Impossible to delete the files from the printer queue

Similar Questions

• delete the print queue

  Cannot delete a print (QC) have tried printing cancel but document is always at the bottom.  Managed to cancel other documents, even if none print due to the print queue that does not go away!   Have Windows 8 op sys

  None of the posted solutions seem to apply or solve the problem. Any suggestions?

  Gracias!

  Hello jldelvalle,

  Download and run the HP print and Scan Doctor using the below url...

  http://support.HP.com/us-en/document/c02073861

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Cannot delete the print queue.

  having trouble getting the print job to leave the queue.  MSG is "suppression".  Went through all the steps from this point up to 'FIX IT'.  Help, please

  Problem with printing, you can also consider that run these tools:

  http://support.Microsoft.com/mats/printing_problems/

  It will automatically fix it.

• Cannot print with hp psc 1350. Tried to delete the print queue and it just says: "delete."

  I tried to delete the queue for hours.  He says only: "delete."

  Hi Richard,

  You're probably on the right track. Try this:
  Type CMD in the search bar (startmenu) and right click on cmd.exe in the results. Now, click Run as administrator. At the opening of the CMD screen type:
  net stop spooler
  Then type:

  del/f C:\windows\system32\spool\printers\*.*

  And finally type:
  net start spooler
  (forgive me for stating a truism, but all three lines must be followed by an entry :)
  If you encounter this more then once, then you could save this in a batch file so you can just double-click the file to run the routine. That's how.
  Open Notepad and copy and paste below into Notepad.

  net stop spooler

  del/f C:\windows\system32\spool\printers\*.*
  net start spooler
  Now, save it as a .bat file.
  Must be run ad administrator when used.
  Good luck and we keep abreast.
  Sebastian

• Windows 7 on Dell Inspiron 545. Impossible to delete backup files from the drive d. careful that the disk is full.

  Constipated D drive.
  Warnings this drive D (backup) is complete.
  Tried to erase the contents of the disc without success.
  D drive shows a big red line...

  IMMEDIATELY STOP using the D drive and for the backup. The D drive is your recovery partition which is used to return your computer to the factory door specifications - IE to re - install Windows.

  Please get in touch with Dell to find out how to return the drive to its original state recovery.

• I deleted some files from my computer in win 7, that it is not in the recyclebin what to do

  I deleted some files from my computer in win 7, it is not in the recyclebin what to do? How do new pls help me

  Try this tool.
   
  Recuva
  http://www.Piriform.com/Recuva

• Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

  I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

  Boot into safe mode and see if it will remove. If this is not the case, try this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

• I get a msg saying windows media player cannot delete a file from the device. What should I do?

  I put an album on my sansa fuse. The synchronization process has not finished now correctly the album does not work on my mp3 player. I tried to remove it so that I can re sync and im getting this msg saying "windows media player cannot delete a file from the device." I also tried to delete the album directly from the mp3 player and it does not always remove. What should I do?

  Hi danat4489,

  You can follow the steps described in the article below and then check if it makes a difference

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• I accidentally deleted some files from the Recycle Bin permanently. They can be restored?

  original title: permanently deleted files?

  I am running Windows Vista and I deleted some files from the Recycle Bin permanently inadvertently.  They can be restored?

  Immediately stop using your computer for something else. Download and run a program like Recuva file recovery.  It might be able to help.
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Photosmart C6380 - cannot delete the document removed from the print queue.

  Photosmart C6380 - cannot delete the document removed from the print queue.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler , made service right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• I accidentally deleted a file from my USB. is it possible to extract the file?

  original title: the files on USB.

  I accidentally deleted a file from my USB. is it possible to extract the file?

  Try using one of the many recovery tools. R-Studio is good, but the ins' free t. Microsoft Student Partner

• delete the printer driver by political group or batch script

  I am migrating our server F & P from 2003 to 2008.  I created all of the printers in server 2008 and tested, and they print correctly.  Test the issue I am running is this: I can add the printer Server 2008 for fine local workstation, but users are unable to print the new queue.  If I go ahead and deleted the printer and remove the driver completely and then add the printer on 2008 server works very well.  So, I'm looking for a way to remove printers and drivers of each workstation via Group Policy or batch scripts to make my life easier.  Thank you.

