Impossible to get the CF 9 Admin to connect to the IBM/DB2 server

Similar Questions

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• With the help of LR4 with Windows 8 - impossible to get the images to desempilement.

  Using LR4 with Windows 8 - impossible to get the images to desempilement.

  Right click on the picture, select stacking, select Unstack

• Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Nevermind, I finally got it to work, thanks!

• have 2 admin accounts and it is impossible to get the option to remove one of them

  I created for the administrator accounts and cannot get the option to remove one of them. I want to delete that won't give me the option to delete all it will let me do is change the password, it says it will allow me to change the picture, but when I try blank on the login screen is displayed. I can't change it even for standard user if I am logged in under the account of other admin. what I want to do is get rid of all my accounts and re-created them correctly like the one that I can't delete will sometimes pop up for password when I want to install something when I am connected with the other account.

  Is it possible to reset all our and start from scratch? I think it happened when I made some changed account policy local when I couldn't get a regular with my admin account setup program and now I don't know how to cancel it.

  I do not have to reinstall windows just to get this problem resolved... There must be an easier way.

  Thanks in advance

  Brenda

  For the guest account - I have a little poorly stated.  You * can * remove, but it is not recommended to perform this (possible to unintended consequences.)  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/deleting-guest-account/5a116d33-0056-47CA-B51A-b6615b90e160

  Administrator account - as far as I know you just cannot delete the built-in one.  Whichever one you can NOT remove - who is integrated. * smile *.

  Rename you accounts?  If not - it is one called "administrator."  Alternatively, you can use a registry setting to understand - but really the name should give it (if you have not renamed - and even if he did you rename... You renamed, you must know what you renamed to) the description of the account should be, "the computer or to the domain administrative account '...

  At the end of the day - you must remove only the accounts you know * you * created.  Ignore the rest.  Windows is/has been / will probably always be a multi-user even system when it is used by a single user.  He has accounts that are doing things in the background at almost any time.  Better than to let them be - unless you like instability.

  Whenever you install something (attempt to) as a normal user, it should appear and ask you an administrative level account - but you can select 'other' and put in ANY account of administrative level on this machine, you know the credentials. ;-)

• Impossible to get the specific features of cisco in LMS syslogs

  Hello

  It's about a problem that we face with our LMS 3.2.1. We cannot get specific cisco devices syslogs, while we are able to get the rest devices syslogs. one you suggest what would be the exact reason for this and the troubleshooting steps.

  Thanks in advance,

  Raja

  Hello

  The first thing I would say is to make sure that you have these devices configured to send the syslogs to that specific server. See config below:

  3725B - CR - NMS (config) #logging host?
  Host name or A.B.C.D IP address of the syslog server

  If that is already set up, please make sure that syslog messages are on the server. Create a message simple syslog and check the syslog.log file located in NMSROOT/CSCOpx/log to make sure it's written there. You can also run a capture of packages to confirm the foregoing. If you have this installed on Linux/Solaris, check the syslog_info file (/ var/log /).

  You can generate a test syslog as shown below:

  3725 B-CR-NEM #conf t
  Enter configuration commands, one per line.  End with CNTL/Z.
  3725B - CR - NMS (config) #exit
  B-CR-NMS 3725 #.
  * 03:35:42.613 13 Oct: % SYS-5-CONFIG_I: configured from console by admin on vty1 (192.168.10.197)

  NMSROOT is the LMS installation directory

  Let me know the results.

  Allen has.

• College Dorm Internet - impossible to get the printer connected wireless

  First of all, let me say that I have 3 OfficeJet Pro 8600.  The printer of love.

  Second, here is a part of the background of my situation:

  Bought OJP8600 for son go to College.  In the dormitory, it is wireless which is encrypted.

  WiFi@OSU is a front-end which feeds on the more robust secure portal, which leads to connect to osuwirless.

  Can easily get its HP Pavilion on the osuwireless network.  Name of user and password... no sweat (through the secure portal).

  But when I configured the printer... She grabs the WiFi@OSU router and he seems happy.  Problem is that computer of this son is on the osuwireless network.  When I try to select xxxwireless on the printer, I get an error of encryption or application not valid.  Duh.

