Impossible to find DAQmx create Task.vi and many other VI

Similar Questions

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• HP EliteBook 840 G3: Impossible to find acquisition of ICP data and Signal Processing controller, memory controller, PCI and SM...

  Hello

  I can't find acquisition of ICP data and Signal Processing controller, memory controller PCI bus controller SM for HP EliteBook 840 G3 running Microsoft Windows 7 Enterprise (64-bit).

  Any help is greatly appreciated!

  Hello:

  See if this driver works...

  FTP://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74152.exe

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• Error 200485 error has occurred to DAQmx create Task.vi:2

  I continue to have this error:

  The specified task cannot be loaded because it is not in the area of data.

  Check the data area to the MAX. You are looking for similar characters, such as the capital letter 'o' and the number zero.

   

  
  I would like to know what is the problem with the program.  I have attached the VI.

  Basically I'm controlling a physical light connected to the NI Elvis II by comparing input from 0-7 DIO and DIO 8-15.

  So if DIO 0 is enabled, 8 DIO must also be to turn on the LED.

  But for the moment, the program may not run. Need assistance to locate the error! ><>

  Try the function AND.

• Is - this "you must buy one at a time or all requests to get those I want?" Impossible to find any information about it and can't contact Adobe. No more hotline number.

  Sorry but I need help I can't find anywhere, I keep asking on the Adobe web site.

  What I have to, but all iCloud applications just to get what I had in CS6?

  What do you have in CS6?

  Clouds plans come in two main flavors: full or simple App.

  If you need only 1 or 2 apps and 2 x plans unique App are the cheapest.

  If you need 3 or more apps Complete is the way to go.

• I'm stuck on my account. This happens fairly regularly. It is almost impossible to find the number of apples and communicate with them.

  I'm constantly locked out of my account.  Why it can't get Apple as well as several accounts? Whatever you do, never having accounts families or several user names.  Information in addition to 60 Days (?) to connect with another Apple ID pending?

  Manage your devices in iTunes - http://support.apple.com/HT204074 - regarding, "When you turn on iTunes game, sharing family or automatic downloads, or when you download past purchases on your computer, iPhone, iPad, or iPod touch, this device becomes associated with your Apple ID. You can associate your Apple ID with up to 10 devices with up to 5 computers at any time. Each computer must also be authorized by using the same Apple ID. You don't need to authorize your iPhone, iPad or iPod touch.  "After that you associate a device in your Apple ID, you cannot combine this unit with another Apple ID for 90 days.  If you sit down and reason through you can do that Apple probably knows very well what she does and is likely to do to pressure from media companies who don't want a dormitory full of students turning on file sharing for all their media for an orgy of hacking.

  Don't put yourself in a position where you have to re-download. Make sure you have all your purchases backed up to a local disk. It's smart to do it anyway because if an item comes form the store that you are not able to re - download.

• Impossible to find more information on KB3177723 and KB3179573 on the MS Support Website updates

  Two updates (an option and important) say they need to be installed in my Windows 7 computer.  But when I click on 'more information' in the Update window, I am taken to a Web page on the MS support site that says: no information is available.  In addition, when I search KB3177723 or KB3179573 on the Microsoft.com site, no information don't lie on these two updates.

  Info from Microsoft KB 3177723 and KB 3179573 just showed on their Web site.

  https://support.Microsoft.com/en-us/KB/3177723

  https://support.Microsoft.com/en-us/KB/3179573

• I can't find any games (solitaire freecell of Spider etc...) defragmentation of system, cleaning disc and many others. Where did they go?

  I have IE 8, that he was already on the PC when I bought it used.

  Perhaps the following steps will help you get started...

  Try to go to... Start / Control Panel / Add or remove programs / add/remove Windows components.

  For the games... Choose accessories and utilities / details button...

• Police on Google, Facebook and many other sites, but not all, is "BOLD", no matter what I do.

  Since I installed Firefox on my newly-fixed computer (has been completely annihilated, installed FF 06/05 / 15), fonts for several sites has been "BOLD", regardless of how I set my preferences. It comes to Facebook, Google and Gmail. If I say not to allow pages to choose their own fonts, this problem is solved, but the characters such as arrows do not appear on other sites.

