Impossible to get any movement in the monitor window during playback of a clip (PE10); preview image of the clip just shows a white screen. Passed through the analysis of the standard parameters, etc.

Similar Questions

• After having my system repaired, I can't have my mobile data card (wireless broadband modem) to operate. I can't get any service from the server.

  TBS wide BAND WIRELESS MODEM data

  I had to have my computer repaired, now I can't get my mobile card data (wireless broadband modem) to operate. I can't get any service from the server. I called them and they said that when the laptop has been repaired. The Ports were not tied and cannot open anything. All other elements of work of these ports (wirelsee mouse/printer and I explained this to the technician, it is only thought was to call in a repair service.) I think their answer is like the auto machnic said to go and change the air in your tires. Can you give me any advice?

  Hello

  I suggest you to stay in touch with your Internet service provider.

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• Impossible to get a substring of the current s URL page

  Hello
  
  I have a very strange problem with the URL returned by GSF. I seem to be impossible to get a substring of the URL - the String.substring (int, int) method does not appear to return the expected results. It seems that other methods of strings (such as the indexOf (String)) seem to be operating on the chain of substring returns a part, rather than on the chain saw when the url is printed in its entirety. The corresponding code is less to:
  
  -----
  AssetApiWraCoreFieldDao wraDao = new AssetApiWraCoreFieldDao (ics);
  String wrapperCurrPage = ics. GetProperty ("com.fatwire.gst.foundation.url.wrapathassembler.dispatcher", ServletRequest.properties ", true);
  
  WebReferenceableAsset wraCurrPage = wraDao.getWra (pageId);
  String theLongUrl = new String ((new WraUriBuilder (wraCurrPage, wrapperCurrPage)) .toURI (ics));
  
  This displays the correct URL (http://www.example.com/page)
  out.println ("FULLURL:" + theLongUrl.toString ());
  
  This displays the first 25 characters of a string of unknown characters (satellitescheme://SSURI/?)
  out.println ("substring:" + theLongUrl.toString () .substring (0.25));
  -----
  
  All help to work out what happening would be appreciated – as far as we can tell GSF (or maybe WCS) are originally String to behave in a non-standard way.

  Hi 950972,

  There is little of the magic that is you fool. Basically, if you change out.println () System.out.println () you will see TWO URLS begin with satellitescheme: / /. What is happening, this is the URL which are produced by the ISU Sites still are built with a satellitescheme://...#satellitefragment. Then, what is Server RHN Satellite will process the result and replace the strange chain with one that fits your URL assembler (and in this case, you use the GSF assembler).

  In your code of substring, you are breaking the special chain and are cutting the encoded URL. RHN Satellite Server does not see the prefix and the suffix combined, so it does not have to make the substitution.

  That's why Your ' e see what see Your ' e.

  A big question is however, why you try to process the URL generated by the API. I guess that sort of substitution will happen, but that should not be done. What you trying to do? I'm sure we can find the right way to achieve your goals.

  Kind regards
  Tony

• Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Hi Dominic,

  I understand that you are unable to respond to this thread and created a new thread.

  As restart the print spooler does not solve the problem, please reinstall the printer and then check if that helps.

  Check out the following link to resolve the problem of iTunes.

  http://support.Apple.com/kb/HT3204

  Hope that the information provided is useful.

• When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

  Russ

• Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen?

  Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen? Thank you!

  Not that I know of.

  You can always send a feature request: Final Cut Pro--> provide Final Cut Pro Feedback...

• When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  It could be the browser problem because the site is up and running, could you please try another browser.

  If same thing happening there so kindly go to Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release. ProDesignTools and download the desktop here CC application.

  Note: Please follow the instructions very Important, otherwise the download does not start.

  -Pierre

• Windows Update Web site crashes and restores, impossible to get any real updates (XP Pro)

  I recently had a collapse of the system that I was finally able to recover using the "Last known good Configuration" option, which seemed to take me only a few minutes after my initial installation of Windows XP.

  Everything is working smooth now, except for a few hiccups as a result of there being installed yet related programs Windows and trying to work I guess XP think should not be in the State they are currently.  I was hoping that through the Windows Update process causes XP then recognize my (updated) the current versions of Windows Media Player, etc., but there is a problem.  Assuming that my logic is good, that my version of Internet Explorer is not a XP expects to interact with.  I have IE 8.  To after my "Add/Remove Programs" list IE is not yet on my system.

  When I try to go to update.microsoft.com and proceed past the home page there are a lot of Flash and then clicking on and then brings back me to the same page with a small bubble in the tab bar that says "this tab has been recovered.  A problem with this webpage had to close and reopen Internet Explorer tab. »

  Any ideas on how I can get past this?

  Thank you!

  [The WinXP SP2 disc that came with your computer may be named System Recovery but it has nothing to do with the Windows system restore to not mix youself.]

  912812 predates the availability of both IE8 and IE7 so there is no way that IE8 is installed correctly. So if KB912812 was installed on March 13, 2010, the resumption of 'Last good' known Configuration you did (on or just before March 13, 2010) actually had a repair installation.

  Reference:

  How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed
     http://support.Microsoft.com/kb/917964

  Translation: Since (obviously) not uninstall you IE8 before you've done the repair facility, Windows and IE are now in a situation "confusing." This explains why IE8 is not listed in Add/Remove programs and why you are missing so many updates (including security for IE8 was last updated).

