Impossible to get 3 SATA speed edge 15 laptop (0301-JDU)

Similar Questions

• HP Pavilion 15 laptop-n096ea - SATA speed?

  HI guys,.

  Hoping for a little help, I searched here and google but can't find the answer if nobody knows the SATA speed for this laptop ((SATA I II III))

  Thanks for the help

  Rich

  Hi, rich:

  Starting with the Mobile Intel 6 Series chipsets, support SATA III on at least two of the ports there.

  Your model has a chipset Mobile Intel 8 series, so a hard drive SATA III would go to the full 6.0 Gbit/s spec.

• Negotiated SATA speed

  O.P.

  Hello.

  Try to establish if the optical SATA connection on an iMac in early 2009 will achieve 2 SATA speed of 3 GB with a 500 GB SSD crucial MX200. Have already tried a Sandisk ultra 2 with controller Marvell and only got a negotiated speed of SATA 1 which is 1.5 GB.

  Speculation on the Internet is the optical connector is limited to 1 SATA but when I go into system report that it shows that the port is capable is SATA2, but negotiated to SATA1. Don't want to destroy this iMac again until I am sure that it will work to speed SATA 2.

  Thank you

  The SATA connection in optical Bay is SATA 3.0 Gb/s. It is likely that your iMac is a Nvidia MCP79 SATA controller that will limit some SSD speeds 6 GB/s SATA 1 speed. The conflict focuses on Sandforce technology and the Marvell controller apparently uses Sandforce. Your is the second instance of the problem with a Marvell controller that I answered last week. Return the SSD for a refund and get a Samsung or go to OWC and get one of their 3Gb http://eshop.macsales.com/ SSD

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?

• E072sa Sata speeds

  Hello

  I have an e072sa that I use to do some basic development on and played with the idea of putting an SSD inside.

  What sata speeds argues this machine with the chipset AMD A76M CHT, I seem to have found a vague answer of what is a sata 2 ports, but want to ensure

  Hi t3hbr3tt, welcome to the Forums of HP. I can't find the exact SATA revision, but page 103 of the maintenance and Service Guide shows 5 hard drives available, and they report SATA @ 1.1 GB/s. This makes it look as if it were 1 SATA.
  
  I think that I also found the reference for the chipset AMD A76M CHT support SATA II.
  
  You might be able to check the SATA using PC-Wizardversion. It is provided by the same people who provide CPU - ID.
  
  It's a good program, but as with most free software, it is ad supported. Be cautious of links ad on the web page. The download link you are looking for is on the right, next to the yellow icon "2013.2.12 setup. After that, the purple download button will start the download. Once backup to your computer, read each screen carefully. I did not want to install the additional ad software supported it asks you to install. When I did it asked to install "Advanced System Protector", I disabled it before clicking on "continue".

  Once it is installed, you can find the SATA support, by clicking on the icon of the motherboard. Then the Chipset. Below will populate a list. Search for "features on the device" which should contain the information you want.

  Let me know if it helps.

• DV 6700: sata speed

  Need to determine the sata speed... not sure if 1,2 or 3

  Thank you

  Hello:

  The sata controller this model is SATA II (3.0 Gbps).

  I had the same model with the same processor and chipset series.

  You can confirm that with the utility I've zipped to the top and attached below.

  Download, unzip and run the utility.

• Impossible to get Vista SP2 installed

  Impossible to get SP2 to install on my windows vista 32 bit

  Download the SP2 installation file in a folder on your hard drive, then double-click it to start the installation.

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Service Pack 2 for Windows Server 2008 and Windows Vista
  http://TechNet.Microsoft.com/en-us/Windows/dd262148

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How to get sync high speed off faster with a 60 d and 430 ex ii camera?

  I try to get my speedlite 430 to sync high speed with my camera off camera.  Once I did all that I can't get a shutter speed of 250.  I need the higher speeds for what I want to do and I need the flash off camera.

  What do you use to control the 430EX II off-camera?  You have a speedlite controller or another flash speedlite?

  The 430EX II supports Sync high speed when it works as a remote off-camera/slave flash, but it's automatic.  If the flash unit is set to use high sync speed then the slave will also use high sync speed... you have not actually the value of the slave in sync mode high speed.  (See page 29 of the manual 430EX II).

  If you use the built-in on the 60 d flash to trigger the 430EX II then this could be the problem because the built-in flash does not support Sync high speed.

• HP 15-e020sa SATA speed

  Hi, I'm wanting to know if my phone will support a SATA III (6 Gb/s) SSD SATA III speeds or support it only speed SATA II?

  Laptop HP Pavilion 15-e020sa

  Product number: E0Z62EA

  That is because there is probably a sata II hard drive that HP installed in your laptop.

  Highly unlikely that they put a sata III lead in it.

  Ask yourself this... Why HP would connect a sata II port to the reader if there are ports of sata III available?

  Product specifications state that your laptop comes with a 1 TB drive 5400.

  I googled the part number for the drive of your laptop for repair and it is indeed only a SATA II.

  http://www.ultratecdirect.com/Stocklists/searchresults.jsp?textSearch=676521-001

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• Get links from speed negotiated CF using Cisco Powertool

  I can get the speed of the uplinks to network on the FI-s Cisco with the command

  Get-UcsFiLanCloud-Id "A" | Get-UcsUplinkPort - AdminState 'enabled ' | ForEach-Object {$_.adminspeed}

  However, there is no option to get the speed negotiated in the rising Fibre Channel on the Cisco FI - s. There is no property AdminSpeed of the output of the command below

  Get-UcsFiSanCloud-Id "A" | Get-UcsFcUplinkPort - AdminState "enabled."

  Is it possible to get the negotiated speed of the CF links? If so, please provide the command powertool.

  You can take a different approach to get them.  I said that the 'network element' cmdlet to get all the IFS, specify the 'Module' I want to get the information of (id 1 = fixed ports, code 2 = the first slot for expansion into the FI, id 3 = the second extension in the FI slot, if present), specify the FC port groups, get all of these ports and then use a select statement to filter down.  As you can see below, my FC ports are negotiated at 4gpbs.

  PS C:\ucs > Get-UcsNetworkElement | Get-UcsFiModule-Id 1 | Get-UcsPortGroup-CF to Transport | Get-UcsFiFcPort | Select dn, nmdt, admintransport, adminstate, operspeed | Format-Table

  DN Nmdt AdminTransport AdminState OperSpeed

  --                                      ----                                    --------------                          ----------                              ---------

  sys/switch-A/slot-1/switch-CF/port-31 fabric/san/A/phys-slot-1-port-31 Canadian forces active 4 Gbps

  CF sys/switch-A/slot-1/switch-CF/port-32 fabric/san/A/phys-slot-1-port-32 active 4 Gbps

  sys/switch-B/slot-1/switch-CF/port-31 fabric/san/B/phys-slot-1-port-31 Canadian forces active 4 Gbps

  CF sys/switch-B/slot-1/switch-CF/port-32 fabric/san/B/phys-slot-1-port-32 active 4 Gbps

  If you weren't aware, there is a large command called get-ucscmdletmeta.  It will help to understand how things are defined in the XML of the UCS model.

  Here are some example uses:

  Get-UcsCmdletMeta-name ucsnetworkelement-tree

  (I removed the output as it was very long, but it will give you the entire hierarchy of all classes of sup that are children of the network element, the names of XML classes for each and it suitable PowerShell verbs and names for query and manipulate classes.)

  PS C:\ucs > Get-UcsCmdletMeta-name ucsfifcport

  ClassId: FcPIo

  Name: UcsFiFcPort

  Verb: get

  PipelineClassId: PortGroup {}

  LimitScopePipelineClassId: {}

  MoMeta: Cisco.Ucs.UcsMoMeta

  -This result displays the available cmdlets to get information about an FC Port.  You can see the PipelineClassID PortGroup watch, which means the classes / substantive PoSh that are pipelineable in this category

  PS C:\ucs > Get-UcsCmdletMeta-noun ucsfifcport | Select mometa - ExpandProperty

  ClassId: FcPIo

  XmlTag: fcPIo

  RN: port-[PortId]

  MinVersion: 1.0 (1e)

  Access: input-output

  ChildClassId: {EventInst, FaultInst, EquipmentXcvr, FcErrStats...}

  AccessPrivilege: {read only}

  PropertyMeta: {AdminState, AdminTransport, ChassisId, Dn...}

  -Here, you can see the metadata Object (MO) on the Port CF class.  You can see it was added in UCSM 1.0 (1e) and needs only the 'Read only' privilege to see.

