Impossible to get 1.3 MEM to work on esxi6

Similar Questions

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?

• Qosmio G40 XP MCE - impossible to get an IR receiver to work.

  Hello.

  I have a G40 with XP MCE, but I can't get an IR receiver to work. I would like to use the remote control. You know which driver to use to make this work?

  Thank you

  I think its called the pilot consumer infrared (CIR).

• Impossible to get PRTSCR DEL + keys to work on the Satellite A100

  I have the Satellite A100 - 232 PSAA2E. Bought in Greece... If some of the keys have a second role - for Greek letters. Especially not a problem.

  However... I can't get led (top-right) to work and same (3buttons on the left led) the print. Is there a setting to change or is there another way to remove and print screen?

  Your ad is somewhat confusing. Satellite A100 is pretty old laptop so I do not understand how you have this problem now.

  Everything was ok in the past?

  As far as I know you can change the keyboard input language, but this has nothing to do with DEL or PRINT key features.

• Impossible to get Windows Vista Mail to work since the installation of FireFox

  In recent weeks, been unable to access the Internet or use any messaging service using IE8. Internet Explorer opens not - except in safe mode with network. I spent several hours to solve this problem without success. Then as a last resort, I downloaded and installed Firefox and in normal mode the page Firefox came and I have full access to the Internet and Microsoft Hotmail - however I can't get Windows Vista Mail to work.

  WMUtil is very easy to perform and can fix things.  Especially if you got rid of McAfee.  You may still need to remove your e-mail account and then add again, but it's also easy to do.

  Many people find Thunderbird much more preferable to alternatives to Microsoft.

  Steve

• RV180 router: impossible to get Inter-VLAN routing to work.

  I've been hit in this now for two days and just can't get Inter-VLAN routing to work on this router.

  Here is the place is:.

  Updated to the latest firmware of Cisco (1.0.1.9).
  From default settings, I added 2 VLAN as follows:

  VLAN (id = 1) default: dhcpmode = port IP=192.168.1.1/24 from server 1
  VLAN vlan2 (id = 2): dhcpmode = port IP=192.168.2.1/24 from Server 2
  VLAN vlan3 (id = 3): dhcpmode = port IP=192.168.3.1/24 Server 3

  (without link)
  WAN port
  |
  Routing/NAT
  |
  --------------------------------------
  VLAN ip 192.168.1.1 192.168.2.1 192.168.3.1
  name of VLAN by default vlan2, vlan3
  VLAN id ID = 1 ID = 2 ID = 3
  Inter-VLAN only routing Yes Yes
  Excluded excluded unidentified 1 port
  2 excluded excluded Untagged port
  Port 3 unmarked excluded except
  Port 4 (not interest) without excluded tag excluded
  ---------      --------     --------
  1 2 3 Port port
  |              |            |
  AdminPC PC3 PC2
  192.168.2.191 192.168.3.181

  PC2 is assigned an IP address of 192.168.2.191 (DGW = 192.168.2.1) - OK
  PC3 is assigned an IP address of 192.168.3.181 (DGW = 192.168.3.1) - OK

  (IP 192.168.2.191) PC2 can ping 192.168.2.1 and 192.168.3.1 - OK
  (IP 192.168.3.181) PC3 can ping 192.168.3.1 and 192.168.2.1 - OK

  BUT...
  PC2 cannot ping PC3 - don't DO NOT WORK
  PC3 can not ping PC2 - don't DO NOT WORK

  (does not work in gateway and router Mode)

  CAN SOMEONE HELP ME UNDERSTAND WHY?

  Your help is very appreciated.

  I bought this unit specifically because she supported routing inter - VLAN!

  Vlaminck

  ---------------------------------------------------------------------------

  Support information:

  Screenshots:
  Belonging to a VLAN:
  VLAN ID Description Inter VLAN device Port 1 Port 2 Port 3 Port 4
  Routing Mgment
  1 default disabled enabled unmarked excluded excluded unlabeled
  2 active active VLAN2 excluded unmarked excluded excluded
  Unmarked 3 VLAN3 active active excluded excluded excluded

  Several subnets VLAN:
  VLAN ID IP address Subnet Mask DHCP DNS Proxy Mode status
  1 192.168.1.1 255.255.255.0 DHCP Server enabled
  2 192.168.2.1 255.255.255.0 DHCP Server enabled
  3 192.168.3.1 255.255.255.0 DHCP Server enabled

