Impossible to locate the CBD via AOL/J diagnosis

Similar Questions

• Impossible to locate the exercises folder

  Hi all

  I've recently LabVIEW 2014 and I want to learn the basics. Have the manual of the introduction course I have in hand, the exercises required files to a folder (C:\Exercises\LabVIEW Basics jemti) vi however, I'm unable to locate the exercise folder in my computer. I tried to get every possible locations and I think that I might even not the case after all. Can someone tell me where to find the exercises?

  Thank you in advance!

  Upward through LabVIEW 2011, school kits include LabVIEW Basics 1 and 2, as well as the exercise files (which were installed when you installed the software on your computer).  NOR is no longer distributes it with school kits.  Under support (I think) access (some) this material on the Web Site OR of course, but it is part introductory tutorials and additional.  I borrowed these links-Hooovahh (tutorial links are at the end...)

  Bob Schor

• Satellite A60 - impossible to connect the camera via firewire (IEEE)

  Hello

  Have problems with the dv camera connection to
  laptop computer via cardbus IEEE (firewire)
  It seems to be connected, but none noticed and not take at all.

  I think the problem is with the drivers - but what exactly should I install?

  Thank you

  I don't know which cam you use but when the cam is connected and recognized correctly, it will be listed in the Device Manager. So, do you need some software to have access to the material recorded. By using this software you can record the film on the computers HARD drive.

  Later, you can create DVD or do something else. I have more old digital camcorder tape 8 of 8mm inside. I connect the cam with firewire cable too. When the cam is activated, it is recognized and I can copy films of the tape to the computer s portable HARD drive. For this I use Ulead Movie Maker software.

  What exactly do you do with your cam?

• Message when you try to print "AcroRD32.exe impossible to locate the"..." "Componet app was not able to start because"DLBAGF. "DLL"

  I am trying to print a document and I get this message "AcroRD32.exe Unable to locate component"... "app was not able to start because"DLBAGF. " DLL' not found... Reinstall the application can solve problem... can you me please help... Thank you

  Moved from feedback

  Original title: my problem is with Microsoft Adobe...

  No problem.

  This link can be a good start for you.

  http://forums.Adobe.com/message/4957379

  Good luck with the resolution of the problem.

• iPhone 4 impossible air to the ipad via bluetooth

  iPhone 4 (A1332)

  IOS 7.1.2

  IPad air (A1474)

  IOS 9.3.2

  Hello everyone, I am trying to use the app on an iphone 4 keynote to control a keynote on ipad presentation.

  It works fine on wifi.

  However as it's something outside, I use bluetooth and it does not work. Both devices can't see not even each other.

  I tried all the steps basic described everywhere, including here:

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connect again.

  In order to solve the problems more away, I tried to pair it with my macbook. The pairs of ipad without problem.

  However the iphone 4 does not see the macbook in a first time. The macbook sees the iphone, so I ask macbook pair. demand of coupling is displayed on the iphone but the iphone then is not pair. It shows my macbook and 'not connected', even on the macbook.

  Someone at - it a forward and could get out me of this pickle? I need to make it work for Monday or I'll be in trouble.

  Thank you!

  Happy Saturday, nicohk92!

  I understand that you want to use your iPhone 4 with Keynote Remote to control a presentation on an iPad. You are in the right place for answers.

  Using these two devices, you must have two devices connected to the same Wi - Fi network to use Keynote Remote as expected. Read this article: Use Keynote Remote on iPhone, iPad, or iPod touch

  If you use Keynote for iOS 2.5 or later and the two devices iOS have a lightning connector, devices must be connected to a specific wireless network. You can also use Bluetooth to connect your devices.*

  If you use an earlier version of Keynote on each device, or if each device has a dock connector (iPhone 4, iPad and iPad 2 3rd generation), make sure they are both connected to the same Wi - Fi network.

  Keynote Remote does not work on a network hosted by a Mac with Internet sharing, or a network led by an iOS device using Personal Hotspot.

  Your iPhone 4 lacks a lightning connector and instead uses a dock connector, it is a requirement to be on the same Wi - Fi network. You can consider using a more recent device like an iPod touch with a lightning connector or iPhone 5 and later versions, to control the presentation.

  Enjoy your weekend!

