After you have reinstalled windows how do I XP to recognize my programs on the hard drive

Similar Questions

• After you have reinstalled Windows XP my computer said that having no audio device. How to re-install a new audio device?

  After you have reinstalled Windows XP my computer said that having no audio device.  How to re-install a new audio device?

  A. Si you have the sound driver file install it normally

  or
  B. extract the files to a specified location
  go to Device Manager
  find the audio device with the yellow mark
  Right click and uninstall or update driver
  Select Advanced Setup
  the location of the file
  and follow the instructions

• After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers are gone

  After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers went (poster generic non-pnp monitor Device Manager). I have viewsonic va1916w monitor, and I can't find the drivers on the official website of viewsonic. Where can I find it?  Thank you

  Drivers for Vista & Winxp, the two bit versions are available on the website of decision makers

  http://www.ViewSonic.com/products/archive/va1916w.htm

  The issue may have been caused by updateing your system drivers from somewhere other than your PC manufacturers or the motherboard manufacturers site, in the case of a generic desktop computer

• After you have reinstalled Windows XP, I can not install any service packs.

  Could not load service packs windows xp

  I reloaded windows xp pro, and now I can't get service packs to load. With packages of sp, I can't get the flash drives, and so on. Any ideas out there?

  Hello

  Service Pack2 (if you need it) can be obtained here.

  http://www.Microsoft.com/download/en/details.aspx?ID=28

  Service Pack3 can be obtained here.

  http://www.Microsoft.com/download/en/details.aspx?ID=24

  Have you tried windows update? If Yes, see this...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f

  If the foregoing is not useful so can I suggest that you be a little more specific on what is blocking you? Tell us what you do to try to get the service Pack installed, and what happens when you do that, including error messages verbatim etc.

  Tricky

• After you have reinstalled Windows XP SP3, it does not accept my product key.

  I am running Windows XP Professional w / SP3 and I needed just gut out and start over. I formatted the hard drive with a disk of Windows XP Pro SP3 from the local computer repair shop. They said I could use the drive until I changed the product key. Windows installed perfectly, but I can not change the product key to what the former was! Help! Please, I beg you!

  original title: format and reinstall the questions!

  Hello

  1. what exactly happens when you use the product key?

  2. you receive messages or error codes when you use the product key?

  You can try to perform a phone activation using the product key and check if it helps.

  How to change the product at the time of activation key

• Product key does not work after you have reinstalled WINDOWS 7 HP x 86. (WIN 7 UPGRADE SOFTWARE, BEST BUY)

  I have win 7 Home premium x 86 update software and just did a full format of the hard drive, first install xp, then updated with disc for win 7, why don't my activation key doesn't work and how to operate?

  Your key has already been activated once it is why you have the activation number. Easy fix, just activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Can't install Google Earth after you have reinstalled Windows 7

  Original title:

  Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

  I run window 7 to reason the hard drive of the sum has been out of space and we Cap off load fresh window 7 and since then, I installed the programs but I came to install google earth I have run into a brick wall it loaded the Earth icon but but when I clicked it, he popped the screen in the largest set of icons and give a message to say my grafics card did not support google earth can anyone help Matt peace

  Hi Matt,

  I suggest you to refer to the links and check if it helps.

  Minimum system requirements to run Google Earth

  The graphic problems and crashing on Windows machines

  Install Google Earth on Windows 7

  If the problem persists, please post your query in Google Earth forums for assistance on this issue.

• How to get the drivers and files lost after you have reinstalled Windows XP

  Message: How to recover documents Word and Audio drivers after reinstalling Windows XP on the computer.

  Operating system: Windows XP

  Exactly how is that did you reinstall Windows.

  Your "reinstall Windows" had formatting of the disk (i.e., a "clean install") or restore the computer to its state of "cost-of-the-factory '?  If so, your documents and other files are essentially disappeared (possibly recoverable at great expense by using a Drive Savers).

  If you don't reformat or use a "recovery partition" (that is, you did a "repair" install), then it is possible that your data may be recoverable.  More you continue to use the computer, however, over the likelihood that the data is unrecoverable.

• How can I recover my old email after you have reinstalled Windows 7?

  Under the direction of the MS Support, in order to solve a problem, I had to reinstall Windows 7. After installation, all my old email was absent. Support MS staff member told me that he was not trained to retrieve my email and sent me a link to try it on my own. I failed miserably. I managed to get a few email (Comcast) but only from the date of the re - install and none of my old stuff. In fact I managed to do it in triplicate. As you can see I'm not a computer person. Can someone help me? I need step by step instructions.

