Impossible to add Actions to the button or MC

Similar Questions

• Drag the conflict of action dated the button action in Captivate 5.5

  My project involves a loop. After viewing some content on a slide with audio the user returns automatically, via on exit jump to slide (#5) that contains a table of widget buttons.  Slide #5, they can select a button widget and travel to another slide of their choice.

  No problem.

  I also want to put a classic transparent ('Return') button on the page that allows them to click and jump to the slide #5 if they want to get out of the jam on the content before everything has played and they are automatically skipped to slide #5.

  Problem is that the action of the button seems to be usurping the Jump out to the action of the kind #5 slide when slide reading over it crashes just instead of jump to the slide #5 - he's waiting for a click of the button. I tried to use a button widget instead of conventional, but the widget does not load #5 the top slide, so table of buttons (that display correctly when the slide is first played) recharge.

  I hope that someone here can help me with a workaround. All your ideas are welcome. You can see the project to http://goo.gl/ATx2c , this version does not contain the buttons of interruption I add.

  Thank you

  Lilybiri, you gave me the answer - indirectly.

  Use click box instead of the transparent button. Click on give box you a command "pause project until user clicks on. If you disable this function, the button is not incompatible with the action on the exit of the slide.

  Cool!

  As far as the widget on the slide table 5 buttons are concerned, I think the fact that they don't reload when you return, there is probably an artifact of the code of the key. Or something. 'Undocumented feature' ;-)

  Thanks Lilybiri.

• How to perform an action when the button is clicked reply all in BB email?

  I find the solution on below scenario, any help appriciated.

  User open a receipt email and click the 'reply to all' "."

  It is possible to perform any action on the button 'reply to all '?

  Thank you

  You can not interact with native applications except for adding your own menu entry (entries).

• Is it possible to set actions on the button "submit" a Quiz question?

  Is it possible to set actions on the button "submit" a Quiz question? I want to advance to the next slide or continue when they get the question right, or come at the end of the tent, they are allowed. I would like to eliminate the Next continue/button. Why does take two actions to come out of the slide? I use 8 Captivate.

  Not possible, or you you screw up the functionality of the quiz slide. Submit button is the most important object of each slide of the default questionnaire.

  I suspect that you are not on 9 Captivate but on an earlier version? Perhaps reading this article:

  Question Question slides in Captivate - Captivate blog

  You don't need the next to all button if you do not allow the review. If you allow the review, you cannot uncheck, because otherwise the user will be pasted on slides during the review. You can drag the next button under the light of the button (see article). The Send button will trigger actions Success/Last attempt, that you can use to your advantage.

  If you want to limit the submission of a single click process, you will find a scenario in the same article

• perform the action of the button method without raising of validation of text input

  Hello
  My English is not very good
  I use jdeveloper 11.1.1.3.0
  
  I have a button and an inputText (with validation) on the page. I set an action to the button method.
  When I click the button, the text input validation lift and method of the button does not work.
  If I put immediate = true for the button, then the validation raises, but in this case also the button method doesn't work.
  How can I run action method of the button without text input validation?
  
  Habib

  + 1

  the method must be called. Immediate = "true" on a circumvention of the JSF update model button so that for example submit and commit have no impact (just in case that's what you mean by method)

  Frank

• Define the actions of the buttons inside a loop for

  Hi, me again ^^
  This round is:

  I got a set of buttons and a text field where they load the content.

  I try to take a zillion functions and keep the neat code so I guessed I'd try set the actions to the buttons in the loop too. First of all, I had a few problems to the I counter inside the function onRelease (in fact I don't think I've ever had how do). But I tried this and it worked:
  Stop();
  var comprarXML = new XML();
  comprarXML.ignoreWhite = true;
  comprarXML.load('flash/comprar.xml');
  comprarXML.onLoad = checkLoading;
  function checkLoading (success) {}
  rootNode = comprarXML.firstChild;
  ButtonReleaseAndContent ();
  }
  function ButtonReleaseAndContent () {}
  for (i = 0; I < 12; i ++) {/ / my buttons are not dynamically generated, which is why the County.}
  btTemp = eval ('content.test.bt' + i);
  btTemp.txt.htmlText = rootNode.childNodes [i + 1].firstChild.firstChild.nodeValue;
  btTemp.temp = rootNode.childNodes [i + 1] Sublst.ChildNodes(1).ChildNodes(0) [1].firstChild.nodeValue;
  btTemp.onRelease = function () {}
  this.temp = content.test.test.htmlText;  the problematic line
  }
  }
  }
  On line where I put the text, I had one if "uh Yes, I may be refer to in the mc button, because the generated code goes in! So, I tried the this.temp, guessing it would be equal to the level of the key. A few seconds later I noticed that my SEO for the text field was not coming in the button, but the root. So I have no idea why this works. Anyone know what I did?

  If btTemp is a movieclip to assign dynamic properties (such as temp).  You can then retrieve this property when the button is released.

• Add actions to the BlackBerry 10 Android app navigation bar.

  Hi all

  I wore one for BB 10 Android app. I have observed that I get a navigation bar at the bottom of the screen, with icons defalult ('Back', 'info', 'Hide', 'Overflow'). I wanted to know is anyway to add our own actions (Ex: including buttons 'Previous' and 'Next') in the bar of navigation through source code Anroid.

  If not through the Android source, which is available workaround...

  Can someone also tell me is it possible permanently show the navigation (showing probably not 'hide' icon in the navigation bar) through Android code.

  I hope that my questions are very basic since am new to porting of BB, but very curious about things. Thanks in advance.

  Ah, it's also not possible.

• Actions of the buttons

  Hello, anyone might be kind enough to point me to a tutorial on how to add the chronology of the actions to a button. I just Flash and can't seem to find out how to do this in Animate. Thanks in advance.

  A Flash animation IS .

  http://blogs.Adobe.com/animate/welcome-Adobe-animate-CC-a-new-era-for-Flash-Professional/

  In any case, just click the <> actions button on the Panel to bring up the code snippets panel, which has examples of this.

• Left mouse click selects the button but does not execute the action of the button (for example close)

  HI - this seems to be a problem with Windows rather than the mouse, so any help would be greatly appreciated!

  First of all - I have a trackball M570. Works fine connected to another Windows 7 machine.

  But on a single machine including windows 7... I can use the left click for most, but in some applications, when I click a button it not actually click the button. Yes, he selects the button but it does not perform the button action. I also see the issue in the boxes, I can't put a tick in the boxes. Or at least I just figured someway by combining fast random space bar presses and presses mouse, but it is obviously not right. Couldn't find anything useful in google, so I thought I would try here in hope!

  Thank you for the pointers !

  Cheers, Jim.

  HI - Finally - I found a solution.

  First of all - the following solution worked for me, but there are possible solutions mentioned on the thread I linked in my previous email.

  The mouse is a Logitech wireless, with the SetPoint software installed. I also had a Microsoft wired keyboard and just in case that was the problem, I replaced it and - YES! All good new - in fact explains some other issues, I was less concerned. The problem with the keyboard was somehow screwing of the mouse.

  Since then I have been reduced to a media volume on the keyboard button, no idea how to solve this problem, and the replacement keyboard was free, so just get rid of the old. Note: I could use the old keyboard when I downloaded the Microsoft Mouse and keyboard Center, installed and disabled the offending button.

  Thank you, maybe my solution might help some people out there.

  Jim.

• not able to cal or action listener action on the button while using pop up on the same button

  Hi, my requirement is to call popup button and also action on the same command button, for this when pop up is successfully being cal called, but not in action. Are there other alternative for this? Jdev 12.1.1.6.0 regards, Parvez

  You import the wrong class.

  This is the you need to import classes

  Import org.apache.myfaces.trinidad.render.ExtendedRenderKitService;

  Import org.apache.myfaces.trinidad.util.Service;

• actions of the buttons do not work

  Opens a file that I had created some time ago to make minor changes. It has been automatically upgraded because it was created in an earlier edition. The only change I made was to change a button action to open a different web link.

  Action no longer works. Cursor does not detect link.

  Working now... had to put the button on the top layer.

• My triggers the mouse to the bottom of the actions on the buttons and STOP are ignored in 1.5

  Hey guys,.

  STOP triggers always seemed buggy, but once I have upgraded to 1.5, they do not exist. My calendar just right cheek on through them and the buttons that I put in place with the mouse down did not go to a specific label. My stage is set for AUTOPLAY. Is there a setting that could turn off actions and triggers?  I'm going crazy here with a deadline of tomorrow. Help, please!

  Thank you very much!

  Brian

  Brian-

  No, there is no adjustment.  In general, this means that there is a bug in the code for the action.  First, check if there are red warnings in the Panel (bottom right of the screen) warnings.  The next thing for you to do is to open a web Inspector as Inspector of Chrome or Firebug for Firefox to check if there is JavaScript not valid.

  Hope that helps,

  -Elaine

• How do I add eventListener to the button in a view state

  Hello

  Have a main.mxml with an init() function in which I want to add an eventListener for a button. The button exists in other that the State of opening, so my application crashes.

  How to define a listener of actionScript for this button? I used to do this in mxml, but I convert my work to the classes.

  Thank you

  Kristin

  you call init before the button was created

  average the most simple is instead of using includeIn, using folded property then its created but is not visible, so you can attach a listener

  or listen to the event creationComplete on the button

• Delay the action of the button URL.

