Starting point for the signal clk sample

Similar Questions

• import problem ORA-01658: unable to create the STARTING point for the segment in your

  I created the above tablespace
  
  create tablespace SAMPLEDATA
  DataFile ' / u01/app/oracle/oradata/sample/sampledata01.dbf' size 50 M autoextend on next 10 M maxsize unlimited
  logging
  Local extended management
  segment space management auto
  Flashback on;
  
  create SAMPLE user identified by usrmringnew
  SAMPLEDATA default tablespace
  tablespace temporary temp;
  
  
  Import from 9 to 10r2
  
  IMP fromuser = touser = sample indexfile=/home/oracle/import/production/export/import_productionddl_20081007.log file=/home/oracle/import/production/export/production_export_20081007.dmp log=/home/oracle/import/production/export/production_import_20081007.log production system
  
  Unfortunately, it gives the error
  
  ORA-01658: unable to create the measure INITIAL segment in tablespace
  
  could someone kindly help me on this?
  
  Thank you very much!

  Hello

  As you can see, your data file specifications need to increase of 10 M, but your file system has only 3.7 M of available, that is why the server is unable to increase the size and you get this error message.

  Solution - you can use one of following:

  1. move the data file to a point of editing with sufficient space.
  2 - Add a new data file for the tablespace and host this data on a new mount point file with sufficient space.

  Published by: sanjayIndia on October 8, 2008 09:02

• Can I move the anchor Point for the adjustment brush in ACR CS5

  There has never been a problem before, but the anchor point for the adjustment in ACR brush is sitting exactly where I need to see what is happening.  I can delete and start over, but if there is a way to move or hide the anchor in stil be able to adjust the setting, it would be useful to know for the next time it happens.

  You can press the V key to toggle the power switch pins.

• I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. an error message will appear saying "need help."

  I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. a pop error message saying "we met the following problems Installer failed to initialize. "Please download Adobe Support Advisor to detect the problem" I click on 'Get Adobe Support Advisor' and then I get here. Can you help me? I use the Mac operating system. I also run Adobe Photoshop CS6 unistall and cleaner, but now when I try to install it again it gives the same message

  Hi Ashish,

  Please follow the solution 2 in the link below.

  Error: "unable to install". Creative cloud office

  After that, you can install the application by following the instructions on the link below.

  Download and install Adobe Creative Cloud apps

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• Quick Start Guide for the development of AIR on iOS?

  Hello

  Is there as a starter guide for the development of AIR for iOS? I am looking for a sort of tutorial that tells me what to install and how to create a Hello World game on iOS (iPhone and iPad).

  Thank you

  http://active.tutsplus.com/tutorials/mobile/Flash-for-iPhone/

• Why use ins and out of the points for the clips?

  Hello

  I use PPCS3 and never understood the need for the ins and points for the clips.

  Always just, I took my clip (no matter how long or short) and he parried on the chronology of the sequence.

  Is this just another method or y at - it something I'm completely missing when it comes to the ins and outs?

  I guess it depends on what you are used to doing.

  Any guidance here on where the ins and outs made a big difference would be appreciated.

  Thank you

  Simon

  Simon,

  You are using and the Points on the instances of your footage on the Timeline. You're just doing it on the timeline, instead of in the Source monitor. It's a matter of how you want to work. PrPro offers many ways to do different operations. We could also use the monitor fitting to do this, if that's how they want to.

  Good luck and we hope this helps,

  Hunt

• Specify the end point for the digital using an output circular buffer

  When you use DAQmx and a NOR-DAQ for issuance of a digital signal using a circular buffer (buffer Renault). The program works and works, but when the 'DAQmx Stop Task.vi' function is called to end the task, he stops at the output buffering as soon as it is called and does not wait until the buffer pointer reaches the final value in the buffer. I would like that the program to wait until the buffer pointer is on the last value in the buffer, does anyone know how to specify this setting?