  Thank you

  Bill

  Please see the next post to see if can help recover your e-mail:

  How to recover Documents, music, and e-mail after the upgrade

• How can I disable the basic after you have reinstalled Windows 7 Home Edition with BitLocker Drive encryption?

  Original title: Bit Locker Drive Encryption problem

  . I bought my laptop with windows 7 home basic operating system. After 1 year my Software Engineer friend makes me Express Windows Ultimate.Then upgrade after a few viral problems, I recovered my system, then I went home base only. But when I was working with Ultimate, I used Bitlocker Drive Encryption.But when I got to the Home Basic edition, I couldn't stop this disc encryption. So please help me to stop temperature Drive Encryption.

  Hello

  Follow the described steps mentioned to turn off BitLocker.

  1. open the Bitlocker Drive encryption by clicking the button of theStart, clickingControl Panel, clicking Security, and then click Bitlocker Drive encryption.

  2. do one of the following:

  o to temporarily suspend BitLocker, click on suspend Protection, and then click Yes.

  o to turn off BitLocker and decrypt the player, clickTurn Off BitLocker, and then click reader to decipher.

  Check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows7/help-protect-your-files-using-BitLocker-Drive-encryption

• Problem product key after you have reinstalled Windows XP.

  Original title: Re-install windows XP

  My computer has a virus and so I had to format and reinstall windows XP.  I'm at the point where I have to enter the product key, but it won't accept it. I tried to change the B of 8 etc, but nothing helped. Can you help me?

  Hello

  1. are you using a CD provided by the manufacturer of the computer, or you use a retail XP CD?
  2 is the key that you are using a sticker on the computer or the one included with a purchase XP?
  3. What is the exact error you get when you enter the product key?

  If you use the key of a sticker on the computer, you need to be sure to use an OEM provided the CD to reinstall.
  The key to the sticker on a computer that says "OEM" will not be able to activate on a Setup from a retail CD.

  Follow the steps in the article.

  You receive an error message after you enter the product key when you try to install Windows XP http://support.Microsoft.com/kb/310637

  For reference:
  How and when to contact Microsoft and support Customer Service
  http://support.Microsoft.com/kb/295539

• I have no sound on the computer after you have reinstalled Windows.

  Hello

  I just reinstalled Windows 7 on my PC and I was a little proud of myself, have internet, email, video works... but then no sound. :(

  So the most common answer seems to be getting the correct driver.

  I have a motherboard ASUS P7-P55-M, I went to the ASUS website and got the best audio driver for this mobo, which is: VIA_Audio_V6019500_XPVistaWin7.

  I therefore installed that, and then one encouraging thing is that DURING the installation of this audio driver, my speakers made a sound that made me think that they are the least recognized, or this audio driver is at least to see them there?

  But then after the reboot, I still have no sound.

  So I tried to look at the specs for this mobo, and saw the audio chip itself is VIA VT1708S. So I followed the links and found a driver for it, but after I installed that now, it seems that it is just a version still newer same driver (the preceding being 9500, 10200 or this is what it looks like.)

  in any case, this newer version and the one outside the site of ASUS, as well as older drivers, I think, just install a version or one that other: HD VDeck.

  Common responses include at this time something about the Realtek drivers (can't see how tho so it shall not apply, or using those on drivers THROUGH), or Windows Troubleshooter, or something in the playback functions, or an old or Windows driver conflict with these new?), but I have tried these things (or I thought I did lol).

  But I still have no sound on my speakers.

  Very frustrating because it feels like I'm 98% done my re - install, and it looks like its just some simple setting somewhere in Windows or this HD VDeck that will get things working.

  Any help would be greatly appreciated! :)

  Original title: speakers work not after fresh windows 7 installed, please help!

  Hello

  Thank you very much for your answers. :)

  I formatted completely, no folder Windows.old and also no printed dxdiag, I myself for the kicks, which I'll make sure to have next time lol.

  Device Manager is fine, I went over that and basically each sound option of Windows or menu, that I could find, which made me think the problem somewhere else.

  So I took the suggestion of Nirmal and used automatically diagnose it and fix the link he provided. Suggestions of the convenience store has really helped as much as he said everything has been updated, or was not a problem, but what I noticed, it was what a screen in the Microsoft Fixit program running:

  Resolution of Windows Audio playback problems

  Which of these devices you want to troubleshoot?

