Impossible to access the router set up page, tried all night.

Similar Questions

• Windows 10 devices cannot access the router settings (R6250) page

  So, after several hours of troubleshooting (reset the router, firmware flashing, try several devices) I think I discovered why I get the message '192.168.1.1 refused to connect': 10 Windows. All devices not - 10 Windows can connect to Settings page fine, but all of my Windows 10 devices fail and get this message. And on my laptop, it gets the message refused on Windows 10, but when I rebooted the router and tried a linux live usb on the laptop, it connected to the page of the parameters very well. So I think it's some kind of problem between Windows 10 and the router.

  Anyone has any advice on how to fix this? I need the settings page to run on Windows 10 as it is the main operating system I use.

  Thank you!

  Have you tried different browsers?

  Try turning off the Windows Firewall, temporarily.

• Access the router cant admin homepage

  I can't access my router admin page.

  I tried this: 192.168.0.1 192.168.1.1 www.routerlogin.net www.routerlogin.com, I used google, internet Explorer...

  model of router: wndr4500

  Can you help me?

  Kind regards

  Xander

  Assign you a static IP address on the computer?

  If you have set it to static, back to obtain an IP address automatically.

  The two IP addresses must be in the same range.

  It is recommended that you access the router admin page using a computer that is connected directly to the router.

• to access the variables in a page in another page qml

  Hey gang,

  I've been watching some of the other problems autour to access the variables from one page on another page qml qml, and I can't get this to work.

  I have a page, main.qml with a NavigationPane.  The NavPane has a Page and some containers.

  I have a property defined in the NavigationPane like this:

  NavigationPane {
      id: mainNav
      backButtonsVisible: true
      property int customInt: 2
  
      onCustomInt: {
          console.log("  -------------> App: customInt");
      }
  

  I have a ComponentDefinition for next page, called SettingsPage.qml.  In the settings, I have two drop-down lists and a slider.

  Page {
      actionBarAutoHideBehavior: ActionBarAutoHideBehavior.HideOnScroll
      id: pgSettings
  
      ScrollView {
          id: pageScroller
          scrollViewProperties.initialScalingMethod: ScalingMethod.AspectFit
          Container {
              topPadding: 25
              bottomPadding: 25
              rightPadding: 25
              leftPadding: 25
              Label {
                  text: "Settings"
                  textStyle.fontSize: FontSize.XLarge
              }
          Container {
              id: dropDown1
              topPadding: 25
              bottomPadding: 25
              rightPadding: 25
              leftPadding: 25
              DropDown {
                     id: ddOption1
                     title: "Option 1"
                     verticalAlignment: VerticalAlignment.Center
                     horizontalAlignment: HorizontalAlignment.Center
                    Option {id: o1o1; text: "One"; }
                    Option {id: o1o2; text: "Two"; }
                    Option {id: o1o3; text: "Three"; selected: true; }
                    Option {id: o1o4; text: "Four"; }
  
                  onSelectedIndexChanged: {
  
                      switch (selectedIndex){
                          case 0:
                              //
                              console.log(" -->App: Option 1 Selector, On");
                              customInt = 0;
                              break;
                          case 1:
                              //
                              console.log(" -->App: Option 1 Selector, Off");
                              customInt = 1;;
                              break;
                          case 2:
                              //
                              console.log(" -->App: Option 1 Selector, Top (default)");
                              customInt = 2;
                              break;
                          case 3:
                              //
                              console.log(" -->App: Option 1 Selector, Bottom");
                              customInt = 3;
                              break;
                      }
                  }
              }
          } }
  

  I look forward to the the statement will change the level property NavPane, called customInt, but it doesn't.

  the output of the console shows that the ' App: Option 1 selector "gets selected in the dropdown list selected index changes, but the onCustomInt() funtion slot never gets called.

  I tried "mainNav.customInt = X" too, but the parameters cannot solve the mainNav.  I get "unknown symbol 'mainNav'" error with alittle bulb.

  what I am doing wrong?

  When you call the second page, SettingsPage.qml, set it as an object.

  Don't do the following:

  attachedObjects: [
  
      ComponentDefinition {
          id: settingsPageDefinition
          source: "SettingsPage.qml"
      }
  ]
  

  Follow these steps:

  attachedObjects: [
      // Definition of the second Page, used to dynamically create the Page above.
      ComponentDefinition {
          id: settingsPageDefinition
          Settingspage{
  
          }
      }
  ]
  

  Then the second page main navigation page in the IDE.  I had the same problem with a multi-page application, I created.

• TuneUp Utility has been installed on a trial basis, it changed the things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  On my old Dell with Windows XP I installed Tuneup Utility on an experimental basis, it changed things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  Anyone have a solution?

  Help, please.

  Software support to the YOU seem hopeless, they donot even read the request entirely to meet the last 8 weeks and many emails in series.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  Method 1:
  Try to uninstall the utility and check if it helps:
  http://support.Microsoft.com/kb/307895

  Method 2:
  Try to restore the computer to the point before you install the utility and check if it helps.
  http://support.Microsoft.com/kb/306084

  It will be useful.

• WRT1900AC: Cannot access the router remotely

  This can be a simple, but I'm scratching my head on it.

  I just took a 1900 for my personal use at home. I did a basic auto config (Nothing fancy, just Plain Jane).

  As part of the configuration process, I associated the router to a Smart Access account that is different from that assigned to the routers in my church.

  For some unknown reason, I can not access the router using the Smart app unless I am accessing Internet through the 1900. If I have Internet access through my Verizon FiOS router, the Smart application tells me that my wireless router is offline.

  I missed the 1900 and started from scratch using my office... again... combining the unit on the account. Once again, no luck.

  I have a session with my smartphone and tried again with my tablet. Still no luck.

