Impossible to activate WiFi through capacity switch/buttons

Similar Questions

• Impossible to activate WiFi on Toshiba NB100 - 11G

  Hello

  I try to activate wi - fi on nb100-11 g. I activate WiFi fn - F1, and the indicator down is light with an orange color.
  But it seems that wi - fi is not enabled, even if bluetooth is enabled.

  So I try to turn on wi - fi through Control Panel, but it shows no connection made.
  The only link that is there is the connection to the local network. Thus, wi - fi, is not activate.

  How can I activate it?

  Hello

  The FN + F1 key combination allows both the WiFi and Bluetooth.
  If BT has been activated then it would mean that you have chosen the BT instead of WLan connection and that's why the WiFi network is disabled.

  Press the FN + F1 again and check if you could choose Wlan and could allow it.

• Is there a shortcut or an alternative ot turn it on wireless when you lost the wifi because the switch button seems no longer works? my laptop is hp 8560w

  The switch for the wireless button is always orange and nothing happens when I press them.

  Its possible, you could go into the BIOS of the laptop and make sure that the wireless hardware is enabled (available on some models only). Consult this manual for possible help with that...

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c03424153/c03424153.PDF

  Beyond that by looking at the user manual it doesn't seem to be a combination of function for this laptop switch switch wireless only top of page material.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02970545/c02970545.PDF

  If you suspect a problem of material and the laptop is still under warranty I would contact HP for assistance...

  There are also forums for HP to possible assistance...

  http://h30434.www3.HP.com/T5/notebook-hardware/BD-p/hardware

• Impossible to activate touch id on this ios ipad 10

  Hello

  I have updated my Air 2 day before iPad and from my iPad slow, battery down faster and worst of all I get this warning on the screen, (impossible to activate touch id on ipad) try to reset and add the new fingerprint, but it does not at all. It's the product of 2 years and this bad with the new iOS n slow down in case of failure.

  Apple says it's best iOS, for me the worst until this iOS...

  any idea anyone?

  Hi Cacsh,

  I see that you post today because you are having a problem getting ID of contact set up on your iPad 2 Air. I also see that you encounter some problems related to the slow-running and your battery drains faster that you expect. I would like to help with these issues.

  To solve the problem you're having with Touch ID, I would recommend following the steps listed here:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not type too fast or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Go to settings > Touch ID & password and make sure the Unlock iPhone or iTunes and App Store is on and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

  Use the ID Touch on iPhone and iPad - Apple Support

  Regarding the slow performance issue you mentioned. have you noticed what is happening with any specific application? I would like to gain a better understanding of this issue before providing specific recommendations. To answer your concerns about the battery life, take a look at this document for more information on how to monitor your use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To get tips on maximizing the performance of your battery, take at look at this resource:

  Batteries - maximize Performance - Apple

  See you soon.

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Qosmio X 770-10 M - impossible to activate WLan using Fn + F8

  Hello

  I have a Qosmio X 770-10 M and I have a problem with the wireless.
  When I want to trigger on the system with the Fn key, told "the switch button is off, please turn it down."
  But there is no button on the Qosmio x 770...

  Maybe the switch is lightning one (near the volume control).
  But there is another problem here, I can not use this button. The volume control work, but the other does not.

  I tried to reinstall the package of added value, the wireless device, and some other stuff, but it does not at all.

  Can you help me?

  Thank you

  Hello

  There are lights in the front of the laptop.
  The second right is the WLAN led. This should light up red if the WiFi is enabled.
  Have you noticed this?

  The Wlan button is available in the key media row second from left near the ECO button. This button allows you to turn on the Wlan.

  Usually, these buttons are controlled by VAP (value added package) and you was on the right way to reinstall what I have no idea why it does not work in your case, it should

  How do you reinstall this PPV?
  I recommend to uninstall the package, reboot the laptop, clean the registry (via CCLenaer). Then reboot and then again by installing the latest version of the Toshiba driver page

• Activate WiFi on an Aspire AS33810T?

  How can I activate WiFi on an Aspire AS3810T? Is there a switch or function key that does this? Windows 7 says that there is a switch. I can't find.

  Note the fault of typing in the subject line: should be AS3810T. Response by myself to anyone interested. Windows 7 raised an error message after you complete Diagnostics on a WiFi adapter not functional, something to the effect "switch on the front or side panel or press function if available. It's a false message; There is no switch or function key. The ultimate solution was the following. Uninstall the adapter. Resinstall the adpater by performing a search for hardware changes. Reboot the laptop. Move the laptop near WAP to ensure high strength of signal. In this case that the WAP is not broadcasting the SSID so enter the SSID, security type and pass code. It works! Somewhere regarding this problem the WAP has restarted; which may or may not be important.

