Impossible to move the 3D camera?

Similar Questions

• Impossible to move the camera with the touchpad in the games while moving in Windows 8?

  I've seen this happen on two Toshiba laptops now, I can't move the camera with the touchpad in games like TF2 while I also move with WASD keys. The problem disappears when I use an external mouse, even if, I was wondering if anyone else has this problem, and if someone has solved. I disabled the Edge slides in the Synaptics Control Panel if it helps.

  Thank you in advance! :)
  Edit 15/5: I did more research, and it seems that there is a feature called "PalmCheck. I am yet to confirm because I'm away from home, but I will as soon as POSSIBLE.

  Solved! The feature was PalmCheck Synaptics Control Panel.

  To fix:
  1. look for 'mouse', click on settings, then 'Mouse' with the mouse icon.
  2. click on device Options.
  3. click on settings.
  4 expand the category of "pointing".
  5. click on PalmCheck, then the small icon of gable beside him.
  6 move the cursor to a Minimum or offshore.
  7. apply, OK, and you're done!

• Storage vMotion - impossible to move the virtual machine

  All,

  I have recently upgraded to version 4.1 ESXi 4.1 U3 of VC2.5 ESX 3 vCenter Essentials - I decided to make my new vCenter server a VM - everything went well on the upgrade so I am now looking to do work on my storage system (EMC Celerra). I have virtually no space on my LUN and my CIFS shares are increasingly full also... However I have a file inside the EMC system which is 6 to size which houses a 200 GB LUN - it's the logic unit number that contains my VM vCenter. What I want to do is... move this vCenter VM off this LUN to local storage, reassign 6 TB to the pool file system and extend the 3 TB CIFS file system and then present the rest of the space as LUNS for VMware. My problem is that I'm not licensed for storage vMotion and they only way I can storage vMotion, VM off the coast of this LUN is to stop it and move it but because it's my vCenter Server I can perform this action by the customer.

  I guess I might need to drill holes in the host using putty to move the vmdk file, but I'm looking for any useful measure to enable me to move this virtual machine.

  Thank you

  If you are not allowed to Storage vMotion, then you can watch using VMware Converter and do a V2V.  Once the VM vCenter has been "copied" in the new destination LUN, it works, make sure that everything is right, then delete the 'old' vCenter VM disk.

• Impossible to move the location of ScratchConfig

  Hello

  I want to move the folder .locker on the 1 data store, but when I change the ScratchConfig setting under Advanced I get the error "the value entered is not valid. Enter a different value. "Error stack" call failed "OptionManager.UpdateValues" to "ha-adv-options" on ESXi "wn1esxi1" object

  I tried to enter the values /vmfs/volumes/4ce0ba21-c3f2f0a8-5c36-0016355b5497/.locker and /vmfs/volumes/DataStore1/.locker without success.

  Does anyone have any ideas as to why I get this error and how to fix it?

  Thank you very much

  Glen

  Just enter the path, for example, / vmfs/volumes/DataStore1

  Dave

  VMware communities user moderator

  Forum - VMware communities forums upgrade notice will be upgraded the weekend of December 12.  The forum will be in playback mode only the Friday 10 December 18: 00 PST until Sunday December 12 PST.

  Now available - VMware ESXi: planning, implementation, and security

  Also available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Still, it is impossible to move the folder of drive iCloud on another drive?

  I'm looking to free up disk space where the operating system is located. I have an external hard drive with alarge amount of free space that I prefer to use the location iCloud against my SSD drive that on the space due to data 'stored' in the iCloud is insufficient.

  Data not synchronize if you try to move iCloud drive.

  Storage space, there is a solution > iCloud: delete the pictures and videos to save storage

• Impossible to move the index location winner 7 - he keeps back to original location

  In Windows 7 64 bit Advanced Indexing Options, when I select a new location for the search index on another local hard drive, the indexing service appears to stop and restart as expected. However, when I go back to the settings of Index Options Advanced tab, it shows that the location of the current index has not changed. I looked in many places for solutions to this problem, but not much came. Any suggestions on what might be causing this and how to fix gratefully received.

  This solution did not work for me. I solved it in the end as follows:

  I open the Contol Panel Indexing Options and selected advanced and Options entered in the new location of the Index on a different hard drive. Before you select OK, then I have to Start Menu, Control Panel, administrative tools, Services and then stopped the Windows Search Service (right click, select shut down). Once the service has been stopped, I returned to the window from the Options/Advacned Indexing Options and select OK to confirm the new location of the Index and then selected near full operation. After a reboot, I checked again Indexing Options and confirmed that the new location was working.

• Impossible to move the mouse cursor using the trackpad on laptop Sony and some of its functions does not work.

  Former title: Sony trackpad not working no-Windows 8

  Hi guys,.

