Satellite A60 - impossible to connect the camera via firewire (IEEE)

Hello

Have problems with the dv camera connection to
laptop computer via cardbus IEEE (firewire)
It seems to be connected, but none noticed and not take at all.

I think the problem is with the drivers - but what exactly should I install?

Thank you

I don't know which cam you use but when the cam is connected and recognized correctly, it will be listed in the Device Manager. So, do you need some software to have access to the material recorded. By using this software you can record the film on the computers HARD drive.

Later, you can create DVD or do something else. I have more old digital camcorder tape 8 of 8mm inside. I connect the cam with firewire cable too. When the cam is activated, it is recognized and I can copy films of the tape to the computer s portable HARD drive. For this I use Ulead Movie Maker software.

What exactly do you do with your cam?

Tags: Toshiba

Similar Questions

  • I see Camileo P30 photo on laptop as if connect the camera to the TV?

    Hello!

    I have laptop with HDMI and Toshiba Camileo P30.
    I see the image of the camera on my laptop as if connect the camera to the TV?

    Should what software I use (cause that nothing happens, when I connect my camera)?

    Hello

    Is your laptop supports HDMI IN port?
    If this isn't the case, then you can not do this.
    You need an HDMI port which received signals as a TV or external monitor

  • Trying to get attached with NIKON D 7000 on iMac with El Capitan.  Worked well last time I tried (pre El Capitan).  It is impossible to find the camera but it recognizes for the download of images.

    Trying to get attached with NIKON D 7000 on iMac and Macbook Pro, both with El Capitan.  Worked fine before as the normal shooting form in my studio (pre El Capitan).  It is impossible to find the camera but it recognizes for the download of images.

    Hi jubei.

    Attach cameras Nikon and Leica using Lightroom CC 2015 and Lightroom (also noticed on other versions of Lightroom) 6 is not currently supported on El Capitan. Please see Lightroom and El Capitan | Mac OS 10.11.

    Kind regards

    Assani

  • I installed the Kodak camera software, but I can't it connect the camera to the program

    I installed the Kodak Camera DC3400 camera controls in Windows 7. I have connected the camera to the computer and turn on the camera. When I click on the camera controls, it gives me a message that says there is an error and cannot connet the camera.

    Hi Oryduck, this is a support forum for firefox and other mozilla products, but the problem with the device seems not related. Please get in touch with the help of kodak to https://support.kodak.com/ instead. Thank you for your understanding!

  • Satellite A60: Unable to connect to the internet via a modem - no dial-up

    In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

    Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
    The driver is asyncmac.sys = MS Access Remote network serial driver.

    I have:
    -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
    -modem uninstalled / reinstalled
    -update of Windows XP through windows update
    -update of the bios / modem / network drivers from Toshiba

    No luck, the RAS asynchronous card error is still there.

    Any suggestion?
    Thank you
    Alessio - Italy

    I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
    The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
    On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
    http://forums.practicallynetworked.com/showthread.php?t=6781
    I followed the instructions and run RArepair.exe.
    It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

  • Satellite A60-116 - need exactly the reference numbers

    Hi all!

    my laptop is Toshiba Satellite A60 116

    I need four parts, I couln can't find number inside and have no ideal is what numer. Please help technicial analyze and tell me the number of pieces exactly.

    * first of all parts: * http://www.cxj98.com/1.jpg

    This cable is designed to connect to the motherboard hotkey.

    * part two: * http://www.cxj98.com/5.jpg

    This cable is in sleep or Hibernate function when fold and turn the computer.

    * third parts: * http://www.cxj98.com/8.jpg

    This strip of plastic is for optical disc drive, seems owner of optical disc drive.

    * the room suite: * http://www.cxj98.com/11.jpg

    This cable is designed to connect button LED for motherboard.

    Thank you very much.

    Hello

    I think you should get in touch with an authorized ;) services provider

    Here he s a user forum and I think that an ASP can answer this question better. In addition, you can also order new parts.

    Here is a list of them:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  • Satellite A60: Switch wireless on the side is taken on

    Hi I have a laptop Satellite A60, I want to turn on my wireless LAN but the switch on the side is covered on as it is just for show. I to believe I can turn it on, the symbol to the fron and the on / off on the side, but as I said is covered more and not a switch like showld be. Theis means I can't get a wireless connection or is it a fault in Notepad? Help, please.
    Thank you very much

    I don't have an answer, I just want to share your frustration. Recently I got a wireless home hub, but I can't go to this topic with my A60.
    I also have the light at the front and the switch sheets on the right and a manual that talks about wireless LANs in bright tones.
    I was led to believe it was active wireless, but it isn't!
    Sometimes even with a graphic 'research Wireless' but it is useless if it doesn't have what it takes to work [when it is in. the wireless Hub].