  What I really want is to be able to see that I read something by having make it back to normal, rather than "BOLD". The only way I can do it is by prohibiting the pages to choose their own fonts. Is it possible to fix this?

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  Some display drivers also have parameters that can affect the appearance of fonts.

  Were you able to find which fonts are assigned by the police test?

• Atrix gave me. And many other

  I found a topic in which a person of the Portugal complains its Atrix 4 g. He's no more. No matter what he does: master reset, master clear... In fact, he won't even a master reset because it does not illuminate. You can try taking the battery or any other attempt to turn it on. If you have something to offer, I'd like to hear, but it seems quite difficult to understand why Motorola has not taken measures to correct the problem. In Brazil, in a website called "Aqui advertising", something like "Complain about here", Atrix seems to be a champion in complaints about the same problem: its resistance to work:

  http://www.reclameaqui.com.br/1935247/Motorola-do-Brasil/MEU-Atrix-4G-desistiu-de-funcionar/

  http://www.reclameaqui.com.br/1368641/Motorola-do-Brasil/Motorola-Atrix-Nao-funciona-quebrou-com-10-...

  http://www.reclameaqui.com.br/1567293/Motorola-do-Brasil/Motorola-Atrix-NAO-comprem/

  http://www.reclameaqui.com.br/1448321/Motorola-do-Brasil/Comprei-UM-Atrix-e-como-outras-pessoas-com-...

  http://www.reclameaqui.com.br/1704345/Motorola-do-Brasil/aparelho-celular-Atrix/

  http://www.reclameaqui.com.br/1315577/Motorola-do-Brasil/celular-Atrix-Parou-com-13-Dias-de-uso/

  http://www.reclameaqui.com.br/1400664/Motorola-do-Brasil/Motorola-Atrix-desligou-Sozinho-e-NAO-Liga-...

  http://www.reclameaqui.com.br/1665614/Motorola-do-Brasil/Motorola-Atrix-2-apagao-em-menos-de-3-Meses...

  http://www.reclameaqui.com.br/1861473/Motorola-do-Brasil/aparelho-Motorola-Atrix-com-problema/

  Motorola should take knowledge of that. And correct the situation. I find it ironic that the inventors of Six Sigma are not able to fix their own products. Is not to say that it is something wrong.

  I'm glad you understand Portuguese, AlphaDog. It's just a shame you do not understand it very well. All cases involving the same problem. And they do occur not only in Brazil, but everywhere in the world:

  http://Forum.xda-developers.com/showthread.php?t=966071

  http://Forum.xda-developers.com/showthread.php?t=1334724

  http://Forum.xda-developers.com/showthread.php?t=1017679

  http://Forum.xda-developers.com/showthread.php?t=972672

  https://supportforums.Motorola.com/thread/51704

  http://www.atrixforums.com/Forum/Motorola-Atrix-help/1350-Atrix-will-not-power-up.html

  http://www.atrixforums.com/Forum/Motorola-Atrix-help/2608-wont-turn.html

  http://www.atrixforums.com/Forum/Motorola-Atrix-help/1488-Atrix-wont-power-up-wont-charge.html

  I could try to find all the complaints about the same problem in all languages, mainly in English, is Motorola give some thought the problem and try to solve this problem, but, the response you gave me, and has held the official position of the company, is not what Motorola wants to do with this forum. The problem exists, you know, and you try to deny it.

  I managed to solve myself, after reviewing all those forums. When the battery is completely exhausted, only phone with the Motorola charger official charges, not with a USB connection or with the official Motorola charger for cars. When he has left fee it charges in any way. This is a bug, and you should fix it. Not deny it.

• c:\WINDOWS\$NtUninstallKB975713$ and many other records of the same kind

  Windows folder became 3, 9 GB in size. Is iz possible to delete these records?

  If your PC behaves properly, you can remove the hotfix Windows backup hidden files that start with $NTUninstallKB to the WINDOWS folder. Be aware that once they are removed you will not be able to uninstall the updates they represent. There are two ways to do:

  A. manually, but copy files on a CD/DVD first to enable their restoration has a fix must be removed thereafter. Now delete the folder \WINDOWS, but leaves the orphan entries to add / remove programs intact. Remove only the $NTUninstallKB files that relate to corrections, not those for applications such as Word, WMP, etc.. In addition, DO NOT DELETE THE folder$ $hf_mig.

