Check memory on remote PC

Similar Questions

• Satellite P200 - Parity Check / Memory Parity Error

  Hi all experts!

  After updating a driver, I get this above mentioned message.
  + Message ' hardware malfunction NMI Parity Check / Memory Parity Error.

  But just at the moment where the P200 falls in sleep mode. I can't wake up and have to do a hard reboot. Windows is starting and works perfectly and everything seems to be okay!

  Any idea?

  Thanks in advance!
  YB

  Hello

  This behavior can occur if a hardware component malfunctions, or if it has installed the damaged or incompatible drivers.
  I think that you should remove the driver updated or installed first.
  If this does not work, test the laptop with preinstalled system cool.

  Finally if this is insufficient, a hardware malfunction might be possible.
  In this case the RAM modules need to be tested as the first part.

• Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  I installed ENLWI-G2 802.11 g Wireless PCI Adapter in my Dell Optiplex 760 with XP SP3 32-bit Windows. But it gives me a blue screen with the error:

  Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  How to solve this error?

  Try to switch on the memory modules. Ask the MS site for more information on the specific error.

• Pavilion DV2000 - NMI: parity check / memory parity error

  My laptop was working fine and all of a sudden I got this blue screen with this message:

  Hardware malfunction
  Call your provider of support material
  NMI Parity Check / Memory Parity Error
  The system is shut down

  I have try the recovery disk and the computer back to its factory setting. It will be fine for about a day and then the blue screen light up again. I have try that 3 times now with no luck.

  Can someone please? I'm getting really annoyed that I run my business using my computer every day and I can't continue to recover and reinstall everything every two days.

  The laptop has 150 GB of memory with two 1 GB of Ram.

  What do you mean by delete a module?

  The computer cannot even load into the window before it crashes with blue screen.

  * Just realized there is the notebook section. I have post the same problem on this article and close this one here *.

• HP Pavilion G6: A broad check memory failed

  Hey all

  My HP Pavilion G6 has been giving me the BSOD (0x7A) recently so I ran some checks computer diagnostic provided from the HP recovery partition. HD and memory short tests came positive, but the failure of verification of the extended memory with the following failure ID: 9GE3L0-6567MK-MFPX01-401003.

  I also run windows memory test diagnostic and it came positive.

  Can you help me?

  You can test yourself by removing the bars of memory.

  Put one of them into the soDIMM slot then power and closest to you inside the laptop on the laptop.

  If Notepad boots into Windows and do not present problems or the faiols the test of memory, while you have not installed the module has problems and needs to be replaced by an identical to one that is installed.

  If the problem persists, then try to replace the module installed with the other and run the same test.

• How to check if the remote VPN failover is configured

  Hello world

  We have two sites and have both remote access VPN configured.

  IF a VPN site fails users automatically fail over to another site.

  Need to know what that orders can I run on ASA to check if remote VPN failover is there?

  Also what lines by running config shhould I seek?

  Thank you

  Mahesh

  Based on your configuration, it can vary, below link has someVPN failover configurations, you can find a few commands to check redundancy on your network:

  http://www.Cisco.com/en/us/docs/iOS/12_2/12_2y/12_2yx11/feature/guide/ft_vpnha.html#wp1093554

  What you should look at your config running is also based on your configuration, it should be something like: main, standby or emergency.

  HTH

• check-in at remote destination (how to)

  Hi guys,.
  
  I need to check in to a remote location.
  I understand that the base here
  
  < i > < /i > http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/archredo.htm#sthref1029
  
  I do haave to do with the use of a service name.
  
  But what I did not / do not have any service/database oracle on the remote server.
  I just want this place to be an additional backup for my archive logs location.
  
  T1) how can I achieve with the LOG_ARCHIVE_DUPLEX_DEST parameter?
  
  Q2) in the event of any scenario, arch and cannot write to the location of destinataion (e.g., complete hard drive) how many times it retries? If the attempts may be unlimited? I don't want to lose all logs archived.
  
