Impossible to install KB2564958 for XP
I had a problem installing the update above, since 12 October.
Seems to be nothing wrong with my McAfee and nothine appears on Windows defender.
Seems to be much other f with the same problem, anyone find a solution?
Hi JohnDUL,
Follow these methods.
Method 1: Temporarily disable the security software.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Restart the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Method 4: Reset windows update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Tags: Windows
Similar Questions
-
Impossible to install SP3 for XP 64 bit don't keep saying updatebr.inf is invalid inf file
Impossible to install SP3 for XP 64 bit don't keep saying updatebr.inf is invalid inf file
There is no SP3 for Windows XP 64-bit.
-
Original title: fatal error install physx even after using the shortcut and adding / quiet to the target
I tried to install physx to play Mass Effect 3. However a pop-up message and the installation has ended
"Unable to initialize the physics system."
"Please make sure you have a version installed PhysX system software update."After reading some posts online, I created a shortcut as
C:\Users\USER\Desktop\PhysX-9.12.0613-SystemSoftware.msi/quiet
Yet, nothing happened, the program file was not a folder named Nvidia, the games always says it cannot start because it is impossible to activate his physical flow...Hi Javier Wong,
1 did you do changes on the computer before the show?
Method 1:
Put the computer to boot and then try to install the software.
Step 1: Clean boot
See the following site:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/kb/929135.
Note: to set the computer back to start normally, use the step 7 in the same link.
Step 2: Uninstall the earlier version of the software
See the following site:
Uninstall or change a program
http://windows.microsoft.com/en-us/windows-vista/Uninstall-or-change-a-program.
Step 3: Install the latest version of the software
See the following site:
NVIDIA PhysX System Software
http://www.nvidia.com/object/physx-9.12.0613-driver.html.
Method 2: Download and install the latest graphics Driver
Install the latest graphics driver.
You can consult the site mentioned below:
NVIDIA driver downloads
-
Impossible to install QuickTime for Windows 7 64 bit?
For some reason, I wasn't able to install the Quick Time plug-in on a 64-bit Windows 7 OS.
I noticed members comment on in the Apple forum, two years ago on this issue,.yet I did not come across a solution.If anyone has answers or a way around it I would be very happy.Thank you!Try to download from here.
-
Impossible to install updates for office 2003 - OxA95 error
If I can get and install every update, I can't install office 2003 updates.
I disabled my antivirus program, but there is no helkp.
Microsoft tried this problem, nothing...
The error code is OxA95, but I can't find anywhere on the net.
Hello
1. What is the number of KB (Knowledge Base) associated with the office 2003 updates?
2. were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below and see if it helps.
Hope this information helps.
-
Cannot install updates for Windows 7 SP1
Hello
I tried for awhile now to switch to Windows 10 without luck ( http://answers.microsoft.com/en-us/windows/forum/windows_10-win_upgrade/windows-7-key-not-recognized/9a66ab9a-819a-4285-9461-64e7528db222?tm=1450545430339&auth=1 ). In the end, I decided to reinstall Windows 7 RTM, install all updates and then upgrade to Windows 10.
Unfortunately, I seem to be impossible to install updates for Windows 7 now. Everything was going fine until Windows Update Agent 7.6.7600.320 installed. After a few mistakes, WU start looking for updates for hours. I've tried everything as suggested here without a bit of luck. In the end, I decided to leave it to search through the night and finally it does find and download updates about 300.
Installation of these updates takes about 4 hours and Windows restarted and tried to configure the new updates, restarted saying once again he could not configure the updates of Windows and it will undo the changes. And it's been like that for over an hour.
So as soon as now I can not even update Windows 7, not to mention the upgrade of Windows 10. Any ideas? I'm sick of the Windows updates, causing problems.
Installation sometimes loads of updates at a time can cause problems. When you access the list of the 300 updates Windows updates to odd day again, deselect all of them and then choose the oldest (for example) 50 and see if they install on their own.
Sometimes do fall off a long list of updates and try to install more small pieces may help them to install.
Is not sure, but its worth a try as a first shot.