  Just to make sure that there is no failure, I tried to access the routers of the Church... and has been able to do without any problem.

  Y at - it an option that I forget? I don't remember running into this situation when you configure the 6500 s and 6900 s.

  10,168 is also a private IP address.

  I recommend that you enter this address that you see on the WRT router in DMZ ISP modems. If there is a reservation on the ISP modem function, book it as well so it can't change it later. This will keep the DMZ address for the WRT router and you should be good here.

• XP sp3 impossible to access the Options Menu with the keyboard

  When you try to access the security mode of the Advanced Options Menu does not respond to the keyboard. Cannot use the arrow keys to select or even select normal startup. Completely locked. Must restart. Have installed the latest drivers for the millisecond (MS Intelli Type Pro and drivers dated 29/06/2010 ver. 8.0.2190). When accessing the BIOS function and XP and all apps also all keys.

  Keyboard purchased 26/01/2011. MS Wired Keyboard 600 model 1366.

  You wish to have access to safe mode back

  The system I have, I built from the bottom upwards, it's been about 5 times. Keyboard is USB, HARD drive is IDE.

  The reason I wanted was fashion safe to remove the access and the application that cannot be removed using my program uninstaller or add/remove Control Panel. This is a secure application that I used for the password protect and hide the request. I installed the new application and should have opened the former access to files, but not installed the first new. And now, the old file is protected course. But in Safe Mode saved the day. I used msconfig to start safe mode. Neverhad this happen in the past, the only change is the keyboard and Sp3.

  Hey once again thanks for your time, really appreciate it.

• How to access the firefox on laptop Office keeping all the features?

  How to access the firefox on laptop Office keeping all tabs and bookmarks?

  Hello

  You may be able to do this in Firefox Sync configuration on both devices. Please see for detailed instructions.

• Comment do pay change the VAT number, even after trying all possibilities to contact you? Car I have to renew my subscription it works like pay the time. If not can I make a new account and keep all my videos

  Comment do pay change the VAT number, even after trying all possibilities to contact you? Car I have to renew my subscription it works like pay the time. If not can I make a new account and keep all my videos are that they do is delete? Thank you!

  Hello Anthony, I just talk to an officer on the support of the cat, its ok for me!

  So to other consumers of the same question:

  Go to this page: https://helpx.adobe.com/contact.html?step=CCSN_membership-account-payment_change-or-upgrad e-tone-subscription

  Then click on the blue button "still need help? Contact us. "

  Then click on the option contact fist > 'Chat '.

  Wait a few seconds and then be cool, ask to change the VAT number and wait... the agent will make the change...

  You will receive an email within 2-3 days to confirm the change (to the used email registration)!

  That's all!

• When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas?

  When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas? I am running Vista and office 2007. I tried all the Windows solutions but nothing works

  Hello Stephen,

  You happen to have another system that you can try to download the fixit on and then moving on a USB? You can also try this fixit as well: http://support.microsoft.com/kb/971058

• Cannot install the router firmware-impossible to access the knowledge base to do.

  Hello

  complete newb here.

  I'm having some trouble with the abandonment WRT610N router whenever I put on new devices on the network and I go to the download of the firmware update - FW_WRT610N_1.00.03.15_20090514- but I don't know how to install it. It is a .bin file.

  I'm reading the F.A.Q.S. on how to install a firmware on the router, but I can't access the database of knowledge here and I can't create an account to access either.

  How to install firmware?

  I tried just looking for updates via Lela and he says no update.

  I can't finad any program to open the .bin file.

  Duane

  I managed to get the update of the firmware.

  The problem is I think that my router is pretty buggy and unfortunately I got a defective router for purchase.

  It kept stalling on me and go through the steps of power flashing randomly.

  I had replaced it where I bought it and the new router is not a problem at all.

  Thank you for all your help

• Impossible to access the VM DG280 router C4780

  My C4780 printer fails to connect wirelessly to the router NetGear DG280 Virgin Media from my Mac.  Status of the printer offline.  ER has BT Hub 2.0 and even Mac and printer worked fine.  Anyone has an idea why the printer and router don't talk to each other?  Thank you

  You will need to re - install the printer.  First of all, to the front of the printer: [Scan] Setup > network > network by default.

  Now, download the latest version of the software for your printer from the "Support & drivers" link at the top of this page and re-run Setup.  You will need to temporarily use a USB cable to your computer to talk to the printer of your new router (network).

• Impossible to access the account, the message says: "you cannot access your account because your parent has blocked it.»

  Changed the title: I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  Hello Nimaakhaven,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Impossible to access the gateway 192.168.1.1 username and password is incorrect

  When I want to access 192.168.1.1the user name and password that worked before now don't work anymore! Why?

  If someone forgets his password it should do? How can I reset my login and my password?

  I really have to change the configuration of my router. My router model is WAG120N

  Thank you

  You can try to connect to the router configuration page using i.e. password default "admin", if it does not, then you can use "admin" as the user name and password and then check... If this still does not work then you need to reset your router.

  To reset your router press and hold the reset button on the back of your router for 30 sec then unplug the power supply and reconnect it back... But it will restore your default router.

• "Bad Gateway" EA4500 try to access the router after installation the software upgrade

  Hello, I have recently updated my installation software to Version 2.0.14212.1.  I realized that I had to upgrade the installation software before upgrading the Firmware to version 2.1.41 (Build 164606).  However, since the upgrade of the installation software, I could not connect to the router on any browser (Firefox and Chrome).  Instead, I get the error message "-502 Bad Gateway.

  To add to what chadster766 suggested, after pressing the reset button for 30 seconds, try to turn off the router to give him time to rest. After a while, it turns on and plug a PC for it. Try to access the configuration again to 192.168.1.1 page.

  Hope that helps.