  Select the device that you are having problems with. If the device is not listed, select device are not.

  Speakers - VIA High Definition Audio (the connector for this device is located on the front of the computer).

  Interface SPDIF (TX0) VIA High Definition Audio (the connector for this device is located on the open or pull-open sliding panel at the back of the computer).

  Output HDMI AMD - AMD high definition Audio Device (Connector for this unit is located in the HDMI connector).

  Unlisted device.

  Now when I continued from here, I don't have all the answers useful, but it makes me start thinking about the plugs/connectors themselves, rather than the drivers or anything else.

  So, I've discovered that my audio interface (HD VDeck) installed with the audio drivers of my motherboard, has no options is disable the jacks on the front panel, or the possibility of re - configure jacks how you want. If you want your speaker system to get out the same plug as it was before, you MUST be able to reconfigure your catch. Otherwise, making default value for your speakers, according to the drivers from the manufacturer of your, is actually not the green plug, I used, but among the other instead. This other outlets, or maybe even just the front headphone or microphone jack will work instead.

  So to summarize:

  If you did a clean install of Windows 7 (or a similar version), and that you have installed the drivers of your sound and re-configured your settings Windows Sound (speakers as value by default, etc.), then you did everything up to this point correctly. At this point, you MUST have an audio program like Realtek, which allows you to reconfigure or disable the catch. Otherwise, your speakers, by default, is no longer just the audio jack green we are accustomed to, but rather another "back". You MUST use the other rear socket (most likely the speaker FRONT plug), or one of your jacks façade, in plugging your speakers instead.

  This may sound funny, but this workaround works, unless you get an audio program to reassign the normal green audio jack.

  I looked at hundreds of messages on the last few days trying to get this resolved. I wish I could go back and share this info with all these people now lol.

  Thanks for the info, and please share with all those who have problems with Windows reinstall and sound.

  Kind regards

  Brad

• After you have reinstalled Windows 7 Ultimate error isn't real OS?

  I had to completely erase my laptop HD and reinstall WIndows 7 Ultimate from my OEM copy. But he said that it is not authentic. What is even more strange is that he made two months after I installed it, which is zero logic. And it is certainly an authentic copy, I still have the receipt from the store that I bought it to prove! So someone please tell me how we can solve this problem.

  exactly told the rep of activation you?

  I begin to suspect that you had previously installed on another computer. Note that an OEM license is valid only on the first computer, it has been installed on and cannot be transferred to another computer.
  An OEM license can be installed on the same card mother as many times as you want but are not valid on another computer.

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Help, please

  I have a Pavilion dv6 laptop Notebook with Windows 7 64 bit Home Premium edition. After formatting the computer's hard drive, I reinstalled Windows 7 64 bit Home Premium edition.

  Now it cannot connect to the internet through wireless. I tried all the basics: by pressing the button to turn on the WIFI on my keyboard, restarted my computer, which allows to disable the internet connection in the network area, etc..

  In Device Manager I see 2 devices linked to the internet wireless:

  1. other devices > Network Controller - it has a yellow warning sign then him - the error is to have no driver installed.

  2 network adapters > Realtek PCIe FE Family Controller - "this device works properly."

  Here is the hardware ID's for the network controller is not working: PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  What should I do? How can I get my Wi - Fi to work again?

  Thank you...

  Hello:

  Here is the link for the driver you need for your Realtek RTL8188CE 802.11b/g/n WiFi Adapter.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-100014-1&mode=5

  Paul

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Any help please?

  I have a HP Pavilion g7 - 1205ev laptop with Windows 7 64 bit Home Premium edition.

  I bought a new hard drive, so I had to reinstall Windows.

  After installation, the laptop cannot connect to internet by wifi or Ethernet. After trying the troubleshooting it says that windows do not detect a network card installed properly.

  In the Device Manager, I see that there is an exclamation to these exact components:

  Standard VGA graphics card

  BCM20702AO

  Ethernet controller

  Network controller

  PCI device

  PCI Simple Communications controller

  SM Bus controller

  Download all these somewhere? And of course I'll upload them to another PC that my laptop will not at all online.

  I also tried to run Ubuntu from a flash drive on my laptop and the Ubuntu uses the Internet very well. (If this information is useful at all)

  Can someone tell me what to do? I'd appreciate any help. Thank you.

  Hello:

  Here are links to the drivers you need...

  First, install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94402-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Then, install the graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-99756-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100017-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Network controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-95652-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  BCM20702AO:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101140-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94325-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Dev PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=