Impossible to install Works 8 update KB2431831

Similar Questions

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• Impossible to install the windows update and perform the system restore

  Original title: what restore systerm causing failure/Vista

  Windows update fails with a few updates, tried to restore the back before I loaded the system machanic - fails

  Hello

  1. What is the description which are impossible to install updates?

  2. What is the message exact error do you get when you try to install updates?

  3. you get any error message while you perform the system restore?

  I suggest you to follow the steps mentioned below and check if it helps:

  Method 1: Reset components from Windows Update from the link of the suite, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2:

  If the problem persists, then try to put your computer in a clean boot state, and then try to install the update to windows.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Manually try to install updates from the Microsoft Download Center.

  a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Method 4: You can also try to perform the system restore , safe mode and check if the same problem occurs.

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Hope this information is useful.

• HP ENVY spectrum XT impossible to install the BIOS update (processors intel)

  The name of the product of my laptop is HP ENVY spectrum XT and it runs on Windows 7 Home Premium 64-bit and its serial number is CND2340MHX, a notification came in the Wizard support for hp advising me on the BIOS update, when I click on the download and install it downloads the installation file but does not install it and when I checked the action record States that it is impossible to install. Is there a reason to fail?

  Hello Moodster1994,

  Please take a look at this document, which provides for the restoration of your BIOS troubleshooting steps.  Please let me know if this helps solve your problem.

  Good luck!

• Error code: 2 (impossible to install a security update)

  Original title: my computer will not install updates. Its a major update of security as well and I'm afraid something may happen to my laptop, if it is not updated. =(

  Whenever I try to install the update, it breaks down and and error messages says that it is a code 2 with an unknown error... Please help

  Hi alisaCree,

  • What security update that you are trying to install?
  • You are able to correctly install the other updates?
  • What operating system is installed on your machine?

  You can perform the clean boot and then download and install the update manually from the Microsoft Download Center.

  Boot start Windows7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install the important update, code 66A

  I tried to install this important update, but it keeps the default, something to do with code 66 a. I looked online and someone said to repair the file in the page uninstall, but this option is not available for me. Can someone please?

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

• Problems of updating Windows 8, the impossible to install the next update, KB3008273, kB3043812, KB3087039 and KB3078601

  I try to install the following update on a windows 8 system, KB3008273, kB3043812, KB3087039 and KB3078601.

  None of them will not properly install example KB3087039 will produce a 80073712 error message code that the other just off automatically install during the restart process.

  Does anyone has ideas to solve these problems?

  Kind regards

  Michel

  You can download the manual update of the catalogue and check if it installs. It is perhaps a corruption of backend.

  Open in IE/Edge:

  Catalog.Update.Microsoft.com

• Impossible to install the KB2744842 update, get 80072EE2 error code and have problems connecting to the Internet

  Original title: 80072EE2 and KB2744842

  Tried to install update Cumulative security for IE 9 for Windows Vista for x 64-based systems (KB2744842).
  The installation failed, and now the internet connectivity is corrupt.

  Errir received message is 80072EE2.

  Tried several reboots, power/power on the router, ISP shows works, but cannot connect to the internet.

  Help, please!  And what happened to the phone support for Windows Update problems?

  Hello

  1 did you do changes on the computer before the show?

  2. do you receive error messages about the inability to connect to the internet?

   

  Work with the question about the installation of update KB2744842.

  Method 1:

  See the site:

  Windows Update error 80072ee2

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

  Method 2: Install the update manually to the clean boot

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 in the article to set your computer to normal startup.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

  Step 2:

  Download manually on the site:

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2744842)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=34732

  Addressing the issue with the help of an internet connection:

  Method 3:

  See the site:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  You can also consult the site:

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  You can visit the hotline:

  Microsoft Technical Support phone numbers

  http://support.Microsoft.com/kb/319726

• Impossible to install pieces of updates problem

  Hi, I can't install updates. The problem is the background intelligent transfer service. It is not listed under services, but there are files in the system32 folder, after I enter a command window I get this:

  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>Bitsadmin/version /util / verbose

  BITSADMIN version 3.0 [7.0.6001]

  BITS administration utility.

  (C) copyright 2000-2006 Microsoft Corp.

  BIT version installed on the system: 3.0

  Version of the file binary BITS:

  path of file version langId

  C:\Windows\system32\qmgr.dll 7.5.6002.18111 1033

  C:\Windows\system32\qmgrprxy.dll 7.5.6002.18111 1033

  C:\Windows\system32\bitsprx2.dll 7.5.6002.18111 1033

  C:\Windows\system32\bitsprx3.dll 7.5.6002.18111 1033

  C:\Windows\system32\bitsprx4.dll 7.5.6002.18111 1033

  C:\Windows\system32\bitsprx5.dll 7.5.6002.18111 1033

  C:\Windows\system32\bitsigd.dll 7.5.6002.18111 1033

  C:\Windows\system32\bitsperf.dll 7.5.6002.18111 1033

  Is the secondary BIT DLL active service: No.

  Path to DLL BITS secondary service: N/A

  Pending file operations: None

  Unable to connect to BITS - 0 x 80070424

  The specified service does not exist as an installed service.

  I am at a loss to know what to do. In addition, I am not savvy computer very, so any help would be appreciated.

  Thank you.

  Kara bear,
  I suggest that run you the fix it tool of this article: reset Windows Update components
  First run it in normal mode and test.  If the problem persists then run it in aggressive mode.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install missing old updates of Windows XP-

  I am told that I have a lot of older Windows XP updates missing who might be a threat to my safety. I have Windows XP Pro Media Center edition SP3.

  I received prior assistance from a person who has provided support to Microsoft for a tech forum. She began to date of all the tests she could think to search for missing persons. We also tried to reinstall KB978601, an old update, time & time without success.

  I started with AVG free edition, but now I use Trend Micro Titanium Security 2011 my virus protection. We have also conducted tests with & without my virus protection on.  Finally, it was suggested that I try this site for answers. I currently receive all the updates with no problems and I'm not sure the updates, Miss me him. As I mentioned before, told me that even if they are more updated that the fact of not having them is a threat.

  Update of root certificate will not be listed in Add/Remove programs.

  Note: Updates of root certificates usually come out every 3-4 months. While the updates of root certificates are installed automatically in Vista & Win7, Windows XP users must install manually via the Windows Update Web site [what were thinking?] then make sure you run all CUSTOM analysis a few months, so to see if a root certificates update became available.

• Impossible to install the vista updates, receive error message: 80070641

  Original title: receive error code 80070641 in windows vista

  trying to install kb2596856 / kb2686827 / kb2656405 / kb2656368 / kb2687441

  This worked for me - method 3 in The Following Response.  Make sure that you back up the registry file before you start & create a Restore Point.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/window-installer-not-responding-error-641/a5ef9728-2bd6-48f2-8c03-3f85b5ecb7b0?page=2

• Error code: 66A (impossible to install the security update)

  It will not install updated security, every time that start us PC, update downloads, but will not be installed. 66A error code is displayed, apparently unknown error.

  Hello RaymondJoy,

  Thanks for your post.  Please see this thread for a possible solution to this problem.

  See you soon

• Impossible to install Windows Vista updates, tried to reinstall so

  This problem started two months ago. Vista does not install updates. Technical support told me to reinstall vista. I made and went on the vista update. Now I'm back to the same scenario. All download updates but do not install it. I'm not ready to re - install vista again because it took a month to re - install all my software.

  * original title - vista will not update even after reinstalling. *

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

• Impossible to install the selected updates. Windows 7... DON'T want Windows 10

  I have Windows 7 on my laptop (which is 5 years, cannot afford a new).

  I don't want Windows 10... But it does not close on the upgrade and it's affecting my updates. I'm going to "Updates" and it says "upgrade to Windows 10" then the "Get started" button in the right corner. "

  But what is frustrating so it won't let me update the selected updates.

  Until Windows Update would tell me "an important update" and or "optional" update Then I would choose which clicking on the box. Well now, I go to updates and the stupid thing of 10 window, then "other updates show." I click on it and choose my updates and click on 'OK '.

  That's the frustrating part. When I come back there is nothing that says... as it used to... "Install updates". I've tried everything. If the updates, I chose are just sitting there.

  Today is May 13, 2016 and yesterday (12) when laptop computer closing it are there upgrades then... But... when I went to see if the updates, I chose were installed were not. On the contrary, he says this (I have updates in bold):

  'Select the updates you want to install' (once again, I've done)

  Upgrade to Windows Home version 1511 10, 10586

  Update for Windows 7 for x 64-based systems (KB3140245)

  Download size: 627 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Optional

  Install this update to resolve problems in Windows. For a complete list of issues included in this update, see the Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.

  More information:
  http://support.Microsoft.com/kb/3140245

  Help and Support:
  http://support.Microsoft.com

  I do community then what to do? And still now I don't want to upgrade to 10... I have my reasons.

  Everything you need is here to do everything for you

  GWX Panel

  http://blog.ultimateoutsider.com/2015/08/using-GWX-stopper-to-permanently-remove.html

  The download is on this link

  http://ultimateoutsider.com/downloads/

  

• Impossible to install W8.1, impossible to install the KB2862973 update with error code 80073712, cannot connect to the microsoft account

  I have 64-bit Windows 8 and all these problems started when I tried to install the 8.1 update.  Whenever I try to go to the store to update to 8.1 I get the error message saying "we were unable to connect to the store. This could have happened due to a server problem or network connection has expired.  Please wait a few minutes and try again. "So I looked at this topic and you have tried all the tips of help from Microsoft, convenience stores, store transparent cache, etc. etc. etc. etc.. I can not connect to the store at all. Now I can't change users to a Microsoft account because it tells me that when I try that "we could not connect to the Microsoft services right now.  If this problem persists, look for 'referee' on the start screen. "I also performed this task without success.  Then I have a Windows update KB2862973 that fails to install and gives the error code 80073712.  I looked for solutions to this problem, and those who have tried unsuccessfully.  I really need someone to tell me how to fix all these issues, because I believe they should be linked.  It is a desktop pc Dell that is connected to the internet without any problem and is only about 1 year. I am tech savy, but need HELP!

  Thank you

  Shane

  Thanks for the detailed response. This problem may be caused because corrupted Windows Update components.

  I suggest you to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  If the problem persists, then I suggest also that you can run the DISM commands using the following link: http://support.microsoft.com/kb/947821

  Keep us informed.