(I know what you mean though issues of update.) It makes you wonder what's going on sometimes :-()
If this does not help, is there required failure account error codes?
-
I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?
Hello
Please, try the suggestions mentioned here and see if they help you:
http://www.thewindowsclub.com/failure-configuring-Windows-updates
Hope this helps, good luck :)
-
Impossible to install Photoshop Lightroom 6.0, because my PC is not a 64 bit system. Tried to download Photoshop Lightroom 5.71 but the code provided for 6.0 cannot be used. Faster ways to solve this problem?
Lightroom 5.7.1 is the latest version that is compatible on 32-bit computers.
LR 6 serial number will not work for LR 5.
Lightroom version 5 S/N is the separate serial number.
In this case, you will need to contact the Support from Adobe and to return the product if you do not buy 64-bit computer and see if you can buy 5 LR.
[Click on always need help (help), then select the Chat option]
-
Impossible to install some components for target RT
Hi all
I try to install the software in the target (your desktop) RT via MAX. However, the "NI Application Server Web 2.0" and "Web-based Configuration of NOR and monitoring 2.0" fail to be installed and the former one depends on it. ". I received this message:
"On the Web OR Configuration and monitoring 2.0.0 has core 1.0.6 WIF dependencies
"Based on the Web OR Configuration and monitoring 2.0.0 needs core WIF 5.0.0 dependencies.
So, what should I do? Any suggestions and help is welcome and appreciated.
Su
P.S. Now I'm not able to deploy a project of RT on target, only to be informed that "LabVIEW: unable to load nisysrpc.dll. In fact I can see the file on the host under the path "CProgram Files / National Instruments/RT Images/system NI API/5.0.0&5.1.0." It seems that the dll cannot be loaded into the target machine. I wonder if it has something to do with the above problem.
I think that your post is victim of a mistake to copy - paste, the message you posted is not possible.
Usually when customers run into situations where impossible to install version X of Y, it is often because they have several versions of LabVIEW RT installed on its host computer and try to install new components in older versions of LabVIEW Real-time. Can you take screenshots of your error dialog box, or a list of software installed (via a MAX report)?
-Danny
-
Hello
Original title: problem installing the softwareWhen my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box."the 16-bit MS-DOS subsystemThe msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »Grateful for any ideas on how to fix this problem!Hello
1. what 16-bit or software program you try to run? Should I use the CD Rom drive?
2 - is the question also appear during the installation of Windows updates?
3. have you made changes on the computer before this problem?
Follow the methods and check them out below:
Method 1: Perform a clean boot and check.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.Method 2:
Run an analysis of auditor of system files on your computer and check for the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Hope the above information is helpful.
-
Impossible to install the latest Flash 10.1 for Opera 10.53 player
Hi all
Having a weird problem installing Flash Player 10.1.53.64. Flash is installed partially, differently from previous versions.
OS: Windows XP SP 3 (32 bit)
Browser: Opera 10.53
old version of Flash player: 10.0.45.2I tried to update my Flash Player today because of safety issues. I did as I always do, by doing as follows, after the closure of course all browsers and instant etc. email clients:
1) download Flash uninstaller "uninstall_flash_player.exe" (md5: D049CF4ECD36EAC817D6D9025B470639) of http://kb2.adobe.com/cps/141/tn_14157.html?promoid=DNRTE and run it when logged in as an administrator. The uninstall program said uninstall has completed successfully. I manually checked that Flash files have been removed from c:\Program Files\Opera\program\plugins\ and c:\WINDOWS\system32\Macromed\Flash\ records.
2) download install Flash for browsers no - IE "install_flash_player.exe" (md5: 6E23EADBA1E84F43E5D28053A8BA27A9) of http://get.adobe.com/flashplayer/otherversions/ and run as admin. The installer says installation was successful. I checked the C:\WINDOWS\system32\Macromed\Flash\ file and found NPSWF32.dll manually and added FlashUtil10h_Plugin.exe there. Then, I checked the Opera plugin folder c:\Program Files\Opera\program\plugins\ only to discover there was no NPSWF32.dll it. Previous versions of Flash player always installed this file in the folder of the Opera plugin because otherwise it will not work.
