Impossible to get the page edge animate loading first, any browser
Problem weird here, people. I have a web page created on board animate which works very well with "Preview in browser", but does NOT correctly load the time _first_, it is called from the Web site. It loads only partially (Firefox, Opera, Chrome, Safari) the first time a non-cached browser tries to load the page. However, after trying to load the page from that first time, if you go to any other Web site and then come back to my site to load the page, the page loads correctly. It kills me. I'm guessing that this behavior will be immediately recognized by someone who can tell me a solution.
To show this behavior:
1) go to the http://www.lightisrising.com
Loads a partial page (without animation in the upper left corner, bottom left, right, and lower right cells).
2) go to another website, such as Adobe.com
(3) back to www.lightisrising.com, and the page load and play the videos properly.
Of course, I need the page to load correctly the FIRST time someone visits it.
Thanks in advance for any help. Very much appreciated.
Hi, mbranco-
I tested your site and it looks like a simple reload will actually reach your videos to display. You use edgeHero to play videos? My best guess is that there is a race condition where the videos are not fully charged, and then edgeHero leaves the video on screen: No. Once they are cached, the videos loading prior to control, and they will be displayed. If you look at the files when they are unloaded in a web Inspector like Chrome or Firebug Inspector, CSS has display: none defined on the videos.
Thank you
-Elaine
Tags: Edge Animate
Similar Questions
-
When I launch mozilla or open a link in a new window I get the page you want to load but an additional page of the new tab opens with her. I tried to change my homepage to different things (new tab, firefox home, see the blank page) but I always get a new additional tab to open. How can I get only one page to open it?
Hello
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions and preferences.- Sites Web open is not recorded in less than 25 versions of Firefox.
To reset Firefox, perform the following steps:
For Firefox versions prior to 29,0:
- Go to Firefox > help > troubleshooting information.
- Click on the "Reset Firefox" line
button.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
For Firefox 29,0 and above:
- Click the menu button
click Help
and select troubleshooting information.
Now, should open a new tab containing your troubleshooting information.
- At the top right of the page, you should see a button that says "Reset Firefox"
. Click on it.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
-
Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?
clear your adobe.com cookies or use a different browser.
-
How can I get a plan if the page does not load?
Whenever I click on the link to find a plan for the purchase, the page does not load. I just want to buy a plan! And I can't! What should I do?
Hi Sara,.
In case you are still unable to purchase online, you can contact Adobe sales team to place the order.
800-585-0774.
Kind regards
Sheena
-
I'm on Win7 64 bit. Initially, I uninstalled because a program has changed my page of the new tab to something unwanted and I literally had no way to change this back. Now, every time I reinstall, I get the error "cannot load the profile, it may be missing or unreachable", and I can't create a new profile. Whenever I try to any method of opening the profile editor, I get the error 'Could not load profile' then too. I can't access the folder in/appdata/roaming/mozilla at all. It is said it is accessable and access is denied, and tries to remove it tells me I have not permission (even if I'm the admin). No other difficulty I saw worked. Can someone help, please?
I have done a virus scan, cleaned up one piece of adware, rebooted, and it worked all of a sudden. I don't know what exactly caused to start working, but he did, so I consider this issue closed.
-
Cannot connect to YouTube, the page will not load.
I use version 28.0 and I cleared my cache, cookies and history of the browser. I can watch a video on Youtube, if a direct link and sometimes access to the site itself, but I can't log on my YouTube account. When I click on login, the page tries to load until I finally exit out of it and give up. After this point, I can not access the real YouTube website. I am able to connect to any other site, I've tried, including Facebook and my Gmail. I have no problem with this in my torch/Google Chrome or Opera browsers.
I added Firefox on my programs that can both through Windows Firewall and have run Malwarebyte scans s, Windows Defender, and SuperAntiSpyware. What can I do to fix this? Y at - it a plugin that I missed resettlement, because I had to uninstall and reinstall Firefox from scratch recently, or is there something else I'm missing?
The problem seems to have resolved itself somehow. I didn't do something different after trying to solve this problem, far backward at the beginning and running a couple of analysis between the two then and now you can find the usual cookies of my sites which had been cleared when I complained about this problem in the first place. I really hope that it does not start again.
-
Hi everyone, this is my first post, also help on the post would be appreciated.
I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.
Thanks in advance
Newbie
The only way to install an ipad app is through the app store. PC or Mac software does not run on the ipad. Search in the contacts link at the bottom right of this page. Give apple a call.