  Created the button that activates the short animation what AND ALSO connects to the URL.

  I want the Viewer to see the full animation (26 frames that lasts about 1.5 seconds - 18 frames per second). Instead the button connects almost instantly to the URL, and the Viewer does not see the animation.

  Animation plays automatically (complete loop - 26 frames) what Viewer first opens swf/html. The same animation plays again when the viewer clicks the button to go to the URL.

  Is there a code in AS3 that can delay the connection to the URL before the 26 animation framework.

  I'm beginner/intermediate extreme novice and Flash Action Script (make the most of my research online coding ACE). Need to be led by my hand in Action Script.

  Here's my action script 3.0 and my animation (link to URL)

  teach_btn is the button.

  ------------------------------------------------------------------------------------------ -------

  It is a code that loads and plays up the animation when you open the file swf/html - code is on frames 1-25

  Stop();

  gotoAndPlay (1);

  function startMovie(event:MouseEvent):void

  {

  this.play ();

  }

  teach_btn.addEventListener (MouseEvent.CLICK, startMovie);

  It's code that connects the user to the URL - this code is only on the keyframe 26

  Stop();

  teach_btn.addEventListener (MouseEvent.Click, MouseClick);

  function mouseClick(event:MouseEvent):void

  {

  var request = new URLRequest ("http://www.webpage.com/")

  navigateToURL (request, "_blank");

  }

  Thank you

  the fastest way (but not the best) to help you do this:

  It is a code that loads and plays up the animation when you open the file swf/html - code is on frames 1-25

  Stop();

  gotoAndPlay (1);

  function clickF(event:MouseEvent):void

  {

  {if (MovieClip (root) .played)}

    var request = new URLRequest("http://www.webpage.com/")  navigateToURL(request,"_blank");
  

  } else {}

  MovieClip (root) .clicked = true;

  }

  }

  teach_btn.addEventListener (MouseEvent.CLICK, clickF);

  It's code that connects the user to the URL - this code is only on the keyframe 26

  Stop();

  navToF();

  function navToF (): void

  {

  {if (MovieClip (root). Clicked)}

  var request = new URLRequest ("http://www.webpage.com/")

  navigateToURL (request, "_blank");

  } else {}

  MovieClip (root) .played = true;

  }

  }

• dynamic generated tabs of the table, can not get the values incremented for the action of the button

  HI -.

  Here is the configuration:

  I have a basic table that has 6 values in there (i.e. the tabs).

  The tabs are generated without problem and when I discover things six show.  For example:

  Video clip: frame = 1 Target = "_level0.tabsMC6"

  so it's cool.

  Now when I go to configure the action of button for these babies, if I use the _level0.tabs.MC6 so that I can trigger button available for this tab or one if I change the value of tabsMC.  What I want to do is to try to reduce the code and have an increase in value of tab, but the best I could achieve is to have the last work in the tab.  What is interesting is that if I try an other tabs (1-5) they are all trigger tab #6.

  What I have right now is:

  function tabCount (): Void {}
  for (i = 0; i < _root.slideContainerMC.tabList.length; i ++) {}
  _level0 ["tabsMC" + i].clickerMC.onRollOver = function() {}
  _level0 ["tabsMC" + i].gotoAndStop("on");
  }
  }
  };

  (Note: tabList is the picture I mentioned above and Yes, in an another MC, which = code in every sense but I'm in a hurry)

  I need guidance is how to get all the tabs for the actions of the individual buttons.  I thought that the script above woul have then button actions for

  tabsMC1

  tabsMC2

  tabsMC3

  tabsMC4

  tabsMC5

  tabsMC6

  what it does exactly.  tabsMC6 is the only tab that will show you the status 'on' - I can ride on one of them, and it's the only tab that says this rather than EACH tab showing a State.

  Looks like I'm missing what is obvious!

  Thank you!

  you define tabMC0,..., tabMC5.  If you want tabMC1,..., tabMC6 use:

  function tabCount (): Void {}
  for (i = 1; i<=_root.slideContainerMC.tabList.length; i++)="">

  _level0 ["tabsMC" + i] .ivar = i;

  _level0 ["tabsMC" + i].clickerMC.onRollOver = function() {}
  This._parent.gotoAndStop("on");
  }
         
  _level0 ["tabsMC" + i].clickerMC.onRollOut = function() {}
  This._parent.gotoAndStop ("OFF");
  }
         
  _level0 ["tabsMC" + i].clickerMC.onRelease = function() {}
  This._parent.gotoAndStop ("delivery");
  }
  }
  };

  and the ivar part provided that you would need the ith tab to know that it is the ith tab.  Ivar stores that I have the value used when this particular tabMC was created.  If you don't need that, delete it.