Impossible to get 'Sync deleted messages' to work

Similar Questions

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?

• Impossible to get Windows Vista Mail to work since the installation of FireFox

  In recent weeks, been unable to access the Internet or use any messaging service using IE8. Internet Explorer opens not - except in safe mode with network. I spent several hours to solve this problem without success. Then as a last resort, I downloaded and installed Firefox and in normal mode the page Firefox came and I have full access to the Internet and Microsoft Hotmail - however I can't get Windows Vista Mail to work.

  WMUtil is very easy to perform and can fix things.  Especially if you got rid of McAfee.  You may still need to remove your e-mail account and then add again, but it's also easy to do.

  Many people find Thunderbird much more preferable to alternatives to Microsoft.

  Steve

• RV180 router: impossible to get Inter-VLAN routing to work.

  I've been hit in this now for two days and just can't get Inter-VLAN routing to work on this router.

  Here is the place is:.

  Updated to the latest firmware of Cisco (1.0.1.9).
  From default settings, I added 2 VLAN as follows:

  VLAN (id = 1) default: dhcpmode = port IP=192.168.1.1/24 from server 1
  VLAN vlan2 (id = 2): dhcpmode = port IP=192.168.2.1/24 from Server 2
  VLAN vlan3 (id = 3): dhcpmode = port IP=192.168.3.1/24 Server 3

  (without link)
  WAN port
  |
  Routing/NAT
  |
  --------------------------------------
  VLAN ip 192.168.1.1 192.168.2.1 192.168.3.1
  name of VLAN by default vlan2, vlan3
  VLAN id ID = 1 ID = 2 ID = 3
  Inter-VLAN only routing Yes Yes
  Excluded excluded unidentified 1 port
  2 excluded excluded Untagged port
  Port 3 unmarked excluded except
  Port 4 (not interest) without excluded tag excluded
  ---------      --------     --------
  1 2 3 Port port
  |              |            |
  AdminPC PC3 PC2
  192.168.2.191 192.168.3.181

  PC2 is assigned an IP address of 192.168.2.191 (DGW = 192.168.2.1) - OK
  PC3 is assigned an IP address of 192.168.3.181 (DGW = 192.168.3.1) - OK

  (IP 192.168.2.191) PC2 can ping 192.168.2.1 and 192.168.3.1 - OK
  (IP 192.168.3.181) PC3 can ping 192.168.3.1 and 192.168.2.1 - OK

  BUT...
  PC2 cannot ping PC3 - don't DO NOT WORK
  PC3 can not ping PC2 - don't DO NOT WORK

  (does not work in gateway and router Mode)

  CAN SOMEONE HELP ME UNDERSTAND WHY?

  Your help is very appreciated.

  I bought this unit specifically because she supported routing inter - VLAN!

  Vlaminck

  ---------------------------------------------------------------------------

  Support information:

  Screenshots:
  Belonging to a VLAN:
  VLAN ID Description Inter VLAN device Port 1 Port 2 Port 3 Port 4
  Routing Mgment
  1 default disabled enabled unmarked excluded excluded unlabeled
  2 active active VLAN2 excluded unmarked excluded excluded
  Unmarked 3 VLAN3 active active excluded excluded excluded

  Several subnets VLAN:
  VLAN ID IP address Subnet Mask DHCP DNS Proxy Mode status
  1 192.168.1.1 255.255.255.0 DHCP Server enabled
  2 192.168.2.1 255.255.255.0 DHCP Server enabled
  3 192.168.3.1 255.255.255.0 DHCP Server enabled

  Routing table (Bridge Mode)

  Destination Gateway Genmask Metric Ref use Interface Type flags
  127.0.0.1 127.0.0.1 255.255.255.255 1 0 0 static lo upward, gateway, host
  192.168.3.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg3 to the TOP
  192.168.2.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg2 upward
  192.168.1.0 0.0.0.0 255.255.255.0 0 0 0 static bdg1 to the TOP
  192.168.1.0 192.168.1.1 255.255.255.0 1 0 0 static bdg1 upward, gateway
  127.0.0.0 0.0.0.0 255.0.0.0 0 0 0 lo dynamic

  Routing table (router Mode)

  (Ditto)

  Hello

  It's not because the pings are allowed on the same subnet that they come from a different subnet.

  You probably have a firewall problem windows software because that by default, it removes a different subnet icmp echoes.

  Concerning

  Alain

  Remember messages useful rate.

• Qosmio G40 XP MCE - impossible to get an IR receiver to work.

  Hello.

  I have a G40 with XP MCE, but I can't get an IR receiver to work. I would like to use the remote control. You know which driver to use to make this work?

  Thank you

  I think its called the pilot consumer infrared (CIR).

• Impossible to get PRTSCR DEL + keys to work on the Satellite A100

  I have the Satellite A100 - 232 PSAA2E. Bought in Greece... If some of the keys have a second role - for Greek letters. Especially not a problem.