  I have a sony vaio s series that I bought last January. It comes preinstalled with windows 8, and I use it only about 2 - 3 times a week. 2 weeks ago my trackpad stopped working because I can't move my cursor. I can zoom in and zoom out, and other things, but there is a problem with some functions of the trackpad. I checked the synaptic driver and it says that it is up-to-date.
  now, I suspected that it might be a hardware problem, so I sent it to sony Service Center because it is still under warranty. Unfortunately, it is not the case and I was informed that it's a software problem. They advise me reinstall windows 8 because it is the only solution to the problem, they believe. (I want to clarify that it is probably not Fn + F1, as when I start the laptop, the trackpad works perfectly fine for about 30 secods and suddenly Soundtracks autour after that).
  I hesitate to do because it is a daunting task and I'm not really intuitive with such things. I wonder if you have any suggestions or if anyone has experienced the same problem.
  My hunch is that a windows update is responsible for this, but I'm not entirely sure. Indeed, 3 weeks after I bought my laptop, that this has already happened to my once but after the reboot, the trackpad has worked well. now even by restarting the computer does not help. Basically, I have to use a mouse which is not convenient when I'm on the road...
  Thank you very much! appreciate any help I can get, really. I'm about to want to sell my new laptop T_T

  I finally solved the problem. I reinstalled the driver in safe MODE. Hope it could be useful to someone else

• Impossible to move the order of the content in a slide show

  Since the last update, I have not been able to move my slides up and down to change their order.  Before, I was able to "replace" the image and then "click and drag" the slide appears sooner or later in the order.
  Is there a function 'lock' that I'm missing?
  

  Hello Chuck,

  I tried to reproduce the same thing at my end and have found that the preview of the sequence does not change in the mode of creation,

  However, he changes while we saw the muse site or in the browser.

  Please check and let me know if it works

  Best regards

  _Ankush

• Windows 8 will not let me move the AppData\Local folder to new drive

  All,

  I wanted to get my user account files from C drive which is a smaller SSD drive at most of my hard drive. I encountered several problems.

  A lot of trial and error, I was able to move each file of folder of the user account to an identical structure on my drive D (a "spinner"). Once I worked on all the kinks, everything worked without problems.

  However, I was unable to move the hidden AppData folder. I discovered there are three subfolders: roaming local and LocalLow. I was able to move LocalLow and roaming without problem. However, Local gave me problems.

  I discovered that the Local had some folders and files under it for which I have no permissions. Once I gained permissions for them, I thought I was on my way. The command to move the folder (using the Properties dialog box) has started working on the transition of 79 000 files. He moved all but 19 of them. He choked on all 12-15 files that have been opened and used by the system and the balance of the 19 had too long of a file name. So, I was disappointed.

  I then decided to create another administrator account and the sign of the current account and connect to the temporary administrator account that I had just created. I thought that I could then move the files because they would not be opened and used by the system. But, when I open the Properties dialog box, the LOCATION tab was gone, so I could not move the files.

  I need answers to two questions:

  • Why Microsoft would give the user a LOCATION tab with a NAVIGATION button, if it was impossible to move the AppData\Local folder?
  • Is there another way that a layman like me can change this setting? Can someone direct me to here? (Such as it is, 2 of the 3 AppData files are on drive D and 1 is always the SSD C drive.)

  Thank you.

  Matt

  OK, I fixed using a symbolic link. I moved my complete record of users. Here are the steps I used:

  • Create a folder on the "C" drive, called "this_is_c" and create a folder on the disk "D", called "this_is_d" - it is only for identification purposes in the later stages.
  • Boot from the Windows 8 Pro disc. (In other words, will not start hard drive.)
  • Do not choose 'Install now' - choose ' repair you computer.
  • Then choose troubleshooting
  • Choose Advanced Options
  • Then choose command line
  • The player that appears corresponds to the player 'X' - which is the recovery disk.
  • Type "C:" to switch to the 'C' drive
  • Type "Dir" and see if you see the folder "this_is_c".
  • If you do not, continue to change letters until you see this folder.
  • It worked that the 'C' drive during this "repair" was maybe the same as my 'C' drive when I boot normally.
  • Find the "D" drive through the same process - that is, try to find the folder "this_is_d".
  • It worked that the "D" drive during this "repair" was maybe the same as my "D" drive when I boot normally.
  • Type this command: xcopy/e/k/o/h/b c:\Users d:\Users see the next chip
  • First drive name must be the name of the drive as the "repair" attributed to your normal boot drive 'C '. The second disc should be burned as it would be during a normal boot. So, in my case, these conditions were the same. Note: use a capital 'U' for users instead of lowercase 'u' in users.
  • Type "D" when prompted.
  • Type the following command: rd /s c:\Users
  • Type this command: mklink /d c:\Users d:\Users
  • Type this command: exit
  • Continue to start.