(3) Opera began, went to the adobe.com Flash test page. It did not work. Flash is not installed, video Flash does not work and NPSWF32.dll does not appear in the list of the plugin of the opera.
In short: install Flash installs in the folder system32\Macromed, but not in the browser plugin folder. Any ideas? Is this a bug? Thanks for the helpYou can try manually to copy NPSWF32.dll to the Opera plugin folder and see if that solves the problem?
-
Impossible to install the operating system using the product on Satellite 1110 recovery CD
I had to replace my hard drive after the failure, but impossible to install Windows XP Home (Home) from the recovery CD. I followed the instructions on the CD case, but nothing happens, just a cursor flashing at the top left of the screen. If I try to install XP on a disk (which I just can't finish because it is already registered), then the installation begins as it should. A disc of windows 2000 installs also successfully.
I realize that it could be the drive itself, but it does not appear the disk is not bootable. I will be grateful for suggestions.
Simon
Hello Simon
Supplied restore CD is bootable. If I remember well, you should have 2 recovery (1/2 and 2/2) CD. It sounds stupid, but you can try to start the procedure of facilities using CD 2/2. A few months ago, I read a topic where a member of the forum has reported on the incorrect labelling of CD.
-
Impossible to install, Z710 power management win7 64
Impossible to install, Z710 power management win7 64 because "Windows cannot verify the Publisher of this driver software".
I pushed the 'install this driver anyway", but the material was not yet recognized after install/reboot.
So I installed instead the Lenovo Energy Management software worm 7.0.3.4
It works, but I don't know if this is a problem for my becouse of incompatibility with Z710 battery system.
Can you suggest a driver digitally signed for my Z710 or can I use the version 7.0.3.4 without problem?
Thank you
-
Impossible to install El Capitan Mediakit does not enough space on the device
Impossible to install El Capitan - dialog says:
MediaKit does not have enough space on the device for the requested operation. I have a 250 GB with 53,99 GB available HD. Has anyone else had this problem?
This procedure is a diagnostic test. It makes no changes to your data.
Please triple - click anywhere in the line below on this page to select:
{ diskutil list; echo; diskutil cs list; } | pbcopy
Copy the selected text in the Clipboard by pressing Control-C key combination.
Launch the Terminal application integrated in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.
Wait for a new line ending with a dollar sign ($) below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.
The Terminal window does not display the output. Please do not copy from there.
If any personal information appear in the output, anonymize before posting, but do not remove the context.
-
Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.
Assuming you meant WinXP SP3...
Why the SP3 was not installed for over a year?
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)? Who were these applications that run in the background when you tried to install WinXP SP3?
A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
-
I'm using mac os x version 10.7.4 and I try to update Firefox 3.5.5 version to the latest version. The Firefox icon in my doc still persists and leads me to the old version of Firefox. If it's supposed to happen?
-
Repeated resolved Firefox crash!
Site Web visited for the last 6 months, broke down several times a day, with apparently no correlation with the number of tabs, Firefox, Firefox version, etc. Some days, that Firefox would crash just a couple of times, but some days - like this morni
-
Ubuntu for Qosmio X 770 necessary drivers
Anyone know if there is no driver for the X 770 Ubuntu, for example to adjust the brightness of the screen, as with installed my screen runs a full backlight t which is a tad birght. Thank you Graeme
-
Satellite L300-1AQ unable to connect to the WLan
Hello I'm a novice at computers so any help would be grateful.My husband bought my laptop Toshiba L300-1AQ 5 days ago, I am trying to link up to my netgear router, when I look at my wireless network I can select my network as its signal strength exce
-
Spectrum of HP x 360 13-4100nn: dead touchscreen HP spectrum x 360 - early failure
Hello I recently bought a HP spectrum x 360 13-4100nn and after two days the touch screen stops working. I have tryied all of the recommended patches: -updates to drivers, BIOS, OS -Recovery system + factory reset (http://h20564.www2.hp.com/hpsc/doc/