  PS C:\ucs > Get-UcsCmdletMeta-noun ucsfifcport | Select mometa - ExpandProperty | Select propertymeta - ExpandProperty | FT - AutoSize

  Name XmlAttribute Type MinVersion access restriction

  -----------                      ----           ------------   ----            ----------    ------

  Cisco.Ucs.UcsPropertyRestriction AdminState adminState System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction AdminTransport adminTransport System.String 2.0(1m) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction ChassisId chassisId System.String 1.0 (1) ReadOnly

  DN dn System.String 1.0 Cisco.Ucs.UcsPropertyRestriction (1e) ReadOnly

  Encap encap System.String 1.0 Cisco.Ucs.UcsPropertyRestriction (1e) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction Nmdt Nmdt System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction IfRole ifRole System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction IfType ifType System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction Lc lc System.String 2.0(1m) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction LicGP licGP 1.4 (1i) of System.UInt64 ReadOnly

  Cisco.Ucs.UcsPropertyRestriction LicState licState System.String 1.4 (1i) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction settings regional locale System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction Mode mode System.String 1.0 (1) ReadOnly

  Model Cisco.Ucs.UcsPropertyRestriction model System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction name Name System.String 1.0 (1e) ReadWrite

  Cisco.Ucs.UcsPropertyRestriction OperSpeed operSpeed System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction OperState operState System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction PeerChassisId peerChassisId System.String 1.4 (1i) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction PeerDn peerDn System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction PeerPortId peerPortId System.UInt32 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction PeerSlotId peerSlotId System.UInt32 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction PortId portId System.UInt32 1.0 (1e) Naming

  Revision revision 1.0 System.String Cisco.Ucs.UcsPropertyRestriction (1e) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction Rn rn System.String 1.0 (1) ReadOnly

  Series Cisco.Ucs.UcsPropertyRestriction series System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction SlotId slotId System.UInt32 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction StateQual stateQual System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction status System.String 1.0 (1e) ReadWrite

  SwitchId switchId System.String 1.0 Cisco.Ucs.UcsPropertyRestriction (1e) ReadOnly

  Transport Cisco.Ucs.UcsPropertyRestriction Transport System.String [] 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction Ts ts System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction of type System.String 1.0 (1) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction UnifiedPort unifiedPort System.String 2.0(1m) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction UsrLbl usrLbl System.String 1.4 (1i) is ReadWrite

  Cisco.Ucs.UcsPropertyRestriction seller seller System.String 1.0 (1) ReadOnly

  Wwn wwn System.String 1.0 Cisco.Ucs.UcsPropertyRestriction (1e) ReadOnly

  Cisco.Ucs.UcsPropertyRestriction XcvrType xcvrType System.String 1.4 (1i) ReadOnly

  -In this example I show all the properties of the class Port FC.  As you can see that operspeed is the property, you are more concerned.

  Let me know if you have more questions!

  Thank you
  Eric

• Can you get a sata adapter and replace it with a PCI Express so I can install a graphics card in the caddy hd for my laptop. Y at - it means to get an internal or external graphics card?

  Hey!

  I know that you can remove a dvd cart and replace it with a HD you can get a sata adapter and change a PCI express so I can install a graphics card in the caddy hd for my laptop. y at - it means to get an internal or external graphics card? I do not have a slot express pci laptop because a laptop is relatively new.
  
  Original title: laptop computer graphics card
  other cool mods I can do for my laptop. I've already upgraded to ssd and ram and processor.

  Hello

  I do not know such an adapter exists, but it's a hardware problem - I suggest you contact the manufacturer of your laptop with this issue, as well as questions about additional upgrades, you could do.

  These are all the hardware problems, and this site deals with software issues related to the Windows operating system. I'm sorry this isn't the answer you're looking for, but...

  Let me know if this helps you.

  Kind regards

  BearPup

• Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Hi Dominic,

  I understand that you are unable to respond to this thread and created a new thread.

  As restart the print spooler does not solve the problem, please reinstall the printer and then check if that helps.

  Check out the following link to resolve the problem of iTunes.

  http://support.Apple.com/kb/HT3204

  Hope that the information provided is useful.

• With the help of LR4 with Windows 8 - impossible to get the images to desempilement.

  Using LR4 with Windows 8 - impossible to get the images to desempilement.

  Right click on the picture, select stacking, select Unstack

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M