  This will create a symbolic link that will redirect all actions to or from users on 'C' folder in the new folder users on "D". In regards to windows system knows, he is still sending the disk of 'C '. It is just redirected.

  This works perfectly for me. I installed apps and run programs without problem.

  It's a sort of understand. But it works for me.

  Matt

• I can't download photoshop for just the error: error DF024 cannot move the file in "C:\Program Files (x 86) \Common Files\Adobe\Installers\adobeTemp\.

  I have a problem to download photoshop. I tried twice and both times failed due to the error-DF024 even impossible to move the file in "C:\Program Files (x 86) \Common {A3B6E381-F2E8-47CD-87B4-96B1E3FF61D3} \_2056_d94c53616fc 2e6a7ac56c1ece92dad40 ' to 'C:\Program Files\Common Files\Adobe\Plug-Ins\CC\Generator\preview.generate\node_modules\ws\build\Release\validati on.node' error 32 the process cannot access the file because it is being used by another process... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify. SEQ (2057). I don't know what to do and would be very grateful of any helpful suggestion. It's windows 7, 64-bit operating system

  uninstall all cc

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  install the application of office cc, https://creative.adobe.com/products/creative-cloud

  the application allows to install ps.

• Satellite A60 - impossible to connect the camera via firewire (IEEE)

  Hello

  Have problems with the dv camera connection to
  laptop computer via cardbus IEEE (firewire)
  It seems to be connected, but none noticed and not take at all.

  I think the problem is with the drivers - but what exactly should I install?

  Thank you

  I don't know which cam you use but when the cam is connected and recognized correctly, it will be listed in the Device Manager. So, do you need some software to have access to the material recorded. By using this software you can record the film on the computers HARD drive.

  Later, you can create DVD or do something else. I have more old digital camcorder tape 8 of 8mm inside. I connect the cam with firewire cable too. When the cam is activated, it is recognized and I can copy films of the tape to the computer s portable HARD drive. For this I use Ulead Movie Maker software.

  What exactly do you do with your cam?

• Windows Movie Maker ceases to meet impossible to publish the movie

  Windows Movie Maker stop - impossible to publish the movie

  Windows Movie Maker gel

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  =============================================
  I guess you have a problem with incompatible
  files sources... the most reliable formats to use are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wmv, wav

  The following articles may be useful:

  Type of file with Movie Maker compatibility
  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?
  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer - MS - MVP - digital media experience

• Android update 6.0.1 impossible to format the SD card internal memory cannot move the app to the SD card

  I've just updated to Android 6.0.1 yesterday evening and I realized a lot of things has changed. I can't access my store apps on the SD card in Android 5.1.1. I was able to move apps to the SD card on 5.1.1 to free internal memory. Update Marshmallow supposed to have better functionality. It can mount the provided internal memory SD card I have to formatted as internal memory. I have bee playing around with my phone all day and I made during the liberation of Sony, they do not have this feature. I've been YouTubeing autour and found in 6.0.1 in the submenu settings/storage/SD card, there should be 3 possibilities. Eject, Format and format the internal memory. That's what Miss me. Also if you insert the SD card for the first time, it should appear a notification asking you what to do with the SD card. He don't ask me. This is a feature known with Marshmallow. My phone have 16g, it won't hold all my apps, which was the reason why I spend a few apps to SD on Android 5.1.1. So what's happening?

  I have also factory reset my phone and format my SD on my computer, it still doesn't work. He only treats like a portable storage.

  @CameronT

  Problem solved

  I don't know that it's a bug or not. the reason why he did not move the app to the SD card was because the SD card has been beyond 32 G. Since I was a 64G with a total of 59G free. It will not transfer.  So I downloaded my photos, music and videos to take 1/2 of the memories. Now I have 29G left, restarted my phone and transfer of applications very well. go figure.

  A solution has been published on Androidcentral.com

  http://forums.androidcentral.com/ask-question/598712-can-t-move-app-not-enough-storage-space.html

  It's just a work around now, it would be really nice to have just mounted as internal memory memory card.

• Using Windows movie maker-how can I use Webcam instead of the digital camera

  How can I configure to use the Web cam so of digital camera. Vista uses as an ongoing program.

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  It will be useful.

• OK, I imported the files movie maker game cam and yet they you can read in the as fast forward spped, how to fix this pls__

  OK, I imported the files movie maker game cam and yet they you can read in the as fast forward spped, how can I solve this pls

  OK, I imported the files movie maker game cam and yet they you can read in the as fast forward spped, how can I solve this pls

  ===============================
  Might be interesting to try to convert the files in the
  format .wmv before you import it into movie maker.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.