  Then... I'm guessing that a network administrator will need to add the printer?

  I used a cable ethernet to connect to his laptop computer and that works.  Awkward, but works.  Suppose that I could also connect via USB, but also clumsy as it is to connect the wire whenever you want to print.

  Thanks for bearing with me... here's my questions:

  1. cannot get the HPDirect to work... maybe I don't understand what he does?  I can see the host name in internet connections, but can not get the phone to connect to anything mode other than "limited".

  2. a BlueTooth adapter would be an option?  I know that my 8600 didn't BT resident.

  Thanks for reading and your suggestions.

  M61

  Hello

  You try to open your printer can be used by everyone. The safest way is the use of USB cable.

  Kind regards.

• Impossible to get HP pro 8500 has to connect to the internet.

  How can I get HP pro 8500 has to connect to the internet.  When I go through when I go to the e hp Print cebter I see a yellow warning box indicating that my printer is not connected to the internet.

  Inernet connection has been established and shown on eprint center once the printer was turned off and then back on again.

• Impossible to get the upgrade to 2.3.2 to 3.2 to work

  A customer asked me to update their meter consumption for them and for me, it seems that the upgrade process does not at all.  I have made several attempts following the instructions in the documentation, and each ends with the same failure; Java Exception errors on the device of the user Web interface login.

  1. I have download the EGGS and make the basic configuration of the device, import of EGGS post I was just setting the password of the user Web interface and time zones.  I tried to connect and configure the basic customer information in the system, I also tried doing nothing and leave it alone.
  2. I opened on the 2.3.2 SSH source server running "service sshd start.
  3. On the destination machine 3.2, I run "importum 10.1.1.13 232" complete the order with errors, request never passwords as expected.  When you look at the message logs, I found that the connection between the destination server has been denied.   Try connecting manually, the SSH connection is denied.  During the migration attempt fails like this, the appliance will be unusable.  Just open the user Web interface product of Java Exception errors.

  I managed to solve the problem of connection by adding sshd: ALL the files hosts.allow, but that did not help my migration to complete.  When you run updateum, it now invites me as expected for the source root password.  It seems that it ends, and now the login page for the user interface will go up.  But when I login I get a Java Exception error message.

  Hello. Thanks for the detailed description of the problems. I believe that we can correct the problem.

  In Version 3.0, we started to encrypt the password for the mail Server Page manage (if one was supplied). This required a manual step to hide this password before the migration. We have neglected to mention this fact in the current migration instructions. I apologize for this error. You have two ways to proceed. I recommend the B method.

  Method A:

  1. delete the e-mail server on the 2.3.2 password system (Page manage), repeat migration, and then restore the password

  Method B:

  1. SSH to the system 3.2 (or open a vSphere client console)
  2. execute: stopping tomcat service
  3. run: sql (this is an alias for a command that will put you in an interactive shell to PostgreSQL)
  4. type: update 'EmailServer' set password = ";
  5. type: Ctrl + D (hold CTRL and press D). We must return to the Linux shell.
  6. run: service start tomcat
  7. Go to the page manage 3.2 webapp and give the password to the e-mail server in

  Please let me know what happens. Thank you.

  Post edited by: Dave Briccetti
  Noted that it was version 3.0 where the change was introduced. The error reported here affects only the migration of 2.3.2.

• Impossible to get the JPG files to open in ACR

  Hi all!

  I just reinstalled CS3 (and the 10.0.1 associate patches) on a new MacBook Pro and I can't get the JPG files to open in ACR.  I checked the checkbox is set to on screen preferences Camera Raw 'Always open files with settings using Camera Raw JPG', and my NEF files open in ACR very well, but will not open JPG files.  I have the same problem with TIFF files... I have the box ticked, but when I drop the files on the Photoshop icon, they right in CS3, not open cab.

  I can get him to open in ACR by choosing open..., by selecting the JPG file, and then change the format to "Camera Raw", but this does not work in my workflow with Lightroom.

  Has anyone seen this problem and know a fix?  It's a setting somewhere?  My old laptop is configured exactly the same (I think), but JPG files will open directly in ACR without problem.

