Impossible to enter the computer because of the message

Similar Questions

• Impossible to enter the product key

  I have a business degree in volume for Windows 8, I loaded Windows and it works but I can't enter the product key, I thought impossible to activate now, it gives me the following information. Error0x8007007b the file name, directory name or volume label syntax is incorrect. I tried Microsoft helpline was everywhere in the world, but no one was able to help

  Press Windows key + R

  Type: slui.exe 3

  Press enter on your keyboard

  Enter your product key and clicm next to activate via the Internet.

  or

  Make sure you get a key activate several of your MSDN, Technet or volume license subscription

  Click with the right button on the left corner of the screen of Windows 8

  Click prompt (Admin)

  Type: slmgr.vbs - ipk

  Press enter

  Then type:

  slmgr.vbs - ato

• HP Notebook 15 ac 123TX: impossible to enter the boot menu

  I am not able to go to the boot on my HP Notebook 15 ac 123TX menu.  I tried to type esc and a few other function at startup keys, but it just starts normally. Please someone tell me the steps.

  Thanks in advance.

  Hello

  Shut down the laptop - if you're running Windows 8/8.1 or 10, this by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Now, try typing away at the ESC key as you as soon as you press the button start and see if it jumps to the Start Menu.  If this is the case, select f10 to enter the bios menu.

  Kind regards

  DP - K

• Impossible to enter the serial number but the keyboard works fine.

  I am trying to install the suite CS6 but when asked for my serial number, I can't enter my serial number but my keyboard works fine... Help, please

  What is a cloud or a non-Cloud of the CS6 version?

  You enter numbers only, or you try to enter the letters?

  You use the numbers on the top of your keyboard, or the numbers in the section on the right?

• Impossible to enter the Inbox in outlook, but can read my messages through NTL?

  I can't get into my Inbox it remains empty and when I try to exit Outlook express, he says that the program is not responding. Through NTL, I was able to read my messages, but it is a very round end how to read my messages. Help!

  Do not give up yet. In the old identity. Tools | Accounts | Mail | Properties | In general. Uncheck the box: "include this account...". ».

  Switch to the new identity and send yourself a test message. If you don't get it, check your settings again. There is no reason it should not work.

  If this does not work, try to import the messages. If you can not, create folders on the desktop for each folder in the old identity with the messages you need registered. Open an OE folder and highlight all messages and drag them into a folder on the desktop.

  In the new identity, highlight all messages from the desktop folder and drag them into an OE folder you already created.

  To your address book:

  Open the address book in the old identity and file | Export | Address book (wab) to any location on your HARD drive that is easy for you. The office is very well. Then, open the address book in the new identity and file | Import | Address book (wab), and then tap on where it was saved.

  You should now have all messages except the Inbox, correct? To do this, see first if there is an Inbox.bak file in the trash. If there is, post back for more details. Otherwise, you will need a recovery tool.

  DBXtract
  http://www.oehelp.com/dbxtract/default.aspx

  DBXpress {faster for large files}
  http://www.oehelp.com/DBXpress/default.aspx

• Impossible to enter the title of the document when you use the model of two columns left navigation

  I use DW 8, two columns left navigation model to rework my company Web site. My level of experience is probably beginner (known in Web design database and update existing sites; minimal associated style sheets).
  
  From the model mentioned, I created a template for my business site and saved it as "template.dwt." Then, I created a new page using this template. I click in "Title" and type the title of the page, but it defaults to "untitled document".
  
  I tried to follow the message thread of beachnut2 to "Model has locked the title of the document", but got lost. I followed the advice of Murray "create a new page. Save it as a template with FILE | Save as
  Model. Look at the code. The code on this new model, I created is as follows:
  
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
  < title > Untitled Document < /title >
  < / head >
  
  My model based on the two-column template is as follows:
  
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> <! - DW6->"
  < head >
  <!-copyright 2005 Macromedia, Inc. All rights reserved. ->
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
  < title > Untitled Document < /title >
  < link rel = "stylesheet" href = "2col_leftNav.css" type = "text/css" / > < / head > "
  
  If I do the above tag looks like the blank template, I created, I lose the stylesheet link before the < / head > tag.
  
  Any suggestions on how I can fix this?
  

  Thank you for your quick response. I thought I had followed your instructions by creating a new document and save it as a template. The mistake I made was selecting a new basic HTML when I was selecting the new model basic HTML. This time, I got the correct tags, the copied on my model and it works now. Thank you for your help.

• Impossible to define the message filter in Thunderbird 31 (screen disappears)

  To attempt to define a message filter, I can enter the relevant details in the FIRST screen, but when I click 'OK', the second screen ALWAYS then disappears.

  Thank you.

  DAVE

  Can post you some screenshots? I have no idea of this "FIRST screen" and "second screen" is.
  http://support.Mozilla.org/en-us/KB/how-do-i-create-screenshot-my-problem

• When I send a message firefox says that it is impossible to place the message in the sent file

  The program stalls just when he tries to save my sent mail and I have to respond to an error message and tell him not to save the message. However, he seems to have recorded correctly in the sent mail folder.

  Thanks for your reply... However I have had no response from Thunderbird or Mozilla on my question, and I don't know where to go to follow on that. Could you help me with this
  Thank you

• Often impossible to read the messages on the iPhone 6

  I have an iPhone running iOS 9.3.2 6 (13F69) - scrupulously maintained!

  When voice messages are recorded, often - but not always - the message is unable to play. I could wait to touch the triangle pointing to the right, immediately to hear the recording. Instead, the two vertical bars appear briefly, followed by refresh the triangle pointing to the right. No message not read.

  I tried (1) exchange of the application of the phone upward and outward, (2) restart the phone and (3) [1] followed [2]. No luck.

  Very frustrating. I've seen other posts on this subject, which goes back to the iPhone 4S days, with none of the clues that seem to help. This is a persistent problem, or does have a suggestion?

  Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

• BlackBerry Smartphones eception exception error when entering the "Messages".

  I have a client who uses a Blackberry World Edition (8830) and when it tries to go in Messages (by clicking on the Messages icon) it gets this error message all the time: uncaught Exception: java.lang.null.pointer

  I tried 2 types of resets, alt + Cap + del and tried to remove the battery when the BB is running and the same thing, I did a hard reset, that is wiping the BB and customer has left me a message this morning that he always gets the same error message.

  My BES Console (synchronize us with Domino servers on a Lotus Notes platform), I see that he has the

  version of the 3.0.0.81 platform

  The BlackBerry version: 4.2.2.196

  His blackberry had a Bell Mobility service.

  At present, the only other thing I can think of is to download the operating system and reload it on the BB using Desktop Manager.

  Can someone help me with this please.  I appreciate all the help.

  Robert Goupil

  BES administrator

  * Update - my client turned on his blackberry with the BES this morning and sent a message that, after activation, the problem seems to be resolved.  Now, is there something different that can be done in case this happens again, we have more than 800 users of blackberry and most of them have the 8830 model.

  Hello

  Your troubleshooting actions have been directly on the money, I see.

  HRT is the host Routing Tables. It's entries sent by the carrier.

  When you highlight the entry above and you click on register now, he recorded with the wireless network. Update the details of the device on the relay of the rim and down icons specific carrier or applicants

  I think that the problem existed in an application corrupted on the smartphone users, by recording the phone, the application

  has been refreshed. It's the first time I've seen this particular exception message solved without device

  reload. (Just for reference I read messages 133150).

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• Impossible to enter the computer

  We have a computer primarily for use with tv.  It has Windows 7 and despite the fact that we have an anti virus on it, (one of the most highly recommended) it was hit by Trojans and is is inflamed.  We had to force a shutdown down and now unable to get back in.  It does not recognize the password and try the reset password, just an error message. Can anyone help please?

  Hello

  Malware may interfere with passwords.

  Download, install, update and scan your system with the free version of Malwarebytes Antimalware in Safe Mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  It is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• Pavilion a1710n impossible to enter the BIOS from the put in new hard drive

  I have a HP Pavilion a1710n desktop initially under Vista Home Premium.  Problem is hard disk came out, I then replaced with a hard drive Western Digital SATA of similar type.  However, now I am unable to enter BIOS using F10 or Escape or by pressing the F1 key turning on the PC.  When I tried to put Vista on the PC, it stopped and gave me an error 0 x 80070002; Lack of D:\Sources\Installation, which I do not know what it means exactly or how to fix it.  I had already updated the Vista Home Premium to Win7 Pro.  Given that the disc is a disc update of Win7, guess I'll have to reinstall Vista first and then update again to Win7 Pro?  At the moment everything I have on the PC is the new hard drive without any Windows operating system and my PC doesn't seem to be reading the new hard drive, I think, and in the Start Menu, it is shown as 3rd master drive and DVD is 2nd Master.  So what happened the 1st master?  No what should be my new hard drive?  I'm always so frustrated and of course, my PC is long out of warranty, although I tried calling support without much help I'm afraid.  Any help would be greatly appreciated.

  Hello again patticat22,

  Thank you for responding to my message. If I understand your reference Bravo you check to see if you can find a solution? If and it would be better to search for accepted Solutions because they are used to indicate that a solution has been found, where a Bravo must indicate appreciate for a position.

  As for your question, I think it could be a drive for the failure of the installation that you have and recommend you order another set. I'm you provide a link to the HP Support document: looking for HP recovery discs or a USB HP recovery disk?, which has all the necessary steps to guide you through the ordering a new set of recovery disks. There may be a fee for ordering them, but I think this will solve your problem and get your computer back operational.

  So you can try to use the HP support document: removing and replacing the CMOS battery, that you want to remove the battery (keep out 24 hours before putting it again) and put it back. This should clear your BIOS and reset back to factory. If the BIOS is still inaccessible after that, I think it would be best if you contacted technical support HP for repair options.
  
  United States supports Contact link options HP products purchased in the United States.
  Outside WE support link to connect with options for HP products purchased outside the United States.
  
  Please re-post though I have well understood you or if you need additional support. Thanks for posting on the HP Forums. Have a great weekend!

• Impossible to enter the telephone number during the application free trial

  Hello

  I am applying for the UFT HP (formerly QTP) carry out a feasibility study check on a system at my workplace.

  However, when I reached the part of the form that asks me my phone number, I don't do anything enter successfully without precisely knowing that my number is not acceptable.

  I have tried everything - hooks of the area code, 0 instead of + 44, halves between the 2 dashboard of the number without the dash, a halves to separate the 2 space number - nothing works!

  It's incredibly annoying, because I just want to test the software out, a nd if it works I will get a license.

  Can someone please help me with this?

  Thank you very much

  Hello Basijan,

  You want to ask your question on the HP Enterprise business community which is a forum for the company's products.

  Here is the direct link to the area you want.

  News of functional tests (formerly QTP) unified and Support Forum - HP Enterprise Business Community

  It will be useful. Good luck.

• Impossible to enter the URL in address bar 36.04

  When I type in a URL in the address bar and press ENTER, nothing happens. I had other problems since 36.04 was presented today. Windows XP on your desktop.

  This problem has been resolved by removing the Firefox compatibility property. Many thanks jscher2000!

• Impossible to enter the XP laptop, I forgot the admin password

  Recently, I forgot my admin password on my computer laptop xp. I can't. All the suggestions I got works only when I am logged in as admin. Now locked. I can't even to the configuration to change the boot sequence to reinstall xp. Please help me. Am just stuck.

  * original title - blockade of XP Admin pass *.

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd