Impossible to access the VM DG280 router C4780

Similar Questions

• TuneUp Utility has been installed on a trial basis, it changed the things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  On my old Dell with Windows XP I installed Tuneup Utility on an experimental basis, it changed things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  Anyone have a solution?

  Help, please.

  Software support to the YOU seem hopeless, they donot even read the request entirely to meet the last 8 weeks and many emails in series.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  Method 1:
  Try to uninstall the utility and check if it helps:
  http://support.Microsoft.com/kb/307895

  Method 2:
  Try to restore the computer to the point before you install the utility and check if it helps.
  http://support.Microsoft.com/kb/306084

  It will be useful.

• Cannot install the router firmware-impossible to access the knowledge base to do.

  Hello

  complete newb here.

  I'm having some trouble with the abandonment WRT610N router whenever I put on new devices on the network and I go to the download of the firmware update - FW_WRT610N_1.00.03.15_20090514- but I don't know how to install it. It is a .bin file.

  I'm reading the F.A.Q.S. on how to install a firmware on the router, but I can't access the database of knowledge here and I can't create an account to access either.

  How to install firmware?

  I tried just looking for updates via Lela and he says no update.

  I can't finad any program to open the .bin file.

  Duane

  I managed to get the update of the firmware.

  The problem is I think that my router is pretty buggy and unfortunately I got a defective router for purchase.

  It kept stalling on me and go through the steps of power flashing randomly.

  I had replaced it where I bought it and the new router is not a problem at all.

  Thank you for all your help

• Cannot access the internet (table routing and connection seems to be very well)

  Hello

  I have a problem that I can't know at the present time.
  The problem started after uninstalling cisco anyconnect vpn.
  Description:
  cannot access Web sites or even the router configuration panel
  cannot tracert beyond the first jump (router)
  can ping to ip Internet addresses
  routing table appears to be well
  After disabling all services additional error is always persistent
  computer is connected to the router cable
  So, it seems that something is blocking the connection, but I can't understand what...

  It fixed to the help of netsh winsock reset catalog and restart...

• Impossible to access the account, the message says: "you cannot access your account because your parent has blocked it.»

  Changed the title: I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  Hello Nimaakhaven,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• ReadyNAS Duo v2 impossible to access the start menu

  Hello

  I am new in ReadyNAS, I bought this one for a long time but only used for a few days... I try to use again, I tried to upgrade the firwmare the/admin /, but surely a bug appear, because after restart-auto, I can not access the /admin/ with my own password or the default password factory.

  So, I am trying to go to the Start Menu to use that reinstalling the operating system. I & pressed the reset button, press the power button and wait... wait... wait... the 5 LEDs light up but that never happen :-(

  I have only 2 LEDs for disks (2 at the same time), and then a few seconds later, only the right one.

  Maybe I can try with a Boot USB Recovery but I can't find where to download (the search engine return nothing on the download page)

  Thanks for your help!

  Hi lakano,.

  Welcome to the community!

  Can you confirm the version of your ReadyNAS unit HW? It could have been labeled as ReadyNAS V2, but it could be a V1. Send me a PM with S/N so I can check.

  Kind regards

  BrianL
  NETGEAR community team

• Impossible to access the system restore, getting the error "system restore has been disabled by group policy.

  Recently, I was hit by a virus that, among other problems, he blocked my access to the system restore to clear it. After having had my pc repaired I can not even access the system restore or my registry. I get a message from that system restore has been disabled by group policy. It's my own pc and I am the administrator. I've tried a few things without success. I hope someone can help me with this. I have the vista operating system.

  1. click on start, run and type regedit.exe , and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  • Delete the value DisableConfig
  • Delete the value DisableSR

  3. exit the registry editor.

  Other tips, tricks and support are available at: www.waltwachon.weebly.com

• Impossible to access the advanced boot menu

  Original title : Safe mode for access to the

  When I start my laptop it goes right into the Boot Device menu. How to do in safe mode? By pressing F8 does nothing. I use windows XP

  Hello barber147,

  What is happening on the machine is that you have to start safe mode?

  Sometimes we don't see the prompt for F8 to access the start menu.

  Often find it me easier to continually press F8 during the boot process

  Let us know.

  Best regards

  Matthew_Ha

• XP has changed the user accounts is now impossible to access the administrator account

  Something has gone wrong when changing my user accounts. I don't have an administrator account can create a. I can't even restore my system. It doesn't let me do anything! What to do Help!

  You use the built-in account named "Administrator"?  If so, the behavior you describe is "a feature, not a bug."

  Windows XP hidden administrator account when a user account is created (because it's a good idea not to use administrator systematically; it should be saved for emergencies).

  You access the administrator account integrated differently depending on whether you have XP Home or XP Pro.

  For XP Home:

  You must restart in Mode without failure.  Restart the computer and start typing the F8 key as soon as the initial startup process is finished.  If you see the Windows logo, you waited too long and you have to restart again.   If you do it right, you will see the white Advance Boot Options menu on black (image).  Use the up/down arrows and the Enter key to select Mode safe because your mouse does not work on this screen.  Once the computer starts in Mode safe mode, the administrator account will appear on the Welcome screen.  If you have not changed the password, the password is blank (no password).

  For XP Pro:

  Follow the signs for XP Home Edition, or in the Welcome screen, with no logged-in user, press CTRL + ALT + DELETE twice.  The 'classic' logon box will appear.  Type "Administrator" (without the quotes).  Once again, the default password is empty.

  Once you enter the administrator account, create an account with "computer administrator" privileges for occasions when you need (for example, to run the system restore or create accounts).  You can use any name you want (other than Administrator), such as MyAdmin.

• XP sp3 impossible to access the Options Menu with the keyboard

  When you try to access the security mode of the Advanced Options Menu does not respond to the keyboard. Cannot use the arrow keys to select or even select normal startup. Completely locked. Must restart. Have installed the latest drivers for the millisecond (MS Intelli Type Pro and drivers dated 29/06/2010 ver. 8.0.2190). When accessing the BIOS function and XP and all apps also all keys.

  Keyboard purchased 26/01/2011. MS Wired Keyboard 600 model 1366.

  You wish to have access to safe mode back

  The system I have, I built from the bottom upwards, it's been about 5 times. Keyboard is USB, HARD drive is IDE.

  The reason I wanted was fashion safe to remove the access and the application that cannot be removed using my program uninstaller or add/remove Control Panel. This is a secure application that I used for the password protect and hide the request. I installed the new application and should have opened the former access to files, but not installed the first new. And now, the old file is protected course. But in Safe Mode saved the day. I used msconfig to start safe mode. Neverhad this happen in the past, the only change is the keyboard and Sp3.

  Hey once again thanks for your time, really appreciate it.

• OffficeJet 6500 a. Impossible to access the Control Panel on Windows8

  I have a new laptop and you downloaded the complete HP software features. The test printing and scanning seem to work correctly. However I can't find how to access the Control Panel on my desk. He has not created an icon in my windows8 start pages.

  I have a button that says HP Printer Control allowsme to buy ink and my printer is offline. There is no scan options.

  How to access the control of printing/scanning panel full or, better yet, bind it to the control of the printer button.

  Thank you

  Hi SaraLK,

  I can help you find the digitization program. In the start screen or screen of tile, without clicking anything that this, start typing the HP. You should see the Officejet 6500 a, or even click on files and it should appear. When you click the Officejet 6500 has the help of the printer opens, you can also click with the right button on the icon and PIN to the taskbar so that it is always available right form the office.

  Here is another way, you can create shortcuts taskbar Windows 8 for your favorite programs. Please take no offense to the referenced site, it helps to make everything easier!  I use it all the time.

  I hope this helps.

• Impossible to access the records after you have reinstalled windows 7

  I recently upgraded my pc with a new cpu, mobo and ssd.  I have re-installed windows 7 on the new ssd (earlier it was installed on my hard drive). My hard drive with windows is still a primary with windows installed on it, partition even if I am unable to boot with it.  I didn't fit I want to backup my data once I have windows running on my new ssd.
  The problem that I face is now that I'm unable to access some files on my secondary drive. I tried to change the permissions for these folders using my admin account, but when I apply the new permissions, I get access denied error.
  The problem is limited to only a few files and I am able to access the others.
  Please help me with this

  The problem is limited to only a few files and I am able to access the others.

  You may need to take possession of the records problem - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Impossible to access the contents of a window (PopUp)

  Hello
  
  I'm trying to access the contents of a MovieClip I placed inside a PopUpWindow component, but cannot figure out how to do this. I've created the window with something like this:
  var SAedit_win:MovieClip = mx.managers.PopUpManager.createPopUp (_root, window, true, {closeButton:true, title: "Arterias Sistemicas", contentPath: "contentSA"});
  
  With this code, the window IS correctly created and the "contentSA" MovieClip (which is in the library) is properly indicated. However, I wanted to access the objects inside the "contentSA', but I can't find a way to do it. I have already tried:
  -SAedit_win.content (which is read-only...)
  -SAedit_win.contentsPath (which of course did not)
  -SAedit_win.target
  -SAedit_win.contentSA
  
  Can someone help me with that please?
  
  
  Tanks in advance
  
  JLonardoni

  Well, I give up. I looked everywhere on the net and found out that I'm not the only one. It is a not uncommon problem, but I think he has no answer, because all the forum posts I found unanswered.

  So, I have developed my own window with everything I wanted... It is not very OO, but it does the job.

• Impossible to access the router set up page, tried all night.

  I tried to access http://192.168.1.1/ all night and have had no success, someone has any ideas.

  I just tried what you suggested, and I am able to get now thank you.

• How to access the remote wifi router

  Hello

  I have a camera app on my phone where I can log in and check my home monitoring cameras. However, sometimes my homenetwork resets the ip address and if I'm not at home to check my new ip address, I don't know what is the new ip address to use and connect to check my cameras in the phone application.

  Sometimes, I travel and I try to check the cameras and connection failed because the IP at home has changed.

  I found this article, but I'm still waiting for e-mail by netgera! :

  http://KB.NETGEAR.com/app/answers/detail/A_ID/26109/~/how-to-remotely-access-your-router-using-netge...

  In addition, in the article, step 3:

  • Click the router settings , and then select remote access to connect as.

  HE IS No. TEL THING AS ACCESS to connect remotely.

  Is there another way?

  Help, please

  P.S. I have a router WNDR4300-N750.

  In the meantime what happens if Netgear is more professionally and send me the * beep * e mail for verification?