  However... I can't get led (top-right) to work and same (3buttons on the left led) the print. Is there a setting to change or is there another way to remove and print screen?

  Your ad is somewhat confusing. Satellite A100 is pretty old laptop so I do not understand how you have this problem now.

  Everything was ok in the past?

  As far as I know you can change the keyboard input language, but this has nothing to do with DEL or PRINT key features.

• Impossible to get a select statement to work

  Hi guys, I tried to get this select statement to work. But it won't be fair
  
  SELECT THE "GEN".
  WHEN'M ' THEN 'MALE '.
  WHEN 'F' THEN 'WOMAN '.
  END OTHER 'UNKNOWN '.
  THE EMPLOYEE
  
  That run, however, I just get unknown ranks.
  
  Summer racking me my brains on this simple thing for a half hour :(
  
  Thanks :)

  HC wrote:

  Otherwise, if I have not ' around GEN, then it says it's an invalid identifier.

  Who says table used has no column named gen. You use SQL * more? If so, publication:

  employee of ESCR

  This will give you a list of columns in the table. Make sure that gen is one of the columns.

  SY.

• Impossible to get a sound, message no Audio output device is installed, download message that some adapters do not work with error 31.

  Original title: get a message "No Audio output device is installed".

  Worked very much later than last night - pop up on the taskbar during the night - had earlier this week, but a reboot can fix this - now stuck - Machine is HP Pavilion dv2736us - I tried to reload the sound driver from the HP site - says NO Available MEDIA - device also device manager says 6TO4 and a bunch of other "adapters" works do not (Code 31) - is this a MS or HP problem? -Help appreciated - Tks - has

  Hello

  1 did you do changes on the computer before the show?

  2. What are the other devices for which you receive the error code 31?

  Addressing the issue with the sound:

  Method 1:

  See the site:

  Error in Vista: No Audio output device is installed

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01695430&cc=us&LC=en

  Deal with the issue with message on 6T 04:

  Method 2: Update the wireless drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 3: Install the latest drivers wireless

  You can get the latest driver wireless on the site:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3650837

  If the problem persists, I suggest you obtain help on the site of HP support forum: http://h30434.www3.hp.com/t5/Notebook-Computers/ct-p/Notebook

• Impossible to get sync files to work

  Hello

  I have a problem switching on file sync, which means that I have not been able to download anything on the market. When I select 'Enable File Sync' it just seems to think, then do nothing. Then when I go into the preferences, it says file synchronization is disabled. I do not see a file Adobe folder on my hard drive either by car. Help!

  For those who know these symptoms:

  • Adobe Creative Cloud is installed and running, but the files panel displays a generic ' welcome' screen.
  • If you haven't synced files before, you may be missing from the 'Creative Cloud Files' folder in your folder staff user.
  • If you have previously synchronized files, changes are not synchronized from the desktop to the cloud, or vice versa.

  Please, try the following:

  MAC

  1 leave the creative Cloud desktop application.

  2. in the Terminal, copy and paste this command:

  RM ~/Library/Application\ Support/Adobe/CoreSync/options.tix

  3. start the creative Cloud desktop application and start the synchronization.

  WINDOWS

  1 leave the creative Cloud desktop application.

  2. open the start menu, type "cmd" in the search box, and then enter to start a command prompt.

  3 copy and paste this command at the command prompt:

  del %APPDATA%\Adobe\CoreSync\options.tix

  4. start the creative Cloud desktop application and start the synchronization.

  Kind regards

  Ben

• Impossible to get Scanner Canon Lide to work in PSE 10

  I just belatedly upgraded to Snow Leopard... and got my PES 6 to run without freezing using a suggestion posted by Barbara B. ('Photoshop Elements for Snow Leopard') - removal of the Twain Adobe driver.  My Canon Lide 80 scanner always worked smoothly in PES 6 in Snow Leopard, but PSE 6 broke before removing Adobe plug-ins, Twain.  Given that I had not updated PES for a while, I decided to download the trial of 10 PSE and put it to the test before I bought.

  The first thing I did was move the driver ScanGear CS X 7.2 in the import module, as I did in previous versions of the EP.  The next thing I did was make sure you that Rosetta has been loaded on my operating system.  I think that with this new system, that Rosetta is used automatically without having to put a check in the box, as was the case in Leopard, because there is no box to check and the Apple care tech told me that he would go to the need.  When I boot 10 PSE, I get the message "one or more plug-ins is currently not available on your system...» ", States of system information that she was not able to load and ScanGear CS 7.2 X plug-in does not as a choice for inporting.

  This is a great scanner, so I am not disposed to landfill, PSE 6 work so bad comes to worse, but I would switch to PES 10.  I'm running on OS X 10.6.8.

  Does anyone have a solution?

  You must go to Applications > PES 10 > plugin optional are > ImportModules, and move the TWAIN of Plug-ins plugin > Modules to import before scanning with any scanner. However, if you need rosetta to scan, you will be able to scan in EPS, 8, 9 or 10, no matter that Rosetta is installed on your mac or not. There is no longer any support of Rosetta in PSE for PSE 8 is released. In this case, you can use Scan Gear or get a newer scanner, if there is no plugin intel native on the download page of canon for your model.

• Impossible to get Samsung SSD EVO to work on the Satellite L50-A0424

  I tried these last days to set up an EVO Samsung 500 GB SDD on my laptop, a Toshiba L50-A0424 and I can only call an exercise in frustration. First of all, the Samsung comes packed with a SATA cable USB cloning of the original hard drive is a pain. After cloning, the next problem is the Toshiba to accept DSS. Make me 2 errors: if I change the boot mode in the UEFI I get an error "check media prescence.

  If I change to the CSM, I get a PXE - MOF - exit Intel PXE ROM. am using the latest version of the BIOS, ver 1.9. It is; s been proposals to downgrade the BIOS to ver 1.2 but when even did not do this. Any ideas on what I can do? Feeling puzzled and irritated and really regret my decision to buy a Toshiba

  Sorry, but I must ask you this question: is recognized by the BIOS of SSD?
  Have you tried to install original recovery image on it?

  I ask this question because I use Samsung SSD on my laptop older satellite and it works without any problem.

• Satellite L500 - impossible to get a wireless modem to work

  Optus modem crashed computer and would be not recognized as being connected, wireless under tension and telstra said also there that modems are not compatible with windows 7. No one including toshiba seem to know blame the new windows 7, had computer 3 weeks and can not use it! someone help me please.so frustrating.thanks

  Post edited by: shanestar
  i'm sure there must be a compatible wireless modem and servers of the program to run that works.

  > Wireless under tension and also says telstra modems that are not compatible with windows 7.
  Sorry mate but I really don t understand your question
  The wireless network card that is installed on your laptop is fully compatible with Win 7 and the drivers are located on the Toshiba WLan portal.

  If you are talking about a 3rd party modem, then I must say that you are wrong here if you have problems with a device any 3rd party then you should get in touch with the manufacturer in your case with modem manufacturer

• Impossible to get updates of Windows to work and cannot install anything after upgrading to SP3

  After the upgrade to SP3 I met many problems. Any time I go to install it I get a Windows Installer error is not installed (even if this is the case) and I have to go to start/run and type Services.msc and the go to the installer of windows and right-click on it and select start and then install what I was tring to do.  Windows Update will not update and I tried to restart the installer and it does not work.  I tried the auto fixes but cannot get them to work because they will not install either or will not run.  I had to uninstall Windows Defender as I am unable to update the definitions it is basically useless.  All this started after I did a full cleaning of the computer and then downloaded the original Windows XP that I bought from Dell.

  Try this:

  http://www.ehow.com/how_7176381_microsoft-install-after-installing-SP3.html

  I hope this helps.

• Impossible to get Netflix instant spy to work

  I've been with Netflix for years. Have used quick watch since it was started.  Thursday, I got a screen black with error 2103 indicating there was a problem with Silverlight and unistalling and then reinstalilng usually solved the problem.  I did it.  Go to netflix and he encouraged and reinstalled Silverlight.  However, after installation, I had again the black screen and Error Message 2103.  I repeated the process about 3 times.  I checked with the TV downstairs and watch Netflix Instant has worked well.  My niece's laptop has no problems with Silverlight.  Now my office is 4 years and Windows XP.   I called Netflix Customer Service, they said everything was working well at their end and gave me a Microsoft Technical Support.  Technical support said I had to pay $59 for the support, which I disputed and the Rep gave me this website.  Also over the weekend, little friend of my sister downloaded Silverlight4 tools for Visual Studio 2010 and Microsoft Visual Studio 2010.  Yet, I can't Flash to work spy.

  SharonMV salvation,

  I looked for some light on this error and he brought me on the forum of Silverlight:

  http://forums.Silverlight.NET/t/194855.aspx

  hope this helps

  Eddie

• Impossible to get 1.3 MEM to work on esxi6

  Hello

  I have a hard time to MEM 1.3 to work on esxi6.

  I installed by the installation script and have dedicated 3 NETWORK card for my iSCSI configuration. the VIB MEM 1.3 is also installed.

  But if I run: ' setup.pl - query - server = x.x.x.x ".

  I get:

  You must provide the user name and password for the server.

  Enter the user name:
  Enter the password:
  No found Dell EqualLogic Multipathing Extension group.

  What could go wrong?

  Ah, now I understand the question. It would seem that maybe there is a bug in the setup.pl script - I'll inform the engineering. The output of the command esxcli indicates that the MEM is installed. You can check this creating a volume and display the default path strategy that has been attributed.

  If you continue to experience problems, please open a Support ticket and ask me to CC would have on the case.

  Thank you