Impossible to have full access to the guest account

Similar Questions

• Linksys e2000 - no popup comments on Wi - Fi access to the guest account password

  Hello

  I followed all the steps guide me on comments: comments connect password wireless

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=3b75609b0a90465db6229e7b2fb3942b_21449.XML&PID=96&...

  I have the password, it is set up and enabled but my main PC by using the Cisco Connect - parameters of access as a guest.

  The problem is on the laptop of comments I do not see the pop - maximum defined in

  Step 3: "once the guest access window appears, enter your guest password and click LOGIN."

  So I can't enter the password because I have nowhere to go.

  Step 3 goes on to say: "If the Guest access password window does not immediately invite, try opening a web browser and go to any website.  This will raise the window password guest access to appear."

  Tried also.  all I get is the IE error unable to connect.

  My network settings show a connection to the Linksys and bytes are fluid.

  But I do not see the password enter window.

  BTW: I plugged on the wire first and got on well.

  It won't work wireless.

  The use of Cisco Connect hell the guest account and power cycle the router.  Now go back and set up the account invited again and check.

• I have a problem with the guest account, defined as the administrator and other users as standard.

  Original title: "Guest account" is defined as an administrator and other users are standard. Unable to create new accounts or edit the ranks.

  Hello.
  I have a Dell INSPIRON 1545
  Windows 7 Home Premium

  Somehow my "guest" account that you can toggle is administrator.
  my other 'Ordinary' user is a standard user and I can't do the promotion.
  Because this "guest" account is Administrator I can't ' create new accounts / change accounts / disable comments / CMD refuse orders. "
  "I don't have the"windows drive"so there is no need to restore my windows / safe mode does not help either.

  I read a thousand threats and issues on this topic but nothing helped me.

  Help, please!

  to be honest I don't know if the administrator account is enabled.

  You have fallen into a popular trap, the trap of not plan and create an alternative emergency admin account, even if you have a spare emergency House key. It's now cause you a lot of grief. If the problem occurred recently, then you can resolve as follows:

  1. Use your repair Windows CD to start the machine in Repair Mode.
  2. Invoke the system restore to configure Windows to a point before the problem occurred.
  3. Plan in advance and create, test, and document this absolutely essential spare admin account.

  If this does not work then send me a note (pegasusDOTfnlATgmailDOTcom).

• How cancel my membership @CreativeCloud when I have more access to the email account under which it was established?

  I just spent an hour with support chat. And got nowhere I explained that my credit card had been charged for an annual fee, and I wanted to cancel my account and have a refund on my credit card. I also explained that I could access is no longer the original e-mail. And just when I thought we were making progress, the agent wrote, ' "I will be able to cancel the subscription without cancellation fees and not to initiate a refund for cancellation.". It was at the point of 45 minutes in our conversation, I finished on that date.

  Adobe customer service has reached a new low. Maybe I should sell my stock now...

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Kind regards

  Sheena

• How can I provide full access to my user accounts?

  Original title: multi-user

  I have 2 user accounts on my windows PC 8.1. How can I change things so that each account has full access to the files of othe'rs (documents, etc.)?

  Hello

  Thanks for posting your query on the Microsoft Community.

  Thank you for details on the issue and we are happy to help you.

  Connection to one of your user account (Administrator/Microsoft). Follow the steps to change the other user account to the administrator account:

  1. Right-click on the Start button and click Control Panel.
  2. Click on user accounts.
  3. Click Manage another account.
  4. Select and click the other user account in the user accounts list.
  5. Click change the account type.
  6. Check the mark on administrator and click Change the account Type .

  Now, we will have full access to your other accounts files and documents.

  Reference: Please refer to the following Microsoft article: What are user account control settings?

  http://Windows.Microsoft.com/en-in/Windows/what-are-user-account-control-settings#1TC=Windows-8

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  Thank you.

• If the pc is password protected and the guest account is turned off, a foreign body will have access to the machine or your pc? Help, please

  I want to protect my children from my pc because I don't want to access the net. So I would like to ask if my pc is protected from pw and the guest account is disabled is there another way that my child will be able to access my pc without my supervision?

  Hello

  Here is a very good explanation by Malkeleah and others in the linked Thread that explains that it is virtually impossible to stop a person access to your computer, if they really want.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/need-to-know-how-to-block-Ophcrack-from-running-my/2fe39573-7683-4a1a-A9D2-96764fce1335

  "(N'importe quel ordinateur exécutant un système d'exploitation est accessible par une personne avec 1) access physical;" (2) time; (3) jurisdiction; (4) tools. There are a few things you can do to make it a little more difficult but:

  1. define a password in the BIOS that must be entered before starting the operating system. Also to set the supervisor password in the BIOS so the BIOS configuration cannot be entered without it.

  2. starting at the BIOS, change the order of boot to hard drive first.

  3. set strong passwords on all accounts, including the built-in XP administrator account (it is disabled by default in Vista).

  4. If you leave your own account connected, use Windows key + L to lock the computer (or set the screen/power economy saver) when you step away from the computer and require a password to use.

  5. do the other accounts of users limited in XP Home, regular user accounts in XP Pro. All users must be on a Standard account in Vista with an administrator account used only for purposes of elevation.