  Routing table (Bridge Mode)

  Destination Gateway Genmask Metric Ref use Interface Type flags
  127.0.0.1 127.0.0.1 255.255.255.255 1 0 0 static lo upward, gateway, host
  192.168.3.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg3 to the TOP
  192.168.2.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg2 upward
  192.168.1.0 0.0.0.0 255.255.255.0 0 0 0 static bdg1 to the TOP
  192.168.1.0 192.168.1.1 255.255.255.0 1 0 0 static bdg1 upward, gateway
  127.0.0.0 0.0.0.0 255.0.0.0 0 0 0 lo dynamic

  Routing table (router Mode)

  (Ditto)

  Hello

  It's not because the pings are allowed on the same subnet that they come from a different subnet.

  You probably have a firewall problem windows software because that by default, it removes a different subnet icmp echoes.

  Concerning

  Alain

  Remember messages useful rate.

• Impossible to get a select statement to work

  Hi guys, I tried to get this select statement to work. But it won't be fair
  
  SELECT THE "GEN".
  WHEN'M ' THEN 'MALE '.
  WHEN 'F' THEN 'WOMAN '.
  END OTHER 'UNKNOWN '.
  THE EMPLOYEE
  
  That run, however, I just get unknown ranks.
  
  Summer racking me my brains on this simple thing for a half hour :(
  
  Thanks :)

  HC wrote:

  Otherwise, if I have not ' around GEN, then it says it's an invalid identifier.

  Who says table used has no column named gen. You use SQL * more? If so, publication:

  employee of ESCR

  This will give you a list of columns in the table. Make sure that gen is one of the columns.

  SY.

• Impossible to get Samsung SSD EVO to work on the Satellite L50-A0424

  I tried these last days to set up an EVO Samsung 500 GB SDD on my laptop, a Toshiba L50-A0424 and I can only call an exercise in frustration. First of all, the Samsung comes packed with a SATA cable USB cloning of the original hard drive is a pain. After cloning, the next problem is the Toshiba to accept DSS. Make me 2 errors: if I change the boot mode in the UEFI I get an error "check media prescence.

  If I change to the CSM, I get a PXE - MOF - exit Intel PXE ROM. am using the latest version of the BIOS, ver 1.9. It is; s been proposals to downgrade the BIOS to ver 1.2 but when even did not do this. Any ideas on what I can do? Feeling puzzled and irritated and really regret my decision to buy a Toshiba

  Sorry, but I must ask you this question: is recognized by the BIOS of SSD?
  Have you tried to install original recovery image on it?

  I ask this question because I use Samsung SSD on my laptop older satellite and it works without any problem.

• Satellite L500 - impossible to get a wireless modem to work

  Optus modem crashed computer and would be not recognized as being connected, wireless under tension and telstra said also there that modems are not compatible with windows 7. No one including toshiba seem to know blame the new windows 7, had computer 3 weeks and can not use it! someone help me please.so frustrating.thanks

  Post edited by: shanestar
  i'm sure there must be a compatible wireless modem and servers of the program to run that works.

  > Wireless under tension and also says telstra modems that are not compatible with windows 7.
  Sorry mate but I really don t understand your question
  The wireless network card that is installed on your laptop is fully compatible with Win 7 and the drivers are located on the Toshiba WLan portal.

  If you are talking about a 3rd party modem, then I must say that you are wrong here if you have problems with a device any 3rd party then you should get in touch with the manufacturer in your case with modem manufacturer

• Impossible to get updates of Windows to work and cannot install anything after upgrading to SP3

  After the upgrade to SP3 I met many problems. Any time I go to install it I get a Windows Installer error is not installed (even if this is the case) and I have to go to start/run and type Services.msc and the go to the installer of windows and right-click on it and select start and then install what I was tring to do.  Windows Update will not update and I tried to restart the installer and it does not work.  I tried the auto fixes but cannot get them to work because they will not install either or will not run.  I had to uninstall Windows Defender as I am unable to update the definitions it is basically useless.  All this started after I did a full cleaning of the computer and then downloaded the original Windows XP that I bought from Dell.

  Try this:

  http://www.ehow.com/how_7176381_microsoft-install-after-installing-SP3.html

  I hope this helps.

• Impossible to get together-QVWComputer - PersistentClient to work with 8.0 PS Module

  My code has worked on 7.2.1 but I can't make it work since upgrade to 8.0. I'm just trying to assign a user to a VDI, Set-QVWComputer is the only command that I'm having a problem with.