  
  Rgds,
  Noob

  I do haave to do with the use of a service name.

  And that service re-present another name database.

  But what I did not / do not have any service/database oracle on the remote server.
  I just want this place to be an additional backup for my archive logs location.

  You can use OS commands to do this (not reliable), but if want to do so you need a database in waiting on the other side:

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28294/cascade_appx.htm

  Q2) in the event of any scenario, arch and cannot write to the location of destinataion (e.g., complete hard drive) how many times it retries? If the attempts may be unlimited? I don't want to lose all logs archived.

  http://download.Oracle.com/docs/CD/B10501_01/server.920/a96521/archredo.htm#4396

  REOPEN=n sets the minimum number of seconds before ARCn should try to reopen a failed destination. The default value for n is 300 seconds. A value of 0 is the same as turning off the REOPEN option. In other words, ARCn will not attempt to archive after a failure. If you do not specify the REOPEN keyword, ARCn will never reopen a destination following an error.
  
  You cannot use REOPEN to specify a limit on the number of attempts to reconnect and transfer archived logs. The REOPEN attempt either succeeds or fails, in which case the REOPEN information is reset.
  
  If you specify REOPEN for an OPTIONAL destination, Oracle can overwrite online logs if there is an error. If you specify REOPEN for a MANDATORY destination, Oracle stalls the production database when it cannot successfully archive.
  

  Kind regards
  S.K.

• NMI: parity check/memory parity error - how to fix? Laptop VYE

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Good afternoon Syed V.

  Finally was able to check the RAM, and it showed everything is 100% ok. Is a systems audit and which seemed to clear some things up, last night.  In reading your response, closed and restarted system yet so not out of the Woods. Also came to ask 'something' Ethanel and a new driver... don't know what who it was but impossible to find or make.

  I went in Bluetooth.  Automatic change has already been fixed, but I had two other listed users I deleted.  Also, I have been using a free software from Malwarebyetes and I don't want to delete that too.

  Thanks again for the help and here goes... see you soon. Bluepoppy

  _____________________________________________________

  Late afternoon, Hello.

  So far so good.  Boots up great.  Screen does not blink and the color is correct.  The mouse moves freely and without crashing and restarting. So far so good. Thanks for your help.  If necessary, I will contact again.  THANKS-Cheers. Bluepoppy

• Satellite Pro A100 - NMI memory parity error parity check

  Sometimes I get this BSOD error during 2 months.
  Hardware malfunction call your provider for support NMI: Parity Check / Memory Parity Error * the system stopped *.

  It can occur if the laptop is asleep, or even refreshing a screen save or Stand-By condition.
  Model PSAAPE - 00s00KEN 2 GB installed. I checked that the memory is installed correctly. It's a laptop very clean with no dust clutter things. Aside from the Ram "goes wrong" and developing a fault, can anyone suggest another cause? It doesn't seem to be an obvious solution to this problem on a forum I've seen so far. Maybe it's my RAM that fails (but it seems to do it when he is not be underlined!) It could be the video drivers... who knows? I hope somebody.

  Hello!

  In your case, I would check the RAM, I think that's the problem.

  You can do this with Memtest86:
  http://Memtest86.com/
  Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
  It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

  Good bye

• using ad to automatically is checked "remote assistance" in the system in the client PC properties

  Is there a way to do the above?

  The strategy has been set to allow

  There are many computers in my organization and I would use ad to facilitate this process.

  I already activate the option "provide assistance remotely" in politics in my ad, but this does not automatically check the box remote to the client computer assistance.

  Please notify.

  Thank you.

  Jericho

  Hi Jericho,

  Thanks for posting in the Microsoft Community.

  Since you are facing a problem to activate the option "offer remote assistance" in the client PC, the question you posted would be better suited for the IT Pro on TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows XP TechNet forums

• Windows/Microsoft asked PC Optimizer (Tel.No 0441234765093) to call users of Windows to perform remote health checks on the home PC? phone call received today stating that is the case.