  Hello

  Given that the problem is related to the windows server, I suggest you post this question in the Windows Server Forums.
  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

• trying to remove a document from the print queue

  Watch it of deletion, but will not erase.

  will not order process

  tried to stop the print spooler and then restart from a cmd prompt, but that has not worked.

  tried to delete the printer and then re install and that has not worked.

  turned printer off and then on, but it does not work.

  any help would be appreciated.

  Larry

  Windows 7 Home premium x 64 printer is on a network between two laptops worked this morning until what the printer ran out of ink and then after that nothing. is really the job queue on the laptop where the printer is physically connected?

  Joel S

  I had it deleted. There was a low ink messages. on the laptop where the printer is connected. the printer is a Dell 926.

  I used the cmd prompt as administrator. net stop spooler feeling then net start print spooler. This has allowed the queue on my wife's cell phone.

  and then did the same on my laptop and all clear and he then worked very well.

  Larry

• Error 0 x 00000709 when you try to delete the print job and/or pritner.

  Original title: error 0 x 00000709.

  I have a dell laptop running windows vista Home premium SP1 with a 64-bit operating system.  I tried to remove a printer HP 1310 on my computer and it is stuck on "suppression of 1", I stop, then restart the printer spooler and now I have error 0 x 00000709 when you try to delete the print job and/or pritner.   What can I do to remove this printer.   I installed a Canon MX330 printer, but due to the printer HP being locked, I can't print with a PictBridge compatible printer.

  Hi LauraD,

  You can try to remove the printer from the safe mode and check.

  Step 1:

  You can read the following article to start in safe mode:

  Start your computer in safe mode

  Step 2: Remove the printer.

  You can read the following article to remove the printer.

  Add or remove a printer

  After deleting the printer, you can start in normal mode and try to install Canon printer.

  Hope this information is useful.

• Files to send to the printer remains in the print queue

  My printer Brother HL-5470DW many years and has worked well as recently as a couple of days. Now start yesterday, everything I send to it (I've tried so far to print from Word, Notepad and Adobe Reader) just sits there in the print queue. (Also, I hear no sound, as if no communication to the printer took place; "I think that I do not usually such a sound, as if the printer wakes just.)

  It has always been possible to click Cancel for work out of the queue (which is what I do to ensure that each test is not blocked by the one who joined the queue before him). But by clicking on restart has not led to a change. No sound. Nothing, as if I had not clicked on it at all.

  I restarted the computer and that did not help. By turning the printer off and on again did not help either. The other printer on my network works, so the problem is specific to this printer. This printer is networked, too, but the network seems to recognize since, when I pull the ethernet cord our back, my computer seems to usually two tones you hear when you unplug a USB device as an external drive, and you hear the other standard two-tone when you plug the power cord back in - even ethernet once the same two-tone means when you plug a USB device.

  Troubleshooting Windows app recognizes a problem, presenting little yellow triangle used with an exclamation mark inside), but can't find anything wrong, despite the announcement of a great many things he checked with the result "there is no Question."

  This must be a common problem? But I have found no solution so far.

  I also opened a trouble with the brother society report on this subject, but they have not responded.

  Thanks for your help.

  I suddenly remembered that I have an account with Geek Squad which entitles to support me on their part so I called them, and the problem is now resolved. As a public service to anyone who is interested, I will present a report which re-start the computer, turning the printer then next turn, and re - installing the printer driver did not help (even if by turning the printer and turn it back on (that is, unplug and plug again at least there the message in the window of the printer to 'Pause' in 'Ready').)

  After these changes, we have reached at least point jobs were sent to the printer (they were no longer in the print queue), but when they got to the printer the results was simply that 'Data' and 'Error' lights came.

  Finally, something else has been tried: taking the paper out of the feeder and everything put back in. There is no reason that I see why this would work, but now all of a sudden he made. He had been without paper jams in this printer for months and months so that should have nothing to do with it!

  Although I don't see the connection, the tech support guy said that it had to do with the configuration of the printer port. And that fits at least with the fact that it is a new computer. According to that is the fact that - once we have solved the problem on this new computer - the old computer could no longer print: actually there now have exactly the same problem the new computer was seen: files sent to the printer simply remain in the print queue.

  If someone saw to offer as to how something so strange by removing the paper and put it back could solve that problem, I would like to know about it. Is there a way that this incident can be changed to a question in a discussion?

  Can anyone enlighten me as to what type of configuration of ports is involved and how you achieved it?