• 12.3.3.17 iTunes cannot locate the iPhone via USB

  Downloaded iTunes 12.3.3.17 March 27 and since then he can't find my iPhone 6 s when it is plugged into a USB port on my machine Windows 10.  There is no Apple USB Manager device at all when I open the Device Manager in the Control Panel, so I suspect this is the problem.  Already reinstalled everything that I can reinstall so this isn't the answer.  Seems to be a bug in 12.3.3.17 since I have never had problems before.  Any thoughts?

  Solved with the link below.  I think it will help a lot.

  http://www.technipages.com/iTunes-fix-iPhone-or-iPod-not-detected-in-Windows

• RtHDVCpl.exe impossible to locate the component

  IAM getting this error at the start of the system (rthdvcpl.exe)

  This seems to be related to Realtek HD, so try to update your video card drivers.

• Impossible to locate the fonts problem

  Hi all

  We recently encountered this problem:

  

  We do not know how it fires is and how to solve the problem. Could someone help us with that?

  More information, police 32046 is a font that is imported from a TTF (Arial).

  Thank you.

  Seems that there is a permissions problem; If it works run from the command line and your Java process doesn't work.

• Is anyway that I can transfer music from my iphone to itunes to help locate the missing files of the song

  So today, I opened itunes and about half of my music files were missing. A message came when I tried to click on a song and says that it is impossible to locate the files and the missing files now have an exclamation mark next to them. My iphone 6 has all the music files still on it and I am able to read them. I had happen in the past with one or two songs that have disappeared and I tried to connect my iphone to try and resynchronizing the file of the song, but just itunes erases songs out of my iphone, so I re-download just them, although it is a big problem. But because there are about 400 songs missing I need help to solve this problem. If anyone can help it would be greatly appreciated thanks!

  IPhone - ios 9.2

  ITunes - 12.3.1

  See the empty/corrupted after upgrade/crash iTunes library or

  Recover your iTunes from your iPod or an iOS device.

  TT2

• Could not locate the agent.exe ODS.

  In recent weeks, when my computer starts up, I get a message that says ODS agent.exe impossible to locate the component dnssd, dll not found - need to re - install. I don't remember to remove whatever it is and wonder if this is a serious problem and how can I fix it?  I use Windows XP Home Edition II.

  Thanks for your help.  Elizabeth

  E-mail address is removed from the privacy *.

  If you mean that you see a message like this:

  ODSAgent.exe - Unable to locate component
  This application has failed to start because c:\windows\system32\dnssd.dll was not found.  Reinstalling the application may fix this message.

  ODSAgent belong to some software from Apple that allows remote DVD and CD disc sharing, restoration of system software and a migration wireless with MacBook Air.

  If you have not deleted the file, he could have been quarantined (actually deleted) by your unspecified antivirus/antimalware software.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If you use this Apple software and features, you can see if the uninstall and reinstall the application by downloading it from the Apple page:

  http://support.Apple.com/kb/DL112

  You might be able to get by with only replace the missing c:\windows\system32\dnssd.dll file that you can download on my SkyDrive, but there could be other files that are missing too so a relocation may be required if you use this software.

  If you do not use this software, you can uninstall it or disable the ODSAgent Service, so it does not start when you restart your system.

  Note that the 'experts' Support who are engaged by Microsoft engineer will say just to try running sfc/scannow and check if it helps (to help any) or run msconfig and disable the Service and that you will keep seeing the message, but that is not the problem - it fixes the symptom of a problem which is not the same thing that actually solve the problem (however counts as a 'response' on) their planet).
   
  Maybe it's fine if you use not just software, but you will leave with a sloppy XP configuration.

  If you do not know the software and do not use it, just uninstall it from Add/Remove Programs, and that should remove afflicted startup ODSAgent as well.

  To download the c:\windows\system32\dnssd.dll on my SkyDrive, follow these steps:

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, put a copy of the file in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called dnssd when the name of the file should really be called c:\windows\system32\dnssd.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  Restart and look at things, to remember that you will have to perhaps download and reinstall this app from Apple, if other files are missing.

• Impossible to use the box of favorites - a pop up appears saying unavailable location

  original title: IMPOSSIBLE to USE THE FAVORITES BOX-APOP-UP to POSTER SAYING LOCATION NOT AVAILABLE

  Whenever I try to use the box of Favorites (top-right), I can use the tabs 'RSS' and 'History', but not the "Favorites". Instead, I get a message saying: 'not available place '. Can someone out there help, please.

  Edward Baker

  Hello

  I suggest try to reset Internet Explorer and check to see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-7-settings

  It will be useful.

• Impossible to change the network location of the public in the network and sharing Center.