  Your only recourse now is to backup your personal data (which none should be considered 100% reliable at this stage) and then format the HARD drive and do a clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will not & cannot remedy!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Impossible to get any application that must be opened with .exe files

  original title: file extension exe

  Cannot get any application that must be opened with .exe files.  This includes all the games. Outlook Express, Microsoft Word and Excel.  Whenever I try to open one of these applications, the computer comes back with a list of available applications and said to ' choose the program the that you want to use to open this file.  None of the work programmes.

  http://www.dougknox.com/xp/tips/xp_easy_file.htm - Restore default associations of files easily
  http://www.dougknox.com/xp/file_assoc.htm - Doug Knox .lnk and .exe association fixes MS - MVP - Elephant Boy computers - Don ' t Panic!

• Unable to get any discussion on the Virus & Spyware forum.

  I don't know if I have a problem with this forum or what is wrong. I didn't get any new discussion forum "Virus & Spyware" on July 17. I read on the forum every day. Please advise for any suggestion.

  More and more,.

  Nothing is wrong with your system... it of quiet here... anyone post something again.

• Impossible to upgarde to Windows 8, impossible to get as it says the resources is not available

  Original title: info

  I have an older laptop running windows vista and am looking to move to the window of 7 or 8. I made an assist for 7 upgrade and was allowed to upgrade to windows 7 Home Edition, update tired help 8 and can't as it says the resources is not available. looking to see what are my options that I don't know where to find the online on microsoft Windows 7 download,

  Any assistance would be an incredible help.

  Thank you.

  Depends on your area just look at system builders channel

  There is no more upgrade to just clean the installation DVD

  http://www.Amazon.com/Windows-premium-System-Builder-packaging/DP/B00H09BB16

• Impossible to get good resolution on external monitor for laptop

  I am struggling with this situation of resolution of external monitor for the past two weeks. Since the research I did, it is a very common question; However, I did find a solution. I tried all the solutions have not been successful. I hope someone here can help you.

  Asus K50IJ laptop

  Win 7 Home Premium 64 - Bit SP1

  Intel Core2Duo T6600

  4 GB OF RAM

  Mobile Intel 4 Series Express Chipset Family

  Monitor is Samsung SC750_S24C750P connected with VGA cable (laptop doesn't have a HDMI output)

  I reinstalled the drivers for the graphics card; current driver is 8.15.10.2302 of 11/02/2011

  I reinstalled the drivers for the monitor; current driver is 1.0.0.0 11 13, 2012

  Monitor is currently appearing as "HDMI" in the Device Manager; I have chosen "Analogue" and had the same results. Now & then I see "Generic PnP monitor" in the Device Manager. whenever I see it I uninstall it.

  Bottom line is this: settings keep bouncing everywhere. On rare occasions, I saw the picture I want on the external monitor; When I close the lid on my computer (that's why I bought the external monitor - so I can get a bigger picture, not two), the resolution is 1024 x 768. When I disconnect the external monitor, I get the correct image and ratio 16:9 (1366 x 768) on my laptop screen. When I connect the external monitor I have two choices for the resolution: 800 x 600 or 1024 x 768.

  I went to the Intel graphics properties tool and set a resolution to 1920 x 1080 at 60 Hz - 32 bit - proposed by Samsung for their monitor. Result 7 choices of resolution, no '' recommended '' and the higher tag 1366 x 768. I can live with 1280 x 720; When I choose this resolution or anything higher, the laptop screen is superb, but the image on the external monitor covers 1/4 of the screen - the rest is black. Reset the external monitor doesn't change anything.  Computer restarting does not help. Monitor disconnect/reconnect does not help. I tried this routine dozens of times.

  I really need to use the external monitor, and I need the image proportional. Is there a way to do this?

  Separated from: http://answers.Microsoft.com/en-us/Windows/Forum/windows_7-hardware/cant-get-right-resolution-on-external-monitor-for/f3680ff9-684c-428E-a6ac-74fe4171a845

  Hi, thanks for the response.

  I saw this on the Intel Web site so I tried mode extended without change.

  If I had 1366 x 768 on both screens, I would have been delighted - instead, I had two choices on my external monitor: 4:3, covering the entire screen with a distorted image, or 16:9 which covers about 40% of the screen.

  The most likely explanation I can think of is that the external monitor 4:3, I used in the past has left a kind of preference file in my computer which could not be changed, so he kept coming back to 4:3 instead of 16:9. I thought the problem might be the VGA - VGA cable, but this does not explain why I was unable to cover the entire screen on my external monitor with something other than a distorted picture.

  Using the past because I was forced to buy a new laptop. As soon as I plugged on the external monitor, everything was perfect.

  Thanks again for your help.

• Any movement on the expired with JDBC thin, passwords reset?

  Most of the links for this is quite old and say you need an oracle client to be able to reset the expired passwords, due to the limitations of the JDBC driver.

  Were there no movement on this (or any prospect of any movement?)

  Not that I know well, although it would be a great add to our users.

• Impossible to get 13 elements to operate on Windows 10. get a notice of default, announcing that a reboot of the machine may be pending

  Hello. I am running windows 10. I bought elements 13 and cannot enforce. I receive a notice of default, announcing that a reboot of the machine may be waiting. It is recommended that you exit Setup, restart your machine and try new installation ' I did several times but can't seem to download. I pressed the "ignore" button, but it will not install. Help, please. Thanks in advance. David

  You get any installation message that failed after having clicked on "ignore"? Please check: troubleshooting installation | Adobe Photoshop elements & Adobe Premiere elements for Windows & troubleshooting installation problems with the log files. CS5, CS5.5, CS6.