Impossible to get a Multicam sequence of work since the update

Similar Questions

• Impossible to get Windows Vista Mail to work since the installation of FireFox

  In recent weeks, been unable to access the Internet or use any messaging service using IE8. Internet Explorer opens not - except in safe mode with network. I spent several hours to solve this problem without success. Then as a last resort, I downloaded and installed Firefox and in normal mode the page Firefox came and I have full access to the Internet and Microsoft Hotmail - however I can't get Windows Vista Mail to work.

  WMUtil is very easy to perform and can fix things.  Especially if you got rid of McAfee.  You may still need to remove your e-mail account and then add again, but it's also easy to do.

  Many people find Thunderbird much more preferable to alternatives to Microsoft.

  Steve

• Why do I get restore window when opening firefox since the update

  Why do I get restore window when opening firefox since the update. I don't want to restore but it appears every time instead of my homepage as shown

  A likely cause is that you first close all Firefox Windows and then close the Firefox application.

  Some noted that closing of Firefox (Firefox > Quit) while the browser window is always open works for them.

  • Bug 845681 - close all windows and abandonment of Firefox eventually led to about: sessionrestore to appear the next time you start

  (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

• HP: microsoft programs do not work since the update to windows 8.1

  Since the update to windows 8.1, I was unable to access any Microsoft programs that I downloaded from the Microsoft store. I can enter the store to download games but once they are downloaded, and I click on it to open they will be just sweep upward from the taskbar and then continue straight down to the bar once again for the tasks.  I can access Microsft Word, excel, powerpoint, etc that I have purchased and downloaded from the internet.  The games through Microsoft store does not work once uploaded any ideas on how to fix it?

  Thank you

  Hello

  Welcome to the HP forums

  You can follow this tutorial:
  http://www.eightforums.com/tutorials/20291-Windows-store-apps-Troubleshooter-fix-apps-Windows-8-a.html

  If troubleshooting doesn't fix your problem, click on the link given in the yellow zone finally & follow this tutorial for fixing AppStore does not.

  Concerning

  Visruth

• Impossible to get PRTSCR DEL + keys to work on the Satellite A100

  I have the Satellite A100 - 232 PSAA2E. Bought in Greece... If some of the keys have a second role - for Greek letters. Especially not a problem.

  However... I can't get led (top-right) to work and same (3buttons on the left led) the print. Is there a setting to change or is there another way to remove and print screen?

  Your ad is somewhat confusing. Satellite A100 is pretty old laptop so I do not understand how you have this problem now.

  Everything was ok in the past?

  As far as I know you can change the keyboard input language, but this has nothing to do with DEL or PRINT key features.

• Infinite scroll does not work since the update to version 35.0.1

  Since the last update to version 35.0.1, infinite scrolling (on Yahoo Answers in particular) has not worked. This seems to be a problem with Firefox, because it still work if I use the Internet Explorer browser. Some of my others preferring the settings been dirtied with during the automatic update (tabs and recorded history) I have to wonder if it is a real bug, or just a setting that has changed during the update. Whatever the reason, it is not a setting I changed, and it's frustrating. Help, please.

  Some sites like Google images automatically load additional content if you scroll the page.
  Note that extensions can also add such a feature on some websites.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Vibrate on alarm stopped working since the update

  I updated the software xperia last week. Monday, I woke up 10 minutes after that I had to set off for work. (just in time) I thought that I had rejected my alarm in my sleep. This morning, my alarm clock is not wake.me either.

  I had a mess around with it and basically, it is no longer of vibrates. (I put to vibrate only I'm up early)

  Vibrate seems to work very well in everything else. My phone is not in fashion or whatever it is energy saving. Is this a bug with the update of the software?

  Downloaded a fine works. Guess will just stick with that and try an android after the next updates

• Impossible to get Samsung SSD EVO to work on the Satellite L50-A0424

  I tried these last days to set up an EVO Samsung 500 GB SDD on my laptop, a Toshiba L50-A0424 and I can only call an exercise in frustration. First of all, the Samsung comes packed with a SATA cable USB cloning of the original hard drive is a pain. After cloning, the next problem is the Toshiba to accept DSS. Make me 2 errors: if I change the boot mode in the UEFI I get an error "check media prescence.

  If I change to the CSM, I get a PXE - MOF - exit Intel PXE ROM. am using the latest version of the BIOS, ver 1.9. It is; s been proposals to downgrade the BIOS to ver 1.2 but when even did not do this. Any ideas on what I can do? Feeling puzzled and irritated and really regret my decision to buy a Toshiba

  Sorry, but I must ask you this question: is recognized by the BIOS of SSD?
  Have you tried to install original recovery image on it?

  I ask this question because I use Samsung SSD on my laptop older satellite and it works without any problem.

• Impossible to get free 3D glasses to work on the Qosmio F750

  Hello

  I tried to make it work on my Qosmio F750 without success. whenever I try to not calibrate the 3D using the face recognition, theres no poping window until the recognition of face, am I missing any driver?

  Hello

  Can you please post exact model laptop number?

  Usually the X-Tune: software must be pre-installed on a Qosmio F750.
  This software allows you to calibrate the 3D effect.
  http://APS2.toshiba-tro.de/KB0/TSB1C038D0000R01.htm

  Please be sure that Super-d Driver IC (V1.0.1613.809 or later) has been installed
  All these software and drivers should be available on the Toshiba driver page.

• Impossible to get 64-bit Vista to work with the software

  Should go back to XP or trust windows 7?

  We cannot advise you what operating system to use as your software may not be Compatible with it or the other.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  32-bit and 64-bit Windows: frequently asked questions

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones in sleep mode no longer works since the update to v5.0.0.1036 & keyboard lock works differently

  Hi all

  Hope you are able to help me with my problem

  I updated my Blackberry Curve 8900 over the weekend to

  v5.0.0.1036(Platform 5.2.0.104) provider is Vodafone.de

  This update was offered when connecting my device to BlackBerry Desktop Application.

  After this update is completed successfully, I discovered the problem the upper top right (usually used for mute) button does not send my camera in standby mode more when you press more than 3 seconds.

  This feature worked perfectly before this update. Unfortunately, I didn't know what version I was before, but as I do updates on more than less regular basis, I guess it was available previously.

  With this problem, I discovered something that works as different as before.

  When I press on the locking of the keyboard (upper left top button) button the lock is now enabled directly and

  the screen goes black. Before this update took place the owner details appeared when pressing this button and the display dims after the set time turns off.

  The details of the owner are correctly added and appear when you go to properties-owner.

  I made a secure deletion (security options - remove security) unit and started from scratch twice already, but the problem remains the same.

  Is it possible to get at least the day before running again.

  I m using a case-mate case with built in battery I want to reboot my BB when no plug is available. Unfortunately, it doesn't have a magnet which send the device to sleep automatically when plugged in the case, so this manual standby option is important for me to

  extend the life of the battery.

  Forward to your response.

  Thanks in advance.

  Kind regards

  Agent of

  Of course, you can ask that... the most effective thing would be to go through your service provider for their support and to make this request. RIM/BlackBerry will listen to the questions and some of them (I think) much more than a user, that the carrier has more weight and shoot.

  I'll add that... This change in characteristics were made from last March, in ALL the operating systems for all devices... and has been included in all since. And then that there was much complaining about this function since then and during that period it have upgraded the OS in all areas, I don't think he'll change - in the next version for sure, or after. There's a reason any, they did this step in this direction.

  But the call of your carrier is the best way to make your voice heard, I think.

• Satellite A500-132 - FN key does not work since the update to Windows 7

  32-bit system, no driver I can find.

  What can I do?

  Thnx

  Yes. Install the Toshiba Value Added Package for Win7 for Satellite A350.
  I did it on my Satellite A500 and it works.

  One last thing: if I remember well there's also some flashcard support utility. The install too.

• TouchPad is not working since the update

  Hello

  I've updated the Touchpad of my Yoga 2 Pro with this: http://www.station-drivers.com/index.php/downloads/Drivers/Synaptics/Synaptics-TouchPad-Controller-f... and it no longer works.

  Do you have an idea how reset it?

  Thank you.

  Use the touchscreen to enter control Panal > Add and remove program > uninstall synaptic don't > restart.

• Direct e-mail does not work since the update of Windows

  I have a new computer with windows 7 and I am using windows live for my email. My windows updated yesterday and I have not been able to send or receive e-mail since.

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  You will find support for Windows Live Hotmail in these forums: http://windowslivehelp.com/forums.aspx?productid=1

  [Yes, the names are very confusing. [ WTF were thinking?]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Touch Pad Mac Book Pro does not work since the 10.11.3 update

  My touch pad does not work since the update of El Capitan 10.11.3, y at - it nothing to do with this update or is this a hardware problem?

  Mouse Magic Mouse and USB work correctly

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  If no success, make an appointment in an Apple store genius bar.  The assessment will be FREE.

  Ciao.