Impossible to activate the Windows 7 firewall

Similar Questions

• Impossible to activate the Windows Vista firewall

  Firewall
  I can't get my firewall to activate all the süden

  Hi mary_turley,

  1. don't you get an error when you try to turn it on?
  2. hell on Windows Firewall?
  3. which edition of Windows Vista you are using?

  Check the status of the Windows Firewall service.

  Follow these steps:
  a. click on start and type services.msc in the search box and press on enter.
  b. Locate the Windows Firewall service.
  c. make sure that the service is started and set to automatic.

  If you get an error during the startup of the service, then post the error here so that we can move forward more troubleshooting.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to activate the Windows Vista firewall, it does not appear in the Services

  Windows xp

  I can't turn on the firewall... I followed the instructions on http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/firewall-security-cant-turn-on-windows-firewall/a52f0907-2174-4ed1-9e56-c196e53e599a?page=1&tab=MoreHelp#tabs.  did not help.  I didn't see firewall listed in services to the cmd prompt, after pasting the head, I got "the specified service does not exist as an installed service.  now what?  I had installed avg, which seems to be the original problem... It is now uninstalled, tried ms mrfixit.  which doesn't work anymore.  Thank you

  I found the answer after continuing to search.  Critical words seems not to be a listed service.  Here is the link, I ran this first solution and it worked.

  ttp://support.Microsoft.com/kb/920074

  the antivirus avg, version free looks like it's made to be unistallable based on what I've seen elsewhere.

• Impossible to activate the Windows Firewall - error code 0 x 80070422

  Hello

  This is the first time I see that the windows firewall is disabled and when I try to turn the action center it shows like below. then when I click on manual settings it shows as the second screen.

  I tried to install the updates from HP, but it shows again a red alert in the Security State, see below.

  Currently, using Quick heal Total security and it is valid for 3 years.

  4 HP ENVY laptop - operating system: Windows 7 Home Basic 64 - bit Service Pack 1

  Please advice how to solve this problem, thank you.

  

  

  

  Hello

  As you have difficulties to turn the firewall please find the steps below to resolve this issue.

  Perform the following steps and install automatic updates and then try to turn on the firewall.

  Run an online scan to check any virus or any other malicious software:
  http://OneCare.live.com/site/en-us/default.htm

  Run as Administrator Security Center;
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-security-and-safe-computing

  Perform the following steps and update the computer:

  1. click on start, type Notepad in the start search box, and then click Notepad in the list programs.

  2 copy the following text, and then paste the text into Notepad:

  start wuauserv sc config = auto

  SC config bits start = auto

  SC config start = auto DcomLaunch

  net stop wuauserv

  net start wuauserv

  net stop bits

  net start bits

  net start DcomLaunch

  Click file, click Save as, and then type Repair.bat.

  3. in the file type box, click all files (*. *).

  4. in the save box, click Desktop, and then click Save.

  5. in the file menu, click on exit.

  6. right - click on the Repair.bat file that you saved in step 5, and then click Run as administrator. This action starts the required services. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  7. try again to install updates. If you install the updates, delete the file Repair.bat. To remove the file Repair.bat, right-click Repair.bat, click on remove and then click Yes.

  ·         Try to activate the firewall after these steps.

  Hope this information is helpful to you.

  Chetan 
  I work on behalf of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.

  Click on the STAR of CONGRATULATIONS on the left to say 'Thank you' to help!

• Impossible to activate the windows firewall get error code 0 x 609 & 0 x 80070424

  I can't turn on Windows 7 Firewall I get error Codes 0 x 609 & 0 x 80070424. It was working until I had the Trojan horse - BNKS.win.32.keylogger.gen. Removed with Malwarebites, but now it not light. Please help me solve this problem. Thank you very much

  John Kozubal

  Hi John Kozubal,.

  Follow the following troubleshooting methods:

  Method 1:

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2:

  I suggest you to perform system File Check to fix the corrupted system files, and then check how it works.

  Check out the following link to run the System File Check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Note: He may request DVDs windows of difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  Check the following link to learn more on the set or disable Windows defender and windows Firewall.

  Enable or disable the Windows Defender

  Enable or disable Windows Firewall in Windows 7

• Impossible to activate the window

  I bought a win 7 Professional and a win7 starter 2 years back and they worked fine, but now while activating the window I get and error message that the key is not valid. How to solve this?

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• is impossible to activate the windows media player. He was working. I downloaded imesh and uninstalled imesh because I didn't like it.

  I uninstalled Windows media player and reinstalled. Same result. I use real player as my default until the problem is resolved

  Can't uninstall WMP in XP, you can disable it via "Add/Remove Programs".

  components of Windows, so if you really uninstalled & reinstalled you might

  be in other problems. However, try to uninstall the Player module via Add/Remove of

  programs, reboot the pc after. Download WMP 11 here. http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=1d224714-e238-4E45-8668-5166114010ca

  After that, if the problems persist, go to run, type: MPLAYER2

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• Windows cannot start the windows Vista Firewall service

  My system is windows vista. When I tried to 'turn on the windows firewall' the message I got was ' Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the windows firewall service? "I clicked Yes and another message came:" Windows is unable to start the service windows firewall. " Then I went "firewall" on the Start button and click on "Windows Firewall with advanced security on local computer" and a message with the error code: 0x6D9 came. Can I get the solution to this problem of anyone in this forum. I will be grateful.

  Thank you

  Hello

  You are running a third part of the internet security solution? Many of them include a firewall that is clean and disable the Windows Firewall. If this is the case, you should first disable this one before the attempt to initialize the Windows Firewall. It is not advisable to attempt to run two firewalls at the same time.

  If you have recently deleted (uninstalled) a third party solution, you may need to run a cleanup this provider of software tool to remove any debris WASTE of this program in order to activate the Windows Firewall.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