivers, Windows XP can actually communicate with the device.

  You will need to download and install all THE drivers for hardware devices.  Motherboard chipset, audio, video, networks, printers, scanners, cameras and so forth.

  "Foxcom" tells us nothing and is only part of the story.  In order to get the drivers, you will need to know each device you have (or at least the make and model of the motherboard or computer as a whole.)

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• After you have reinstalled windows xp, I can't get windows service Pack 3 update, I get the error code Ox802490036

  After Reinstalling windows xp, I can't get the updates, I get Ox802490036 error it would prevent even me to help live Center of microsoft update... .Please can someone help me

  Hello

  Method 1: Download and install the Windows XP SP3 manually and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Method 2: Perform operations from the links below and see if it helps.

  Steps to take before you install Windows XP Service Pack 3

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/

  Hope this information helps.

• After you have reinstalled Windows XP, I am unable to connect to the internet. Tried to fix the computer with Norton but then decided to re - install.

  I had to reinstall windows xp on my computer.  After that I finally got on it now says it can't find an internet connection.  I have a House on a wired network with a router and modem centeral.  cables and connections are all good, and I was online with Norton tries to fix problems with the computer front of reinstaling windows xp.

  Steve,

  I think that you better install the drivers. I found your other post. Visit the computer manufacturer.
  Cheers! ~

• After you have reinstalled Windows XP, the video settings are not correct

  Original title: parameters viedo

  I had to reformat and reinstall XP.  Everything works except for things like graphics, cards and other games and some pictures.  They are very wide and short.   I guess it's something in the video settings defined in landscape mode, but I can't find where.   Can anyone help.

  Thank you

  Caz

  You probably just set your screen resolution to match your monitor.
  Right-click on an empty area of your desktop and select 'Properties', then click on the 'Settings' tab at the top.
  At the bottom left there is a box of "Screen Resolution."  Drag the marker to change the screen resolution to a setting that matches your monitor...  You determine this by the ratio of the width to the height.  Some common resolutions to the dimensions of the screen are the following:

  4:3 = 800 x 600, 1024 x 768, 1280 x 960, 1600 x 1200
  5:4 = 1200 x 1024
  8:5 = 1440 x 900, 1680 x 1050
  16:9 = 1280 x 720, 1776 x 1000, 1920 x 1080 (widescreen)

  After you change this setting and click on 'OK', the screen will become to this resolution.  It will give you a few seconds to confirm that the monitor can display this resolution. If you see the screen, click on 'OK '.  If your screen is empty, don't panic but just wait 30 seconds approximately and your screen will return.

  HTH,
  JW

• After you have reinstalled windows how do I XP to recognize my programs on the hard drive

  After the computer told me that the rundll was missing I reinstalled XP home got all this

  dates, years SP now do I have to re - install my programs such as Word and Excel, or y at - it a way to get XP to search?

  There is, but it is not reinstall your old software.  The installation involves many parameters in the registry, copy of the files in folders systems, updating the start menu, etc etc.  I wish there was such a command, but I'm afraid that there is not.  I'm sorry.

  Good luck.

• How to get the drivers and files lost after you have reinstalled Windows XP

  Message: How to recover documents Word and Audio drivers after reinstalling Windows XP on the computer.

  Operating system: Windows XP

  Exactly how is that did you reinstall Windows.

  Your "reinstall Windows" had formatting of the disk (i.e., a "clean install") or restore the computer to its state of "cost-of-the-factory '?  If so, your documents and other files are essentially disappeared (possibly recoverable at great expense by using a Drive Savers).

  If you don't reformat or use a "recovery partition" (that is, you did a "repair" install), then it is possible that your data may be recoverable.  More you continue to use the computer, however, over the likelihood that the data is unrecoverable.