  Please understand that these are technical answers to what is essentially a technical problem and there are ways around these precautions. It is a problem of family / interpersonal which cannot be solved by technical means.

  MS - MVP - Elephant Boy computers - don't panic! "

  And read other responses it mention password "Cracking" programs (which it's comments) which are available on Internet and other suggestions.

  See you soon.

• How to unlock the c: drive. I have only access to the folder users and subfolders.

  I have only access to the folder users and subfolders.  Everything I tried was "access denied."  I can't get to the root of c:.

  Hi, Scrivmark

  The default C: drive system is not intended to access directly by users and therefore users have restricted access to its root in the premeditated or premeditated damage prevention vital system files. If you are an administrator you can allow full access to your account to all or specific files on drive c (including a root folder) by editing its ' authorization of the lists by right-clicking on a file and choosing "Security."
  If you are not an administrator, you should ask another user whose account is Administrator (or equivalent) privileges to access the interesting files to your account.
  In both cases, you must understand damage system files, you can do.

  This suggestion is the intention that your computer is virus-free.

• How to have full access to Windows

  How to have all access to this window?
  When I bought it with the money, then it must be mine property, so! Why don't I have full access to all his files and all services?
  If this is possible (maybe I don't know on this subject) please please send me details if I change in the local policy or any other MSC...!

  Hi rahuldhiman, I have shared your question in a new conversation because she was not related to the previous topic.

  Already, you have full access to your computer, if you have configured your administrator account.  This means that you can access all files on the computer, even the files that belong to other users.  You can also change the passwords of other users and other administrative powers.  It's like 'root' on a unix system.

  Please note, however, that even administrators could occasionally see "access denied" messages. There are legitimate reasons for it. For example:

  1. Junction Points
     they look like folders, smells like records and even could be files in previous versions, but they are not really files.  For example, there is no folder named "Documents and Settings" on Windows 7.  The "Users" folder takes the place of it.  But for compatibility, a junction was created with the name "Documents and Settings".  So if you have enabled the display of hidden and protected from the operating system files, you may see this fake file. If you try to access it, you will get "access denied".  Not because you are limited, but because no folder actually exists.
  2. Safety and least privilege user / User Account Control
     It is dangerous to always have administrator privileges, because any virus or malicious software which can run (or you cheat in the race), would immediately have total control over your computer. Instant infection.  Which is not good, so your ability to modify the system files (such as C:\Windows\System32) is automatically reduced.  Yes, you can still "own" and "change security" so that you can edit these files (because you are the administrator, you can do anything), just because you CAN does not mean you LIKE it.  If you do so, your data and computer security would be at risk.

• After an automatic update, lastnight (13 December), has lost access to the internet through the guest account.

  Original title: Guest account Internet connection

  I am using an account on windows 7

  There has just been an automatic update, lastnight (13 December), and now I've lost access to internet through the guest account.

  I think that because of the update, the administrator must log or something, but I'm lost what to do. The internet worked for the guest before the update account and I do not have the administrator password. The administrator has not used the computer because I had an internet connection, as they went on vacation. I'm looking after their cats!

  Any help would be great.

  See you soon

  Tom

  Hi Tom,

  Thanks for posting in the Microsoft Community.

  Since you lost the internet connection after updating, you may need to update the NIC drivers to retrieve the connection. This is possible only if you have administrator privileges.

  For more information, see the article:

  What is a guest account?

  However, you can check if you can try the steps in the article to resolve the problem. If this isn't the case, you may need to wait for the administrator to return the party to the same difficulty.

  Wireless and wired network problems

  Hope this information helps.

  If you need further assistance, please answer and we will be happy to help you.

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• How to configure windows 7 pc to allow full access to the xp pc.

  original title: how to configure windows 7 pc to allow full access to the xp pc. Both PCs have been configured for full sharing

  How to configure windows 7 pc to allow full access to the xp pc. Both PCs have been configured for full sharing. Windows 7 pc has full access to the xp pc. However, on xp pc, all readers of windows FP7 can be seen, but access not authorized expect public folders.

  Any suggestions welcome

  Search in the sharing folder entries in a procedure step by step for the creation of a network of Ethernet cable of two computers between Windows 7 and Windows XP with ICS

  You will be able to share files in C:\Users but Windows 7 has special protection on the folder root the C:\ drive and others.

• messages when I go to add bitmogji get please enable full access on the key bitmoji Board is on full access, it's after I've downloaded is10

  When I go to add Bitmoji to iMessage I get please allow full access on the keyboard,

  It is configured to access complete this problem is after I download is 10

  This is a known problem, Bitmoji is working on a fix https://twitter.com/Bitmoji/status/775860193360044032

• How to give full access to the port to laptop

  Hello! I need help.
  I get data using xbee connected to the port of the laptop. The problem is with the increase of baud rate, time of receipt does not increase as it is.
  My instructor told me that your com port does not provide complete space to your software (LabVIEW). My question is how to give full access to the com port to LabVIEW? Kindly help...

  Here's my vi... I put the 115200.But baud rate in labview so I get the data and it intrigues, it traces precisely after 8 seconds. But I put the shipment time less than 8 seconds, it does not trace accurately.

• can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  Hello

  Enable or disable the guest account the
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-the-guest-account-on-or-off

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW