Impossible to install any device mass storage

Similar Questions

• Device Manager is showing "Other devices - Mass Storage Controller" as having no driver installed

  I noticed since I put Windows 7 on my laptop, the Device Manager is showing under 'Other devices' "mass storage controller" has no driver installed and has the famous yellow triangle and an exclamation point. I have a gateway MX6920, if this is of any help.

  Too bad.  I found the solution.

  In the case where you did not, go to:

  http://support.gateway.com/support/drivers/GetFile.asp?ID=21836&UID=290679

  Download driver, nav for cabins (location listed in the included readme file) folder, right-click the setup.exe and "compatibility test".  Go through the wizard and select the option "he worked directly with Windows XP SP2" and it should install with this compatibility.  My SD card reader just read my transflash Reader which contained my my Droid microSD card.  It's all good now.

• Windows 7 is installed, now missing "Mass storage controller" driver (Code 28)

  I installed Windows 7 (32 bit) and Bishop of device under the heading "Other devices" Windows could not find the device driver for the "mass storage controller".  My motherboard is an Asus P5AD2 - E Premium.

  Device type: other devices
  Manufacturer: unknown

  Location: Bus PCI 1, device 4, function 0

  After reading another similar thread, I clicked on properties, details and under Hardware lds, here are the values:

  PCI\VEN_1283 & DEV_8212 & SUBSYS_813A1043 & REV_13
  PCI\VEN_1283 & DEV_8212 & SUBSYS_813A1043
  PCI\VEN_1283 & DEV_8212 & CC_018000
  PCI\VEN_1283 & DEV_8212 & CC_0180

  Hope this info is helpful and now someone can help me solve this problem.

  Thank you

  Hi emender,

  It seems that there is no chipset driver for this motherboard for use with Windows 7.

  If you aren't able to find a working driver for the manufacturer, you may not be able to run this version of Windows on this material.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB device mass storage 10 - Cont error code

  Sorry, I don't know how to continue my previous question, so I paste below the previous question and Gerry's response:

  Thanks for the reply of Gerry. As Gerry susgested, I saved a copy of the information in the system from my computer on OneDrive: https://onedrive.live.com/redir?resid=726A7FEFBD5F1CD3! 106 & authkey =! AMZZ0M3BTwlvxx4 & ithint = the file % 2ctxt.  I do not know how to analyze it, so I need help. According to the information on my computer system information that I have provided, there can someone show me what to do to solve my problem?

  Concerning

  Leo MS

  My problem is:

  I do not have the new device connected to my computer, but there is a warning on the 'USB Mass Storage Device' Device Manager as USB controller. In fact no problem when I attached all my computer USB storage, it can still read file in there. This problem makes my computer need a lot of time to boot. Even if I disable your device (which has a warning about it) my computer need even more time to start. I tried all efforts:

  1. I tried to update the driver of the device, we want to, but it did not work.

  2. I uninstalled all USB controller devices, but it did not work.

  3. I tried 'MicrosoftFixit' tool, but it didn't work.

  Is it possible to fix this error? What happened to my computer? I need help.

  Best regards

  Leo MS

  It is Gerry's response

  To solve most computer problems, it allows to watch the evidence available in the system information file and Event Viewer logs. An experienced eye can choose needles in a haystack and see more clearly the precise nature of the problem or problems. Newspapers aren't necessary for your specific problem observer of events.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  I hope this helps.

  Gerry
  Stourport, England

  Enquire the execution Plan

  Hi Leo,

  Thanks for the reply.

  Since it is a duplicate thread, you can continue to solve the problem in your previous post and you can refer to this section of the faq for more information on how to post a reply in the thread.

  Community Microsoft frequently asked Questions

  http://answers.Microsoft.com/en-us/page/FAQ

  Hope this information helps.

• Impossible to install any application signed android release for a week

  Hello

  I got following error a week that Android build fail (see: Android 'tsa - ni - tsacert is provided' ):

  Caution:

  None - tsa or tsacert - is provided and this pot is not timestamped. Without timestamp, users may not be able to validate this pot after the expiry date of the certificate of the signer (09-02-2044) or any subsequent revocation date.

  Over application signing

  It seems no more and the app generates without errors (app_id = 1039892) since that time...

  But since then, the problem is that I'm unable to install on any device whether it's release signed! (unsigned / debug app will install very well!)

  It was working fine before with the exact same config.xml for like 2 months.

  As I am with the crosswalk project, I removed it, fearing she would have to do something with this... and yet, it will not install anywhere!

  Any help would be really appreciated here thank you.

  Looks like you want to adjust your versionCode android in your application. If you attempt to overwrite an application without incrementing the versionCode Android, it will fail. Add a versionCode Android, or uninstall the existing version before installing.

• IMPOSSIBLE TO INSTALL ANY OPERATING SYSTEM

  Hello

  I bought a computer hp laptop with this specification HP Pavilion g4-1310au Notebook PC about two weeks ago. It comes with a Freedos operating system. I tried to install an operating system from windows xp and also tried to install a windows 7, but every time I have to install the operating system, the installion was interrupted with a meassage to individuals a "blue screen" error error message saying that there are problems with my hard drive and I need to check on my hard drive. This scenario came when I tried to install windows xp on it. The next thing I did is that I tried to install windows 7 on the laptop computer. But still no luck, this time the error indicates that the installation cannot continue because there is a file missing or damaged file that prevents the installation.

  I also tried to set some settings in the BIOS of the laptop as the Boot Option to start start installation in the cd/dvd from the laptop drive.

  What seems to be the problem if I'm not able to install any operating system of your laptop? Is there a way or any special instructions for me to install the operating systems in this particular type and model of your laptop?

  Your help will be much appreciated if you could guide me to solve my problem with my laptop.

  Hello.
  
  Thank you for your patience and for all of the advice you gave me.
  After trying so hard to figrure that it seems to be the problem with my laptop
  why I can not install any operating system in it, I came across a software that makes the
  Tip for my problem. The software is called v1.4.6 RUFUS. I used it to make a
  USB bootable windows 7 and it worked.
  
  Finally, I realized that my laptop is fine but there is a problem with the process that
  I used to make a bootable usb key. After trying the software, everything went well and
  the installation of the operating system is a success.

• Lenovo A3500-HV, impossible to install any application after the upgrade to Android 4.4.2

  Yesterday, I warned that a new update is available for my A7-50 A3500-HV Lenovo tablet. I downloaded a 1.1 GB file and leave it to install the Tablet Android 4.4.2

  First of all, I found that I am not able to certain actions. For example, I'm not able to select checkboxes. Then a bigger problem appeared. Now I can not install any application and when I try to do, it is not possible to remove the button install. However Cancel button works correctly.

  How to solve this problem? There is another current patch?

  SOLVED!

  I had to reset to factory settings after upgrade. However, it was so painful, that I did it and just solved the problem.

• Impossible to install unknown device pls tell me what it is

  I installed win 7 ultimate 84 bit in my 4540 probook s and I first had 14 unknown devices! now, her stockings for all I know about this device is that ACPI/HPQ6000/3 & 33FD14CA & 0 code I got issues windows devices can someone pls help and put up a link to the driver en this device. Oh and by the way my wifi is down is - in any way related to this? pls help ASAP

  Here is a screenshot of my problem

  

  Thanks in advance

  Hello

  Download and install HP 3D DriveGuard 5 from the following link.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-110813-1

  Kind regards

  DP - K

• Impossible to install physx for Mass Effect 3. Error failed to initialize the physical system.

  Original title: fatal error install physx even after using the shortcut and adding / quiet to the target

  I tried to install physx to play Mass Effect 3. However a pop-up message and the installation has ended

  "Unable to initialize the physics system."
  "Please make sure you have a version installed PhysX system software update."
  After reading some posts online, I created a shortcut as
  C:\Users\USER\Desktop\PhysX-9.12.0613-SystemSoftware.msi/quiet
  Yet, nothing happened, the program file was not a folder named Nvidia, the games always says it cannot start because it is impossible to activate his physical flow...

  Hi Javier Wong,

  1 did you do changes on the computer before the show?

  Method 1:

  Put the computer to boot and then try to install the software.

  Step 1: Clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Step 2: Uninstall the earlier version of the software

   

  See the following site:

  Uninstall or change a program

  http://windows.microsoft.com/en-us/windows-vista/Uninstall-or-change-a-program.

   

  Step 3: Install the latest version of the software

  See the following site:

  NVIDIA PhysX System Software

  http://www.nvidia.com/object/physx-9.12.0613-driver.html.

   

  Method 2: Download and install the latest graphics Driver

  Install the latest graphics driver.

  You can consult the site mentioned below:

  NVIDIA driver downloads

  http://www.nvidia.com/Download/Scan.aspx?lang=en-us.

• Impossible to install the device driver

  Had to reinstall Windows 7 due to a malware.  All cleared up and works normally except for one thing: even if I reinstalled Windows using a DVD, my CD-ROM/DVD-ROM drive does not.  I troubleshoot-made the problem through "Devices and drivers" of the control panel.  He tried to reinstalled the driver but in vain.  Then I went into the Device Manager.  I found that the latest version of the software has been installed and received a message that Windows cannot start the device because the information of configuration (in the registry) is incomplete or damaged (code 19).  I uninstalled the driver, restarted the computer and tried to reinstall the driver.  Unsuccessful.  Any ideas?  Thank you.

  Here's the answer: http://answers.microsoft.com/en-us/windows/forum/windows_other-gaming/error-code-19-cddvd-rom-problem-please-help-and/d8dbbbe7-cf88-4d18-b4b4-c8851fe5736c

• Impossible to install any browser

  I am currently on OS X Mavericks 10.9.5

  Awhile back, I switched from Safari to opera because it was faster. But since a new update for Opera, it is laggy, and my laptop overheats. So I wanted to try other browsers, but I can't install everything! I can download them, but when I click on the icon to install it, I get this message (it says Firefox here, but it's the same message for any browser)

  

  Good he solved.

  For all those who struggle: http://www.tech-recipes.com/rx/45404/mac-downloaded-app-is-damaged-and-cant-be-o ¿animaux-error-resolved /

• Impossible to install any extension Safari

  I hit on my end to try to get the Chrome Safari. I am trying to install some extensions for Safari adblock, ghostery, trafficlight and lastpass.

  None of them install. I get an error message "Safari cannot install this extension."

  I tried:

  Turning off FileVault

  Keychain node deletion (it was not)

  Restart in safe mode and try to install

  After safe mode reboot and try to install

  Tried to install directly from developer without going through the extensions Gallery

  Remove all personal information in Safari

  Beyond the MacBook into a bar of genius, what else I can try?

  Using Safari/Safari Extensions to install?

  If the problem is still there, try to start safe mode using your account and see if they will be there install.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Why Search KB940157 4.0 will not work on Win XP SP3. In addition, impossible to install any update more.

  Research program in the original installation of Win XP SP3 caused the computer to freeze if the search engine has been expanded.   So I downloaded and installed Search 4.0.  It seems that works do not exactly the same.  IF I do not enlarge the window, it doesn't seem to work, but any change in the size of the window causes hang up immediately on the computer.  Must pull on the supply cord to recover.

  As for updates, here's a list updates failed, I tried to load onto my system through Windows Update:

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Saturday, June 30, 2012 Microsoft Update

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Saturday, June 30, 2012 Microsoft Update

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Sunday, January 8, 2012 Microsoft Update

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Sunday, January 8, 2012 Microsoft Update

  Windows XP security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352) updated Microsoft Sunday, January 8, 2012

  Windows XP security update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2657424) updated Microsoft Sunday, January 8, 2012

  Windows XP Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351) Sunday, January 8, 2012 update to Microsoft Windows XP

  Currently, the update process hangs up with 35 updates of uninstalled "high priority" pending, which apparently will install not until the (s) that failed is installed, if my machine seems totally non upgradable...!

  That seems to relate to programs of the .NET Framework.  Remove all would fix them this...?  What I would lose without .NET programs installed...?

  Hello

  What is the error message accurate/complete you receive the Windows Update issue?

  Depending on the issue with Windows search:

  Method 1:

   

  Step 1: Check in safe mode

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If you are able to see the start icon, then executes the method 2.

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2: Uninstall and reinstall Windows Search and check

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Follow the below mentioned methods for Windows Update:

  Method 1: To run the fixit for Windows update

  1. Please click the link below.

  http://support.Microsoft.com/kb/822798

  2. run the Fixit.

  Restart the computer and check it please for windows update

  Method 2:

   

  Problem could be with the .net framework is corrupt, so try to repair using link below.

  http://support.Microsoft.com/kb/976982

  Hope the above information is helpful.

• Impossible to install any program after downloading from the internet

  I have installed many types of Explorers (incl. IE, FF, Opera, Safari and Chrome). When I want to download a program on the internet, I do the usual. However, on all explorers when I try to run the program messages developed.
  FF: "example" program is not a valid Win32 Application.
  IE: I click Run but nothing happens
  Safari: It says that it cannot open the file because some parts have been moved since the download (even though I have not touched the file)

  I tried this without addons is not a problem to Add on.
  I use Vista Edition Home Premium and I really need help because I can not download any program!

  Thank you

  Hello

  Scanner of SFC and also an online virus scanner.

  SFC scan: http://support.microsoft.com/kb/936212

  Antivirus online scan: http://onecare.live.com/site/en-us/default.htm

  All the best!

• Impossible to install any software, system reboots.

  Vista Service Pack 1 does not allow me to install web software (ie itunes). The system reboots as soon as any software installation.

  iTunes is just one example of the attempted software.

  I don't have a solution for you, only of the troubleshooting suggestions:

  1. run a full scan. You might have a virus that prevents you from installing.
  Go to safe mode with networking Mode and install Malwarebytes. It is one of the best in the business.
  Here is the link:
  http://www.Malwarebytes.org/products/malwarebytes_free
  Select the FREE version.

  How to get in Mode safe mode with networking:
  Restart the computer > immediately and repeatedly hit the F key until you see a black and white scree. It's your window to safe mode > top/down, select Mode safe mode with network > enter > you are now in safe mode with network.

  2. If you receive a 'health check', do a check of the file system. It's to look for corrupt files. He will try to fix it if it is found.
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  3. do a check disk. He must search for bad sectors, etc. He will try to fix it if it is found.
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  PS a most appropriate forum for your question is performance and Maintenance forum:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Performance?tab=unanswered