  B. my preference goes to run a script that also removes the corresponding entries in Add / Remove programs. Once they are deleted by the script, they cannot be restored. Download, extract and run this little scripthttp://www.dougknox.com/xp/utils/xp_hotfix_backup.htm creating a system restore point first just in case something goes wrong when the update of the register.

• Installation of XP pro sp2 stalls to the file teamw.exe then ks.exe and many others.

  I'm trying to re - install XP pro SP2 after a virus attack.  I did a full format on my WD 160 GB hard drive.  Serial ATA Mothboard Biostar G31 - M7 TE with the most recent BIOS.  Generally, installation hangs when you attempt to load the file "teamw.exe" the file depending on whether he's looking for is ks.exe there are twenty others subsequently that it cannot find.  I tried another disc with SP2.  The same problem.  I joined my current version to SP3 with the same result.  Thought it might be a hard drive problem.  A ran the WD disk checker rescuer in the BACK.  No problems found.  I don't think that is the motherboard related.  Would be - this somehow a hard drive problem?  No other equipment still installed.  It drives me crazy.  Thanks for your suggestions!

  Hi Indiana brand,

  Whenever there is a problem with the Windows XP disc, we encounter this type of questions. We recommend trying the following steps and check the result.
  a. installation to launch Windows XP.
  b. when the file fails to copy, remove the disk from the CD drive and insert the other XP CD in the drive to see if the copy process continues successfully.
  c. If the installation continues, complete the installation.

  See How to install or upgrade to Windows XP

  If all else fails, contact the manufacturer of the system for more support options.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ACCESS DENIED ON LOCAL Q: DRIVE AND MANY OTHER FILES

  When I try to access files or my local disk it says access denied and Ive tried to appropriate via a right click > properties > Security tab, it always says access denied, please someone help me?

  Drive Q is created when you install the version of Click & Run of Office 2010. This disk is part of App - V [1], the MSapplication virtualization technology used for the click and the racing version. Cannot remove this disk or change the permissions on it.

  André

  [1] http://en.wikipedia.org/wiki/AppV

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Error code: sec_error_unknown_issuer when opening Gmail and many other trusted websites!

  I tried to open G-Mail and a few other trusted sites and Got "this connection is untrusted" with error code: sec_error_unknown_issuer.

  There is no other button then "get me out of here".
  Date and time are also defined in law.
  I use Eset Smart Security 7 and Firefox on Windows 8 unique.

  I faced this problem right back in Firefox 2 days only. All other browsers (Chrome, iron, IE10) work as usual.
  How can I solve this problem?

  Concerning

  If you use the feature of ESET that filter web traffic, this problem could be caused by ESET intercept your secure connections and presenting a false certificate. If you see ESET as the transmitter, you have a few options:

  (1) disable SSL filtering

  This would solve the problem instantly, but you would have less protection. Check the documentation of your product for specific details, or if you have ESET NOD32 ANTIVIRUS 7 look under:

  Advanced Setup (F5) > Web and email > Web access protection

  Here you can adjust if HTTPS is scanned. (At least, so according to this manual.)

  (2) try ESET automated to import certificate

  This will allow Firefox to accept the false certificate signed by the certificate of ESET.

  These steps are listed on the forum of ESET:

  • With all browsers and e-mail clients private, disable SSL analysis (Advanced setup (F5) > Web and email > Web access protection, I think under protocol filtering > SSL), OK change
  • Re-enable SSL scanning, OK change
  • Start Firefox and test

  (3) manually import the certificate ESET in Firefox

  This will allow Firefox to accept the false certificate signed by the certificate of ESET.

  According to the manual, you can export the certificate to ESET under:

  Advanced Setup (F5) > Web and email > access protection Web, perhaps in the section protocol filtering > SSL

  Search

  See the certificate > Details > copy to a file...

  Once you save the file (probably with a CER) you can import it using the certificate Firefox display.

  "3-bar" menu button (or tools) > Options > advanced > mini-onglet Certificates > "view certificates" button.

  Click the References tab and then click the import button.