  • Satellite A60-142: Tips for the new laptop

    Hi all

    I think to buy a new laptop.
    I currently have a Satellite A60-142 and I only am not too thrilled about this model since the fan makes me crazy... It is constantly running and compared to my old laptop (Satellite 1410-304), it makes a lot of noise...

    So, I want to get a new laptop which is quieter...
    I need basically for email/surfing/Online games/digital still camera.

    Thanks for the tips!
    Ellen

    Hi Ellen

    Well, it is a known issue that, often, the fan works. If you play games or use other applications, the laptop works at high performance and the parts of the device as the processor or graphics card produce a lot of heat. In this case, aeration run also at high speed. It is a simple fact.
    As far as I know, you can try to change the settings of cooling in the power utility.
    In addition it is not easy to say which model of laptop runs more quiet. In the notebooks of high performance fans are bigger and louder by contrast office books are ineffective but easier to cool.

    It's not easy to make a choice

    Good bye

  • S110 does not see the window of the camera via radio (OSX) on MacBook Air 10.7.5, HELP!

    I have a Canon S110, 1.0.2.0 firmware and can not get the camera to connect to my Mac OSX 10.7.5.  I installed CameraWindow via the canon website and have 8.10.2 but it still not connect.  I can't use the CD that accompanies my Mac without a CD/DVD drive.  Help, please!

    Problem solved.  I followed a detachment ELPH where someone had the same problem which had a link to CameraWindow 8.10.2b download.  I downloaded this and now it works fine.

    Canon, you must update your Web site and compatibility.

  • Satellite A200-08JC - software of the camera Chicony does not start

    I installed the correct drivers for my 08JC satellite A200 XP, but when I click the button start to run the software, it shows something loading for a few seconds, then stops. The camera does not illuminate and the display software that shows the view of the camera does not start: nothing happens.

    I searched around on Google for a solution, but other users having similar problems to the least get an error message to help. I have nothing like that.

    Does anyone have ideas that could help?

    And what dodey now?
    Driver installation doesn t help, you don't want to test the functionality of device with the settings you would expect now?
    A magical solution or what?

    Description of your model name is somewhat strange and A200-08JC is not known to me but overall Satellite A200 notebooks are WXP supported.
    Can you please post the model name for laptop again?

  • Satellite A60 - need drivers for the function keys. Urgent!

    I installed Windows XP Pro on my laptop Toshiba Satellite A60, but after that I couldn't use the function key. I've been looking for driver but I haven't found yet, even in this Web site.
    Someone knows it please help me what to do. Thank you so :)

    Hello

    That fear I know, first I have to install Hotkey Utility.
    After that, please install all other tools & utilities. Try this and let me know if was successfully.

  • How to format Satellite A60 302 without using the CD/DVD drive

    Hello

    I have a laptop SATELLITE A60-302, and I had a problem with cd player. I want to format the computer (WIN XP) and I wanned to ask if I can format the computer not by the cd player but another way as disk on key or something...

    Thanks :)

    Hello
    Your best bet might be trying to use an external CD/DVD drive to install Windows XP (must confirm that your laptop can boot from USB CD/DVD). I would not recommend it otherwise because they are pretty complicated and you will encounter other issues.

    Concerning
    Ben

  • Satellite A60 do not mount the drive UJDA760

    My Satellite A60 CD-ROM/DVD-ROM drive has stopped working properly. He is more able to read DVD - ROM, a serious problem because the recovery disc is a DVD-ROM.

    I recently bought a replacement drive, the same model as the old disk number. But when I installed it, the computer does not recognize the drive. The drive has power and running disks. The computer does not know it is there.

    Someone has an idea of what can be done to encourage the player from the computer? I updated the BIOS to the latest version, but that did not help.

    I appreciate any suggestions.
    Phil premium

    Hi Phil premium,

    The old drive is recognized correctly in the BIOS?

    I'm not sure but some readers have a rider on the back where the connector is. There you can switch between Master, Slave and Cable Select. Please put the jumper on Master and if it s does not, try the slave mode.

    In the worst cases, the new drive is defective and you must return it to the store and ask for a replacement.

  • Satellite A60-202: need to the main exact map references

    Hi, I would like to know the exact reference of the main card for Toshiba Satellite A60-202 with 512 MB of memory and 40 GB of type HD PSA60E-OLP06TFR model SA60-202
    Thank you
    Yves

    Hello

    Is your device faulty? Want to swap the motherboard?

  • Satellite A60-672: Question on the memory expansion

    Hi, apologies for this new! I would like to increase the memory of my Satellite A60-672, where I can find what I need (including the number) etc.

    Hello

    Your device can handle with max 1280MB. The compatible modules are:

    PC2700 256 MB (PA3311U - 1 M 25)
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    Good bye

Maybe you are looking for