  If you need to stop on exactly the last sample output you will need a way to trigger the stop in the material.  The options available to you will depend on what hardware DAQ, you use, but here are some possibilities on the top of my head:

  1. set up a digital output redeclenchables task finished (not all hardware supports).  Set up a counter of output to issue a periodic trigger with the necessary synchronization signal such that the end result is a "continuous" digital output without interruption.  When you stop your loop, stop the task of counter - digital output ends his generation but the trigger signal will be removed and so it will not continue after that.

  2. If you have an unused extra digital output line, add it to your task.  This line should exit 0 all except the last sample.  Physically, this additional digital line in a wire line PFI and use it to trigger a meter output.  Have the output counter generate a single pulse of some long-term (long enough to ensure that the software can respond prematurely).  Use the output from the task of counter as a trigger of break for the task of digital output.  Do not start the task of the meter until you leave your loop.  Do not stop the task of digital output until you have detected in the software that the meter has been triggered.

  If you need to stop on approximately the last sample output, you could query the TotalSamplesPerChannelGenerated property after leaving your loop and only stop the task once it reaches a multiple of the size of your circular buffer.  This is no guarantee that it stops on the last sample (if you use a device on a bus with a latency higher as USB or Ethernet the non-determinisme would be worse).

  Best regards

• Starting point in the slide show screen saver

  original title: screen saver

  SLIDE SHOW

  I have a slide show for my screensaver - is there a way to keep the slideshow rotation, rather than return to his moose start point? I guess what I want is an endless looping of images in the gallery when I have time... Thank you - as you can tell, I'm not good at this

  Isn't what you want eventually return for the first starting off of too - it if turns?  Do you really mean that's not displays ALL the pictures in the Gallery, but some subset and want to include the rest of them as well?  Or you're looking for a random show type who do rotate or flip at the start point, but continues to change totally randomly?

  I'm not sure that these options are possible, but I want to make sure I understand what you want before researching it.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Starting point of the CSA

  We are deploying CSA ver5.0 in our society. I read 2 books for Cisco Press but wanted to get an idea of what real companies use as their groups. We have all the windows, all Types of desktop computers, remote desktop or Mobile and CTA. Everyone thinks it is exaggerated or under the protection of a starting point?

  The only problem we encountered so far is that the IBM portable computer touchpad driver is detected as an untrusted root kit. If someone met what I'd like to hear about your solution. TAC still works with us on this to create an exception that works.

  Thank you

  Dvergau,

  I think it is maybe too kill to a pilot group. That is where I hope you intend to start. You want to import a little, you decide what is a little, then slowly adjust and Add. What I mean is that you need to adjust these rules that block the operation. Then add a little more political and other.

  Many people have several ways of doing things. Some suggest simply use the wizard for all, many will tell you to clone all groups and modify those that don't. Cloning is a pretty smart way to keep a reference point. Yet once again, I suggest you start small and build up to the reference level.

  Regarding the rootkit, it's tough. The only way to allow the rootkits are to use the wizard. The wizard will make the hashes and application and the exception. I found a similar problem with Symantec. Leaving me the only option to disable the notification, or to add hashes on the fly.

  Hope this helps, if you need just to all creation information and politics rule. I'll help you better than I can.

  Kind regards

  Christopher

• Can I click on an object as a starting point for slide without selecting it?

  Hello

  I would like to know if there is a way to begin to drag the point on the surface of an object without selecting it.

  Thank you in advance.

  It would have helped you said what tool you drag with.

  like making a rectangle that represents the area of selection

  You're talking about what we call to make a selection rectangle.

  I'm looking for a way if I can just click on a surface of an object without actually clicking on it so I can just start dragging carefully.

  Read what you just said: '... ". Click on a surface of an object without actually clicking on it... »

  What you ask is really: is there a way of mousedown on an object with one of the selection pointers without selecting the object, in order to begin a selection rectangle?

  This is essentially what the Lasso selection tool. But it is not rectangular selections and cannot be forced to do so (no 'elastic' modifier as in Photoshop). He also disrespects of clichés, if it's important to what you're trying to do. Nor can he will strive to select entire paths he touches by pressing the Alt key, as can be done with the white pointer.

  We could probably expect black and white pointers to work like this:

  1. click on an object. (The object is selected.)

  2. press SHIFT and mousedown (not mouseup) on the object. (The object becomes unchecked.)