  I received a phone call indicating that the person called the PC optimizers. They said that they had requested by Microsoft/Windows of people in an area to perform a health check on domestic Remote Desktop connection as there had been major virus problems in the area of the canvas. They asked check application warning and errors: my computer, manage, application section. They then talked by a procedure of execution for www.support.me to create the link.

  Can you confirm that this is a legitimate operation?

  I run my own COMPUTER business I get out to clients in their own homes.

  I came across this a lot with elderly people taken to the huge amount of money.

  This is a scam and nothing to do with any founded microsoft in the measure of the im aware.

  They take your pc remote access and updates actually spyware / malware on rather than remove it.

  I recommend telling them you have a pc and see how long takes the call.

• How to write a pl/sql procedure that checks the remote db?

  Hi all
  
  I have one criticism PROD remote database I want to check every 10 minutes for its connectivity. If the connection fails then an email and a text Message is sent to me.
  My question is what is the best way to check if the remote database is running?
  
  Can I use sqlplus system/manager@PROD? But sometimes this has taken so long and suspended. I want the best response time?
  
  How can I write a pl/sql procedure control connection? What do something like the ff:
  
  I created a table for my tnsname.ora entries.
  

  cursor is c1 select dbname from tnsnames_tbl;
  begin
      connect system/[email protected];
      print c1.dbname || 'DB Connection OK';
      exception
         when others;
          print c1.dbname || 'DB Connection Not OK';
      end;
  end;

  Something like that?
  
  Thank you
  Kinz

  Not really feasible at the level of PL/SQL.

  The reason is that the greatest strength of TCP's robustness. TCP will try as hard as possible to succeed, before failing. It was designed to still work on the severely damaged or broken communication as a result of nuclear infrastructure. A TCP connection can take up to 15 minutes, maybe even more, before failing. It can be as slow as a turtle-, but he's wearing a hardshell. (unlike the UDP, which is the opposite)

  So if you want to test the TCP connectivity, you must design your own custom code to implement your assumptions about the latency of packets, earthquakes and drops and so on.

  Otherwise, you will need to use a standard TCP socket, set a time limit, try to login - and hope for the best.

  This approach, I have demonstrated in {message identifier: = 10111306}.

  If the TCP test works, it means that the listener is in place. Does not mean that the database itself is in place. Which means then using a database link to be tested. And this in turn can hang due to problems with archive record being stuck, not enough idle servers shared, etc..

• Satellite Pro P200: Cannot install Server 2003 - parity memory error

  I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

  -Hardware malfunction

  Call your provider of support material

  NMI: Parity check / memory parity error

  -The system is shut down

  I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

  So, how tested the RAM? With Memtest? Or Prime95?

  I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

  I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
  Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

  So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

  Sorry dude, but I Don t have a lot of ideas in your situation :/

  Welcome them

• Satellite P200 - 1FC - parity memory error

  I hope someone can help! The laptop freezes randomly with the following message is displayed:

  * bad operation of the equipment *.
  Call your provider of support material
  NMI: Parity check/memory Parity error
  * The system stopped *.

  We must shut down the computer and restart it and now starts without a problem. Previously, we had to leave 12 hours or more.

  Any ideas what could be wrong? Laptop is only 18 months old.

  Thank you very much

  Hello

  I tried a bit with Google and it seems that this message apperas caused a faulty RAM or HARD drive. So, you should try to test the two pieces of material with special test tools:

  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  http://Memtest86.com/
  Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
  It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

  I hope it's useful for you! :)

• Extension memory for my Satellite 1900

  Have a Satellite S1900-303, want to 1 GB. the manual States 144pin so-dimm pc133. Some Web sites to check memory recommended as 200pin, nothing on the site of Toshiba on this model, which is correct please?

  Hello

  According to the specs of this device can deal only with max 786MB of RAM.
  I put t know how many pins have the modules but I found this compatible module for your device is:

  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

  Please note that this machine has two expansion slots, but 1 slot is not extensible user (probably this one with 256 MB) original!