Impossible to install Quicklbooks Pro 2014 on my windows vista computer

Similar Questions

• Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Hi asarabia

  Fatal error documents

  Restore the original factory configuration

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• I can't install most recent acrobat as my windows vista. What can I do?

  I can't install most recent acrobat as my windows vista. What can I do?

  Hi davidm78969556,

  With the new version, I think you are talking about Acrobat DC.

  Acrobat CC is not compatible with Windows Vista. Please check the system requirements before installing the software system requirements | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC.

  Kind regards

  Nicos

• Error code 646 when installing the automatic/important updates for Windows Vista (with Service Pack 2)

  Recently, I received 646 error code when you try to install the important/automatic updates to Windows Vista. What patches are there for this issue? What risks are there to do not overcome this problem?

  rivercitylady,
  Usually with the code 646 error, if you download the update and install it manually that will fix the problem.
  Go to the Microsoft Download Center and search for the number of the update has failed.  Download on your PC, then run it from there. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix - error 80073712 - windows component store is corrupt - after correctly installing the system update tool for windows vista.

  I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.

  I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.

  How can I fix the corrupted windows components store?

  Thank you

  Dan

  CMDC,
  If the SFC was not able to repair files then the best thing to do is to reinstall Windows.  You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool.  If there is still a problem with the SFC nto be able to complete then you should do a reinstall.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Do I need a firewall if I have installed the basics of microsoft with windows vista x 32 Security.

  Original title: am running Vista x 32

  Do I need a firewall if I have installed the basics of microsoft with windows vista x 32 Security. If I do how can I download the microsoft firewall?

  Your quick response would be appreciated
  Edwardini

  Windows Firewall is delivered with and is part of the Vista operating system.
  You already have it and, therefore, you do not need, or you, can download another Windows Firewall.

  Microsoft Security Essentials (MSE) will close your Windows Defender because MSE has its own advocate and performance 2 defenders in the same machine allows to create conflict, not to mention redundant.

• details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  does anyone know how to go beyond this error?

  Thank you.

  Moved from Vista to install, upgrade and activate Forum.

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-F964-4376-BFAB-2f29ea127c6a

• can I install virtual server 2005 R2 on windows vista family 32-bit

  Hello

  Please can you tell me if I can install virtual server 2005 R2 on windows vista 32-bit family, because I'm trying to do, but an error apears "virtual server not supported by windows vista" knowing I have install all IIS services

  Please give me a solution

  Thank you

  Hello Me force,

  I suggest posting your question on our TechNet forums located here:
  http://TechNet.Microsoft.com/en-us/virtualization/cc150661
  Thank you!

• How to install AutoCad Lite 98 on a Windows 7 computer?

  I used AutoCad LT98 and AutoCad LT2000 on Windows 98, 2000, ME and XP computers since 1998

  When I try to install it on this computer Windows 7, I get a message that it is not compatible.

  How to install AutoCad Lite 98 on a Windows 7 computer?

  * original title - program compatibility problem *.

  You did not mention which version of Windows 7, but if you have Professional or higher, you could try XP Mode:
    
   
  Download Windows XP Mode with Virtual PC
   http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
    
   
  Windows XP mode - installation and configuration
   http://www.SevenForums.com/tutorials/8247-Windows-XP-mode-install-Setup.html

  FYI: XP Mode running XP 32 - bit regardless of the bit-version of your host Windows 7 (32-bit or 64-bit).

• Impossible to install XP Pro on Satellite A200 - 25H

  Cannot install XP Pro the Satallite A200 - 25H
  During the F6 XP pro installation I use the drive USB floppy and drivers Intel 82801 HEM / HBM SATA AHCI, and he lets format me the drive NTFS.

  Then asks for Intel Matrix Storage Manager Driver. in the A: drive.
  The Bios doesn't allow me to disable SATA. In fact, the CMOS is very bare bones

  After that I tried using an XP - pro (with the included sata driver) slipstreamed installation CD, but the result was the same
  It asks me to insert (Intel Matrix Storage Manager Driver. in drive A :)

  For some strange reason not the USB floppy not even try to read the disc when you press return.

  Any help would be appreciated, since I am out of ideas

  Thank you

  Yes, I have a Council.
  In my opinion, you should use nLite (its free) software and you must include the SATA drivers for the new CD of XP with nLite.

  I did it last month and it was very easy. Everything worked perfectly!

  Google a bit for more information regarding the nLite

• Impossible to install intellitype pro 8.0

  Hi all

  I am currently not able to install the intellitype pro 8.0 software to use for a natural ergonomic keyboard 4000 MS v. 1.0.

  When I try to run the installation file, ITPx86_1033_8.0.225.0, which is the one for Vista 32 bit I downloaded today, I get this error from the installer:

  ---------------------------
  Setup of Microsoft IntelliType Pro 8.0
  ---------------------------
  The facility must close because an error occurred. Check that your computer meets the system requirements on the packaging of the product. Restart your computer and try running the installer again. If this error occurs again, see Help on the customer support options. (Error code 1603)
  ---------------------------
  Ok
  ---------------------------

  I rebooted and tried again and the same thing happens. The keyboard uses a usb port and is usable, but special keys do not work. If I plug it into a different usb port, Vista tries to find a driver, and the keyboard is unusable at this point. I tried to disable the antivirus without result.