  Thanks for any idea... appreciated!

  John

  For CS3, you have the right settings in ACR preferences, preferences of Photoshop and preferences of the Bridge .

• When you enter the user name and password in Windows Mail I get the following error: Server error: 0x800CCC90, error number: 0x800CCC92.

  Difficulties of username and password.

  In Windows Mail I suddenly wonder for the user name and password.  I fill them but receive no mail from mu.  I get the message:

  Account: 'pophost1.classicfm.net', server: 'pophost1.classicfm.net', Protocol: POP3, server response: '-ERR failed the connection. ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92.

  Please can you help me?

  Hello

  ·         Were there any changes to the computer, lately?

  Method 1:

  (a) start the Windows Messaging mail client.

  (b) click on 'Tools' from the main menu and choose "accounts".

  (c) a pop up will appear showing you all the email accounts in Windows Mail. Select the one that gives you the error and then click on the button 'Properties'.

  (d) another window pop up displays all parameters associated with this account.

  (e) under the "servers" tab check the 'e-mail username' and 'password'. One of them would certainly incorrect which translates the ID of Windows Mail error 0x800CCC92

  (f) to avoid having to enter the user name and password each time, check the box in front of "Remember password".

  (g) once you make the appropriate changes, click on the button 'apply' then 'OK'. Close the other pop-up window

  Method 2: Remove the existing from Windows mail email account and create a new one following the link provided below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

• Impossible to get the music from iTunes to iPhone

  Can't get music from iPad iPhone iTunes

  You cannot copy music directly from an iPad to an iPhone. If it's the iTunes purchases you can redownload it via the tab purchased in the iTunes Store on your phone. otherwise, sync music from your computer's iTunes library to the phone.

• Tecra A11 - impossible to get the FN keys to run on Win 7

  I had to do a fresh install of Windows 7 on my Tecra A11.

  Everything works fine but I find that I really really miss the ability to activate the trackpad turn off and turn on the wireless and turn off.

  I'm guessing that the only way to do it would be to reinstall this program that connects the FN key for the numbered function keys.

  I don't know what to call it so I don't know what to look for. I want to be careful and not to install more that I need.

  Y at - it program or how I can get this resettled function?

  Thank you

  Susan

  p.s. This forum very well, I found how to turn the touchpad off when a mouse is installed, but if I don't have a mouse attached and it's off, I'm in a mess :)

  Hello

  The FN keys are controlled by VAP (value added package) and the Support of Flash memory card utility.
  Install the VAP first and check if the FN keys work. If it will not work then you should also try the Flash Cards Support utility to get this FN buttons working.
  Flash memory card Support is located in Satellite L500 or other subsequent series

  Welcome them

• In Windows Movie Maker, problem: Change title, impossible to get the trim handle to drag and to extend the deadline.

  In Windows Movie Maker HELP "FOR THE DURATION of the CHANGE" 2. ' "says to" select title you want to change the duration. How to "choose" the title? The title as a RECOVERY when the arrow is hovering a square bubble appears showing the title and 6.7 seconds. No trim handles appear. A high blue and the low line components appear, but I don't know what that means because it is not graphic design help pages. I would like to extend the superposition of the title from 6.7 seconds to 36 seconds. Please give me some help you can. It's frustrating!

  Thank you

  Ginger B

  Hi Ginger B,.

  Windows operating system you are using?

  If you use Windows Vista, you can read the following article and check if it helps.

  Getting started with Windows Movie Maker

  Hope this information is useful.

• Impossible to get the recovery disc Vista for DV7-1020us notebook.

  I intend to install a new hard shore (750 GB) in my Pavilion DV &-1020us notebook. I use Vista 64 bit OS. Software does not offer me the possibility to make recovery disks. I can back up my files. The HP site says my computer does not recognize my serial number. I entered the serial number several times. The message I get is "HP is unable to find the desired page. To order Windows 8, a comprehensive program is of 90.00. The only CD that I have fallen on the Internet are to save the files. I appreaciate help on this.

  Hello

  You can order on the following site:

  http://www.computersurgeons.com/SearchProducts.aspx?SBT=dv7-1020US&BKM=results#results

  Kind regards.