  I'm unable to change the network location of the public to the private sector or at home. In network and sharing Center, he is listed as unidentified network, and under "Public network" is written in black and is not clickable.

  I have a connection high speed (USB connected) also listed above under "Home network", it is written in blue and is clickable.

  The affected connection is an XBOX 360 connected via a network cable. I wish to connect the XBOX to the Internet via ICS, but cannot do so until this connection is either private or at home.

  Things I've tried so far;

  Reinstall the drivers,

  disconnect and reconnect, turning on all the elements concerned.

  All ideas,

  Tourist shifty.

  Enable ICS on the connection Strip and not on the XBOX 360 connection.  When you do this, the connection of the XBOX 360 will still be confused with a public network, but everything should work. Boulder computer Maven
  Most Microsoft Valuable Professional

• Impossible to attach Windows 10 laptop computer to the Internet via cable USB iPhone 5 c after update to iTunes and iPhone (March 2016)

  System information:

  Tactile Lenovo Y50-70

  Construction of 10.0.10586 of Windows 10-10586

  iPhone 5 c - iOS 9.2.1

  iTunes - 12.3.2.35 / 64-bit

  Cell carrier: Etisalat AF

  Last year in Afghanistan, I have used my iPhone 5 c to attach my laptop to the internet simply by connecting via USB.  It has always worked.  Was very simple.  When I returned to the States for R & R in November 2015, I've updated my iPhone and iTunes to the latest versions and upgrades Windows 8.1 to Windows 10.

  I am now back in Afghanistan and USB tethering no longer works.  WiFi tethering works half the time.  The other half of the time, when I try and connect to the network of the iPhone, it is said, you cannot connect to this network.  When I can't connect to the phone, I disable the personal hotspot, WiFi and Bluetooth on the phone and then I turn it back on.  I also turn off my WiFi adapter on my laptop and turn it back on.  Which usually solves the problem and then I can connect via WiFi.

  Do some research on the internet, I read that there was a file corrupted when the current generation of iTunes, but Apple had set and you just need to reinstall the current version, which I did.  I have reinstalled iTunes by suggestions from different site.  After reinstalling iTunes and restart, I can always have my phone to connect to internet via the USB cable.

  I want to be able to connect my laptop to the internet using my phone via the USB cable.  I want it all works just as it did previously.  Connection via WiFi is a pain in the ass, because it does not work half the time and disconnects on a regular basis.

  Please tell us what should I do to solve this problem.

  Thank you.

  OK, I finally understand how to solve this problem.

  I was able to understand because of this post:

  https://discussions.Apple.com/message/29267225#29267225

  The problem is that Windows 10 was not install appropriate drivers for my iPhone.

  You can see 2 places to see.  We're in the control panel.  After you plug in your iPhone, the iPhone will be displayed and highlighted as not having is not a compatible driver.  The other place is in "Devices and printers", there you will see 3 apple devices: 1 Apple Mobile Device USB Driver, iPhone 2, and 3. Apple iPhone.  All three appear when I plugged in my iPhone.

  However, the problem was one that said iPhone really should have said "Apple Mobile Device Ethernet".

  So, how to fix this?

  Open devices and printers-> right click Iphone which should be under "Unscpecified"-> properties-> hardware-> Propterties tab-> change settings-> tab driver-> update driver-> Browse my computer for software Local-> Browse to the directory "C:\Program Files\Common Apple Mobile Device Support".

  Make sure you have the files box to include under verified.

  Who did.  Windows successfully installed the necessary drivers.  Now, I can easily connect to the internet via the USB cable again without any problems.

• Creative cloud Office do not show App impossible to view and manage the app via the desktop, the wheel is idling

  Unable to view and manage the app via the desktop, the wheel is idling. Mac os 10.11.1

  Hello

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

  You can also view the nets below where this issue has been addressed:

  Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

  Creative Cloud Desktop App taped blue spinning wheel after update.

• I have lightroom 5 bought the downloadable version on the adobe site. months he did the demo version of cc that it has expired. now on lightroom, it says that my develop the module is disabled. Impossible to locate one I bought on the site to download aga

  I have lightroom 5 bought the downloadable version on the adobe site. months he did the demo version of cc that it has expired. now on lightroom, it says that my develop the module is disabled. Cannot locate the one that I bought on the site to download again because they changed the adobe site drastically.

  https://forums.Adobe.com/search.jspa?q=%22develop+module+is+disabled%22&place=%2Fplaces%2f 1383621 & depth = ALL