  There is a file with the Setup file reading, and it does not list the potential problems of error in installation, but I can't seem to do the suggested corrections. Also, the error doesn't seem to be the same.

  It is said:

  When you install the software, you will get the "Unable to install a required component" message

  When you install the IntelliType Pro software, you may receive a message saying that Setup could not install a required component. If Setup fails to install the following components, follow the relevant instructions:

  • MSXML. On the installation CD, go to the Prereq\MSXML folder, open the folder for your processor (32-bit or 64-bit) type and then run the MSI file.
  • The MSXML update patch. On the installation CD, go to the Prereq\MSXML folder, open the folder for your processor (32-bit or 64-bit) type and then run the EXE file.
  • Windows Application Error Reporting. On the installation CD, go to the Prereq\Watson folder, open the folder for your processor (32-bit or 64-bit) type and then run the MSI file.
  • Windows install. On the installation CD, go to the Prereq\WindowsInstaller3.1v2\x86 folder, and then run the EXE file.

  If you still receive an error, you may have a problem with the component itself that you must resolve before you can install the software for your device. For more information, seehttp://support.microsoft.com .

  Any of the listed here seem to apply to what I saw the hand.

  Oh, I don't have the original CD, I thought (wrongly) I could just download the updated software if I needed to.

  Any ideas?

  Hello

  Means that the error 1603 ERROR_INSTALL_FAILURE.

  Step 1: update MSXML can also be downloaded via windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  So I suggest to update your computer via windows update, then reinstall the drivers.

  Step 2: To remove and then reinstall the drivers, follow these steps:

  (a) disconnect the device from the computer.

  (b) cut the power to the device, if the device has a separate power supply.

  (c) open Device Manager. To do this, use one of the following methods:

  (d) click Start, type of aircraft in the area start search and then click on Device Manager in the list programs. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (e) double-click keyboard, right-click on the keyboard you are using, and then click on uninstall.

  Note: If your device is not listed, it means that the device was removed automatically when you disconnected the device. Go to the next step.

  (f) restart the computer.

  (g) first, turn on the device, if you have to and then connect the device to the computer. Your computer detects the device and then reinstall the drivers for the device.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to install any program because not supported under Vista, but my PC is Windows 7 Pro 64-bit

  I try to install Rockwell Automation Studio 5000, but I get an error message saying "Studio 5000 is not supported on Windows Visa without Service Pack 1 or higher". However my PC is under Windows 7 Pro (64 bit) and Vista that is covered by the requirements of this program.

  Any ideas?

  What is the version number of Studio 5000 you have?

  You can try to install using the "compatibility mode".

  What is program compatibility?
  Program compatibility is a mode in Windows that allows you to run programs written
  for earlier versions of Windows. Most programs written for Windows Vista are also running Windows 7,
  but some older programs might run poorly or not at all.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Compatibility mode - make sure to run older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Windows 7 Compatibility Center
  See if your software or hardware is listed and what options you have

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Learn how to use the Mode of Windows 7 compatibility with legacy applications

  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  J W Stuart: http://www.pagestart.com

• Impossible to install Acrobat Pro XI on Mac

  Hello, I've recently upgraded from Acrobat Pro 9 to XI (Mac version) and failed to install.

  When I first installed Acrobat Pro version 9, I was running an earlier version of Mac OS X (I think it's Snow Leopard), but since then have updated my OS periodically and now spin El Capitan 10.11.5. Recently, I bought a license for Acrobat Pro XI and been affected by errors. Before attempting installation, I uninstalled my machine using the uninstall program Adobe version 9.

  After the first failure, I found I was able to launch Acrobat Pro, but not all the features worked.

  I have ran the Adobe Unistaller, rebooted, tried installing again, had the same fault message and once again found I could launch Acrobat Pro, but did not have all the features

  Yet once, I ran Adobe Unistaller, rebooted, this time in the recovery Partition where I ran disk utility and performed first aid on Macintosh HD, as well as on the physical disk. I can't say that that first aid is no. In earlier versions of Mac OS X, disk utility included functions such as the Partition of repair, repair disk permissions, etc., but now all these functions are missing and replaced with a single function called first aid.

  After that, I rebooted into OS X, again ran the installer, once again got an installation message failed.

  What can I do now? Is there that a saved Setup log file somewhere that I can read and publish? Is there any other information that I can provide to shoot evil?

  My computer is a MacBook Pro 13 "mid-2009 with 8 GB of RAM.

  Hi davidb66287241,

  I apologize for the inconvenience caused to you.

  You can try to install Acrobat using root user, visit this user account activation link root Mac: activation and using the user 'root' on OS X - Apple support

  Also, try to delete this file: /Library/Preferences/com.adobe.PDFAdminSettings.plist and try to install Acrobat XI as a root user.

  Let me know the results.

  Thank you

  Shivam

• Impossible to install Acrobat Pro XI on Windows 10

  I have difficult to install Adobe Acrobat Pro XI. During the installation, a window flashed and disappeared. I can't say what about the window flashed after selection of the English language.  Adobe Pro XI supports on Windows 10, see the link:

  ucts.html https://helpx.adobe.com/x-productkb/Policy-Pricing/System-Requirements-Acrobat-Family-prod

  
  

  Can anyone help?

  
  

  
  

  Hi ACANOE,

  Uninstall Acrobat XI using the cleaning, created a new user account with admin right, install Acrobat XI & check if it works.

  Kind regards

  Nicos