  3. start to drag. (Starts a selection rectangle).

  But they do not.

  Selection of Illustrator pattern is and has always been the worst class among public drawing programs. Needless to multiple tools, badly implemented, that all together can not do a single tool can do in other programs.

  Much trouble of selection is avoided in other programs by providing a "touch sensitive" toggle in other words, the ability to define a selection tool to select all its renowned keys, (such as Illustrator) or to select only objects that completely surrounds the marquee.

  For a long time, I suggested that we should be able to "convert" any path given to a selection or a path to the Cup. (Illustrator may not correctly cut its own paths, either.)

  IE7

• Recovery of start-up for the yoga 8

  Any body knows the combination of control to get to Starter for the yoga of lenovo recovery 8?

  Thank you

  Too bad I guess I figured it holding both volume up and down while turning the unit on and he gave me recovery options and so on

• "There is no end point for the end point mapper.

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  Whenever I have try and configure the accounts of FS, I get an error that says: "there is no end point to the end point mapper.  I tried to uninstall the parental control and re - install the latest version several times and I get the same error.  I created several new accounts and tried to tie but still the same error.

  Any help?

  I had the same problem and the error you mentioned above... Has been frustrating me. After working through the questions Tech above, I discovered that it was related to basic and Windows Firewall filtering engine.

  Check if your Windows Firewall is working properly, and if you can make changes. If you get an error code when you try to change your firewall settings, which could be what it is.

  I followed this to correct the BFE and Windows Firewall it retries then parental control and he went through with NO PROBLEMS of...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-B561-bc49cbdad904

  Hope this works for you as well...

• XP pro sp3 run asr, but didn't start; files for the recovery diskette could not be created

  I had previously asr has been successfully run on the same configuration but have decided to update the recovery data. I tried to restart the asr by clicking Start, all programs, accessories, system, backup tools. The Backup Wizard appears and I clicked on Advanced Mode. Then followed the backup utility page, I clicked on the ASR Wizard. The next page has been the preparation of Recovery Wizard, I clicked next and was presented with the option of backup destination and, after finishing the backup destination, I clicked Next. My page was last option; End of the ASR Wizard, I clicked Finish. Backup went into his usual preamble but almost instantly a warning box came up with the message "files for the recovery diskette can not be created." I am running xp pro sp3 as I had been for the creation of the previously successful GDR.

  I also tried using the Backup Wizard and I clicked on backup all information on this computer (this option automatically provides ASR) and followed the instructions of the wizard through to the end and the failure has been the same.

  I found a solution to my problem of ASR. If I was not able to create an asr backup, I was still able to run Ntbackup. I've saved my OS drive then ran repair with the XP Professional installation cd. Backup ASR works now.

  OK, I had to reinstall all them that updates the Knowledge Base Microsoft and also all the Service Packs. One or two of the plug-and-play applications were a bit annoying, but be as I have all the installation cd, other than being tedious, have all been re-installed and the system is now as good as new.

• Another entry point for the issue of the application

  Hello

  As I read on this KB about to enter another application

  http://supportforums.BlackBerry.com/T5/Java-development/set-up-an-alternate-entry-point-for-an-appli...

  But on the KB above, the main application is UiApplication and other entry point is not UiApplication!

  1. I wonder how to create the entry point alternative in which the two project is UiApplication

  2. for example, I have the application main who have 3 screens A, B, C. When user clicks on the icon for the main Application screens A. When the user clicks on the application of alternative entry point (another icon on the home screen), B screen. I wonder how we can do?

  Thank you.

  No, you create only one project. the ASP is set to the application descriptor.

• another entry point for the application

  Hello

  I want to create another entry point for my application... After going through various messages earlier I went to know that we can do this by selecting

  Project--> Application tab-->

  But, in a project Type tab I have only 3 options i.e. CLDC, Midlet, library and another entry for this point is turned off by default, one of my existing project into the current workspace is automatically selected it... I want to put there another project to another entry point...

  I also tried to download the image, but not due to an error downloading...

  Thanks a lot for your help.

  Have you checked this article?

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/796557/800738/800901/...