  The error I get is "the specified filter was invalid."

  Example of order:

  Game-QVWComputer-gites "Domain\UserName" (Get-QVWFarm) - PersistentClient-Identity 'VDIComputerName '.

  This "specified filter was not valid" resolved in 32 of the PowerShell 8.0 module version.

  The version that you are using must be greater than 8.0.306.32 - please ensure you are running a current version of the module.

• Impossible to get the grayscale setting to work in HP Photosmart C4780

  Everyone has understood how get setting to work when printing in grayscale? I am running Mac 10.7.4 and installed the latest drivers from HP, but is always color printing.

  Thanks in advance for your suggestions

  Steven

  Have you tried 'Ordinary paper, project fast, black and white' in the drop down presets?

• Impossible to get files MP4 video to work it is to say 10/11

  Here's my project file:

  Dropbox - videotest.cptx

  It consists of 1 slide with a test inside video and 1 blank slide - that's all!

  
  

  I use 8 Captivate (same results in 9 Captivate) and no matter what I do, in a trial through SCORM cloud, IE 10/11 everything simply do not load video content at all. It just shows the superposition of loading, then it goes, and then it returns - just cycles forever.

  I use the fix IE 9 and which seems to be working (start the video apres.5 seconds instead of the right at the beginning of the slide), but it does help to get the course work in IE 10/11 in anyway.

  I tested all imaginable MP4 H.264 file variations with no luck. Here are a few others that I have gone through:

  http://download.wavetlan.com/SVV/media/http/http-MP4.htm

  Hello

  Thank you for reporting the issue. I am part of the Adobe engineering team. We tried to reproduce your problem but were unable to. For your reference I share the link of scorm cloud that you can follow to see your project you can open preferences in Internet Explore 10/11 Cloud of SCORM.

  Please do not hesitate to share if your problem persists.

  Thank you

  Aditya Tiwari

• Impossible to get Scanner Canon Lide to work in PSE 10

  I just belatedly upgraded to Snow Leopard... and got my PES 6 to run without freezing using a suggestion posted by Barbara B. ('Photoshop Elements for Snow Leopard') - removal of the Twain Adobe driver.  My Canon Lide 80 scanner always worked smoothly in PES 6 in Snow Leopard, but PSE 6 broke before removing Adobe plug-ins, Twain.  Given that I had not updated PES for a while, I decided to download the trial of 10 PSE and put it to the test before I bought.

  The first thing I did was move the driver ScanGear CS X 7.2 in the import module, as I did in previous versions of the EP.  The next thing I did was make sure you that Rosetta has been loaded on my operating system.  I think that with this new system, that Rosetta is used automatically without having to put a check in the box, as was the case in Leopard, because there is no box to check and the Apple care tech told me that he would go to the need.  When I boot 10 PSE, I get the message "one or more plug-ins is currently not available on your system...» ", States of system information that she was not able to load and ScanGear CS 7.2 X plug-in does not as a choice for inporting.

  This is a great scanner, so I am not disposed to landfill, PSE 6 work so bad comes to worse, but I would switch to PES 10.  I'm running on OS X 10.6.8.

  Does anyone have a solution?

  You must go to Applications > PES 10 > plugin optional are > ImportModules, and move the TWAIN of Plug-ins plugin > Modules to import before scanning with any scanner. However, if you need rosetta to scan, you will be able to scan in EPS, 8, 9 or 10, no matter that Rosetta is installed on your mac or not. There is no longer any support of Rosetta in PSE for PSE 8 is released. In this case, you can use Scan Gear or get a newer scanner, if there is no plugin intel native on the download page of canon for your model.

• Impossible to get free 3D glasses to work on the Qosmio F750

  Hello

  I tried to make it work on my Qosmio F750 without success. whenever I try to not calibrate the 3D using the face recognition, theres no poping window until the recognition of face, am I missing any driver?

  Hello

  Can you please post exact model laptop number?

  Usually the X-Tune: software must be pre-installed on a Qosmio F750.
  This software allows you to calibrate the 3D effect.
  http://APS2.toshiba-tro.de/KB0/TSB1C038D0000R01.htm

  Please be sure that Super-d Driver IC (V1.0.1613.809 or later) has been installed
  All these software and drivers should be available on the Toshiba driver page.