• Is impossible to activate windows xp! Activation window empty.

  Is impossible to activate windows xp! then, because I don't want to use windows 7, please help!

  I activated the front windows, a long time ago, but now it says I do not have, so I can't just acitivate, right? but here's the problem:

  When I click on "Activate windows" in system tools, it comes through the window, but in the window, there is nothing in it, no words or pictures, just a blue background, what can I do! ??? He must have three choice for me, we're activate online, one is by phone, we're not to activate now. but my situation is nothing! Nothing in the window, except two small picture to the left and right to the top of corner, the small image has a square, circle and triangle on a large white rectangle.

  Please HELP ! I have 2 more days to activate!

  Hi KhaBL,

  You cannot use a CD to install on another computer. I suggest that you contact the manufacturer of the laptop if you do not have the installation CD computer laptop with you.

  You can also contact Microsoft telephone support.

  Help and Support - Windows XP

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• Impossible to activate the backup on my iPhone

  I spent 3 hours with Apple staff, and I have not made any progress.  I am trying to back up an iPhone 5 to iCloud.  Under settings > iCloud > Backup, it indicates "Off".  iCloud backup/switch button is grayed out and cannot be turned on.  If I connect the phone to my office and try backup via iTunes, he tells be that the administrator has disabled iCloud backup on the device.

  At the instruction of Apple that I updated the software to 10.0.2 on the phone, I updated iTunes to the latest version.  I signed outgoing/incoming my iCloud account, find my phone, etc. twice already and I backup the phone on my desk twice and I've synced the phone twice.

  Any ideas how to switch backup to the phone or what it prevents active?

  Note all actions already tried.

  Thank you!

  parks34 wrote:

  If I connect the phone to my office and try backup via iTunes, he tells be that the administrator has disabled iCloud backup on the device.

  I don't know if I still have ideas, but I'm curious about this statement.

  1. You are the first owner of this phone?
  2. It's a phone of the company?
  3. Apple has any idea on this at all?

• NB100 - how to activate WiFi without Blutooth?

  Hi, I have XP NB100-12Z.

  My problem: how to activate WiFI withouth activation Bluetooth! With the Fn + F1 combination devices are on and turned, as the orange led is on but the manual say Wlan (unique feature) is on the combination Fn + \. With this combination, no other led appears. So is there a way to make independent WiFI and Bt?

  Thank you for your attention.

  Hello

  I m don't know how son NB100, but other laptops you could choose between WLan and BT or BT WLan together.
  Pressing the FN + F1 would allow BT and WLan functionality.

  But what happens if you press the FN + F1 again?
  Would you be able to move to a single option (WLan or BT)?

  If this is not possible and that the FN + F1 key combination would enable and disable WiFi and BT together so I doubt you could use WLan or BT separately.

• Satellite L - how to activate WiFi?

  It is possible to activate wifi without using the FN function because we no longer.

  Thank you

  Hello

  I don t know what laptop you have exactly, but if I understand you want to activate WiFi but the combination of FN keys don't work anymore, huh?

  Well, I think that s not possible but there is a simple way to make them work again:
  Reinstall the package of added value and utility to Support Flash Cards on official website of Toshiba.

  Have you tried that?

• ProBook 4430 s: cannot activate WiFi after Windows Update HP on ProBook4430s 10

  I've recently updated my work, a HP ProBook s 4430 laptop, 10 Windows, Windows 7. Once everything was done, I went to use my laptop and found out that he would not let me turn on Wifi. The physical button is enabled, with a white light. But if I click on "WiFi" at the right bottom, he disselects himself. The same thing happen with the cursor in the network and sharing Center. I click on it, and he returns to 'off' instantly. Help? I've uninstalled and reinstalled the driver of my network, I tried the troubleshooter. And I tried to find solutions on this forum before resorting to publish my own question.

  Remedy the situation after the reset of the BIOS default settings in the F10 menu.

• Impossible to activate the bluetooth on my G560e

  Hey,.

  I have a G560e and I can not activate my bluetooth. No button to activate the bluetooth appears when I press Fn + F5 and it doesn't seem to be any key on my keyboard or something. When I try to access Favorites Bluetooth I get the following message: "Bluetooth device not found. Check that your bluetooth device is properly connected and turned on.

  Is it possible that I don't have installed bluetooth devices, I read that not all models have it? Appers to device bluetooth as existing in the Device Manager, but the location is unknown. What does that mean?

  Thanks for your help!

  Hi, Odile.

  If you only see wireless power option when you press fn + f5, I think that your system did not come with bluetooth support.

  in this case, I suggest you use usb bluetooth.
  I hope this helps.