Impossible to install the driver Windows 7 for my Canon MF4150 USB printer and scanner-worked in XP

Similar Questions

• Impossible to install the driver Windows XP SP3

  Hi I'm Julviano,

  I have a problem with the driver installation for windows xp sp 3

  I use toshiba satellite c640, in fact, it's already a windows 7 installed on this machine, but because of my program companies is not supported in windows 7, I reinstalled Windows xp sp3 and I download the driver for windows xp in toshiba Web site

  But when I try to installed the driver it say "this computer does not meet the minimum requirements for installing the software.
  I don't know that I have download the right driver

  a driver who can not be installed:
  Intel chipset
  Driver VGA
  Wireless driver
  LAN driver

  can someone help me please?

  Concerning

  (1) I don't know where you downloaded the drivers mentioned?

  (2) this system initially took charge of operating system windows 7 from

  (3) I checked the correct site here

  http://Toshiba-Asia.com/SG/support/drivers

  (4) there is a way, you can run compatible programs in windows 7, windows xp in

  install windows xp mode in windows 7 Professional, ultimate or enterprise only

  (5) before installing read this article here

  http://Windows.Microsoft.com/en-in/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  (6) you can download windows xp mode or virtual pc here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8002

  (7) you can download windows virtual pc here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=3702

  Guilbert

• Satellite M30-S309: impossible to install the driver of modem for Win XP SP2

  Hi all
  I installed WinXP SP2 and after that, I can not install my modem driver?

  What is the problem?
  Is there a new driver for WinXP SP2

  Best regards

  Hello

  Do you have an error message or strange notification messages?
  It would be useful to know this.

  Bu the way: Please take a look at the driver Toshiba Europe page. There you should find a PDF of information update Microsoft Windows XP SP2. Some applications need to be updated after installation of SP2.

  I think it should help!

• Canon BJC-50 printer and scanner work with Windows 7?

  I have a printer Canon BJC-50 with the cartridge scanner.  I ordered a USB to parallel cable adapter must be able to connect to my laptop, because I do not have a parallel port.  The Windows 7 compatibility page says that this printer is compatible with Windows 7.  Canon said that it is not.

  Has anyone successfully connected and used a Canon BJC-50 with Windows 7?  If so, were there any problems?

  HI - same issue with Canon BJC-80. Says Windows is compatible and Cannon did not write! My BJC-80 prints OK with a USB/parallel cable and install via Windows 7 OK - but printer response time is in minutes to hit a comand "Print" in any program, for example. MS Word 2010?

  Suppose that we are victims of the creep of technology and need to buy a new printer - shame I have heaps of cartridges left!

• I can't install the driver that came with my TV/FM USB box because it is a 32-bit driver. My OS is Windows 7 64 bit. Please how to install this driver?

  I can't install the driver that came with my TV/FM USB box because it is a 32-bit driver. My OS is Windows 7 64 bit. Please how to install this driver?

  You should go to the 'box' TV manufacturer support website and download and install a 64-bit driver.

  The 32-bit driver will not be installed in a 64-bit system.

  What is the model of TV 'box '?

• My CS 4 has ceased to recognize the file Raw CR2 for my Canon 5 d MkII and G12?

  My CS 4 has ceased to recognize the file Raw CR2 for my Canon 5 d MkII and G12?

  Run the Creative Suite cleanup tool, reinstall. However, according to the tables below, your G12 files should not be readable in CS4 at all.

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  Mylenium

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!

• HP M477fdn printers have been impossible to install the driver for some users. We receive the error message following '0 x 00000006 '.

  have been unable to install the driver for some users. We do not receive the following error message.

  Error: 0 x 00000006

  Hi Sameer,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I would like to know some information.

  1. You are connected to a domain network?

  2. When exactly do you get this error code?

  3. Do you also have any error message?

  This problem may occur if the print spooler service is stopped.

  To start the spooler service, follow these steps:

  1. click on Startand then click Control Panel.

  2. double-click Administrative Toolsand then click Services.

  3. double-click on the Printer Spooler service and then change the startup type to Automatic. This option sets the spooler service starts automatically when you restart the computer.

  4. If you want to start the spooler service immediately, click Start in the area of The State of the Service .

  I would also refer to the Microsoft Help Article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Impossible to install the update of security for Windows XP (KB2476490) get error Code: 0 x 80070008

  Help!  I have Windows XP Edition version 2002 SP3 family.  I tried to install the update of security for weeks and get the following message:

  Cannot install get a security update for Windows XP (KB2476490) error Code: 0 x 80070008.   It is said it is downloaded on my PC but have been unable to find it or fix it.  Any help would be really appreciated.

  Unable to upgrade operating system at this time... no money.     Thank you!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/836941

  Hope this information is useful.

• Impossible to install the driver OR DAQmx on Win7 x 64

  I'm running Windows 7 x 64 and try to install the driver OR DAQmx 9.0.2.  However, the first time I did it, I got a partial installation.  Subsequent attempts to re - install give me the message that I need to first uninstall.  However, the program is not listed in install/uninstall programs.  I tried to run the cleaning for Vista, but it tells me that I have x 64 Windows so it does nothing.  So I'm stuck now impossible to uninstall what remaining NOR-DAQmx stuff is on my PC and cannot install again.  If you have advice on what to do, let me know.

  Thank you.

  Hey ness.

  Try to use MSI Blast to walk through the steps described in the pdf document.  Hope this helps!

• Printer HP 1120C range is listed as compatible with Windows 7, but impossible to install the driver

  I have an old HP1120C printer. HP lists as compatible, and refers to the Microsoft site. List of Microsoft confirms that the printer is compatible and no new drivers are needed. I try to load the driver and Windows 7 says that the driver is not compatible.
  What can I do?

  Hello

  Many thanks for the info Dominic.

  But y at - there no written document, which approves your statement "HP chose not to make the drivers supplied to Microsoft available for download on the HP site".

  Webpage of HP here indicates that there are drivers on Windows Update but it will not be available on HP.COM drivers.  If your printer is connected by USB then install it as shown here on the site of HP .  If you are sonnecting by the LPT port, and then follow these steps: go to the folder, devices and printers, add a local printer, use a Local Port, LPt1: (or whatever port is appropriate), then the update of Windows (from the selection in the lower right box), wait for the list to repopulate , and then select the manufacturer HP (Hewlett-Packard not) and select the printer Deskjet 1120c in the list.

• Impossible to install the driver of 2009f HP (sp43006.exe) Windows XP - Compaq Presario

  Recently purchased the system that came with Vista Home Premium. Has decided to migrate to XP. Everything seems to work fine except that the HP 2009f Monitor driver is not recognized. The monitor is currently working on a resolution of 1152 x 864 as default monitor

  I downloaded the file sp43006.exe on the site, but when you are ready to re - install the drivers from the directory C:\Swsetup\Monitors\HP_2009_1.0\Files the wizard can't find the appropriate files.  Looking at the directory, see the files HP_2009.icm and HP_2009.inf so I don't know why he can't find them.

  Looking at the State of the device to other devices Manager.  It seems I also have problems with Ethernet, PCI device, SM Bus controller and more controller driver video controller (VGA Compatible).

  Your kind assistance would be most appreciated.

  Hello

  Problem solved.  Download the ATI Radeon drivers.  Thank you

• Impossible to install the driver of Logitech Webcam - error code 19

  Hi gurus,

  I just buy Pavilion m9400t with Vista x 64, Dual Core Quad Q6700.

  Install Logitech QuickCam Pro 4000 without problem, so I decided to upgrade with the new webcam (Quickcam communicate Deluxe) and the beginning of the problem.  Install the new driver/software without problem, after reboot when I try to use the Webcam webcam cannot be used..., check the Device Manager for this webcam and found he said one! status, with the following error code:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (code 19).

  Tried the following, but nothing works:

  1 uninstall and reinstall using the new driver from Logitech.

  2. Uninstall and reinstall in safe mode.

  3. Uninstall and reinstall using the generic driver

  How can I get rid of this error code 19?

  Thank you

  In this issue fixed. Used regedit folder specific location and delete the LowerFilters entry, exit and it will get rid of the error code 19 from Device Manager, not even require a restart.

• Impossible to install the new Windows XP Home edition from scratch on Tecra S3

  With F6 in WXP install driver Toshiba raid (from USB floppy drive) properly installed first, partionating disc ok, continue to install Windows XP Home edition.
  WXP wants then again Toshiba raid drivers, installing WXP because he's not reading USB floppy (undirected). Do I need the recovery CD that I don't have.

  Hi guys

  I had a similar problem installing RAID on my old Qosmio.
  I didn't use the restore CD but the simple Microsoft Windows Boot CD.
  The problem was my incorrect installation procedure.

  After the installation of the driver the USB FDD drive RAID, the configuration of the installation works fine until I formatted the HARD drive or partition.
  This has been bad! Don't format or delete the partition after installing the RAID driver!

  In addition, make sure you use the right set of RAID! These settings can be checked in the BIOS! My Qosmio user manual provides lots of information about RAID. Did you check your user manual which settings are required to install the OS of Win CD?

  Do and good luck!

• Impossible to install the driver AMD lost correctly all the CCC and 3D options

  Hello world

  I have HP pavilion g6, win 7 64 bit. AMD Radeon HD card Intel HD graphics and 7400M.

  My problem started when my screen became black seconds much and when he comes back he said amd has stopped so I decided to update the driver.

  First, I downloaded the driver supported on the site

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98607-2&CC=emea_middle_east...

  but whenever I try to install the installation process very quickly the screen isn't even happen during the installtion and it says driver is installed successfully, although nothing has been installed and change anything absolutely.

  So I decided to download the latest driver from amd site14.4 amd. I had some problems during the installation, but it worked fine and I got all the options, including switchable graphics. But after awhile, the laptop began to hang at startup showed a blue screen saying that something was inconsistent.

  Then I tried to update the driver in Device Manager, and since then, I've lost all control catalyst also switchable graphics mode options and 3D in photoshop doesn't work anymore and whenever I close the catalyst a message come say it has stopped working. I tried several times to uninstall the driver and then install a new versin 14.9, the previous 14.4, support, but still nothing of them worked at all, also I tried to install with win 7 compatibility but it always gets stuck. Sorry for the elongation but I am so tired of this problem. I really appreciate any help.

  

  

  

  Hi @Black_violet ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question HP Pavilion g6-1045sx laptop and problems with the graphics software. Here are the drivers for your device. I uninstall both and restart the computer, and then reinstall only the AMD. It will include the Amd Graphics Driver and Catalyst Control Center of the computer restart.

  Intel will be installed automatically.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Please let me know how it goes.

  Thank you.