I guess is the icon for pages in icloud for storing documents pages. At the same time, apple had a cloud based pages. Not sure what happened to her.
R
-
I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".
I tried to take different paths, as via the Control Panel, but it's the same thing.Operating system?
Try the following: -.
Open search Vista Start Menu Bar and type: RUN
Click OK
Type the following lines, and after each one, click OK: -.
regsvr32 jscript
regsvr32 vbscript
regsvr32 /i mshtml
No guarantee
TaurArian [MVP] 2005-2010 - Update Services
-
When I click to open windows update I see on the screen (the page failed to load)
When I click to open windows update I see on the screen (the page failed to load)
I'm trying the two just doesn't work
-
I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete. I did a full cleaning.Thank you
I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete. I did a full cleaning.Thank you
Hello
you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?
check the reports on the problems and solutions
You can do a support ticket, follow the link
http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support
Microsoft product support has some tools that will be useful and can help to find a solution
have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!
-
I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.
Discussions were merged.
Deleted duplicate.
Original title: failure of the Dll
The error seems to be a common problem with Dell laptops:
It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.
Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:
http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers
-
my systems page will not open error message "the page failed to load".
Original title: my systems page does not open after going into the control panel and then system and maintenance
my systems page opens not after going under maintenance then system and Control Panel. This shows simply "the page failed to load". I need to access this page to share files from one computer to the other. can anyone help?
Hi Sarah Brown,.
(1) remember you to make changes prior to this problem?
(2) what is the complete error message you receive?
Method 1: Run the fixit available in the link below and check if that makes a difference
Difficulty of broken desktop shortcuts and common system maintenance tasks
Note:
Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.
Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833 -
Get the error: "could not load wmi.dll.
I am trying to install Cyberlink 4. I get the error: "Could not load wmi.dll" before Setup is ready.
Even if it's in the System 32 folder.
I have a stable replacement for it, but I can't delete and replace it with obviously various reasons, even if many forums tell me to pretend like it was easy. I tried a lot of things now and with a lot of attention so not to spoil my OS.
I have Vista 32 Sp 2. I'm running out of ideas, in fact I ran.
Help gratefully received.
I solved this problem with a useful Gnome from Cyberlink.
Here is the link that made me to erase my previous bad uninstall the previous version of Cyberlink you Cam:
FTP://154: * email address is removed for life private ***/new/CLCleaner-YouCam-All.zip
When prompted, save the file to the desktop of the computer. After the download is complete, run the file and restart your computer.
Congratulations to all.
-
Can't get the page to print from Microsoft Visio. Also will not delete the queue.
Can't get the page to print from Microsoft Visio. Also will not delete the queue.
The problem arose when the USB printer to a laptop with Windows 7 on a desktop using Windows XP. The printer is a HP Deskjet D1660.
Hunting around, I found a solution that had been proposed for someone else's problem. The detachment is shown below.
Re: Update critical to correct a PC to printer communication problem, washer dot?
Options- Mark as new
- Bookmark
- Subscribe
- Subscribe to the RSS feed
- Highlight
- Report inappropriate content
-
After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.
Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.
http://support.Microsoft.com/kb/3161608
Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.
Best regards, VZ
Maybe you are looking for
-
How to install games on external hard drive applications
Hello people, I have my app game downloaded from the app store called rack 2 & I transferred to my USB key. Noting that the loading of the game takes too long, I decided to transfer it to my external hard drive. After the transfer of the application
-
v 10.0.2 update automatic does not
I've been running FF 10.0.2 for awhile and just told him a Web site that I have 14 FF or FF 15 clocked. I've always had the automatic update on, but obviously it does not work. I've now been 'check updates' on the channel of update, with no result af
-
e280v2: weird folder on my microSD card names
Hello, good people. I've had my e280v2 for about 1.5 years, and it generally works very well. Last Christmas I bought a 8 GB microSD for her, and most of the time things of wonder. I have however noticed that the ranking system is a bit wonky; music
-
P5LP - Incompatible with 1 GB card video and/or 2.1 PCI Express card?
I have an old m7480n I am upgrading the video card. I found and read many post on the problems of upgrade to 2.1 PCI Express card or current cards with 1 GB of memory. I need the answer to help me make the right choice of video card. Or just tell m
-
BlackBerry Smartphones my BB is to have error JVM 525
pls I got error codes on my tour 9630. then I solved it by reloading another OS on it, eventually, it worked perfectly. The next day the blackberry just start showing the JVM ERROR 525 with a white background. Anly phone shows white screen and the ma